summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/powerdomain.c
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP2+: powerdomain: Wait for powerdomain transition in ↵Santosh Shilimkar2012-04-041-1/+7
| | | | | | | | | | | | | | | | | | | pwrdm_state_switch() Commit b1cbdb00d ("OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup") was assuming that pwrdm_state_switch() does wait for the powerdomain transition which is not the case. The missing wait for the powerdomain transition violates the sequence which the hardware expects, which causes power management failures on some devices. Fix this API by adding the pwrdm_wait_transition(). Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: added some more details in the commit log] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP: change get_context_loss_count ret value to intTomi Valkeinen2011-11-041-4/+10
| | | | | | | | | | | | | | | | | | | | get_context_loss_count functions return context loss count as u32, and zero means an error. However, zero is also returned when context has never been lost and could also be returned when the context loss count has wrapped and goes to zero. Change the functions to return an int, with negative value meaning an error. OMAP HSMMC code uses omap_pm_get_dev_context_loss_count(), but as the hsmmc code handles the returned value as an int, with negative value meaning an error, this patch actually fixes hsmmc code also. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated to fix a warning with recent dmtimer changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP2+: voltage: keep track of powerdomains in each voltagedomainKevin Hilman2011-09-151-0/+2
| | | | | | | | | | | | | When a powerdomain is registered and it has an associated voltage domain, add the powerdomain to the voltagedomain using voltdm_add_pwrdm(). Also add voltagedomain iterator helper functions to iterate over all registered voltagedomains and all powerdomains associated with a voltagedomain. Modeled after a similar relationship between clockdomains and powerdomains. Signed-off-by: Kevin Hilman <khilman@ti.com>
* OMAP2+: powerdomain: add voltage domain lookup during registerKevin Hilman2011-09-151-0/+21
| | | | | | | | | | When a powerdomain is registered, lookup the voltage domain by name and keep a pointer to the containing voltagedomain in the powerdomain structure. Modeled after similar method between powerdomain and clockdomain layers. Signed-off-by: Kevin Hilman <khilman@ti.com>
* OMAP: powerdomain: remove omap_chip bitmasksPaul Walmsley2011-09-141-3/+0
| | | | | | | | | | | | | At Tony's request, remove the omap_chip bitmasks from the powerdomain definitions. Instead, initialize powerdomains based on one or more lists that are applicable to a particular SoC family, variant, and silicon revision. Gražvydas Ignotas <notasas@gmail.com> found and reported a bug in a related patch that also applied to this patch - thanks Gražvydas. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Gražvydas Ignotas <notasas@gmail.com>
* OMAP: powerdomain: split pwrdm_init() into two functionsPaul Walmsley2011-09-141-22/+62
| | | | | | | | | | | | | | | | | | | | | | | In preparation for OMAP_CHIP() removal, split pwrdm_init() into three functions. This allows some of them to be called multiple times: for example, pwrdm_register_pwrdms() can be called once to register powerdomains that are common to a group of SoCs, and once to register powerdomains that are specific to a single SoC. The appropriate order to call these functions - which is enforced by the code - is: 1. pwrdm_register_platform_funcs() 2. pwrdm_register_pwrdms() (can be called multiple times) 3. pwrdm_complete_init() Convert the OMAP2, 3, and 4 powerdomain init code to use these new functions. While here, improve documentation, and increase CodingStyle conformance by shortening some local variable names. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP: powerdomains: Make all powerdomain target states as ON at initRajendra Nayak2011-08-191-9/+16
| | | | | | | | | | | | | | | | Program all powerdomain target state as ON; this is to prevent domains from hitting low power states (if bootloader has target states set to something other than ON) and potentially even losing context while PM is not fully initialized, which can cause the system to crash. The PM late init code can then program the desired target state for all the power domains. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [paul@pwsan.com: dropped comment typo hunk; fixed comment indent and moved to kerneldoc; moved code to pwrdm_init(); changed pwrdm_init() argument name to prevent clash; cleaned up patch description] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* perf: add OMAP support for the new power eventsJean Pihet2011-03-111-3/+23
| | | | | | | | | | | | | | | | | | | | | The patch adds the new power management trace points for the OMAP architecture. The trace points are for: - default idle handler. Since the cpuidle framework is instrumented in the generic way there is no need to add trace points in the OMAP specific cpuidle handler; - SoC clocks changes (enable, disable, set_rate), - power domain states: the desired target state and -if different- the actually hit state. Because of the generic nature of the changes, OMAP3 and OMAP4 are supported. Tested on OMAP3 with suspend/resume, cpuidle, basic DVFS. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* OMAP2+: powerdomain: add pwrdm_can_ever_lose_context()Paul Walmsley2011-03-071-1/+42
| | | | | | | | | | | | | | | | | | | Some drivers wish to know whether the device that they control can ever lose context, for example, when the device's enclosing powerdomain loses power. They can use this information to determine whether it is necessary to save and restore device context, or whether it can be skipped. Implement the powerdomain portion of this by adding the function pwrdm_can_ever_lose_context(). This is not for use directly from driver code, but instead is intended to be called from driver-subarch integration code (i.e., arch/arm/*omap* code). Currently, the result from this function should be passed into the driver code via struct platform_data, but at some point this should be part of some common or OMAP-specific device code. While here, update file copyrights. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP2+: powerdomain: add API to get context loss countKevin Hilman2010-12-211-0/+29
| | | | | | | | | | | | | | | Add new powerdomain API u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm) for checking how many times the powerdomain has lost context. The loss count is the sum of the powerdomain off-mode counter, the logic off counter and the per-bank memory off counter. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> [paul@pwsan.com: removed bogus return value on error; improved kerneldoc; tweaked commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP2+: powerdomain: move header file from plat-omap to mach-omap2Paul Walmsley2010-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
* OMAP2+: clockdomain: move header file from plat-omap to mach-omap2Paul Walmsley2010-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | The OMAP clockdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/clockdomain.h to mach-omap2/clockdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access clockdomain code and data directly. DSPBridge also uses the clockdomain headers for some reason, so, modify it also. The DSPBridge code should not be including the clockdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* OMAP4: powerdomains: add PRCM partition data; use OMAP4 PRM functionsPaul Walmsley2010-12-211-1/+9
| | | | | | | | | | | | | | | | | | | OMAP4 powerdomain control registers are split between the PRM hardware module and the PRCM_MPU local PRCM. Add this PRCM partition information to each OMAP4 powerdomain record, and convert the OMAP4 powerdomain function implementations to use the OMAP4 PRM instance functions. Also fixes a potential null pointer dereference of pwrdm->name. The autogeneration scripts have been updated. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
* OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific filesPaul Walmsley2010-12-211-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for adding OMAP4-specific PRCM accessor/mutator functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was OMAP2xxx/3xxx-specific. This process also requires the #includes in each of these files to be changed to reference the new file name. As part of doing so, add some comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use "sideways includes", to indicate that these users of the PRM/CM includes should not be doing so. Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* OMAP4: PRCM: reorganize existing OMAP4 PRCM header filesPaul Walmsley2010-12-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* OMAP: powerdomain: Arch specific funcs for mem controlRajendra Nayak2010-12-211-247/+56
| | | | | | | | | | | | | | | | | | | | | | | | | Define the following architecture specific funtions for omap2/3/4 .pwrdm_set_mem_onst .pwrdm_set_mem_retst .pwrdm_read_mem_pwrst .pwrdm_read_prev_mem_pwrst .pwrdm_read_mem_retst .pwrdm_clear_all_prev_pwrst .pwrdm_enable_hdwr_sar .pwrdm_disable_hdwr_sar .pwrdm_wait_transition .pwrdm_set_lowpwrstchange Convert the platform-independent framework to call these functions. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: rearranged Makefile changes] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* OMAP: powerdomain: Arch specific funcs for logic controlRajendra Nayak2010-12-211-29/+22
| | | | | | | | | | | | | | | | | | | Define the following architecture specific funtions for omap2/3/4 .pwrdm_set_logic_retst .pwrdm_read_logic_pwrst .pwrdm_read_prev_logic_pwrst .pwrdm_read_logic_retst Convert the platform-independent framework to call these functions. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
* OMAP: powerdomain: Arch specific funcs for state controlRajendra Nayak2010-12-211-10/+23
| | | | | | | | | | | | | | | | | | | | | Define the following architecture specific funtions for omap2/3/4 .pwrdm_set_next_pwrst .pwrdm_read_next_pwrst .pwrdm_read_pwrst .pwrdm_read_prev_pwrst Convert the platform-independent framework to call these functions. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: remove remaining static allocations in powerdomains.h file; remove path in file header comments, rearranged Makefile changes] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
* OMAP: powerdomain: Infrastructure to put arch specific codeRajendra Nayak2010-12-211-2/+9
| | | | | | | | | | | | | | | | | | Put infrastructure in place, so arch specific func pointers can be hooked up to the platform-independent part of the framework. This is in preparation of splitting the powerdomain framework into platform-independent part (for all omaps) and platform-specific parts. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
* OMAP2: powerdomain: Add break in switch statementThomas Weber2010-08-031-0/+1
| | | | | | | | | Add a missing break at end of switch statement. At the moment it is a fall through to WARN_ON(1) and return -EEXIST. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP powerdomain, hwmod, omap_device: add some creditsPaul Walmsley2010-05-201-1/+1
| | | | | | | | | | | Add some missing credits for people who have contributed significant features or fixes. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Thara Gopinath <thara@ti.com>
* OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomainsRajendra Nayak2010-05-201-0/+28
| | | | | | | | | | Some powerdomains in OMAP4 support a direct transition from one sleep state to another deeper sleep state without having to wakeup the powerdomain. This patch adds an api in the powerdomain framework to set the LOWPOWERSTATECHANGE bit in PWRSTCTRL register. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP2+ PRCM: convert remaining PRCM macros to the _SHIFT/_MASK suffixesPaul Walmsley2010-05-201-1/+1
| | | | | | | | | | | Fix all of the remaining PRCM register shift/bitmask macros that did not use the _SHIFT/_MASK suffixes to use them. This makes the use of these macros consistent. It is intended to reduce error, as code can be inspected visually by reviewers to ensure that bitshifts and bitmasks are used in the appropriate places. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixesPaul Walmsley2010-05-201-11/+13
| | | | | | | | | | | Fix all of the remaining OMAP3 PRCM register shift/bitmask macros that did not use the _SHIFT/_MASK suffixes to use them. This makes the use of these macros consistent. It is intended to reduce error, as code can be inspected visually by reviewers to ensure that bitshifts and bitmasks are used in the appropriate places. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP4: prcm: Use logical OR instead of bitwise ORRajendra Nayak2010-03-311-1/+1
| | | | | | | | | | This patch fixes usage of bitwise OR in if conditions, and instead uses logical OR. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Abhijit Pagare <abhijitpagare@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 PM: Adding counters for power domain logic off and mem off during ↵Thara Gopinath2010-02-241-0/+25
| | | | | | | | | | | | | | | | | | | | | | retention. This patch adds counters to keep track of whether the powerdomain logic or software controllable memory banks are turned off when the power domain enters retention. During power domain retention if logic gets turned off, the scenario is known as Open Switch Retention. Also during retention s/w controllable memory banks of a power domain can be chosen to be kept in retention or off. This patch adds one counter per powerdomain to track the power domain logic state during retention. Number of memory bank state counters added depends on the number of software controllable memory banks of the powerdomain. To view these counters do cat ../debug/pm_debug/count Signed-off-by: Thara Gopinath <thara@ti.com> [paul@pwsan.com: conditional expressions simplified; counter increment code moved to its own function] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP2/3 PM: Adding powerdomain APIs for reading the next logic and mem stateThara Gopinath2010-02-241-0/+73
| | | | | | | | | | | This patch adds APIs pwrdm_read_logic_retst and pwrdm_read_mem_retst for reading the next programmed logic and memory state a powerdomain is to hit in event of the next power domain state being retention. These are needed for OSWR support. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP clockdomain/powerdomain: improve documentationPaul Walmsley2010-01-261-72/+77
| | | | | | | | | | | This patch only affects documentation; no functional changes are included. Clean up comments in the current clockdomain, powerdomain code and header files. This mostly involves conversion to kerneldoc format, although some clarifications are also included. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP powerdomain: remove pwrdm_clk_state_switchPaul Walmsley2010-01-261-6/+0
| | | | | | | | | Nothing calls pwrdm_clk_state_switch(), and the function that seems to be its ideal use case calls pwrdm_clkdm_state_switch(clk->clkdm), so remove it. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP powerdomain/PM: use symbolic constants for the max number of power statesPaul Walmsley2010-01-261-1/+1
| | | | | | | Replace some bare constants with symbolic constants. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP clockdomain/powerdomain: remove runtime register/unregisterPaul Walmsley2010-01-261-133/+45
| | | | | | | | | | | | | | OMAP clockdomains and powerdomains are currently defined statically, only registered at boot, and never unregistered, so we can remove the unregister function and the locking. A variant of this was originally suggested a while ago by Dmitry Baryshkov <dbaryshkov@gmail.com>. This version of this patch contains an additional fix from Kevin Hilman <khilman@deeprootsystems.com> to address one of the pwrdm_for_each_nolock() users in mach-omap2/pm-debug.c. Thanks Kevin. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP2/3 clkdm/pwrdm: move wkdep/sleepdep handling from pwrdm to clkdmPaul Walmsley2010-01-261-257/+2
| | | | | | | | | | | | | | | Move clockdomain wakeup dependency and sleep dependency data structures from the powerdomain layer to the clockdomain layer, where they belong. These dependencies were originally placed in the powerdomain layer due to unclear documentation; however, it is clear now that these dependencies are between clockdomains. For OMAP2/3, this is not such a big problem, but for OMAP4 this needs to be fixed. Thanks to Benoît Cousson <b-cousson@ti.com> for his advice on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
* ARM: OMAP4: PM: Refine the APIs to support OMAP4 features.Abhijit Pagare2010-01-261-27/+85
| | | | | | | | | | The proper Macros have to be used for platform specific calls and some of the compiling requirements and init calls are taken care of. Signed-off-by: Abhijit Pagare <abhijitpagare@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com>
* ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up.Abhijit Pagare2010-01-261-11/+11
| | | | | | | | | | Module offsets were same for OMAP2 and OMAP3 while they differ for OMAP4. Hence we need different macros for identifying platform specific offsets. Signed-off-by: Abhijit Pagare <abhijitpagare@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com>
* OMAP3: PM: Fix for MPU power domain MEM BANK positionThara Gopinath2009-12-111-0/+6
| | | | | | | | | | MPU power domain bank 0 bits are displayed in position of bank 1 in PWRSTS and PREPWRSTS registers. So read them from correct position Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP2/3 powerdomain: return errors rather than returning the output of IS_ERR()Roel Kluin2009-12-111-6/+6
| | | | | | | | IS_ERR returns only 1 or 0, and the functions return a negative error in other cases anyways. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP powerdomain/PM: use symbolic constants for the max number of power statesPaul Walmsley2009-12-111-1/+1
| | | | | | | Replace some bare constants with power states. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP clockdomain/powerdomain: optimize out sleepdep code on OMAP24xxPaul Walmsley2009-12-111-6/+6
| | | | | | | | OMAP24xx chips don't support software-configurable sleep dependencies. Test early for this so the compiler can redact the entire function body on OMAP24xx. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP clockdomain/powerdomain: remove CONFIG_OMAP_DEBUG_{CLOCK,POWER}DOMAINPaul Walmsley2009-12-111-3/+1
| | | | | | | | | | | | | | Avoid cluttering the Kconfig space with debug options that are rarely used. These can now be enabled and disabled by patching the "#undef DEBUG" in the source files with "#define DEBUG", conforming to the practice for the rest of the linux-omap code. Also, while we're here, some lines in plat-omap/Kconfig use sets of leading spaces when those lines should start with tabs. Convert most of them to use tabs. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
* omap: headers: Move remaining headers from include/mach to include/platTony Lindgren2009-10-201-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3: PM: introduce a new powerdomain walk helperArtem Bityutskiy2009-10-051-12/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'pwrdm_for_each()' function walks powerdomains with a spinlock locked, so the the callbacks cannot do anything which may sleep. This patch introduces a 'pwrdm_for_each_nolock()' helper which does the same, but without the spinlock locked. This fixes the following lockdep warning: [ 0.000000] WARNING: at kernel/lockdep.c:2460 lockdep_trace_alloc+0xac/0xec() [ 0.000000] Modules linked in: (unwind_backtrace+0x0/0xdc) from [<c0045464>] (warn_slowpath_common+0x48/0x60) (warn_slowpath_common+0x48/0x60) from [<c0067dd4>] (lockdep_trace_alloc+0xac/0xec) (lockdep_trace_alloc+0xac/0xec) from [<c009da14>] (kmem_cache_alloc+0x1c/0xd0) (kmem_cache_alloc+0x1c/0xd0) from [<c00b21d8>] (d_alloc+0x1c/0x1a4) (d_alloc+0x1c/0x1a4) from [<c00a887c>] (__lookup_hash+0xd8/0x118) (__lookup_hash+0xd8/0x118) from [<c00a9f20>] (lookup_one_len+0x84/0x94) (lookup_one_len+0x84/0x94) from [<c010d12c>] (debugfs_create_file+0x8c/0x20c) (debugfs_create_file+0x8c/0x20c) from [<c010d320>] (debugfs_create_dir+0x1c/0x20) (debugfs_create_dir+0x1c/0x20) from [<c000e8cc>] (pwrdms_setup+0x60/0x90) (pwrdms_setup+0x60/0x90) from [<c002e010>] (pwrdm_for_each+0x30/0x80) (pwrdm_for_each+0x30/0x80) from [<c000e79c>] (pm_dbg_init+0x7c/0x14c) (pm_dbg_init+0x7c/0x14c) from [<c00232b4>] (do_one_initcall+0x5c/0x1b8) (do_one_initcall+0x5c/0x1b8) from [<c00083f8>] (kernel_init+0x90/0x10c) (kernel_init+0x90/0x10c) from [<c00242c4>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Merge branch '2_6_32_for_next' of git://git.pwsan.com/linux-2.6 into for-nextTony Lindgren2009-09-031-2/+2
|\
| * OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.Paul Walmsley2009-09-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the end of the list pd is a pointer to a NULL struct, so checking if the address == NULL doesn't help here. In fact the original code will just keep running past the struct to read who knows what in memory. This case manifests itself when from clkdms_setup() when enabling auto idle for a clock domain and the clockdomain usecount is greater than 0. When _clkdm_add_autodeps() tries to add the a dependency that does not exist in the powerdomain->wkdep_srcs array the for loop will run past the wkdep_srcs array. Currently in linux-omap you won't hit this because the not found case is never executed, unless you start modifying powerdomains and their wakeup/sleep deps. Signed-off-by: Mike Chan <mike@android.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | OMAP: PM debug: make powerdomains use PM-debug countersPeter 'p2' De Schrijver2009-09-021-6/+11
| | | | | | | | | | | | | | | | Make the powerdomain code call the new hook for updating the time. Also implement the updated pwrdm_for_each. Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* | OMAP: PM counter infrastructure.Peter 'p2' De Schrijver2009-09-021-2/+99
|/ | | | | | | | | | | This patch provides the infrastructure to count how many times a powerdomain entered a given power state (on, inactive, retention, off). A number of functions are provided which will be called by the chip specific powerdomain and clockdomain code whenever a transition might have happened. Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisonsRoel Kluin2009-06-191-1/+1
| | | | | | | | with while (i++ < MAX_CLOCK_ENABLE_WAIT); i can reach MAX_CLOCK_ENABLE_WAIT + 1 after the loop, so if (i == MAX_CLOCK_ENABLE_WAIT) that's still success. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* [ARM] OMAP3 pwrdm: add hardware save-and-restore (SAR) supportPaul Walmsley2008-08-211-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP3430ES2+ introduces a new feature: optional powerdomain context hardware save-and-restore (SAR). Currently, this feature only applies to USBHOST and USBTLL module context when the USBHOST or CORE powerdomains enter a low-power sleep state[1]. This feature avoids re-enumeration of USB devices when the powerdomains return from idle, which is potentially time-consuming. This patch adds support for enabling and disabling hardware save-and-restore to the powerdomain code. Three new functions are added, pwrdm_enable_hdwr_sar(), pwrdm_disable_hdwr_sar(), and pwrdm_can_hdwr_sar(). A new struct powerdomain "flags" field is added, with a PWRDM_HAS_HDWR_SAR flag to indicate powerdomains with SAR support. Thanks to Jouni Högander <jouni.hogander@nokia.com> for reviewing an earlier version of these patches, and Richard Woodruff <r-woodruff2@ti.com> for clarifying the purpose of these bits. 1. For the USBHOST controller module, context loss occurs when the USBHOST powerdomain enters off-idle. For USBTLL, context loss occurs either if CORE enters off-idle, or if the CORE logic is configured to turn off when CORE enters retention-idle (OSWR). 34xx ES2 TRM 4.8.6.1.1, 4.8.6.1.2 Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: OMAP2: Clockdomain: Connect clockdomain code to powerdomain codePaul Walmsley2008-08-191-0/+136
| | | | | | | | | | | | | | | Thie patch adds code to the powerdomain layer to track the clockdomains associated with each powerdomain. It also modifies the clockdomain code to register clockdomains with their corresponding powerdomain when the clockdomain is registered. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain codePaul Walmsley2008-08-191-0/+909
This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
OpenPOWER on IntegriCloud