summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/common.h
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP2+: add missing lateinit hook for calling pm late initNishanth Menon2013-10-221-0/+4
| | | | | | | | | | | | | | | | | | AM335x, AM43xx, OMAP5 and DRA7 have missing late init hook. Introduce SoC specific hook with a call to OMAP2+ generic lateinit hook. This allows the generic late initializations such as cpufreq hooks to be active. Based on out-of-tree patches that need to be introduced in mainline, this introduction allows us to provide the foundation for further SoC specific features as they are developed. Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Add support for auxdataTony Lindgren2013-10-101-1/+2
| | | | | | | | | | | For few things we're still going to be needing platform data for device tree based drivers. Let's set up auxdata handling and do it in pdata-quirks.c so we have all the legacy calls in one place. Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Add quirk support for legacy platform data initTony Lindgren2013-09-251-0/+2
| | | | | | | | | | | | We want to drop the board-*.c files but keep things working. Let's make it a bit easier to support legacy platform data init with quirks. This also keeps board-generic.c clean from board specific hacks. For now, the quirks table is empty, that is populated in the later patches. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: DRA7: Reuse io tables and add a new .init_earlyR Sricharan2013-08-131-0/+1
| | | | | | | | The IO descriptor tables for DRA7 are a complete reuse from OMAP5. A new dra7xx_init_early() does the base address inits. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
* reboot: arm: change reboot_mode to use enum reboot_modeRobin Holt2013-07-091-8/+9
| | | | | | | | | | | | | | | | Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'omap-for-v3.11/soc-signed' of ↵Olof Johansson2013-06-141-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc From Tony Lindgren: Omap SoC changes. Mostly improves am33xx support, and adds minimal support for am43x SoCs. * tag 'omap-for-v3.11/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: AM43x: SRAM base and size ARM: OMAP2+: AM43x: GP or HS ? ARM: OMAP2+: AM43x: early init ARM: OMAP2+: AM43x: static mapping ARM: OMAP2+: AM437x: SoC revision detection ARM: OMAP2+: AM43x: soc_is support ARM: OMAP2+: AM43x: kbuild ARM: OMAP2+: AM43x: Kconfig ARM: OMAP2+: separate out OMAP4 restart ARM: AM33XX: clk: Add clock node for EHRPWM TBCLK ARM: OMAP3: clock data: get rid of unused USB host clock aliases and dummies ARM: OMAP2+: AM33xx: Add missing reset status info to GFX hwmod + Linux 3.10-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: OMAP2+: AM43x: early initAfzal Mohammed2013-06-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Minimal early init - PRCM initialization not yet taken care. Control module is similar (base address, feature register etc.) as that of AM335x, while PRCM base address is different. Instead of adding a new header file for AM43x, PRCM base address is added in AM335x header file as it is similar to it to a large extent. Signed-off-by: Afzal Mohammed <afzal@ti.com> [tony@atomide.com: updated to drop am33xx_check_features()] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'omap-pm-v3.10/cleanup/pm' of ↵Tony Lindgren2013-05-161-2/+2
|\ \ | |/ |/| | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-v3.11/pm OMAP PM cleanups for v3.10
| * ARM: OMAP4+: Make secondary_startup function name more consistentSantosh Shilimkar2013-04-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Current code has rather inconsistent function names for 'secondary_startup' routines. Update it to make it more consistent. Suggested by Kevin Hilman as part of OMAP5 PM patch review. Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
* | Merge tag 'drivers-for-linus' of ↵Linus Torvalds2013-05-041-2/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
| * \ Merge branch 'omap-timer-for-v3.10' of git://github.com/jonhunter/linux into ↵Tony Lindgren2013-04-031-2/+1
| |\ \ | | |/ | |/| | | | | | | | | | | | | omap-for-v3.10/timer Conflicts: arch/arm/mach-omap2/timer.c
| | * ARM: OMAP2+: Simplify system timers definitionsJon Hunter2013-04-011-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a lot of redundancy in the definitions for the various system timers for OMAP2+ devices. For example, the omap3_am33xx_gptimer_timer_init() function is the same as the omap3_gp_gptimer_timer_init() function and the function omap4_sync32k_timer_init() can be re-used for OMAP5 devices. Therefore, consolidate the definitions to simplify the code. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | | Merge tag 'soc-for-linus' of ↵Linus Torvalds2013-05-021-0/+8
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "This branch contains part 1 of the platform updates for 3.10. Among the highlights: - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3) - New support for CSR SiRFatlas6 SoCs - A handful of updates for NVidia T114 (a.k.a. Tegra 4) - A bunch of updates for the shmobile platforms - A handful of updates for davinci - A few updates for Qualcomm MSM - Plus a handful of other patches, defconfig updates, etc." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits) ARM: tegra: pm: fix build error w/o PM_SLEEP ARM: davinci: ensure global variables are declared ARM: davinci: sram.c: fix incorrect type in assignment ARM: davinci: da8xx dt: make file local symbols static ARM: davinci: da8xx: add remoteproc support ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries ARM: socfpga: Add clock entries into device tree ARM: socfpga: Enable soft reset ARM: EXYNOS: replace cpumask by the corresponding macro ARM: EXYNOS: handle properly the return values ARM: EXYNOS: factor out the idle states ARM: OMAP4: Enable fix for Cortex-A9 erratas ARM: OMAP2+: Export SoC information to userspace ARM: OMAP2+: SoC name and revision unification ARM: OMAP2+: Move common part of late init into common function ARM: tegra: pm: remove duplicated include from pm.c ARM: davinci: da850: override mmc DT node device name ARM: davinci: da850: add mmc DT entries mmc: davinci_mmc: add DT support ARM: SAMSUNG: check processor type before cache restoration in resume ...
| * | | ARM: OMAP2+: Export SoC information to userspaceRuslan Bilovol2013-04-081-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some situations it is useful for userspace to know some SoC-specific information. For example, this may be used for deciding what kernel module to use or how to better configure some settings etc. This patch exports OMAP SoC information to userspace using existing in Linux kernel SoC infrastructure. This information can be read under /sys/devices/socX directory Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com> [tony@atomide.com: updated for multiplatform changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | | ARM: OMAP4+: CPUidle: Deprecate use of omap4_mpuss_read_prev_context_state()Santosh Shilimkar2013-04-091-5/+0
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current OMAP4 CPUIdle driver is using omap4_mpuss_read_prev_context_state() to check whether the MPU cluster lost context or not before calling cpu_cluster_pm_exit(). This was initially done an optimization for corner cases, where if the cluster low power entry fails for some reason, the cluster context restore gets skipped. However, since reading the previous context is expensive (involving slow accesses to the PRCM), it's better to avoid it and simply check the target cluster state instead. Moving forward, OMAP CPUidle drivers needs to be moved to drivers/idle/* once the PRM/CM code gets moved to drivers. This patch also reduces one dependency with platform code for idle driver movement. Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [khilman@linaro.org: minor changelog edits] Signed-off-by: Kevin Hilman <khilman@linaro.org>
* | | ARM: OMAP: clocks: Delay clk inits atleast until slab is initializedRajendra Nayak2013-03-261-0/+3
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk inits on OMAP happen quite early, even before slab is available. The dependency comes from the fact that the timer init code starts to use clocks and hwmod and we need clocks to be initialized by then. There are various problems doing clk inits this early, one is, not being able to do dynamic clk registrations and hence the dependency on clk-private.h. The other is, inability to debug early kernel crashes without enabling DEBUG_LL and earlyprintk. Doing early clk init also exposed another instance of a kernel panic due to a BUG() when CONFIG_DEBUG_SLAB is enabled. [ 0.000000] Kernel BUG at c01174f8 [verbose debug info unavailable] [ 0.000000] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.9.0-rc1-12179-g72d48f9 #6) [ 0.000000] PC is at __kmalloc+0x1d4/0x248 [ 0.000000] LR is at __clk_init+0x2e0/0x364 [ 0.000000] pc : [<c01174f8>] lr : [<c0441f54>] psr: 600001d3 [ 0.000000] sp : c076ff28 ip : c065cefc fp : c0441f54 [ 0.000000] r10: 0000001c r9 : 000080d0 r8 : c076ffd4 [ 0.000000] r7 : c074b578 r6 : c0794d88 r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : c07cac70 r1 : 000080d0 r0 : 0000001c [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7d Table: 8000404a DAC: 00000017 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc076e240) [ 0.000000] Stack: (0xc076ff28 to 0xc0770000) [ 0.000000] ff20: 22222222 c0794ec8 c06546e8 00000000 00000040 c0794d88 [ 0.000000] ff40: c074b578 c076ffd4 c07951c8 c076e000 00000000 c0441f54 c074b578 c076ffd4 [ 0.000000] ff60: c0793828 00000040 c0794d88 c074b578 c076ffd4 c0776900 c076e000 c07272ac [ 0.000000] ff80: 2f800000 c074c968 c07f93d0 c0719780 c076ffa0 c076ff98 00000000 00000000 [ 0.000000] ffa0: 00000000 00000000 00000000 00000001 c074cd6c c077b1ec 8000406a c0715724 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c074c968 10c53c7d c0776974 [ 0.000000] ffe0: c074cd6c c077b1ec 8000406a 411fc092 00000000 80008074 00000000 00000000 [ 0.000000] [<c01174f8>] (__kmalloc+0x1d4/0x248) from [<c0441f54>] (__clk_init+0x2e0/0x364) [ 0.000000] [<c0441f54>] (__clk_init+0x2e0/0x364) from [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) [ 0.000000] [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) from [<c0719780>] (setup_arch+0x15c/0x284) [ 0.000000] [<c0719780>] (setup_arch+0x15c/0x284) from [<c0715724>] (start_kernel+0x7c/0x334) [ 0.000000] [<c0715724>] (start_kernel+0x7c/0x334) from [<80008074>] (0x80008074) [ 0.000000] Code: e5883004 e1a00006 e28dd00c e8bd8ff0 (e7f001f2) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! It was a know issue, that slab allocations would fail when common clock core tries to cache parent pointers for mux clocks on OMAP, and hence a patch 'clk: Allow late cache allocation for clk->parents, commit 7975059d' was added to work this problem around. A BUG() within kmalloc() with CONFIG_DEBUG_SLAB enabled was completely overlooked causing this regression. More details on the issue reported can be found here, http://www.mail-archive.com/linux-omap@vger.kernel.org/msg85932.html With all these issues around clk inits happening way too early, it makes sense to at least move them to a point where dynamic memory allocations are possible. So move them to a point just before the timer code starts using clocks and hwmod. This should at least pave way for clk inits on OMAP moving to dynamic clock registrations instead of using the static macros defined in clk-private.h. The issue with kernel panic while CONFIG_DEBUG_SLAB is enabled was reported by Piotr Haber and Tony Lindgren and this patch fixes the reported issue as well. Reported-by: Piotr Haber <phaber@broadcom.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org # v3.8 Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: Remove duplicate omap4430_init_late() declarationSantosh Shilimkar2013-03-041-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Commit bbd707ac {ARM: omap2: use machine specific hook for late init} accidentally added two declarations for omap4430_init_late(). Remove the duplicate declaration. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'late-omap' of ↵Linus Torvalds2013-02-281-0/+8
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late OMAP changes from Olof Johansson: "This branch contains changes for OMAP that came in late during the release staging, close to when the merge window opened. It contains, among other things: - OMAP PM fixes and some patches for audio device integration - OMAP clock fixes related to common clock conversion - A set of patches cleaning up WFI entry and blocking. - A set of fixes and IP block support for PM on TI AM33xx SoCs (Beaglebone, etc) - A set of smaller fixes and cleanups around AM33xx restart and revision detection, as well as removal of some dead code (CONFIG_32K_TIMER_HZ)" * tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: omap2: include linux/errno.h in hwmod_reset ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default ARM: OMAP4: hwmod data: Enable AESS hwmod device ARM: OMAP4: hwmod data: Update AESS data with memory bank area ARM: OMAP4+: AESS: enable internal auto-gating during initial setup ASoC: TI AESS: add autogating-enable function, callable from architecture code ARM: OMAP2+: hwmod: add enable_preprogram hook ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init() ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3 ARM: OMAP2+: AM33XX: Update the hardreset API ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files ...
