summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/mm.h
Commit message (Collapse)AuthorAgeFilesLines
* ARM: Fix ioremap() of address zeroRussell King2012-08-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Murali Nalajala reports a regression that ioremapping address zero results in an oops dump: Unable to handle kernel paging request at virtual address fa200000 pgd = d4f80000 [fa200000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-g3b5f728-00009-g638207a #13) PC is at msm_pm_config_rst_vector_before_pc+0x8/0x30 LR is at msm_pm_boot_config_before_pc+0x18/0x20 pc : [<c0078f84>] lr : [<c007903c>] psr: a0000093 sp : c0837ef0 ip : cfe00000 fp : 0000000d r10: da7efc17 r9 : 225c4278 r8 : 00000006 r7 : 0003c000 r6 : c085c824 r5 : 00000001 r4 : fa101000 r3 : fa200000 r2 : c095080c r1 : 002250fc r0 : 00000000 Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 25180059 DAC: 00000015 [<c0078f84>] (msm_pm_config_rst_vector_before_pc+0x8/0x30) from [<c007903c>] (msm_pm_boot_config_before_pc+0x18/0x20) [<c007903c>] (msm_pm_boot_config_before_pc+0x18/0x20) from [<c007a55c>] (msm_pm_power_collapse+0x410/0xb04) [<c007a55c>] (msm_pm_power_collapse+0x410/0xb04) from [<c007b17c>] (arch_idle+0x294/0x3e0) [<c007b17c>] (arch_idle+0x294/0x3e0) from [<c000eed8>] (default_idle+0x18/0x2c) [<c000eed8>] (default_idle+0x18/0x2c) from [<c000f254>] (cpu_idle+0x90/0xe4) [<c000f254>] (cpu_idle+0x90/0xe4) from [<c057231c>] (rest_init+0x88/0xa0) [<c057231c>] (rest_init+0x88/0xa0) from [<c07ff890>] (start_kernel+0x3a8/0x40c) Code: c0704256 e12fff1e e59f2020 e5923000 (e5930000) This is caused by the 'reserved' entries which we insert (see 19b52abe3c5d7 - ARM: 7438/1: fill possible PMD empty section gaps) which get matched for physical address zero. Resolve this by marking these reserved entries with a different flag. Cc: <stable@vger.kernel.org> Tested-by: Murali Nalajala <mnalajal@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: dma-mapping: remove custom consistent dma regionMarek Szyprowski2012-07-301-0/+3
| | | | | | | | | | | | | | This patch changes dma-mapping subsystem to use generic vmalloc areas for all consistent dma allocations. This increases the total size limit of the consistent allocations and removes platform hacks and a lot of duplicated code. Atomic allocations are served from special pool preallocated on boot, because vmalloc areas cannot be reliably created in atomic context. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Minchan Kim <minchan@kernel.org>
* ARM: fix warning caused by wrongly typed arm_dma_limitRussell King2012-07-051-1/+1
| | | | | | | | | | | arch/arm/mm/init.c: In function 'arm_memblock_init': arch/arm/mm/init.c:380: warning: comparison of distinct pointer types lacks a cast by fixing the typecast in its definition when DMA_ZONE is disabled. This was missed in 4986e5c7c (ARM: mm: fix type of the arm_dma_limit global variable). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: mm: fix type of the arm_dma_limit global variableMarek Szyprowski2012-06-111-1/+1
| | | | | | | | | | | arm_dma_limit stores physical address of maximal address accessible by DMA, so the phys_addr_t type makes much more sense for it instead of u32. This patch fixes the following build warning: arch/arm/mm/init.c:380: warning: comparison of distinct pointer types lacks a cast Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
* ARM: integrate CMA with DMA-mapping subsystemMarek Szyprowski2012-05-211-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for CMA to dma-mapping subsystem for ARM architecture. By default a global CMA area is used, but specific devices are allowed to have their private memory areas if required (they can be created with dma_declare_contiguous() function during board initialisation). Contiguous memory areas reserved for DMA are remapped with 2-level page tables on boot. Once a buffer is requested, a low memory kernel mapping is updated to to match requested memory access type. GFP_ATOMIC allocations are performed from special pool which is created early during boot. This way remapping page attributes is not needed on allocation time. CMA has been enabled unconditionally for ARMv6+ systems. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Michal Nazarewicz <mina86@mina86.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Rob Clark <rob.clark@linaro.org> Tested-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by: Robert Nelson <robertcnelson@gmail.com> Tested-by: Barry Song <Baohua.Song@csr.com>
* ARM: pgtable: get rid of TOP_PTE()Russell King2012-01-261-4/+4
| | | | | | | | | Get rid of the TOP_PTE() macro as we now have proper accessor functions instead. No one should be directly referencing the top pte table anymore. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: pgtable: provide get_top_pte() to complement set_top_pte()Russell King2012-01-261-0/+5
| | | | | | | | Provide get_top_pte() to complement set_top_pte(), moving the only users of TOP_PTE to arch/arm/mm/mm.h. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: pgtable: consolidate set_pte_ext(TOP_PTE,...) + tlb flushRussell King2012-01-261-0/+6
| | | | | | | | | | | | | A number of places establish a PTE in our top page table and immediately flush the TLB. Rather than having this at every callsite, provide an inline function for this purpose. This changes some global tlb flushes to be local; each time we setup one of these mappings, we always do it with preemption disabled which would prevent us migrating to another CPU. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: pgtable: move TOP_PTE address definitions to arch/arm/mm/mm.hRussell King2012-01-261-0/+13
| | | | | | | | | Move the TOP_PTE address definitions to one central place so that it's easy to discover what they're being used for. This helps to ensure that there are no overlaps. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: add generic ioremap optimization by reusing static mappingsNicolas Pitre2011-11-261-0/+14
| | | | | | | | | | | | Now that we have all the static mappings from iotable_init() located in the vmalloc area, it is trivial to optimize ioremap by reusing those static mappings when the requested physical area fits in one of them, and so in a generic way for all platforms. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Kevin Hilman <khilman@ti.com> Tested-by: Jamie Iles <jamie@jamieiles.com>
* ARM: 7076/1: LPAE: Add (pte|pmd)val_t type definitions as u32Catalin Marinas2011-10-061-2/+2
| | | | | | | | | | | | | This patch defines the (pte|pmd)val_t as u32 and changes the page table types to be based on these. The PMD bits are converted to the corresponding type using the _AT macro. The flush_pmd_entry/clean_pmd_entry argument was changed to (void *) to allow them to be used with both PGD and PMD pointers and avoid code duplication. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: dma: replace ISA_DMA_THRESHOLD with a variableRussell King2011-07-121-0/+6
| | | | | | | | | ISA_DMA_THRESHOLD has been unused by non-arch code, so lets now get rid of it from ARM by replacing it with arm_dma_zone_mask. Move dma_supported() and dma_set_mask() out of line, and have dma_supported() check this new variable instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: kill pmd_off()Russell King2011-05-261-6/+1
| | | | | | | pmd_off() has only one user, so lets consolidate this into its only user. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: pgtable: add pud-level codeRussell King2011-02-211-1/+1
| | | | | | | | | | Add pud_offset() et.al. between the pgd and pmd code in preparation of using pgtable-nopud.h rather than 4level-fixup.h. This incorporates a fix from Jamie Iles <jamie@jamieiles.com> for uaccess_with_memcpy.c. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: pgtable: introduce pteval_t to represent a pte valueRussell King2010-11-261-1/+1
| | | | | | This makes everywhere dealing with pte values use the same type. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: Convert platform reservations to use LMB rather than bootmemRussell King2010-07-271-2/+1
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: initial LMB trialRussell King2010-07-271-1/+1
| | | | | Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: Move platform memory reservations out of generic codeRussell King2010-07-161-1/+2
| | | | | | | Move the platform specific bootmem memory reservations out of arch/arm/mm/mmu.c into their respective platform files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: Remove DISCONTIGMEM supportRussell King2010-07-161-3/+1
| | | | | | | Everything should now be using sparsemem rather than discontigmem, so remove the code supporting discontigmem from ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: Move memory mapping into mmu.cRussell King2010-05-151-3/+0
| | | | | Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: Reduce __flush_dcache_page() visibilityRussell King2009-12-041-0/+2
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] fixmap supportNicolas Pitre2009-03-151-2/+1
| | | | | | | | | | | | | | | | | | | | | | This is the minimum fixmap interface expected to be implemented by architectures supporting highmem. We have a second level page table already allocated and covering 0xfff00000-0xffffffff because the exception vector page is located at 0xffff0000, and various cache tricks already use some entries above 0xffff0000. Therefore the PTEs covering 0xfff00000-0xfffeffff are free to be used. However the XScale cache flushing code already uses virtual addresses between 0xfffe0000 and 0xfffeffff. So this reserves the 0xfff00000-0xfffdffff range for fixmap stuff. The Documentation/arm/memory.txt information is updated accordingly, including the information about the actual top of DMA memory mapping region which didn't match the code. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] use asm/sections.hRussell King2008-12-011-2/+0
| | | | | | | | Update to use the asm/sections.h header rather than declaring these symbols ourselves. Change __data_start to _data to conform with the naming found within asm/sections.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] rationalize memory configuration code some moreNicolas Pitre2008-11-281-1/+1
| | | | | | | | | | | | | | | Currently there are two instances of struct meminfo: one in kernel/setup.c marked __initdata, and another in mm/init.c with permanent storage. Let's keep only the later to directly populate the permanent version from arm_add_memory(). Also move common validation tests between the MMU and non-MMU cases into arm_add_memory() to remove some duplication. Protection against overflowing the membank array is also moved in there in order to cover the kernel cmdline parsing path as well. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'ptebits' into develRussell King2008-10-091-1/+0
|\ | | | | | | | | | | Conflicts: arch/arm/Kconfig
| * [ARM] remove 'prot_pte_ext' from memory type tableRussell King2008-10-011-1/+0
| | | | | | | | | | | | | | This member is now redundant; the memory type is encoded in the Linux PTE bits. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [ARM] clean up a load of old declarationsRussell King2008-09-061-0/+2
|/ | | | | | ... some of which are now in linux/*.h headers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] mm 6: allow mem_types table to specify extended pte attributesRussell King2007-04-211-0/+1
| | | | | | | | Add prot_pte_ext to the mem_types table to allow the extended pte attributes to be passed to set_pte_ext(), thereby permitting us to specify memory type information for the hardware PTE entries. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] mm 5: Use mem_types table in ioremapRussell King2007-04-211-0/+9
| | | | | | | We really want to be using the memory type table in ioremap, so we only have to do the CPU type fixups in one place. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Fix nommu buildRussell King2006-11-301-0/+5
| | | | | | | Fix warnings and errors in arch/arm/mm for nommu build. Remove commented out function prototype in pgtable-nommu.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Move rest of MMU setup code from mm-armv.c to mmu.cRussell King2006-09-271-1/+0
| | | | | | | | | If we're going to have mmu.c for code which is specific to the MMU machines, we might as well move the other MMU initialisation specific code from mm-armv.c into this new file. This also allows us to make some functions static. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Split ARM MM initialisation for !mmuRussell King2006-09-271-0/+4
| | | | | | | Move the MMU specific code from init.c into mmu.c, and add nommu fixups to nommu.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Cleanup arch/arm/mm a littleRussell King2006-09-201-0/+19
Move top_pmd into arch/arm/mm/mm.h - nothing outside arch/arm/mm references it. Move the repeated definition of TOP_PTE into mm/mm.h, as well as a few function prototypes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud