summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-omap
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'for_2.6.33rc_c' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren2010-01-085-32/+35
|\ | | | | | | omap-fixes-for-linus
| * OMAP clock/CPUFreq: add clk_exit_cpufreq_table()Paul Walmsley2010-01-083-0/+13
| | | | | | | | | | | | | | | | | | | | | | A subsequent patch adds code on OMAP2xxx to dynamically allocate the CPUFreq frequency table in clk_init_cpufreq_table(), so for it to avoid a leak, it will need a corresponding function to free the memory. This patch adds clk_exit_cpufreq_table() with generic code to call a chip-specific variant inside the clockfw_lock spinlock via struct clk_functions. Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * OMAP clock: remove incorrect EXPORT_SYMBOL()sPaul Walmsley2010-01-081-6/+0
| | | | | | | | | | | | | | | | | | | | | | The only symbols that should be exported are symbols that are to be called from loadable kernel modules, e.g., device drivers. In the context of plat-omap/clock.c, these should only be the Linux clock interface symbols as defined by include/linux/clk.h. Core code doesn't need these symbols to be exported. Also, clean up an old comment while here. Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc spacePaul Walmsley2010-01-081-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 10db25fea4c11661070b97832b8cc3d2af495092 causes the following kernel messages during N800 boot (and presumably all other 2420 boards): [ 0.000000] BUG: mapping for 0x58000000 at 0xe0000000 overlaps vmalloc space [ 0.000000] BUG: mapping for 0x59000000 at 0xe1000000 overlaps vmalloc space [ 0.000000] BUG: mapping for 0x5a000000 at 0xe2000000 overlaps vmalloc space Fix by remapping the IVA memory areas somewhere outside vmalloc space. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com>
| * OMAP2xxx IO mapping: mark DSP mappings as being 2420-onlyPaul Walmsley2010-01-082-26/+19
| | | | | | | | | | | | | | | | | | Out of the three major OMAP2 chip types, OMAP2420, OMAP2430, and OMAP3430, we only map the IVA on OMAP2420. The memory mapping is not shared between OMAP2420 and OMAP2430, so it is inappropriate to label those macros as '24XX'; this patch changes them to '2420'. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | omap3: add missing parenthesesRoel Kluin2010-01-081-1/+1
| | | | | | | | | | | | | | not(!) has a higher precedence than bit and(&). Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap1: Fix compile for omap1_bl.cTony Lindgren2010-01-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9905a43b made struct backlight_ops const. Omap was setting check_fb dynamically, which caused the following compile error: drivers/video/backlight/omap1_bl.c: In function 'omapbl_probe': drivers/video/backlight/omap1_bl.c:142: error: assignment of read-only variable 'omapbl_ops' Turns out pdata->check_fb is not being used, so just remove it to fix the compile. Cc: Emese Revfy <re.emese@gmail.com> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap1: Add 7xx clocks and pin muxes for SPICory Maccarrone2010-01-082-0/+11
| | | | | | | | | | | | | | | | | | | | | | Commit 35c9049b27040d09461bc90928ad770be7ddf661 added drivers/spi/omap_spi_100k.c. This patch add the related clocks and pin muxing entries to make the driver work on omap7xx platforms. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: Remove uninitialized warning for gpio.cTony Lindgren2010-01-081-1/+1
| | | | | | | | | | | | Flags is not used on 15xx. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: &&/|| confusion in iommu_put()Roel Kluin2010-01-081-1/+1
| | | | | | | | | | | | | | obj can't be both NULL and be an error pointer. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: gpio: Simultaneously requested rising and falling edgeCory Maccarrone2010-01-081-1/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some chips, namely any OMAP1 chips using METHOD_MPUIO, OMAP15xx and OMAP7xx, cannot be setup to respond to on-chip GPIO interrupts in both rising and falling edge directions -- they can only respond to one direction or the other, depending on how the ICR is configured. Additionally, current code forces rising edge detection if both flags are specified: if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; This change implements a toggle function that will modify the ICR to flip the direction of interrupt for IRQs that are requested with both rising and falling flags. The toggle function is not called for chips and GPIOs it does not apply to through the use of a flip_mask that's added on a per-bank basis. The mask is only set for those GPIOs where a toggle is necessary. Edge detection starts out the same as above with FALLING mode first. The toggle happens on EACH interrupt; without it, we have the following sequence of actions on GPIO transition: ICR GPIO Result 0x1 0 -> 1 (rising) Interrupt 0x1 1 -> 0 (falling) No interrupt (set ICR to 0x0 manually) 0x0 0 -> 1 (rising) No interrupt 0x0 1 -> 0 (falling) Interrupt That is, with the ICR set to 1 for a gpio, only rising edge interrupts are caught, and with it set to 0, only falling edge interrupts are caught. If we add in the toggle, we get this: ICR GPIO Result 0x1 0 -> 1 (rising) Interrupt (ICR set to 0x0) 0x0 1 -> 0 (falling) Interrupt (ICR set to 0x1) 0x1 0 -> 1 ... so, both rising and falling are caught, per the request for both (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING). Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: McBSP: Fix possible port lockoutJanusz Krzysztofik2010-01-081-3/+17
|/ | | | | | | | | | | In its current form, the omap_mcbsp_request() function can return after irq_request() failure without any cleanups, effectively locking out the port forever with clocks left running. Fix it. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* const: constify remaining dev_pm_opsAlexey Dobriyan2009-12-152-2/+2
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mfd: Add support for twl6030 irq frameworkBalaji T K2009-12-141-1/+15
| | | | | | | | | | | | | This patch adds support for phoenix interrupt framework. New iInterrupt status register A, B, C are introduced in Phoenix and are cleared on write. Due to the differences in interrupt handling with respect to TWL4030, twl6030-irq.c is created for TWL6030 PMIC Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* omap3: Fix OMAP35XX_REV macrosSanjeev Premi2009-12-111-6/+6
| | | | | | | | | | | | | | In original implementation, the revision passed to these macros contained revision number in lower nibble. But, later the revision bits (OMAP_REVBITS_XX) were defined to use omap_revision[15:08] where revision number is containied in higher nibble. This patch updates the macros; else incorrect revision is detected for OMAP35xx devices. Signed-off-by: Sanjeev Premi <premi@ti.com>
* omap3: id code detection 3525 vs 3515Sergey Lapin2009-12-111-4/+4
| | | | | | | | | The runtime detection of OMAP3515 and OMAP3525 was reversed. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: header: remove unused data-typevikram pandita2009-12-111-9/+0
| | | | | | | | | | | | | | | | Remove unused data type omap_gpio_switch_config Thereby also get rid of following sparse warnings: arch/arm/plat-omap/include/plat/board.h :121:20: warning: dubious bitfield without explicit `signed' or `unsigned' arch/arm/plat-omap/include/plat/board.h :122:19: warning: dubious bitfield without explicit `signed' or `unsigned' arch/arm/plat-omap/include/plat/board.h :123:24: warning: dubious bitfield without explicit `signed' or `unsigned' Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: arch/arm/plat-omap/devices.c - sort alphabeticallyLadislav Michl2009-12-111-34/+34
| | | | | | | | Comment in omap_init_devices asks to keep init calls and their implementations in alphabetical order, so let it be that way. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Correcting GPMC_CONFIG1_DEVICETYPE_NANDVimal Singh2009-12-111-1/+1
| | | | | | | | For NAND devices '2' should be used with GPMC_CONFIG1_DEVICETYPE instead of '1'. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3: serial - allow platforms specify which UARTs to initializeMika Westerberg2009-12-111-0/+1
| | | | | | | | | | | This patch adds new function: omap_serial_init_port(port) that can be used to initialize only selected UARTs as serial ports. Platforms can then in their board files call this function instead of omap_serial_init() if they don't want to use all UARTs as serial ports. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP4: AuxCoreBoot registers only accessible in secure modeSantosh Shilimkar2009-12-111-0/+2
| | | | | | | | | The AuxCoreBoot0 and AuxCoreBoot1 can be only accessed in secure mode. Replace the current code with secure monitor API's to access/modify these registers. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP4: Fix SRAM base and sizeSantosh Shilimkar2009-12-111-3/+9
| | | | | | | | This patch fixes the public sram base address and available size on OMAP4430. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP4: Fix cpu detectionSantosh Shilimkar2009-12-112-4/+7
| | | | | | | | | | | | | This patch fixes the OMAP4430 cpu detection. The IC rev detection is done with hawkeye and rev. Note that rev does not map directly to defined processor revision numbers as ES1.0 uses value 0.It also fixes the SCM base address to read the correct ID_CODE register. Also the cpu_is_omap44xx() and cpu_is_omap443x() correctly populated instead of always being true Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap1: I2C mux and clocks for omap7xxCory Maccarrone2009-12-111-0/+4
| | | | | | | | This change adds MUX pin configuration and clocks for I2C support to OMAP 730 and 850-based devices. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap1: Add omap7xx USB supportCory Maccarrone2009-12-112-1/+9
| | | | | | | | | | This change implements USB client side support into the HTC Herald board configuration. It uses a similar, but updated algorithm to initialize the USB as is used in the linwizard project. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap1: DMA: move LCD related code from plat-omap to mach-omap1Janusz Krzysztofik2009-12-112-458/+12
| | | | | | | | | | | | | | | All of the LCD DMA code in plat-omap/dma.c appears to be OMAP1-only (and apparently only is available on a subset of OMAP1 chips). Move this code to mach-omap1/lcd_dma.c. Tested on OMAP1510 Amstrad Delta. Compile-tested with omap_generic_2420_defconfig. Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: use smc91x_platdata to setup smc91xLadislav Michl2009-12-111-0/+10
| | | | | | | | Use smc91x_platdata to setup smc91x, so we can get rid of OMAP specific stuff in smc91x driver Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: mux: Remove old mux code for 34xxTony Lindgren2009-12-111-224/+2
| | | | | | Remove old mux code for 34xx Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Split i2c platform init for mach-omap1 and mach-omap2Tony Lindgren2009-12-113-55/+42
| | | | | | | | | | | | Otherwise we cannot limit new mux code to mach-omap2. The same signal names should eventually work for other omaps under mach-omap2. Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP, just OMAP_PIN_INPUT is enough. Cc: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: mux: Add new style pin multiplexing code for omap3Tony Lindgren2009-12-111-2/+6
| | | | | | | | | | | | | | | | | | | | | | Initially only for 34xx. This code allows us to: - Make the code more generic as the omap internal signal names can stay the same across omap generations for some devices - Map mux registers to GPIO registers that is needed for dynamic muxing of pins during off-idle - Override bootloader mux values via kernel cmdline using omap_mux=some.signa1=0x1234,some.signal2=0x1234 - View and set the mux registers via debugfs if CONFIG_DEBUG_FS is enabled Cc: Mike Rapoport <mike@compulab.co.il> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api'sRajendra Nayak2009-12-112-21/+1
| | | | | | | | | | | | This patch adds dummy hooks for OMAP4 dpll api's. Removes dummy hooks for clkdev api's and enables CLKDEV for OMAP4. Also comments clockdomain calls from within the clock framework as its not supported yet for OMAP4. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
* ARM: OMAP4: PM: OMAP4 clock tree and clkdev registrationRajendra Nayak2009-12-112-1/+4
| | | | | | | | | | | This patch defines all the clock nodes in OMAP4430 platform. All the clock node structs and the clkdev table is autogenerated using a python script (gen_clock_tree.py) developed by Paul Walmsley, Benoit Cousson and Rajendra Nayak. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
* ARM: OMAP4: PM: Fix the PRM and CM base addressesRajendra Nayak2009-12-114-7/+7
| | | | | | | | | This patch fixes the PRM and CM base addresses and adds a new CM2 base address for OMAP4 Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
* OMAP: omap_device: track latency in nanosecondsKevin Hilman2009-12-112-6/+6
| | | | | | | | Rather than having to do a usecs = nsecs / NSECS_PER_USEC to track latency in usecs, just track it in nanoseconds. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP: omap_device: fix nsec/usec conversion in latency calculationsKevin Hilman2009-12-111-2/+2
| | | | | | | | | | | | | Use usecs = nsecs / NSEC_PER_USEC; instead of usecs = nsecs * NSEC_PER_USEC; Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP: omap_device: use read_persistent_clock() instead of getnstimeofday()Kevin Hilman2009-12-111-4/+4
| | | | | | | | | | | During suspend and resume, when omap_device deactivation and activation is happening, the timekeeping subsystem has likely already been suspended. Thus getnstimeofday() will fail and trigger a WARN(). Use read_persistent_clock() instead of getnstimeofday() to avoid this. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP: omap_device: use UINT_MAX for default wakeup latency limitKevin Hilman2009-12-111-1/+1
| | | | | | | | The _dev_wakeup_lat_limit field of struct omap_device is u32, so use UINT_MAX instead of INT_MAX for the default maximum. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP: omap_device: add to_omap_device() macroKevin Hilman2009-12-111-1/+3
| | | | | | | | | Following the model of to_platform_device(), add to_omap_device() macro so a platform_device pointer can be converted into an omap_device pointer. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP hwmod: add names to module MPU IRQ linesPaul Walmsley2009-12-111-2/+16
| | | | | | | | | | | | | | | Replace the existing u8 array of module MPU IRQ lines with a struct that includes a name - similar to the existing struct omap_hwmod_dma_info. Device drivers can then use platform_get_resource_byname() to retrieve specific IRQs without nasty dependencies on array ordering. Thanks to Benoît Cousson <b-cousson@ti.com> and Kevin Hilman <khilman@deeprootsystems.com> for feedback on this approach. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handlingPaul Walmsley2009-12-111-1/+7
| | | | | | | | | | | | | | | | | | | | | This patch fills in the OCP_SYSCONFIG.AUTOIDLE handling in the OMAP hwmod code. After this patch, the hwmod code will set the module AUTOIDLE bit (generally <module>.OCP_SYSCONFIG.AUTOIDLE) to 1 by default upon enable. If the hwmod flag HWMOD_NO_OCP_AUTOIDLE is set, AUTOIDLE will be set to 0 upon enable. Upon module disable, AUTOIDLE will be set to 1. Enabling module autoidle should save some power. The only reason to not set the OCP_SYSCONFIG.AUTOIDLE bit is if there is a bug in the module RTL, e.g., the MPUINTC block on OMAP3. Comments from Kevin Hilman <khilman@deeprootsystems.com> inspired this patch, and Kevin tested an earlier version of this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP clock/hwmod: fix off-by-one errorsPaul Walmsley2009-12-111-0/+20
| | | | | | | | | | | | | | Fix loop bailout off-by-one bugs reported by Juha Leppänen <juha_motorsportcom@luukku.com>. This second version incorporates comments from Russell King <linux@arm.linux.org.uk>. A new macro, 'omap_test_timeout', has been created, with cleaner code, and existing code has been converted to use it. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Juha Leppänen <juha_motorsportcom@luukku.com> Cc: Russell King <linux@arm.linux.org.uk>
* OMAP3: PM: Fix for MPU power domain MEM BANK positionThara Gopinath2009-12-111-1/+4
| | | | | | | | | | MPU power domain bank 0 bits are displayed in position of bank 1 in PWRSTS and PREPWRSTS registers. So read them from correct position Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP powerdomain: rearrange struct powerdomain to save some memoryPaul Walmsley2009-12-111-3/+3
| | | | | | | This patch rearranges the order of structure members in struct powerdomain to avoid wasting memory due to alignment restrictions. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP powerdomain/PM: use symbolic constants for the max number of power statesPaul Walmsley2009-12-111-2/+4
| | | | | | | Replace some bare constants with power states. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP clockdomain/powerdomain: remove CONFIG_OMAP_DEBUG_{CLOCK,POWER}DOMAINPaul Walmsley2009-12-111-42/+20
| | | | | | | | | | | | | | Avoid cluttering the Kconfig space with debug options that are rarely used. These can now be enabled and disabled by patching the "#undef DEBUG" in the source files with "#define DEBUG", conforming to the practice for the rest of the linux-omap code. Also, while we're here, some lines in plat-omap/Kconfig use sets of leading spaces when those lines should start with tabs. Convert most of them to use tabs. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
* OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.cPaul Walmsley2009-12-111-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | The OMAP1 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the mpu_rate data structures out into their own files, opp.h and opp_data.c. In the long run, these mpu_rate tables should be replaced with OPP code. Also includes a patch from Felipe Balbi <felipe.balbi@nokia.com> to mark omap1_clk_functions as __initdata to avoid a section warning: http://patchwork.kernel.org/patch/64366/ Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Nishanth Menon <nm@ti.com>
* OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*Paul Walmsley2009-12-111-0/+2
| | | | | | | | | | | | | | | | | | | | | The OMAP2 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the prcm_config data structures out into their own files, opp2xxx.h and opp24{2,3}0_data.c, and only build in the OPP tables for the target device. This should save some memory. In the long run, these prcm_config tables should be replaced with OPP code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Nishanth Menon <nm@ti.com>
* OMAP3 clock: convert clock34xx.h to clock34xx_data.cPaul Walmsley2009-12-111-0/+37
| | | | | | | | | | | | The OMAP3 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King <linux@arm.linux.org.uk> proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk>
* Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds2009-12-107-401/+750
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: MAINTAINERS: Add OMAP2/3 DSS and OMAPFB maintainer OMAP: SDP: Enable DSS2 for OMAP3 SDP board OMAP: DSS2: Taal DSI command mode panel driver OMAP: DSS2: Add generic and Sharp panel drivers OMAP: DSS2: omapfb driver OMAP: DSS2: DSI driver OMAP: DSS2: SDI driver OMAP: DSS2: RFBI driver OMAP: DSS2: Video encoder driver OMAP: DSS2: DPI driver OMAP: DSS2: DISPC OMAP: DSS2: Add more core files OMAP: DSS2: Display Subsystem Driver core OMAP: DSS2: Documentation for DSS2 OMAP: Add support for VRFB rotation engine OMAP: Add VRAM manager OMAP: OMAPFB: add omapdss device OMAP: OMAPFB: split omapfb.h OMAP2: Add funcs for writing SMS_ROT_* registers
| * OMAP: DSS2: omapfb driverTomi Valkeinen2009-12-091-1/+46
| | | | | | | | Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
OpenPOWER on IntegriCloud