summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-igep0020.c
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP: igep0020: use new display driversTomi Valkeinen2013-08-281-14/+22
| | | | | | | | | | Use new display drivers for igep0020 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP3: igep0020: Set DSS pins in correct mux mode.Enric Balletbo i Serra2013-07-041-0/+31
| | | | | | | | | | | | | Platform code used to depend on bootloadres for correctly setting the mux pin modes. But bootloaders should only set the minimum required mux pins. So, DSS mux pins are not set in U-Boot anymore and video display is broken on IGEPv2 when booting with newer U-Boot versions. Setup the DSS pin muxes to enable display functionality. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'drivers-for-linus' of ↵Linus Torvalds2013-05-041-14/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
| * ARM: OMAP3: igep0020: Adapt to ehci-omap changesRoger Quadros2013-04-021-14/+18
| | | | | | | | | | | | | | | | Use usbhs_init_phys() to register the PHY's RESET regulators and the NOP PHY devices. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | OMAPDSS: panels: keep platform data of all panels in a single headerArchit Taneja2013-04-031-1/+1
|/ | | | | | | | | | | | | | | | | | | | | Structs for platform data of omapdss panels are found in headers in the 'include/video/' path. Board files populate these structs with platform specific values, and the panel driver uses these to configure the panel. Currently, each panel has it's own header in the above path. Move all the omapdss panel platform data structs to a single header omap-panel-data.h. This is useful because: - All other omapdss panel drivers will be modified to use platform data. This would lead to a lot of panel headers usable only by omapdss. A lot of these platform data structs are trivial, and don't really need a separate header. - Platform data would be eventually removed, and platform information would be passed via device tree. Therefore, omapdss panel platform data structs are temporary, and will be easier to remove if they are all in the same header. - All board files will have to include the same header to configure a panel's platform data, that makes the board files more consistent. Signed-off-by: Archit Taneja <archit@ti.com>
* Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-211-9/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC board specific changes from Arnd Bergmann: "These updates are all for board specific code, including - defconfig updates for shmobile, davinci, bcm2835, imx, omap and tegra - SD/MMC and I2C support on bcm2835 (Raspberry PI) - minor updates for PXA - shmobile updates to GPIO usage in board files - More things in OMAP board files are moved over to device tree probing - Better support for audio devices on some OMAP platforms" * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: imx_v4_v5_defconfig: Add VPU support ARM: imx: configs: enable netfilter support ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc RX-51: Register twl4030-madc device RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers ARM: OMAP1: nokia770: enable CBUS/Retu ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies ARM: OMAP2+: craneboard: support the TPS65910 PMU ARM: OMAP2+: craneboard: support NAND device ARM: OMAP3: cm-t3517: add MMC support ARM: OMAP2+: Remove apollon board support ARM: shmobile: armadillo800eva: set clock rates before timer init ARM: tegra: defconfig updates ARM: shmobile: mackerel: Use gpio_request_one() ARM: shmobile: kzm9g: Use gpio_request_one() ARM: shmobile: bonito: Use gpio_request_one() ...
| * Merge tag 'omap-for-v3.9/twl-signed-v2' of ↵Olof Johansson2013-02-091-1/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards From Tony Lidgren: OMAP TWL updates from Peter Ujfalusi <peter.ujfalusi@ti.com>: Update for audio support via omap-twl4030 and pwm updates in board level, and zoom-peripherals update to not request the TWL GPIO7. * tag 'omap-for-v3.9/twl-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init ARM: board-zoom: Do not request LCD panel enable GPIO from twl4030 ARM: OMAP: omap3beagle: Use the pwm_leds driver to control the PMU_STAT led ARM: OMAP: board-4430sdp: Proper support for TWL6030 PWM LED/Backlight ARM: OMAP: sdp3430: Audio support via the common omap-twl4030 machine driver ARM: OMAP: zoom: Audio support via the common omap-twl4030 machine driver ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup ARM: OMAP2+: twl-common: Add default twl4030 audio configuration ARM: OMAP: zoom: Zoom2 does not have extmute functionality ARM: OMAP: 3430sdp: Enable extmute functionality for audio
| | * ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setupPeter Ujfalusi2013-01-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Boards with special audio routing can pass a custom omap_tw4030_pdata to the audio machine driver. At the same time update the board files using the same audio driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
| * | ARM: OMAP3: igep0020: simplify GPIO LEDs dependenciesJavier Martinez Canillas2013-02-011-8/+8
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IGEPv2 board has two user GPIO LEDs and one of them is default to "on" to tell the user that the board booted correctly. But to use these LEDs the config options CONFIG_LEDS_GPIO, CONFIG_LEDS_TRIGGERS and CONFIG_LEDS_TRIGGER_DEFAULT_ON have to be enabled. Since only the default-on and default-off triggers were used anyway, it is better to just use .default_state instead of .default_trigger and not depend on CONFIG_LEDS_TRIGGER_* Also, this is consistent with IGEPv2 Device Tree that uses default-state instead of linux,default-trigger for the leds device nodes. The LED names also have been updated to use the same names used on omap3-igep0020.dtb. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-211-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
| * \ Merge tag 'omap-for-v3.9/usb-signed' of ↵Arnd Bergmann2013-02-191-2/+2
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc These changes contain the OMAP USB related platform data changes that were dropped from linux next because of the merge conflicts as requested by me and Olof. The reason was that at this point we really should be able to do the arch/arm related changes separately from driver changes to avoid dependencies between branches. These patches were initially part of the USB related MFD patches. Based on our comments, Roger Quadros quickly reworked these patches into a shared branch between ARM SoC tree and the MFD tree, then separate patches for the OMAP platform data and MFD driver. Note that this branch will conflict with c1d1cd597fc7 ("ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code"). Please see http://lkml.org/lkml/2013/2/11/16 for the merge resolution. [arnd - resolved the merge conflict] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)Roger Quadros2013-02-141-2/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's have a single platform data structure for the OMAP's High-Speed USB host subsystem instead of having 3 separate ones i.e. one for board data, one for USB Host (UHH) module and one for USB-TLL module. This makes the code much simpler and avoids creating multiple copies of platform data. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
* | | Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-211-2/+2
|\ \ \ | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
| * | ARM: delete struct sys_timerStephen Warren2012-12-241-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | ARM: OMAP: USB: Add phy binding informationKishon Vijay Abraham I2013-02-061-0/+2
|/ | | | | | | | | | | | This is w.r.t the changes in PHY library to support adding and getting multiple PHYs of the same type. In the new design, the binding information between the PHY and the USB controller should be specified in the platform specific initialization code. So it's been done here for OMAP platforms. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'v3.7-rc7' into next/cleanupOlof Johansson2012-11-251-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Merging in mainline back to next/cleanup since it has collected a few conflicts between fixes going upstream and some of the cleanup patches. Git doesn't auto-resolve some of them, and they're mostly noise so let's take care of it locally. Conflicts are in: arch/arm/mach-omap2/omap_hwmod_44xx_data.c arch/arm/plat-omap/i2c.c drivers/video/omap2/dss/dss.c Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: OMAP3: igep0020: Set WIFI/BT GPIO pins in correct mux modeAnders Hedlund2012-11-071-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setup the WIFI/BT GPIO pin muxes to enable WIFI/BT functionality. This is needed to fix regression caused by recent versions of u-boot that only mux essential pins. Signed-off-by: Anders Hedlund <anders.j.hedlund@gmail.com> Cc: Jonas Zetterberg <jozz@jozz.se> Cc: Enric Balletbo i Serra <eballetbo@gmail.com> Cc: Javier Martinez Canillas <martinez.javier@gmail.com> Cc: Matthias Brugger <mbrugger@iseebcn.com> [tony@atomide.com: updated comments to describe regression] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: board files: use SoC-specific system restart functionsPaul Walmsley2012-11-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Modify the board files to use the SoC-specific system restart functions. At this point it's possible to remove omap_prcm_restart() from mach-omap2/prcm.c. While removing the prototypes for the now-unused restart functions, clean up a few more obsolete prototypes in mach-omap2/clock.h. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
* | Merge branch 'omap-for-v3.8/cleanup-headers-usb' into ↵Tony Lindgren2012-10-241-4/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap-for-v3.8/cleanup-headers Conflicts: arch/arm/mach-omap1/clock.c arch/arm/mach-omap2/board-2430sdp.c arch/arm/mach-omap2/board-4430sdp.c arch/arm/mach-omap2/board-cm-t35.c arch/arm/mach-omap2/board-igep0020.c arch/arm/mach-omap2/board-ldp.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-omap2/board-omap3logic.c arch/arm/mach-omap2/board-omap4panda.c arch/arm/mach-omap2/board-overo.c arch/arm/mach-omap2/board-rm680.c arch/arm/mach-omap2/board-rx51.c arch/arm/mach-omap2/twl-common.c arch/arm/mach-omap2/usb-host.c arch/arm/mach-omap2/usb-musb.c
| * | ARM: OMAP2+: Introduce local usb.hTony Lindgren2012-10-241-1/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's move what we can from plat/usb.h to the local usb.h for ARM common zImage support. This is needed so we can remove plat/usb.h for ARM common zImage support. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Partha Basak <parthab@india.ti.com> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: gpmc: localize gpmc headerAfzal Mohammed2012-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | Requirement of gpmc header outside of mach-omap2 has been cutoff, move gpmc header file in plat-omap folder to local mach-omap2 folder Objective - common zImage participation of omap Signed-off-by: Afzal Mohammed <afzal@ti.com>
* | ARM: OMAP2+: onenand: header cleanupAfzal Mohammed2012-10-151-0/+1
| | | | | | | | | | | | | | | | | | | | For common arm zImage existing onenand header file in platform specific location was moved to generic platform data location, but it contained more than platform data, remove it. New local header has been created for exposing functions. Signed-off-by: Afzal Mohammed <afzal@ti.com>
* | ARM: OMAP2+: nand: unify init functionsAfzal Mohammed2012-10-151-1/+1
|/ | | | | | | | | | | | | | | | | | | | | Helper function for updating nand platform data has been added the capability to take timing structure arguement. Usage of omap_nand_flash_init() has been replaced by modifed one, omap_nand_flash_init was doing things similar to board_nand_init except that NAND CS# were being acquired based on bootloader setting. As CS# is hardwired for a given board, acquiring gpmc CS# has been removed, and updated with the value on board. NAND CS# used in beagle board & omap3evm was found to be CS0. Thomas Weber <thomas.weber.linux@googlemail.com> reported that value of devkit8000 to be CS0. Overo board was found to be using CS0 based on u-boot, while google grep says omap3touchbook too has CS0. Signed-off-by: Afzal Mohammed <afzal@ti.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* Merge tag 'sound-3.7' of ↵Linus Torvalds2012-10-091-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
| * Merge tag 'v3.6-rc4' into asoc-omapMark Brown2012-09-051-0/+2
| |\ | | | | | | | | | Linux 3.6-rc4
| * | ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for ↵Peter Ujfalusi2012-08-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | selected boards These boards have similar audio setup and they can all use the same driver for audio support if it is enabled in the kernel config. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ARM: OMAP2+: Make gpmc-smsc911x.h localTony Lindgren2012-09-201-1/+1
| | | | | | | | | | | | | | | | | | This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | ARM: omap: move platform_data definitionsArnd Bergmann2012-09-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
* | | ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren2012-09-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | ARM: OMAP2+: Prepare for irqs.h removalTony Lindgren2012-09-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_endTony Lindgren2012-09-121-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can't use hardcoded interrupts for SPARSE_IRQ, and can replace the hardcoded gpio_base with twl_gpiochip.base after it's been allocated. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | ARM: OMAP: remove plat/board.h fileIgor Grinberg2012-09-101-1/+0
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | plat/board.h file is now empty - remove it. Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP3: igep0020: set GPIO mode for mux mcspi1_cs2 pinJavier Martinez Canillas2012-08-071-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the IGEPv2 Rev.C data-sheet the LAN9221i pin 14 (IRQ) is connected to the OMAP3730 mcspi1_cs2 pin. Since this omap mux pin acts as an IRQ line, it has to be configured as an input GPIO. IGEPv2 platform code sets the smsc911x_cfg->gpio_irq to GPIO 176 but since the mux pin default mode is MODE7 (safe_mode) the driver fails when trying to register the IRQ with the following error message: [ 1.994598] smsc911x: Driver version 2008-10-21 [ 3.704162] irq 272: nobody cared (try booting with the "irqpoll" option) [ 3.711364] [<c001a114>] (unwind_backtrace+0x0/0xf0) from [<c009a0d4>] (__report_bad_irq+0x20/0xbc) [ 3.720916] [<c009a0d4>] (__report_bad_irq+0x20/0xbc) from [<c009a41c>] (note_interrupt+0x1d8/0x238) [ 3.730560] [<c009a41c>] (note_interrupt+0x1d8/0x238) from [<c0098234>] (handle_irq_event_percpu+0xc0/0x260) [ 3.740936] [<c0098234>] (handle_irq_event_percpu+0xc0/0x260) from [<c0098410>] (handle_irq_event+0x3c/0x5c) [ 3.751312] [<c0098410>] (handle_irq_event+0x3c/0x5c) from [<c009abe0>] (handle_level_irq+0xac/0x10c) [ 3.761047] [<c009abe0>] (handle_level_irq+0xac/0x10c) from [<c0097a34>] (generic_handle_irq+0x30/0x48) [ 3.770935] [<c0097a34>] (generic_handle_irq+0x30/0x48) from [<c02a6b74>] (gpio_irq_handler+0x180/0x1d4) [ 3.780944] [<c02a6b74>] (gpio_irq_handler+0x180/0x1d4) from [<c0097a34>] (generic_handle_irq+0x30/0x48) [ 3.790954] [<c0097a34>] (generic_handle_irq+0x30/0x48) from [<c0013e18>] (handle_IRQ+0x4c/0xac) [ 3.800231] [<c0013e18>] (handle_IRQ+0x4c/0xac) from [<c000858c>] (omap3_intc_handle_irq+0x60/0x74) [ 3.809783] [<c000858c>] (omap3_intc_handle_irq+0x60/0x74) from [<c04979e4>] (__irq_svc+0x44/0x60) [ 3.819213] Exception stack(0xee42fde0 to 0xee42fe28) [ 3.824554] fde0: 00000001 00000001 00000000 00000000 60000013 c06cce14 c06cce14 00000110 [ 3.833190] fe00: 00000000 c06ccdf4 60000013 ee41d000 fb058064 ee42fe28 c0089e08 c04976b4 [ 3.841796] fe20: 20000013 ffffffff [ 3.845489] [<c04979e4>] (__irq_svc+0x44/0x60) from [<c04976b4>] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 3.855499] [<c04976b4>] (_raw_spin_unlock_irqrestore+0x34/0x44) from [<c0099744>] (__setup_irq+0x1b8/0x3f0) [ 3.865875] [<c0099744>] (__setup_irq+0x1b8/0x3f0) from [<c0099a34>] (request_threaded_irq+0xb8/0x140) [ 3.875701] [<c0099a34>] (request_threaded_irq+0xb8/0x140) from [<c0487950>] (smsc911x_drv_probe+0x75c/0x11a4) [ 3.886260] [<c0487950>] (smsc911x_drv_probe+0x75c/0x11a4) from [<c02e9bcc>] (platform_drv_probe+0x18/0x1c) [ 3.906707] [<c02e89b8>] (driver_probe_device+0x90/0x210) from [<c02e8bcc>] (__driver_attach+0x94/0x98) [ 3.916625] [<c02e8bcc>] (__driver_attach+0x94/0x98) from [<c02e7298>] (bus_for_each_dev+0x50/0x7c) [ 3.926177] [<c02e7298>] (bus_for_each_dev+0x50/0x7c) from [<c02e81d4>] (bus_add_driver+0x184/0x248) [ 3.935821] [<c02e81d4>] (bus_add_driver+0x184/0x248) from [<c02e909c>] (driver_register+0x78/0x12c) [ 3.945465] [<c02e909c>] (driver_register+0x78/0x12c) from [<c0008648>] (do_one_initcall+0x34/0x178) [ 3.955108] [<c0008648>] (do_one_initcall+0x34/0x178) from [<c066e8f4>] (kernel_init+0xfc/0x1c0) [ 3.964385] [<c066e8f4>] (kernel_init+0xfc/0x1c0) from [<c00140b0>] (kernel_thread_exit+0x0/0x8) [ 3.973632] handlers: [ 3.976043] [<c034e2cc>] smsc911x_irqhandler [ 3.980560] Disabling IRQ #272 Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'cleanup-initcall' of ↵Linus Torvalds2012-05-261-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson: "This is a patch series from Shawn Guo that moves from individual late_initcalls() to using a member in the machine structure to invoke a platform's late initcalls. This cleanup is a step in the move towards multiplatform kernels since it would reduce the need to check for compatible platforms in each and every initcall." Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c, imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and, in the case of cpuimx51.c the board support being deleted) * tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: use machine specific hook for late init ARM: tegra: use machine specific hook for late init ARM: shmobile: use machine specific hook for late init ARM: sa1100: use machine specific hook for late init ARM: s3c64xx: use machine specific hook for late init ARM: prima2: use machine specific hook for late init ARM: pnx4008: use machine specific hook for late init ARM: omap2: use machine specific hook for late init ARM: omap1: use machine specific hook for late init ARM: msm: use machine specific hook for late init ARM: imx: use machine specific hook for late init ARM: exynos: use machine specific hook for late init ARM: ep93xx: use machine specific hook for late init ARM: davinci: use machine specific hook for late init ARM: provide a late_initcall hook for platform initialization
| * ARM: omap2: use machine specific hook for late initShawn Guo2012-05-081-0/+2
| | | | | | | | | | Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-05-221-43/+31
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull arm-soc board specific changes from Olof Johansson: "While we generally attempt to get rid of board specific files and replace them with device tree based descriptions, a lot of platforms have not come that far: In shmobile, we add two new board files because their recently started effort to add DT support has not proceeded enough to use it for all of the important hardware. In Kirkwood, we are adding support for new boards with a combination of DT and board file contents in multiple cases. pxa/mmp and imx are extending support for existing board files but not adding new ones." Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}} * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: shmobile: fix smp build ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree kirkwood: Add iconnect support orion/kirkwood: create a generic function for gpio led blinking kirkwood/orion: fix orion_gpio_set_blink ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt kirkwood: Allow nand to be configured via. devicetree mtd: Add orion_nand devicetree bindings ARM: kirkwood: Basic support for DNS-320 and DNS-325 ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva ARM: mach-shmobile: Use DT_MACHINE for KZM9G ARM: pxa: hx4700: Add Synaptics NavPoint touchpad ARM: pxa: Use REGULATOR_SUPPLY macro ARM: mach-shmobile: kzm9g: enable SMP boot ARM: mach-shmobile: kzm9g: defconfig update ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key ARM: mach-shmobile: kzm9g: add SDHI support ARM: mach-shmobile: kzm9g: add MMCIF support ARM: mach-shmobile: kzm9g: correct screen direction ARM: mach-shmobile: sh73a0.h: add GPIO_NR ...
| * \ Merge branch 'kirkwood_boards_for_v3.5' of ↵Arnd Bergmann2012-05-151-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/jcooper/linux into next/boards * 'kirkwood_boards_for_v3.5' of git://git.infradead.org/users/jcooper/linux: ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree kirkwood: Add iconnect support orion/kirkwood: create a generic function for gpio led blinking kirkwood/orion: fix orion_gpio_set_blink ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt kirkwood: Allow nand to be configured via. devicetree mtd: Add orion_nand devicetree bindings ARM: kirkwood: Basic support for DNS-320 and DNS-325 Includes an update to v3.4-rc7 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | ARM: OMAP3: igep0020: Add support for Micron NAND Flash storage memoryJavier Martinez Canillas2012-05-091-43/+31
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IGEP-based boards can have two different flash memories, a OneNAND or a NAND device. The boot configuration pins (sys_boot) are used to specify which memory is available. Also, this patch removes unnecesary code for registering the OneNAND. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> [tony@atomide.com: fixed up a minor checkpatch warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-05-221-5/+5
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull non-critical arm-soc bug fixes from Olof Johansson: "These bug fixes were not important enough to have them included in the v3.4 release, mostly because they cover harmless warnings or unrealistic configurations. Instead we queue them up to be picked up in the next merge window." Fixed up trivial conflict in arch/arm/mach-omap2/board-omap4panda.c * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: spear6xx: remove board selection options ARM: OMAP: igep0020: Specify the VPLL2 regulator unconditionally ARM: OMAP2+: INTC: fix Kconfig option for TI81XX ARM: OMAP2+: remove incorrect irq_chip ack field ARM: OMAP4: Adding ID for OMAP4460 ES1.1 ARM: OMAP4: panda: add statics to remove warnings ARM: OMAP2+: Incorrect Register Offsets in OMAP Mailbox ARM: OMAP: fix trivial warnings for dspbridge arm: davinci: use for_each_set_bit_from ARM: OMAP4: hsmmc: check for null pointer ARM: OMAP1: fix compilation issue in board-sx1.c ARM: disable SUSPEND/ARCH_SUSPEND_POSSIBLE for ARCH_TEGRA ARM: davinci: da850-evm: fix section mismatch ARM: tegra: add pll_x freq table entry for 750MHz ARM: davinci: mark spi_board_info arguments as const ARM: davinci: fix incorrect pdctl next bit position
| * | | ARM: OMAP: igep0020: Specify the VPLL2 regulator unconditionallyLaurent Pinchart2012-05-091-5/+5
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The supply is connected to the DSS DO-D5 pins and is thus needed for both serial and parallel display interfaces on the igep0030 as well as the igep0020. If the igep0030 module isn't connected to a display, no DSI or DPI display will be specified in board code, and the DSS driver won't enable to VPLL2 regulator anyway. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-05-221-27/+5
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull first batch of arm-soc cleanups from Olof Johansson: "These cleanups are basically all over the place. The idea is to collect changes with minimal impact but large number of changes so we can avoid them from distracting in the diffstat in the other series. A significant number of lines get removed here, in particular because the ixp2000 and ixp23xx platforms get removed. These have never been extremely popular and have fallen into disuse over time with no active maintainer taking care of them. The u5500 soc never made it into a product, so we are removing it from the ux500 platform. Many good cleanups also went into the at91 and omap platforms, as has been the case for a number of releases." Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx} * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits) ARM: clps711x: Cleanup IRQ handling ARM clps711x: Removed unused header mach/time.h ARM: clps711x: Added note about support EP731x CPU to Kconfig ARM: clps711x: Added missing register definitions ARM: clps711x: Used own subarch directory for store header file Dove: Fix Section mismatch warnings ARM: orion5x: ts78xx debugging changes ARM: orion5x: remove PM dependency from ts78xx ARM: orion5x: ts78xx fix NAND resource off by one ARM: orion5x: ts78xx whitespace cleanups Orion5x: Fix Section mismatch warnings Orion5x: Fix warning: struct pci_dev declared inside paramter list ARM: clps711x: Combine header files into one for clps711x-targets ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c ARM: S3C24XX: Use common macro to define resources on mach-osiris.c ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c ARM: S5PV210: Use common macro to define resources on dev-audio.c ARM: S5PC100: Use common macro to define resources on dev-audio.c ARM: S5P64X0: Use common macro to define resources on dev-audio.c ...
| * | OMAPDSS: TFP410: rename dvi files to tfp410Tomi Valkeinen2012-05-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Now that the tfp410 driver has been renamed in the code, this patch finishes the renaming by renaming the files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| * | OMAPDSS: TFP410: rename dvi -> tfp410Tomi Valkeinen2012-05-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The driver for the TFP410 DPI-to-DVI chip was named quite badly as "DVI panel driver". This patch renames the code to use tfp410 name for the driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| * | OMAP: board-files: remove custom PD GPIO handling for DVI outputTomi Valkeinen2012-05-091-24/+2
| |/ | | | | | | | | | | | | | | Now that the panel-dvi driver handles the PD (power-down) GPIO, we can remove the custom PD handling from the board files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP: igep0020: fix smsc911x dummy regulator idEnrico Butera2012-05-091-1/+1
|/ | | | | | | | | | | | | | | | | id 0 is already used and causes errors at boot: WARNING: at fs/sysfs/dir.c:508 sysfs_add_one+0x9c/0xac() sysfs: cannot create duplicate filename '/devices/platform/reg-fixed-voltage.0' Fix it by using the next available one (id=1). This was caused by 5b3689f4 (ARM: OMAP2+: smsc911x: Add fixed board regulators) that did not account for some regulators already being used. Signed-off-by: Enrico Butera <ebutera@users.berlios.de> [tony@atomide.com: updated comments for regression causing commit] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: smsc911x: Add fixed board regulatorsRuss Dill2012-04-031-0/+6
| | | | | | | | | | | | Initialize fixed regulators in the board files. Trying to do this in a generic way in gpmc-smsc911x.c gets messy as the regulator may be provided by drivers, such as twl4030, for some boards. Signed-off-by: Russ Dill <russ.dill@ti.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> [tony@atomide.com: combined into one patch, updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pinsTony Lindgren2012-02-201-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise omap_device_build() and omap_mux related functions can't be marked as __init when twl is build as a module. If a board is using GPIO pins or regulators configured by an external chip, such as TWL PMIC on I2C bus, the board must mark those MMC controllers as deferred. Additionally both omap_hsmmc_init() and omap_hsmmc_late_init() must be called by the board. For MMC controllers using internal GPIO pins for card detect and regulators the slots don't need to be marked deferred. In this case calling omap_hsmmc_init() is sufficient. Only mark the MMC slots using gpio_cd or gpio_wd as deferred as noted by Igor Grinberg <grinberg@compulab.co.il>. Note that this patch does not change the behaviour for board-4430sdp.c board-omap4panda.c. These boards wrongly rely on the omap_hsmmc.c init function callback to configure the PMIC GPIO interrupt lines on external chip. If the PMIC interrupt lines are not configured during init, they will fail. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'restart' into for-linusRussell King2012-01-051-0/+2
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
| * ARM: restart: omap: use new restart hookRussell King2012-01-051-0/+2
| | | | | | | | | | | | | | | | Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'irqchip-consolidation' of ↵Russell King2011-11-211-0/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into devel-stable Conflicts: arch/arm/mach-omap2/board-4430sdp.c arch/arm/mach-omap2/board-omap4panda.c arch/arm/mach-omap2/include/mach/omap4-common.h arch/arm/plat-omap/include/plat/irqs.h The changes to omap4-common.h were moved to arch/arm/mach-omap2/common.h and the other trivial conflicts resolved. The now empty ifdef in irqs.h was also eliminated.
OpenPOWER on IntegriCloud