| * ARM: OMAP2+: AM33xx: Add SoC specific restart hookJean-Sebastien A. Beaudry2013-02-011-0/+8
| | | | | | | | | | | | | | | | | | Add restart hook so that DTS based AM33xx builds can restart the platform. Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jean-Sebastien A. Beaudry <jsabeaudry@handyem.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: delete struct sys_timerStephen Warren2012-12-241-7/+7
|/ | | | | | | | | | | | | | | | | | Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-12-121-99/+35
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
| * Merge tag 'omap-for-v3.8/cleanup-timer-signed' of ↵Olof Johansson2012-11-291-0/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup Timer clean-up to get us closer to moving timer code to drivers, and to get rid of CONFIG_OMAP_32K_TIMER and rely on the board or devicetree provided timer configuration. Note that these changes are on top of the recent timer fixes. By Jon Hunter (32) and others via Tony Lindgren * tag 'omap-for-v3.8/cleanup-timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (71 commits) ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: OMAP2+: Fix compiler warning for 32k timer ARM: OMAP: Remove unnecessary inclusion of dmtimer.h ARM: OMAP: Add platform data header for DMTIMERs ARM: OMAP: Remove unnecessary omap_dm_timer structure declaration ARM: OMAP2+: Remove unnecessary local variable in timer code ARM: OMAP: Don't store timers physical address ARM: OMAP: Define omap_dm_timer_prepare function as static ARM: OMAP: Clean-up dmtimer reset code ARM: OMAP: Remove __omap_dm_timer_set_source function ARM: OMAP: Remove unnecessary call to clk_get() ARM: OMAP: Add dmtimer interrupt disable function ARM: OMAP: Fix spurious interrupts when using timer match feature ARM: OMAP: Don't restore DMTIMER interrupt status register ARM: OMAP: Don't restore of DMTIMER TISTAT register ARM: OMAP: Fix dmtimer reset for timer1 ARM: OMAP2+: Don't use __omap_dm_timer_reset() ARM: OMAP2/3: Define HWMOD software reset status for DMTIMERs ARM: OMAP3: Correct HWMOD DMTIMER SYSC register declarations ... Change/change conflict in arch/arm/mach-omap2/board-cm-t3517.c. Signed-off-by: Olof Johansson <olof@lixom.net>
| | * ARM: OMAP3: cm-t3517: use GPTIMER for system clockIgor Grinberg2012-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | cm-t3517 starting from revision 1.2 does not have the 32K oscilator wired to the AM3517 SoC. Therefore switch to use the GPTIMER for system clock. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | Merge tag 'omap-for-v3.8/cleanup-prcm-part2-signed' of ↵Arnd Bergmann2012-11-151-99/+34
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren <tony@atomide.com>: More PRCM cleanups via Paul Walmsley <paul@pwsan.com>: Second set of OMAP PRCM cleanups for 3.8. These patches remove the use of omap_prcm_get_reset_sources() from the OMAP watchdog driver, and remove mach-omap2/prcm.c and plat-omap/include/plat/prcm.h. Basic test logs for this branch on top of Tony's cleanup-prcm branch at commit 7fc54fd3084457c7f11b9e2e1e3fcd19a3badc33 are here: http://www.pwsan.com/omap/testlogs/prcm_cleanup_b_3.8/20121108151646/ However, cleanup-prcm at 7fc54fd3 does not include some fixes that are needed for a successful test. With several reverts, fixes, and workarounds applied, the following test logs were obtained: http://www.pwsan.com/omap/testlogs/TEST_prcm_cleanup_b_3.8/20121108151930/ which indicate that the series tests cleanly. This second pull request updates one of the patches which broke with rmk's allnoconfigs, and also updates the tag description to indicate that 7fc54fd3 is building cleanly here. * tag 'omap-for-v3.8/cleanup-prcm-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits) ARM: OMAP2: Fix compillation error in cm_common ARM: OMAP2+: PRCM: remove obsolete prcm.[ch] ARM: OMAP2+: hwmod: call to _omap4_disable_module() should use the SoC-specific call ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup ARM: OMAP2+: PRCM: remove omap2_cm_wait_idlest() ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions ARM: OMAP2xxx: APLL/CM: convert to use omap2_cm_wait_module_ready() ARM: OMAP2+: board files: use SoC-specific system restart functions ARM: OMAP2+: PRCM: create SoC-specific chip restart functions ARM: OMAP2xxx: clock: move virt_prcm_set code into clkt2xxx_virt_prcm_set.c ARM: OMAP2xxx: clock: remove global 'dclk' variable ARM: OMAP2/3: PRM: add SoC reset functions (using the CORE DPLL method) ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code ARM: OMAP2+: PRCM: remove omap_prcm_get_reset_sources() watchdog: OMAP: use standard GETBOOTSTATUS interface; use platform_data fn ptr ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer ARM: OMAP1: CGRM: fix omap1_get_reset_sources() return type ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver ARM: OMAP1: create read_reset_sources() function (for initial use by watchdog) ... Conflicts: arch/arm/mach-omap2/cm33xx.c arch/arm/mach-omap2/io.c arch/arm/mach-omap2/prm_common.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * ARM: OMAP2+: board files: use SoC-specific system restart functionsPaul Walmsley2012-11-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the board files to use the SoC-specific system restart functions. At this point it's possible to remove omap_prcm_restart() from mach-omap2/prcm.c. While removing the prototypes for the now-unused restart functions, clean up a few more obsolete prototypes in mach-omap2/clock.h. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
| | * ARM: OMAP2+: PRCM: create SoC-specific chip restart functionsPaul Walmsley2012-11-081-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split omap_prcm_restart() from mach-omap2/prcm.c into SoC-specific variants. These functions need to be able to save the reboot reason into the scratchpad RAM. This implies a dependency on both the PRM and SCM IP blocks, so they've been moved into their own file. This will eventually call functions in the PRM and SCM drivers, once those are created. Vaibhav Hiremath <hvaibhav@ti.com> identified an unused prototype in the first version of this patch - now removed. Tony Lindgren <tony@atomide.com> noted a compile problem with some RMK Kconfigs; resolved in this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Tony Lindgren <tony@atomide.com>
| | * ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io codePaul Walmsley2012-11-081-100/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Get rid of the mach-omap2/common.c globals by moving the global initialization for IP block addresses that must occur early into mach-omap2/io.c. In the process, remove the *_map_common_io*() and SoC-specific *set_globals* functions. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
* | | Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-12-121-3/+10
|\ \ \ | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
| * | ARM: OMAP: Remove plat-omap/common.hTony Lindgren2012-10-311-2/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the prototypes in plat-omap/common.h are not common to omap1 and omap2+, they are local to omap2+ and should not be in plat-omap/common.h. The only shared function prototype in this file is omap_init_clocksource_32k(), let's put that into counter-32k.h. Note that the new plat/counter-32k.h must not be included from drivers, that will break omap2+ build for CONFIG_MULTIPLATFORM. Signed-off-by: Tony Lindgren <tony@atomide.com>
| * Merge branch 'omap-for-v3.8/cleanup-headers-usb' into ↵Tony Lindgren2012-10-241-0/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap-for-v3.8/cleanup-headers Conflicts: arch/arm/mach-omap1/clock.c arch/arm/mach-omap2/board-2430sdp.c arch/arm/mach-omap2/board-4430sdp.c arch/arm/mach-omap2/board-cm-t35.c arch/arm/mach-omap2/board-igep0020.c arch/arm/mach-omap2/board-ldp.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-omap2/board-omap3logic.c arch/arm/mach-omap2/board-omap4panda.c arch/arm/mach-omap2/board-overo.c arch/arm/mach-omap2/board-rm680.c arch/arm/mach-omap2/board-rx51.c arch/arm/mach-omap2/twl-common.c arch/arm/mach-omap2/usb-host.c arch/arm/mach-omap2/usb-musb.c
| | * ARM: OMAP2+: Introduce local usb.hTony Lindgren2012-10-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's move what we can from plat/usb.h to the local usb.h for ARM common zImage support. This is needed so we can remove plat/usb.h for ARM common zImage support. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Partha Basak <parthab@india.ti.com> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: OMAP: Split plat/serial.h for omap1 and omap2+Tony Lindgren2012-10-241-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | For omap1, we'll keep mach/serial.h around for 8250.c hardware workarounds. For omap2+, we no longer need mach/serial.h and can make it local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2Tony Lindgren2012-10-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We want to remove plat/cpu.h. To do this, let's first split it to private soc.h to mach-omap1 and mach-omap2. We have to keep plat/cpu.h around until the remaining drivers are fixed, so let's include the local soc.h in plat/cpu.h and for drivers still including plat/cpu.h. Once the drivers are fixed not to include plat/cpu.h, we can remove the file. This is needed for the ARM common zImage support. [tony@atomide.com: updated to not print a warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: OMAP2+: Move omap_reserve() locally to mach-omap2Lokesh Vutla2012-10-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap_reserve() callback is defned only for mach-omap2. So, moving definition of omap_reserve() to mach-omap2. This helps is moving plat/omap_secure.h local to mach-omap2 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: OMAP: Make plat/common.h local to mach-omap1 and mach-omap2Tony Lindgren2012-10-171-1/+2
| | | | | | | | | | | | | | | | | | We cannot keep this in plat/common.h for common zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2Tony Lindgren2012-10-171-0/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | There's no need to keep the device related things in the common i2c.c as omap2+ is using hwmod. Split the code to mach-omap1 and mach-omap2 parts and only leave common code to plat-omap/i2c.c. Note that as omap1 only has one i2c controller, we can now remove the old device related macros. Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP4: retrigger localtimers after re-enabling gicColin Cross2012-11-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'Workaround for ROM bug because of CA9 r2pX gic control' register change disables the gic distributor while the secondary cpu is being booted. If a localtimer interrupt on the primary cpu occurs when the distributor is turned off, the interrupt is lost, and the localtimer never fires again. Make the primary cpu wait for the secondary cpu to reenable the gic distributor (with interrupts off for safety), and then check if the pending bit is set in the localtimer but not the gic. If so, ack it in the localtimer, and reset the timer with the minimum timeout to trigger a new timer interrupt. Signed-off-by: Colin Cross <ccross@android.com> [s-jan@ti.com: adapted to k3.4 + validated functionality] Signed-off-by: Sebastien Jan <s-jan@ti.com> [t-kristo@ti.com: dropped generic ARM kernel exports from the code, rebased to mainline] Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control ↵Santosh Shilimkar2012-11-051-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | register change. On OMAP4+ devices, GIC register context is lost when MPUSS hits the OSWR(Open Switch Retention). On the CPU wakeup path, ROM code gets executed and one of the steps in it is to restore the saved context of the GIC. The ROM Code GIC distributor restoration is split in two parts: CPU specific register done by each CPU and common register done by only one CPU. Below is the abstract flow. ............................................................... - MPUSS in OSWR state. - CPU0 wakes up on the event(interrupt) and start executing ROM code. [..] - CPU0 executes "GIC Restoration:" [...] - CPU0 swicthes to non-secure mode and jumps to OS resume code. [...] - CPU0 is online in OS - CPU0 enables the GIC distributor. GICD.Enable Non-secure = 1 - CPU0 wakes up CPU1 with clock-domain force wakeup method. - CPU0 continues it's execution. [..] - CPU1 wakes up and start executing ROM code. [..] - CPU1 executes "GIC Restoration:" [..] - CPU1 swicthes to non-secure mode and jumps to OS resume code. [...] - CPU1 is online in OS and start executing. [...] - GIC Restoration: /* Common routine for HS and GP devices */ { if (GICD != 1) { /* This will be true in OSWR state */ if (GIC_SAR_BACKUP_STATE == SAVED) - CPU restores GIC distributor else - reconfigure GIC distributor to boot values. GICD.Enable secure = 1 } if (GIC_SAR_BACKUP_STATE == SAVED) - CPU restore its GIC CPU interface registers if saved. else - reconfigure its GIC CPU interface registers to boot values. } ............................................................... So as mentioned in the flow, GICD != 1 condition decides how the GIC registers are handled in ROM code wakeup path from OSWR. As evident from the flow, ROM code relies on the entire GICD register value and not specific register bits. The assumption was valid till CortexA9 r1pX version since there was only one banked bit to control secure and non-secure GICD. Secure view which ROM code sees: bit 0 == Enable Non-secure Non-secure view which HLOS sees: bit 0 == Enable secure But GICD register has changed between CortexA9 r1pX and r2pX. On r2pX GICD register is composed of 2 bits. Secure view which ROM code sees: bit 1 == Enable Non-secure bit 0 == Enable secure Non-secure view which HLOS sees: bit 0 == Enable Non-secure Hence on OMAP4460(r2pX) devices, if you go through the above flow again during CPU1 wakeup, GICD == 3 and hence ROM code fails to understand the real wakeup power state and reconfigures GIC distributor to boot values. This is nasty since you loose the entire interrupt controller context in a live system. The ROM code fix done on next OMAP4 device (OMAP4470 - r2px) is to check "GICD.Enable secure != 1" for GIC restoration in OSWR wakeup path. Since ROM code can't be fixed on OMAP4460 devices, a work around needs to be implemented. As evident from the flow, as long as CPU1 sees GICD == 1 in it's wakeup path from OSWR, the issue won't happen. Below is the flow with the work-around. ............................................................... - MPUSS in OSWR state. - CPU0 wakes up on the event(interrupt) and start executing ROM code. [..] - CPU0 executes "GIC Restoration:" [..] - CPU0 swicthes to non-secure mode and jumps to OS resume code. [..] - CPU0 is online in OS. - CPU0 does GICD.Enable Non-secure = 0 - CPU0 wakes up CPU1 with clock domain force wakeup method. - CPU0 waits for GICD.Enable Non-secure = 1 - CPU0 coninues it's execution. [..] - CPU1 wakes up and start executing ROM code. [..] - CPU1 executes "GIC Restoration:" [..] - CPU1 swicthes to non-secure mode and jumps to OS resume code. [..] - CPU1 is online in OS - CPU1 does GICD.Enable Non-secure = 1 - CPU1 start executing [...] ............................................................... With this procedure, the GIC configuration done between the CPU0 wakeup and CPU1 wakeup will not be lost but during this short windows, the CPU0 will not receive interrupts. The BUG is applicable to only OMAP4460(r2pX) devices. OMAP4470 (also r2pX) is not affected by this bug because ROM code has been fixed. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* Merge branch 'multiplatform/smp_ops' into next/multiplatformOlof Johansson2012-09-221-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * multiplatform/smp_ops: ARM: consolidate pen_release instead of having per platform definitions ARM: smp: Make SMP operations mandatory ARM: SoC: convert spear13xx to SMP operations ARM: SoC: convert imx6q to SMP operations ARM: SoC: convert highbank to SMP operations ARM: SoC: convert shmobile SMP to SMP operations ARM: SoC: convert ux500 to SMP operations ARM: SoC: convert MSM to SMP operations ARM: SoC: convert Exynos4 to SMP operations ARM: SoC: convert Tegra to SMP operations ARM: SoC: convert OMAP4 to SMP operations ARM: SoC: convert VExpress/RealView to SMP operations ARM: SoC: add per-platform SMP operations Conflicts due to file moves or removals in: arch/arm/mach-msm/board-msm8960.c arch/arm/mach-msm/board-msm8x60.c arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to board file cleanup: arch/arm/mach-tegra/board-paz00.c Conflicts due to cpu hotplug addition: arch/arm/mach-tegra/hotplug.c Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: SoC: convert OMAP4 to SMP operationsMarc Zyngier2012-09-131-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Convert OMAP4 to use struct smp_operations to provide its SMP and CPU hotplug operations. Tested on both Panda and IGEPv2 (MULTI_OMAP kernel) Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren2012-09-121-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQTony Lindgren2012-09-121-1/+2
| | | | | | | | | | | | | | | | Remove hardcoded IRQs in irqs.h and related files as these are no longer needed. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: Prepare for irqs.h removalTony Lindgren2012-09-121-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: omap2+: board-generic: clean up the irq data from board fileR Sricharan2012-07-091-2/+4
| | | | | | | | | | | | | Move the irq_match arrays and the irq init functions of OMAP 2,3 and 4 based boards out of board-generic.c file and also rename the irq init function to match the interrupt controller present in the SOCs. This is a preparatory patch to add the OMAP5 evm board's irq init support with device tree. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: OMAP5: Add SMP supportSantosh Shilimkar2012-07-091-0/+1
| | | | | | | | Add OMAP5 SMP boot support using OMAP4 SMP code. The relevant code paths are runtime checked using cpu id Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: OMAP5: timer: Add clocksource, clockevent supportR Sricharan2012-07-091-0/+1
| | | | | | | | Adding the Initialisaton for clocksource and clockevent device on OMAP5 Socs. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: OMAP5: Add minimal support for OMAP5430 SOCR Sricharan2012-07-091-0/+11
| | | | | | | | | | | | | | | | | | OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and with an integrated L2 cache controller. OMAP5432 is another variant of OMAP5430, with a memory controller supporting DDR3 and SATA. Patch includes: - The machine specific headers and sources updates. - Platform header updates. - Minimum initialisation support for serial. - IO table init Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: OMAP2+: Remove unnecessary ifdef around __omap2_set_globalsVaibhav Hiremath2012-07-051-0/+5
| | | | | | | | | | | | | | The function __omap2_set_globals() can be common across all platforms/architectures, even in case of omap4, internally it calls same set of functions as in __omap2_set_globals() function (except for sdrc). This patch adds new config flag SOC_HAS_OMAP2_SDRC to handle sdrc, so that we can reuse same function across omap2/3/4... Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP AM33xx: voltagedomain: Add voltage domain dataVaibhav Hiremath2012-06-181-0/+1
| | | | | | | | | | | | | | | | | | | Currently dummy voltage domain data is being created in order to succeed boot process, nothing has been done w.r.t actual hardware (voltage control). Also, hook up the AM33XX voltage domain to OMAP framework. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> [paul@pwsan.com: updated for 3.5] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP2+: am33xx: Add AM335XEVM machine supportAfzal Mohammed2012-06-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds minimal support for AM335X machine init. During last merge window, two separate patches supporting am33xx machine init had been submitted, 1. Link to earlier Baseport patch submission (Legacy): http://www.mail-archive.com/linux-omap@vger.kernel.org/msg59325.html 2. Link to earlier DT based machine init support patch submission: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg61398.html And both had got accepted at that time, but got missed during merge window. But now, since we have taken decision to make am33xx as a separate class and not to follow omap3 family, these patches needs to changes accordingly (only changes), - Combine both the patches, since early init and timer init used in board-generic.c file requires them. - Remove dependency on AM3517EVM, and only use DT approach for machine init. - Change the config option (as changed recently) CONFIG_SOC_OMAPAM33XX --> CONFIG_SOC_AM33XX Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
OpenPOWER on IntegriCloud