summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-versatile
Commit message (Collapse)AuthorAgeFilesLines
* [ARM] 4454/1: Use word accesses in Versatile PCI config readsAndrzej Zaborowski2007-07-021-1/+4
| | | | | | | | | | | | ARM Versatile PCI config reads of one byte width have the lowest two bits of the address cleared and result in reading from a wrong place in the config space. This change is to use word size accesses like it is done for halfword reads. Byte reads are used for retrieving the IRQ number of a PCI device and the problem was not exposed until 2.6.20 because the value read was discarded in drivers/pci/setup-irq.c (recently fixed). Signed-off-by: Andrzej Zaborowski <andrew@openedhand.com> Acked-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Add IRQF_IRQPOLL flag on armBernhard Walle2007-05-081-1/+1
| | | | | | | | | | | | Add IRQF_IRQPOLL for each timer interrupt. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [ARM] 4261/1: clockevent support for Versatile platformKevin Hilman2007-04-211-10/+58
| | | | | | | Update Versatile platform to use new clockevent infrastructure. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4260/1: clocksource support for Versatile platformKevin Hilman2007-04-211-41/+34
| | | | | | | Update Versatile to use new clocksource infrastructure for basic timekeeping. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Remove needless linux/ptrace.h includesRussell King2007-04-211-1/+0
| | | | | | | | | Lots of places in arch/arm were needlessly including linux/ptrace.h, resumably because we used to pass a struct pt_regs to interrupt handlers. Now that we don't, all these ptrace.h includes are redundant. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* i2c: New ARM Versatile/Realview bus driverRussell King2006-12-101-0/+14
| | | | | | | | Add support for the I2C bus found on the ARM Versatile and Realview platforms. The I2C bus has a RTC and optionally some EEPROMs attached. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
*-. [ARM] Merge individual ARM sub-treesRussell King2006-12-072-17/+19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge: Atmel AT91RM9200 and AT91SAM9260 changes General ARM developments Disconfiguous memory cleanups 64-bit/32-bit division and sched_clock extension patches EP93xx support changes IOP support changes Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * [ARM] 3980/1: extend the ARM Versatile sched_clock implementation from 32 to ↵Nicolas Pitre2006-12-071-4/+10
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | 63 bit period This provides a 63 bit clock counter guaranteed to be monotonic over a period of 35583 days instead of a clock wrap every 179 seconds, as long as sched_clock() is called at least once every 89 seconds. This should not be a problem in practice, although a kernel timer could be scheduled every 80 seconds for example simply to call sched_clock() making sure top bits are always synchronized if need be. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] Fix Versatile PB initialisation to use .init_machineRussell King2006-11-301-11/+7
| | | | | | | | | | | | | | | | | | There's no point having the Versatile PB initialisation using an arch_initcall() and then checking whether it's running on a Versatile PB board - this is what the .init_machine function pointer in the machine description is for. Use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] Remove compatibility layer for ARM irqsRussell King2006-11-301-2/+2
|/ | | | | | | | | | | | set_irq_chipdata -> set_irq_chip_data get_irq_chipdata -> get_irq_chip_data do_level_IRQ -> handle_level_irq do_edge_IRQ -> handle_edge_irq do_simple_IRQ -> handle_simple_irq irqdesc -> irq_desc irqchip -> irq_chip Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] arm-versatile iomem annotationsAl Viro2006-10-112-18/+18
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Initial blind fixup for arm for irq changesLinus Torvalds2006-10-061-5/+5
| | | | | | | Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ARM] 3860/1: Versatile PCI config byte accessesPaul Brook2006-09-271-1/+0
| | | | | | | | | | | | The ARM Versatile board PCI config space read routines are broken for byte accesses. The access uses a byte read, so masking the bottom two bits of the address is wrong. I guess this is a cut/paste error from the the halfword code which uses aligned word access+shift+mask. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3752/1: fix versatile flash resource mapYoav Steinberg2006-08-131-1/+1
| | | | | | | | | Patch from Yoav Steinberg Flash resource mapping for versatile machine included one extra byte for the end address. This results in failure to map other resources on physical address directly after the NOR flash. Signed-off-by: Yoav Steinberg <yoav@monfort.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3739/1: genirq updates: irq_chip, add and use irq_chip.nameDavid Brownell2006-08-011-1/+2
| | | | | | | | | | | | | | | | | | | Patch from David Brownell ARM genirq cleanups/updates: - Start switching platforms to newer APIs * use "irq_chip" name, not "irqchip" * providing irq_chip.name - Show irq_chip.name in /proc/interrupts, like on x86. This update a bit more than half of the ARM code. The irq_chip.name values were chosen to match docs (if I have them) or be otherwise obvious ("FPGA", "CPLD", or matching the code). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Allow Versatile to be built for AB and PBRussell King2006-07-111-7/+4
| | | | | | | | | | | | | | | If a configuration was chosen to support both the Versatile AB and PB boards, the result would write to registers not available on the PB version of the board. Resolve this by using machine_is_xxx(). Also, for the CLCD, despite how the code looks, both the AB and PB access the same location to control the clock rate - it's just called something different between the two board versions. Invent our own name for this location and use it unconditionally. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: fixup irqflags breakage after ARM genirq mergeThomas Gleixner2006-07-021-1/+1
| | | | | | | | | | The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-304-4/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [ARM] Fix Integrator and Versatile interrupt initialisationRussell King2006-06-101-3/+2
| | | | | | | | | | Both Integrator and Versatile were using set_irq_handler() and enable_irq(), and working around the initialisation of the chained interrupt, instead of the more correct set_irq_chained_handler() function. Fix Integrator and Versatile to use the right function, and remove these work-arounds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Adapt vic.c to allow for multiple VICs in a system.Russell King2006-03-211-1/+1
| | | | | | | Some SoCs have multiple VIC devices. Adapt the generic vic code to allow multiple implementations to be handled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3340/1: Fix the PCI setup for direct master access to SDRAMCatalin Marinas2006-02-221-45/+48
| | | | | | | | | | | | | | Patch from Catalin Marinas The initial code did not configure the inbound memory windows for direct master access to the SDRAM. This patch creates a 1:1 mapping between the Versatile/PB PCI memory windows and its SDRAM. Note that an updated FPGA image is needed for Versatile/PB since the original windows were 1MB and not able to cover the whole SDRAM (now extended to 256MB). The patch also fixes the PCI IRQ mapping for slot #2. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Separate VIC (vectored interrupt controller) support from VersatileRussell King2006-01-131-53/+5
| | | | | | | Other machines may wish to make use of the VIC support code, so move it to arch/arm/common. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Remove useless 'default n' from Kconfig filesRussell King2006-01-131-1/+0
| | | | | | The default is already 'n' so there's no need to explicitly state it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2)Nicolas Pitre2006-01-132-2/+0
| | | | | | | | | | | | Patch from Nicolas Pitre This field is redundent since it must be equal to PHYS_OFFSET anyway. Now that no code uses it anymore, mark it deprecated and remove all initializations from the tree. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Convert some arm semaphores to mutexesArjan van de Ven2006-01-121-7/+8
| | | | | | | | The arm clock semaphores are strict mutexes, convert them to the new mutex implementation Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Move asm/hardware/clock.h to linux/clk.hRussell King2006-01-071-1/+1
| | | | | | | This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Move AMBA include files to include/linux/amba/Russell King2006-01-074-5/+5
| | | | | | | | | Since the ARM AMBA bus is used on MIPS as well as ARM, we need to make the bus available for other architectures to use. Move the AMBA include files from include/asm-arm/hardware/ to include/linux/amba/ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Remove clk_use()/clk_unuse()Russell King2006-01-031-11/+0
| | | | | | | | | It seems that clk_use() and clk_unuse() are additional complexity which isn't required anymore. Remove them from the clock framework to avoid the additional confusion which they cause, and update all ARM machine types except for OMAP. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds2005-10-311-0/+1
|\ | | | | | | Manual #include fixups for clashes - there may be some unnecessary
| * Create platform_device.h to contain all the platform device details.Russell King2005-10-291-0/+1
| | | | | | | | | | | | | | | | Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] fix missing includesTim Schmielau2005-10-301-0/+1
|/ | | | | | | | | | | | | | | | | | | | | I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ARM] 2995/1: Replace map_desc.physical with map_desc.pfn: VersatileDeepak Saxena2005-10-281-13/+70
| | | | | | | | | Patch from Deepak Saxena Versatile map_desc.pfn conversion Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2005-09-302-2/+0
|\
| * [ARM] Don't include mach-types.h unnecessarilyRussell King2005-09-292-2/+0
| | | | | | | | | | | | | | | | | | It's pointless to include mach-types.h if you're not going to use anything from it. These references were removed as a result of: grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [PATCH] arm/versatile iomem annotationsAl Viro2005-09-291-21/+22
|/ | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ARM] Wrap calls to descriptor handlersRussell King2005-09-041-1/+1
| | | | | | | | | | This is part of Thomas Gleixner's generic IRQ patch, which converts ARM to use the generic IRQ subsystem. Here, we wrap calls to desc->handler() in an inline function, desc_handle_irq(). This reduces the size of Thomas' patch since the changes become more localised. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: Remove machine description macrosRussell King2005-07-032-12/+16
| | | | | | | Remove the pointless machine description macros, favouring C99 initialisers instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: Convert ARM timer implementations to use readl/writelRussell King2005-06-291-37/+24
| | | | | | | | | | | | Convert ARMs timer implementations to use readl/writel instead of accessing the registers via a struct. People have recently asked if accessing timers via a structure is the "right way" and its not the Linux way. So fix this code to conform to "The Linux Way"(tm). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
* [PATCH] ARM: Add SA_TIMER flag to timer interruptsRussell King2005-06-261-2/+2
| | | | | | | VST needs to know which timer handler is for the timer interrupt. Mark all timer interrupts with the SA_TIMER flag. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: 2693/1: Add PCI support for Versatile/PBCatalin Marinas2005-06-203-5/+370
| | | | | | | | | | Patch from Catalin Marinas This patch adds PCI support for the Versatile PB926 platform. Signed-off-by: Colin King Signed-off-by: Catalin Marinas Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: 2712/1: Fix the RGB order for the Versatile CLCDCatalin Marinas2005-06-161-1/+1
| | | | | | | | | | | Patch from Catalin Marinas The current red and blue colours on the Versatile CLCD are reversed when the 5:6:5 mode is used. The patch sets the proper bit in the SYS_CLCD register value. Signed-off-by: Catalin Marinas Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-169-0/+1319
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud