summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'omap-board-for-v3.5' of ↵Olof Johansson2012-05-103-3/+31
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards Board specific changes for omap. Note that these are based on omap-pm-regulator-for-v3.5 as both branches are adding twl regulators. By Paul Gortmaker (8) and others via Linus Torvalds (38) and others * tag 'omap-board-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: OMAP: omap4panda: Use common configuration for V1V8, V2V1 supplies OMAP: 4430SDP: Use common configuration for V1V8, V2V1 supplies OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configuration ARM: OMAP: Mark Beagleboard-xM MMC bus as 4-bit Add MSUB support for the LogicPD OMAP3530 DevKits ARM: OMAP: rx51: Platform support for lis3lv02d accelerometer ARM: OMAP2+: craneboard: register emac device ARM: OMAP4: board-omap4panda: Register platform device for HDMI audio codec ARM: OMAP4: board-4430sdp: Register platform device for HDMI audio codec ARM: OMAP: devices: Register platform devices for HDMI audio ARM: OMAP3: igep0020: Add support for Micron NAND Flash storage memory ARM: OMAP2+: nand: Make board_onenand_init() visible to board code ARM: OMAP3: cm-t35: add support for power off ARM: OMAP: WiLink platform data for the PandaBoard ARM: OMAP2PLUS: Enable HIGHMEM ARM: OMAP: omap2plus_defconfig: Enable ehci-omap and sms95xx support Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: PXA2xx: MFP: fix potential direction bugIgor Grinberg2012-04-271-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pins configured as input and have MFP_LPM_DRIVE_* flag set, can have a wrong output value for some period of time (spike) during the suspend sequence. This can happen because the direction of the pins (GPDR) is set by software and the output level is set by hardware (PGSR) at a later stage. Fix the above potential bug by setting the output levels first. Also save the actual levels of the pins before the suspend and restore them after the resume, but before the direction settings take place, so the same bug as described above will not happen in the resume sequence. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
| * ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUTIgor Grinberg2012-04-272-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pins that have MFP_LPM_KEEP_OUTPUT set and are configured for output must retain the output state in low power mode. Currently, the pin direction configuration is overrided with values in gpdr_lpm[] array and do not obey the MFP_LPM_KEEP_OUTPUT setting. Fix the above bug and add some documentation to clarify the MFP_LPM_KEEP_OUTPUT setting purpose. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
| * ARM: pxa: fix gpio wakeup settingRobert Jarzmik2012-04-271-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In 3.3, gpio wakeup setting was broken. The call enable_irq_wake() didn't set up the PXA gpio registers (PWER, ...) anymore. Fix it at least for pxa27x. The driver doesn't seem to be used in pxa25x (weird ...), and the fix doesn't extend to pxa3xx and pxa95x (which don't have a gpio_set_wake() available). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
* | ARM: pxa: Add standard UART to hx4700_pin_config[]Paul Parsons2012-05-051-0/+4
| | | | | | | | | | | | | | | | | | | | | | Add the two standard UART signals (GPIO46_STUART_RXD, GPIO47_STUART_TXD) to the initial mfp config table hx4700_pin_config[] passed to pxa2xx_mfp_config(). Although pxa2xx_transceiver_mode() can subsequently set these two signals via its own call to pxa2xx_mfp_config(), pxa2xx_transceiver_mode() is only present when CONFIG_PXA_FICP=y. Hence this patch provides a default mfp config. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
* | ARM: pxa: hx4700: Add PCMCIA/CF supportPaul Parsons2012-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | This patch is part of a set which adds PCMCIA/CF support for the hx4700. This patch modifies asic3_gpio_config[] as follows: 1. Remove ASIC3_GPIOC4_CF_nCD, whose purpose is unknown. 2. Add ASIC3_GPIOD4_CF_nCD, the actual CF card detect GPIO. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
* | ARM: pxa: hx4700: Enable ASIC3 GPIO as a wakeup sourcePaul Parsons2012-05-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the ASIC3 GPIO (12) as a wakeup source: 1. Set the WAKEUP_ON_EDGE_RISE MFP config bits for GPIO12 in hx4700_pin_config[]. 2. Call gpio_set_wake() for GPIO12. With GPIO12 thus enabled, the mfd/asic3 driver can enable its own GPIOs as wakeup sources by implementing a irq_set_wake() handler. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
* | ARM: pxa: hx4700: Initialize DS1WM clock_ratePaul Parsons2012-05-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The asic3 driver now sets the DS1WM clock_rate from the newly added asic3_platform_data clock_rate field. This patch initializes the asic3_platform_data clock_rate field on the hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
* | ARM: pxa: mioa701 add camera output enable gpioRobert Jarzmik2012-04-272-0/+5
| | | | | | | | | | | | | | | | | | The Micron MT9M111 camera chip needs its output enable to be activated in order to work. The bootloader is not required to activate it, so do it in machine code. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
* | ARM: pxa: use ioremap to access CPLDSascha Hauer2012-04-272-99/+52
|/ | | | | | | | | | | | The pcm990 baseboard for the pcm027 module used to setup a static mapping for accessing the CPLD. It became illegal to call iotable_init that late. The pcm027 support is broken since then. This patch switches the cpld support to ioremap and removes all references to previous static mappings. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
* ARM: fix __io macro for PCMCIARob Herring2012-04-052-0/+18
| | | | | | | | | | | | | | | | | | | | | | With commit c334bc1 (ARM: make mach/io.h include optional), PCMCIA was broken. PCMCIA depends on __io() returning a valid i/o address, and most ARM platforms require IO_SPACE_LIMIT be set to 0xffffffff for PCMCIA. This needs a better fix with a fixed i/o address mapping, but for now we just restore things to the previous behavior. This fixes at91, omap1, pxa and sa11xx. pxa needs io.h if PCI is enabled, but PCMCIA is not. sa11xx already has IO_SPACE_LIMIT set to 0xffffffff, so it doesn't need an io.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Joachim Eastwood <joachim.eastwood@jotron.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Tested-by: Paul Parsons <lost.distance@yahoo.com> (pxa270) Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* Merge tag 'fixes-for-linus' of ↵Linus Torvalds2012-03-301-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull a few more ARM platform fixes from Olof Johansson: "Apologies for back-to-back fixes pull requests, but one of the patches below are the kind we'll see posted over and over if we don't send it in. I hadn't done the full sanity-check of defconfig builds by the time I sent up the other fixes yesterday or I would have included it then. Two patches, one dealing with the system.h fallout, the other is a missing linux/bug.h in a place where ARRAY_SIZE() is used." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: clps711x: fix missing include file ARM: fix builds due to missing <asm/system_misc.h> includes
| * ARM: fix builds due to missing <asm/system_misc.h> includesOlof Johansson2012-03-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This does a sweeping change fixing up all the missing system_misc.h and system_info.h includes from the system.h split-up change. These were the ones I came across when building all defconfigs in arch/arm/configs, there might be more but they lack adequate build coverage to be easily caught. I'm expecting to get a lot of these piecemeal by each maintainer, so we might just as well do one sweeping change to get them all at once. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2012-03-295-11/+6
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc fixes from Olof Johansson: "This is a first pass of some of the merge window fallout for ARM platforms. Nothing controversial: - A system.h fallout fix for OMAP - PXA fixes for breakage caused by the regulator struct changes - GPIO fixes for OMAP to properly deal with dynamic IRQ allocation - A mismerge in our arm-soc tree of an lpc32xx change for networking - A fix for USB setup on tegra - An undo of __init annotation of display mux setup on OMAP that's needed at runtime" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: pxa: fix build issue on stargate2 ARM: pxa: fix build issue on cm-x300 ARM: pxa: fix build failure for regulator consumer in em-x270.c ARM: LPC32xx: clock.c: Fix lpc-eth clock reference ARM: OMAP: pm: fix compilation break ARM: OMAP: Remove OMAP_GPIO_IRQ macro definition drivers: input: Fix OMAP_GPIO_IRQ with gpio_to_irq() in ams_delta_serio_exit() ARM: OMAP: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq() ARM: pxa: fix regulator related build fail in magician_defconfig ARM: tegra: Fix device tree AUXDATA for USB/EHCI ARM: OMAP2+: Remove __init from DSI mux functions
| * Merge branch 'fixes' of git://github.com/hzhuang1/linux into fixesOlof Johansson2012-03-295-11/+6
| |\ | | | | | | | | | | | | | | | | | | | | | * 'fixes' of git://github.com/hzhuang1/linux: ARM: pxa: fix build issue on stargate2 ARM: pxa: fix build issue on cm-x300 ARM: pxa: fix build failure for regulator consumer in em-x270.c ARM: pxa: fix regulator related build fail in magician_defconfig
| | * ARM: pxa: fix build issue on stargate2Haojian Zhuang2012-03-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/arm/mach-pxa/stargate2.c:155:3: error: unknown field ‘dev’ specified in initializer arch/arm/mach-pxa/stargate2.c:155:3: warning: initialization from incompatible pointer type [enabled by default] arch/arm/mach-pxa/stargate2.c:155:3: warning: (near initialization for ‘stargate2_sensor_3_con[0].dev_name’) [enabled by default] make[1]: *** [arch/arm/mach-pxa/stargate2.o] Error 1 make: *** [arch/arm/mach-pxa] Error 2 It's caused by 'dev' field removed from struct regulator_consumer_supply. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
| | * ARM: pxa: fix build issue on cm-x300Haojian Zhuang2012-03-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/arm/mach-pxa/cm-x300.c:716:3: error: unknown field ‘dev’ specified in initializer make[1]: *** [arch/arm/mach-pxa/cm-x300.o] Error 1 make: *** [arch/arm/mach-pxa] Error 2 It's caused by 'dev' field removed from struct regulator_consumer_supply. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
| | * ARM: pxa: fix build failure for regulator consumer in em-x270.cPaul Gortmaker2012-03-301-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 737f360d5bef5e01c6cfa755dca0b449a154c1e0 "regulator: Remove support for supplies specified by struct device" caused this file to break, since it was still relying on the device field to be present. Map it onto dev_name appropriately Since there are two consumers with the name "reg-userspace-consumer", we have to supply the ID as a suffix in the REGULATOR_CONSUMER calls. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
| | * ARM: pxa: fix regulator related build fail in magician_defconfigPaul Gortmaker2012-03-282-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 737f360d5bef5e01c6cfa755dca0b449a154c1e0 (linux-next) "regulator: Remove support for supplies specified by struct device" deletes the field from the struct, but this platform was still trying to set those fields. Delete the assignments. arch/arm/mach-pxa/magician.c:581: error: unknown field 'dev' specified in initializer arch/arm/mach-pxa/magician.c:581: warning: initialization from incompatible pointer type arch/arm/mach-pxa/magician.c:585: error: unknown field 'dev' specified in initializer arch/arm/mach-pxa/magician.c:585: warning: initialization from incompatible pointer type arch/arm/mach-pxa/hx4700.c:683: error: unknown field 'dev' specified in initializer arch/arm/mach-pxa/hx4700.c:683: warning: initialization from incompatible pointer type arch/arm/mach-pxa/hx4700.c:687: error: unknown field 'dev' specified in initializer arch/arm/mach-pxa/hx4700.c:687: warning: initialization from incompatible pointer type Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
* | | Merge tag 'cleanup2' of ↵Linus Torvalds2012-03-2911-26/+9
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: cleanups of io includes" from Olof Johansson: "Rob Herring has done a sweeping change cleaning up all of the mach/io.h includes, moving some of the oft-repeated macros to a common location and removing a bunch of boiler plate. This is another step closer to a common zImage for multiple platforms." Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes around it, tegra localtimer.o is *still* gone, yadda-yadda). * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: tegra: Include assembler.h in sleep.S to fix build break ARM: pxa: use common IOMEM definition ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol ARM: __io abuse cleanup ARM: create a common IOMEM definition ARM: iop13xx: fix missing declaration of iop13xx_init_early ARM: fix ioremap/iounmap for !CONFIG_MMU ARM: kill off __mem_pci ARM: remove bunch of now unused mach/io.h files ARM: make mach/io.h include optional ARM: clps711x: remove unneeded include of mach/io.h ARM: dove: add explicit include of dove.h to addr-map.c ARM: at91: add explicit include of hardware.h to uncompressor ARM: ep93xx: clean-up mach/io.h ARM: tegra: clean-up mach/io.h ARM: orion5x: clean-up mach/io.h ARM: davinci: remove unneeded mach/io.h include [media] davinci: remove includes of mach/io.h ARM: OMAP: Remove remaining includes for mach/io.h ARM: msm: clean-up mach/io.h ...
| * | | ARM: pxa: use common IOMEM definitionRob Herring2012-03-259-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pxa was missed in the moving of IOMEM to a common definition, so lots of IOMEM redefined warnings were introduced. So remove pxa IOMEM definition and fix all the fallout. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: rtc-linux@googlegroups.com Cc: alsa-devel@alsa-project.org
| * | | ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbolRob Herring2012-03-252-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only users of ARCH_HAS_DMA_SET_COHERENT_MASK are 2 ARM platforms: ixp4xx and pxa cm_x2xx. We've been getting lucky that the define is implicitly included before dma-mapping.h, but the removal of io.h broke things (c334bc1 ARM: make mach/io.h include optional). Since memory.h is the correct place, but no longer exists, convert the define to a kconfig entry. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Eric Miao <eric.y.miao@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com>
| * | | ARM: remove bunch of now unused mach/io.h filesRob Herring2012-03-061-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that many platforms don't need mach/io.h, remove the unused ones. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
* | | | Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2012-03-2937-1/+48
|\ \ \ \ | |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more ARM updates from Russell King. This got a fair number of conflicts with the <asm/system.h> split, but also with some other sparse-irq and header file include cleanups. They all looked pretty trivial, though. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (59 commits) ARM: fix Kconfig warning for HAVE_BPF_JIT ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds ARM: 7349/1: integrator: convert to sparse irqs ARM: 7259/3: net: JIT compiler for packet filters ARM: 7334/1: add jump label support ARM: 7333/2: jump label: detect %c support for ARM ARM: 7338/1: add support for early console output via semihosting ARM: use set_current_blocked() and block_sigmask() ARM: exec: remove redundant set_fs(USER_DS) ARM: 7332/1: extract out code patch function from kprobes ARM: 7331/1: extract out insn generation code from ftrace ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format ARM: 7351/1: ftrace: remove useless memory checks ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path ARM: Versatile Express: add NO_IOPORT ARM: get rid of asm/irq.h in asm/prom.h ARM: 7319/1: Print debug info for SIGBUS in user faults ARM: 7318/1: gic: refactor irq_start assignment ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop ARM: 7315/1: perf: add support for the Cortex-A7 PMU ...
| * | | ARM: 7344/1: pxa: mainstone: add missing include for IRQ_BOARD_STARTRob Herring2012-02-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As part of mach/irqs.h include removal from sparse, mainstone.h was missed. This fixes the compile of the pcmcia driver. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | Merge branch 'sparse_irq' of git://sources.calxeda.com/kernel/linux into ↵Russell King2012-02-0436-1/+46
| |\ \ \ | | | | | | | | | | | | | | | devel-stable
| | * | | ARM: pxa: remove NR_IRQSRob Herring2012-01-2536-1/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove NR_IRQS and add a per machine .nr_irqs setting. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | | | | Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds2012-03-2812-6/+6
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
| * | | | | Disintegrate asm/system.h for ARMDavid Howells2012-03-2812-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disintegrate asm/system.h for ARM. Signed-off-by: David Howells <dhowells@redhat.com> cc: Russell King <linux@arm.linux.org.uk> cc: linux-arm-kernel@lists.infradead.org
* | | | | | Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2012-03-271-0/+1
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM platform updates from Russell King: "This covers platform stuff for platforms I have a direct interest in (iow, I have the hardware). Essentially: - as we no longer support any other Acorn platforms other than RiscPC anymore, we can collect all that code into mach-rpc. - convert Acorn expansion card stuff to use IRQ allocation functions, and get rid of NO_IRQ from there. - cleanups to the ebsa110 platform to move some private stuff out of its header files. - large amount of SA11x0 updates: - conversion of private DMA implementation to DMA engine support (this actually gives us greater flexibility in drivers over the old API.) - re-worked ucb1x00 updates - convert to genirq, remove sa11x0 dependencies, fix various minor issues - move platform specific sa11x0 framebuffer data into platform files in arch/arm instead of keeping this in the driver itself - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA for SIR transmissions as well as FIR - rework sa1111 support for genirq, and irq allocation - fix sa1111 IRQ support so it works again - use sparse IRQ support After this, I have one more pull request remaining from my current set, which I think is going to be the most problematical as it generates 8 conflicts." Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per Russell. * 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits) ARM: 7343/1: sa11x0: convert to sparse IRQ ARM: 7342/2: sa1100: prepare for sparse irq conversion ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h ARM: sa11x0: remove unused DMA controller definitions ARM: sa11x0: remove old SoC private DMA driver USB: sa1111: add hcd .reset method USB: sa1111: add OHCI shutdown methods USB: sa1111: reorganize ohci-sa1111.c USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__) USB: sa1111: sparse and checkpatch cleanups ARM: sa11x0: don't static map sa1111 ARM: sa1111: use dev_err() rather than printk() ARM: sa1111: cleanup sub-device registration and unregistration ARM: sa1111: only setup DMA for DMA capable devices ARM: sa1111: register sa1111 devices with dmabounce in bus notifier ARM: sa1111: move USB interface register definitions to ohci-sa1111.c ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c ARM: sa1111: delete unused physical GPIO register definitions ...
| * | | | | | ARM: sa1111: provide a generic way to prevent devices from registeringRussell King2012-03-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some platforms don't want certain devices to be registered, because, eg, the interface is not wired. Provide a way for platforms to prevent various devices from being registered via a devid bitmask in the platform data. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | | | Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-03-275-17/+79
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull "ARM: driver specific updates" from Arnd Bergmann: "These are all specific to some driver. They are typically the platform side of a change in the drivers directory, such as adding a new driver or extending the interface to the platform. In cases where there is no maintainer for the driver, or the maintainer prefers to have the platform changes in the same branch as the driver changes, the patches to the drivers are included as well. A much smaller set of driver updates that depend on other branches getting merged first will be sent later. The new export of tegra_chip_uid conflicts with other changes in fuse.c. In rtc-sa1100.c, the global removal of IRQF_DISABLED conflicts with the cleanup of the interrupt handling of that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up aforementioned trivial conflicts. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci mmc: sdhci-s3c: add platform data for the second capability ARM: SAMSUNG: support the second capability for samsung-soc ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1 ARM: EXYNOS: Enable MDMA driver regulator: Remove bq24022 regulator driver rtc: sa1100: add OF support pxa: magician/hx4700: Convert to gpio-regulator from bq24022 ARM: OMAP3+: SmartReflex: fix error handling ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API ARM: OMAP3+: SmartReflex: micro-optimization for sanity check ARM: OMAP3+: SmartReflex: misc cleanups ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata() ARM: OMAP3+: hwmod: add SmartReflex IRQs ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register ARM: OMAP3+: SmartReflex: Add a shutdown hook ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP ... Conflicts: arch/arm/mach-tegra/Makefile arch/arm/mach-tegra/fuse.c drivers/rtc/rtc-sa1100.c
| * \ \ \ \ \ \ Merge branch 'next/fixes-non-critical' into next/driversArnd Bergmann2012-03-206-7/+9
| |\ \ \ \ \ \ \ | | | |_|_|_|_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-lpc32xx/clock.c arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c The conflicts with pxa are non-obvious, we have multiple branches adding and removing the same clock settings. According to Haojian Zhuang, removing the sa1100 rtc dummy clock is the correct fix here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | Merge branch 'regulator' of git://github.com/hzhuang1/linux into next/driversOlof Johansson2012-03-087-20/+82
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'regulator' of git://github.com/hzhuang1/linux: (2 commits) regulator: Remove bq24022 regulator driver pxa: magician/hx4700: Convert to gpio-regulator from bq24022 (plus update to v3.3-rc6)
| | * | | | | | | pxa: magician/hx4700: Convert to gpio-regulator from bq24022Heiko Stübner2012-03-062-12/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bq24022 on these machines is a very simple regulator using gpios. One provides the on/off functionality and a second one is used to change the current between 100 and 500 mA. This functionality can also be provided by the more generic gpio-regulator. Therefore convert both machines which makes it possible to remove the bq24022 driver later on. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
| * | | | | | | | Merge branch 'rtc-sa1100' of git://github.com/hzhuang1/linux into next/driversArnd Bergmann2012-02-285-5/+27
| |\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'rtc-sa1100' of git://github.com/hzhuang1/linux: ARM: mmp: enable rtc in pxa910 rtc: sa1100: enable clk support ARM: pxa: add rtc dummy clock ARM: sa1100: clean up clock support rtc: sa1100: declare irq in resource rtc: sa1100: remove verification code of alarm rtc: sa1100: remove periodic code
| | * | | | | | | | ARM: pxa: add rtc dummy clockHaojian Zhuang2012-02-284-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sa1100-rtc driver could be shared among sa1100/pxa/mmp series silicon. Since clk is used in mmp series silicon, add dummy clock support in pxa also. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
| | * | | | | | | | rtc: sa1100: declare irq in resourceHaojian Zhuang2012-02-281-5/+23
| | | |_|/ / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid to hard coded irq in rtc-sa1100 driver since we could share it among arch-sa1100/arch-pxa/arch-mmp. We still keep hard coded register address since the requirement is enabling both rtc-sa1100 and rtc-pxa driver. The register addresses are conflict since they're only two wrappers on the same rtc device. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
* | | | | | | | | Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-03-272-21/+25
|\ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull "ARM: board specific updates" from Arnd Bergmann/Olof Johansson: "These changes are all specific to one board only. We're trying to keep the number of board files low, but generally board level updates are ok on platforms that are working on moving towards DT based probing, which will eventually lead to removing them. The board-ams-delta.c board file gets a conflict between the removal of ams_delta_config and the addition of a lot of other data. The Kconfig file has two changes in the same line, and in exynos, the power domain cleanup conflicts with the addition of the image sensor device. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: Amended a fix for a mismerge to board-omap4panda.c] Signed-off-by: Olof Johansson <olof@lixom.net>" Fixed up some fairly trivial conflicts manually. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (82 commits) i.MX35-PDK: Add Camera support ARM : mx35: 3ds-board: add framebuffer device pxa/hx4700: Remove pcmcia platform_device structure ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35% ARM: pxa/hx4700: Remove unwanted request for GPIO105 ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board ARM: EXYNOS: Register JPEG on nuri ARM: EXYNOS: Register JPEG on universal_c210 ARM: S5PV210: Enable JPEG on SMDKV210 ARM: S5PV210: Add JPEG board definition ARM: EXYNOS: Enable JPEG on Origen ARM: EXYNOS: Enable JPEG on SMDKV310 ARM: EXYNOS: Add __init attribute to universal_camera_init() ARM: EXYNOS: Add __init attribute to nuri_camera_init() ARM: S5PV210: Enable FIMC on SMDKC110 ARM: S5PV210: Enable FIMC on SMDKV210 ARM: S5PV210: Enable MFC on SMDKC110 ARM: S5PV210: Enable MFC on SMDKV210 ARM: EXYNOS: Enable G2D on SMDKV310 ARM: tegra: update defconfig ...
| * \ \ \ \ \ \ \ \ Merge branch 'board-specific' of git://github.com/hzhuang1/linux into ↵Arnd Bergmann2012-03-158-20/+11
| |\ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | next/boards * 'board-specific' of git://github.com/hzhuang1/linux: pxa/hx4700: Remove pcmcia platform_device structure ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35% ARM: pxa/hx4700: Remove unwanted request for GPIO105 (update to 3.3-rc7) Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | | | | | | pxa/hx4700: Remove pcmcia platform_device structurePaul Parsons2012-03-141-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing pcmcia platform_device structure is not used and is not needed by the pending hx4700 PCMCIA/CF support. So let's remove it. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
| | * | | | | | | | | ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35%Paul Parsons2012-03-142-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drive the two Bluetooth UART output GPIOs (GPIO43_BTUART_TXD, GPIO45_BTUART_RTS) LOW during sleep mode instead of HIGH. This reduces sleep mode battery discharge from approximately 46 mA to approximately 30 mA. Signed-off-by: Oliver Winker <oliver@oli1170.net> Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
| | * | | | | | | | | ARM: pxa/hx4700: Remove unwanted request for GPIO105Paul Parsons2012-03-141-1/+0
| | | |_|_|/ / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPIO105 (nIR_ON) is requested twice: first in gpio_request_array(), then in pxa_irda_probe(). Consequently the second request fails with EBUSY: pxa2xx-ir: probe of pxa2xx-ir failed with error -16 This patch removes the first request, allowing pxa_irda_probe() to succeed. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
| * | | | | | | | | Merge branch 'board' of ↵Olof Johansson2012-03-106-8/+28
| |\ \ \ \ \ \ \ \ \ | | | |_|_|/ / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards * 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: add minimal support for Nokia RM-696 ARM: OMAP: enable Bluetooth on the PandaBoard ARM: OMAP: pandora: add support for backlight and poweroff ARM: OMAP4: board-4430sdp: don't initialize value that is never used ARM: OMAP3: cm-t3517: add EMAC support ARM: OMAP: move generic EMAC init to separate file ARM: OMAP3: RX-51: add explicit mux configuration of tsc2005 control gpios ARM: OMAP: Add omap_reserve functionality (includes sync-up to 3.3-rc6)
| * | | | | | | | | Merge branch 'board-specific' of git://github.com/hzhuang1/linux into ↵Arnd Bergmann2012-02-283-6/+23
| |\ \ \ \ \ \ \ \ \ | | |_|_|/ / / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | next/boards * 'board-specific' of git://github.com/hzhuang1/linux: (5 commits) ARM: pxa: add dummy clock for pxa25x and pxa27x ARM: mmp: append irq name of gpio device pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values pxa/hx4700: Add ASIC3 LED support pxa/hx4700: Correct StrataFlash block size discovery (update to v3.3-rc5)
| | * | | | | | | | ARM: pxa: add dummy clock for pxa25x and pxa27xHaojian Zhuang2012-02-282-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gpio-pxa driver is shared among arch-pxa and arch-mmp. Clock is the essential component on pxa3xx/pxa95x and arch-mmp. So we need to define dummy clock in pxa25x/pxa27x instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
| | * | | | | | | | pxa/hx4700: Add ASIC3 LED supportPaul Parsons2012-02-281-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
| | * | | | | | | | pxa/hx4700: Correct StrataFlash block size discoveryPaul Parsons2012-02-281-6/+5
| | | |_|/ / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HP iPAQ hx4700 has 128Mb of flash provided by two Intel StrataFlash devices. The hx4700 platform configuration defines a single 128Mb flash resource, resulting in the MTD physmap-flash driver probing the first device only and presuming the second device is identical: physmap platform flash device: 08000000 at 00000000 physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008816 physmap-flash: Found 2 x16 devices at 0x4000000 in 32-bit bank <snip> erase region 0: offset=0x0,size=0x10000,blocks=4 erase region 1: offset=0x40000,size=0x40000,blocks=255 erase region 2: offset=0x4000000,size=0x10000,blocks=4 erase region 3: offset=0x4040000,size=0x40000,blocks=255 physmap-flash: 2 set(s) of 2 interleaved chips --> 32 partitions of 4096 KiB Unfortunately the two devices are not identical. The first has a device ID of 0x8816, identifying a bottom parameter device. The second has a device ID of 0x8813, identifying a top parameter device. By not probing the second device, physmap-flash does not discover the correct block sizes. This patch splits the configuration into two 64Mb flash resources, forcing physmap-flash to probe both devices and thus discover the correct block sizes: physmap platform flash device: 04000000 at 00000000 physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008816 <snip> erase region 0: offset=0x0,size=0x10000,blocks=4 erase region 1: offset=0x40000,size=0x40000,blocks=255 physmap-flash: 1 set(s) of 2 interleaved chips --> 16 partitions of 4096 KiB physmap platform flash device: 04000000 at 04000000 physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008813 <snip> erase region 0: offset=0x0,size=0x40000,blocks=255 erase region 1: offset=0x3fc0000,size=0x10000,blocks=4 physmap-flash: 1 set(s) of 2 interleaved chips --> 16 partitions of 4096 KiB Concatenating MTD devices: (0): "physmap-flash" (1): "physmap-flash" into device "physmap-flash" Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
* | | | | | | | | Merge branch 'pcmcia' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2012-03-231-1/+0
|\ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull #3 ARM updates from Russell King: "This adds gpio support to soc_common, allowing an amount of code to be deleted from each PCMCIA socket driver for the PXA/SA11x0 SoCs." * 'pcmcia' of git://git.linaro.org/people/rmk/linux-arm: PCMCIA: sa1111: rename sa1111 socket drivers to have sa1111_ prefix. PCMCIA: make lubbock socket driver part of sa1111_cs PCMCIA: add Kconfig control for building sa11xx_base.c PCMCIA: sa1111: jornada720: no need to disable IRQs around sa1111_set_io PCMCIA: sa1111: pass along sa1111_pcmcia_configure_socket() failure code PCMCIA: soc_common: remove explicit wrprot initialization in socket drivers PCMCIA: soc_common: remove soc_pcmcia_*_irqs functions PCMCIA: sa11x0: h3600: convert to use new irq/gpio management PCMCIA: sa11x0: simpad: convert to use new irq/gpio management PCMCIA: sa11x0: shannon: convert to use new irq/gpio management PCMCIA: sa11x0: nanoengine: convert reset handling to use GPIO subsystem PCMCIA: sa11x0: nanoengine: convert to use new irq/gpio management PCMCIA: sa11x0: cerf: convert reset handling to use GPIO subsystem PCMCIA: sa11x0: cerf: convert to use new irq/gpio management PCMCIA: sa11x0: assabet: convert to use new irq/gpio management PCMCIA: sa1111: use new per-socket irq/gpio infrastructure PCMCIA: pxa: convert PXA socket drivers to use new irq/gpio management PCMCIA: soc_common: add GPIO support for card status signals PCMCIA: soc_common: move common initialization into soc_common
| * | | | | | | | | PCMCIA: pxa: convert PXA socket drivers to use new irq/gpio managementRussell King2012-02-041-1/+0
| | |_|_|_|_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert all the PXA platform socket drivers to use the new irq/gpio management provided by soc_common. This relieves these drivers from having to do anything with these GPIOs other than provide the numbers to soc_common. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud