summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-cm-t3517.c
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP3: Remove cm-t3517 legacy supportTony Lindgren2015-01-131-335/+0
| | | | | | | | | | | | | This board is working with device tree based booting so there should not be any need to keep the legacy booting support around. People using this board can boot it with appended DTB with existing bootloader. By removing the 3517 legacy booting support we can get a bit closer to making all of omap3 boot in device tree only mode. Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Prepare to move GPMC to drivers by platform data headerTony Lindgren2014-11-201-2/+1
| | | | | | | | | | | | | | | | | | We still need to support platform data for omap3 until it's booting in device tree only mode. So let's add platform_data/omap-gpmc.h for that, and a minimal linux/omap-gpmc.h for the save and restore used by the PM code. Let's also keep a minimal mach-omap2/gpmc.h still around to avoid churn on the board-*.c files. Once omap3 boots in device tree only mode, we can drop mach-omap2/gpmc.h and we can make the data structures in platform_data/omap-gpmc.h private to the GPMC driver. Note that we can now also remove gpmc-nand.h and gpmc-onenand.h. Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: omap: irq: drop omap3_intc_handle_irq()Felipe Balbi2014-09-111-1/+0
| | | | | | | | | now that we're calling set_handle_irq() from init_irq(), we can safely drop all callers to omap3_intc_handle_irq() and its definition. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'omap-for-v3.10/timer-signed' of ↵Arnd Bergmann2013-04-081-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers From Tony Lindgren <tony@atomide.com>: Clean-up for omap2+ timers from Jon Hunter <jon-hunter@ti.com>: This series consists mainly of clean-ups for clockevents and clocksource timers on OMAP2+ devices. The most significant change in functionality comes from the 5th patch which is changing the selection of the clocksource timer for OMAP3 and AM335x devices when gptimers are used for clocksource. Note that this series depends on 7185684 (ARM: OMAP: use consistent error checking) in RMK's tree and 960cba6 (ARM: OMAP5: timer: Update the clocksource name as per clock data) in omap-for-v3.10/fixes-non-critical. So this branch is based on a merge of 7185684 and omap-for-v3.10/fixes-non-critical to avoid non-trivial merge conflicts. * tag 'omap-for-v3.10/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4+: Fix sparse warning in system timers ARM: OMAP2+: Store ID of system timers in timer structure ARM: OMAP3: Update clocksource timer selection ARM: OMAP2+: Simplify system timers definitions ARM: OMAP2+: Simplify system timer clock definitions ARM: OMAP2+: Remove hard-coded test on timer ID ARM: OMAP2+: Display correct system timer name ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS" ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD" ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass ARM: OMAP2+: powerdomain: avoid testing whether an unsigned char is less than 0 ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * Merge branch 'omap-timer-for-v3.10' of git://github.com/jonhunter/linux into ↵Tony Lindgren2013-04-031-1/+1
| |\ | | | | | | | | | | | | | | | | | | omap-for-v3.10/timer Conflicts: arch/arm/mach-omap2/timer.c
| | * ARM: OMAP2+: Simplify system timers definitionsJon Hunter2013-04-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a lot of redundancy in the definitions for the various system timers for OMAP2+ devices. For example, the omap3_am33xx_gptimer_timer_init() function is the same as the omap3_gp_gptimer_timer_init() function and the function omap4_sync32k_timer_init() can be re-used for OMAP5 devices. Therefore, consolidate the definitions to simplify the code. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | | ARM: OMAP3: cm-t3517: Adapt to ehci-omap changesRoger Quadros2013-04-021-6/+14
|/ / | | | | | | | | | | | | | | Use usbhs_init_phys() to register the PHY's RESET regulators and the NOP PHY devices. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-211-0/+27
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC board specific changes from Arnd Bergmann: "These updates are all for board specific code, including - defconfig updates for shmobile, davinci, bcm2835, imx, omap and tegra - SD/MMC and I2C support on bcm2835 (Raspberry PI) - minor updates for PXA - shmobile updates to GPIO usage in board files - More things in OMAP board files are moved over to device tree probing - Better support for audio devices on some OMAP platforms" * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: imx_v4_v5_defconfig: Add VPU support ARM: imx: configs: enable netfilter support ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc RX-51: Register twl4030-madc device RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers ARM: OMAP1: nokia770: enable CBUS/Retu ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies ARM: OMAP2+: craneboard: support the TPS65910 PMU ARM: OMAP2+: craneboard: support NAND device ARM: OMAP3: cm-t3517: add MMC support ARM: OMAP2+: Remove apollon board support ARM: shmobile: armadillo800eva: set clock rates before timer init ARM: tegra: defconfig updates ARM: shmobile: mackerel: Use gpio_request_one() ARM: shmobile: kzm9g: Use gpio_request_one() ARM: shmobile: bonito: Use gpio_request_one() ...
| * | ARM: OMAP3: cm-t3517: add MMC supportIgor Grinberg2013-02-011-0/+27
| | | | | | | | | | | | | | | | | | | | | cm-t3517 uses two MMC interfaces. Add support for both. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | Merge tag 'omap-for-v3.9/usb-signed' of ↵Arnd Bergmann2013-02-191-1/+1
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc These changes contain the OMAP USB related platform data changes that were dropped from linux next because of the merge conflicts as requested by me and Olof. The reason was that at this point we really should be able to do the arch/arm related changes separately from driver changes to avoid dependencies between branches. These patches were initially part of the USB related MFD patches. Based on our comments, Roger Quadros quickly reworked these patches into a shared branch between ARM SoC tree and the MFD tree, then separate patches for the OMAP platform data and MFD driver. Note that this branch will conflict with c1d1cd597fc7 ("ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code"). Please see http://lkml.org/lkml/2013/2/11/16 for the merge resolution. [arnd - resolved the merge conflict] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)Roger Quadros2013-02-141-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | Let's have a single platform data structure for the OMAP's High-Speed USB host subsystem instead of having 3 separate ones i.e. one for board data, one for USB Host (UHH) module and one for USB-TLL module. This makes the code much simpler and avoids creating multiple copies of platform data. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
* | ARM: delete struct sys_timerStephen Warren2012-12-241-1/+1
|/ | | | | | | | | | | | | | | | | | Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* Merge tag 'omap-for-v3.8/cleanup-timer-signed' of ↵Olof Johansson2012-11-291-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup Timer clean-up to get us closer to moving timer code to drivers, and to get rid of CONFIG_OMAP_32K_TIMER and rely on the board or devicetree provided timer configuration. Note that these changes are on top of the recent timer fixes. By Jon Hunter (32) and others via Tony Lindgren * tag 'omap-for-v3.8/cleanup-timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (71 commits) ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: OMAP2+: Fix compiler warning for 32k timer ARM: OMAP: Remove unnecessary inclusion of dmtimer.h ARM: OMAP: Add platform data header for DMTIMERs ARM: OMAP: Remove unnecessary omap_dm_timer structure declaration ARM: OMAP2+: Remove unnecessary local variable in timer code ARM: OMAP: Don't store timers physical address ARM: OMAP: Define omap_dm_timer_prepare function as static ARM: OMAP: Clean-up dmtimer reset code ARM: OMAP: Remove __omap_dm_timer_set_source function ARM: OMAP: Remove unnecessary call to clk_get() ARM: OMAP: Add dmtimer interrupt disable function ARM: OMAP: Fix spurious interrupts when using timer match feature ARM: OMAP: Don't restore DMTIMER interrupt status register ARM: OMAP: Don't restore of DMTIMER TISTAT register ARM: OMAP: Fix dmtimer reset for timer1 ARM: OMAP2+: Don't use __omap_dm_timer_reset() ARM: OMAP2/3: Define HWMOD software reset status for DMTIMERs ARM: OMAP3: Correct HWMOD DMTIMER SYSC register declarations ... Change/change conflict in arch/arm/mach-omap2/board-cm-t3517.c. Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: OMAP3: cm-t3517: use GPTIMER for system clockIgor Grinberg2012-11-211-1/+1
| | | | | | | | | | | | | | | | | | cm-t3517 starting from revision 1.2 does not have the 32K oscilator wired to the AM3517 SoC. Therefore switch to use the GPTIMER for system clock. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: board files: use SoC-specific system restart functionsPaul Walmsley2012-11-081-1/+1
|/ | | | | | | | | | | | Modify the board files to use the SoC-specific system restart functions. At this point it's possible to remove omap_prcm_restart() from mach-omap2/prcm.c. While removing the prototypes for the now-unused restart functions, clean up a few more obsolete prototypes in mach-omap2/clock.h. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
* Merge branch 'omap-for-v3.8/cleanup-headers-usb' into ↵Tony Lindgren2012-10-241-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap-for-v3.8/cleanup-headers Conflicts: arch/arm/mach-omap1/clock.c arch/arm/mach-omap2/board-2430sdp.c arch/arm/mach-omap2/board-4430sdp.c arch/arm/mach-omap2/board-cm-t35.c arch/arm/mach-omap2/board-igep0020.c arch/arm/mach-omap2/board-ldp.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-omap2/board-omap3logic.c arch/arm/mach-omap2/board-omap4panda.c arch/arm/mach-omap2/board-overo.c arch/arm/mach-omap2/board-rm680.c arch/arm/mach-omap2/board-rx51.c arch/arm/mach-omap2/twl-common.c arch/arm/mach-omap2/usb-host.c arch/arm/mach-omap2/usb-musb.c
| * ARM: OMAP2+: Introduce local usb.hTony Lindgren2012-10-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's move what we can from plat/usb.h to the local usb.h for ARM common zImage support. This is needed so we can remove plat/usb.h for ARM common zImage support. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Partha Basak <parthab@india.ti.com> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: gpmc: localize gpmc headerAfzal Mohammed2012-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | Requirement of gpmc header outside of mach-omap2 has been cutoff, move gpmc header file in plat-omap folder to local mach-omap2 folder Objective - common zImage participation of omap Signed-off-by: Afzal Mohammed <afzal@ti.com>
* | ARM: OMAP2+: nand: header cleanupAfzal Mohammed2012-10-151-1/+2
|/ | | | | | | | | | | | | For common arm zImage existing nand header file in platform specific location was moved to generic platform data location, but it contained more than platform data, remove it. New local header has been created for exposing functions. Also move gpmc-nand platform data to platform header meant for nand from gpmc header file Signed-off-by: Afzal Mohammed <afzal@ti.com>
* ARM: OMAP2+: Make am35xx.h localTony Lindgren2012-09-201-1/+1
| | | | | | This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: omap: move platform_data definitionsArnd Bergmann2012-09-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
* ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren2012-09-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Prepare for irqs.h removalTony Lindgren2012-09-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: cleanup struct omap_board_config_kernelIgor Grinberg2012-09-101-6/+0
| | | | | | | | | | | | struct omap_board_config_kernel defined in the board files is always empty and does not bring any added value. Remove the struct omap_board_config_kernel instances from the board files. Also remove the omap_get_nr_config() macro and the omap_get_var_config() function as both are not used for quite a long time (if ever). Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: omap2: use machine specific hook for late initShawn Guo2012-05-081-0/+1
| | | | | Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP3: cm-t3517: add EMAC supportIgor Grinberg2012-03-051-0/+2
| | | | | | | Add support for the EMAC Ethernet controller in the AM35xx SoC. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'restart' into for-linusRussell King2012-01-051-0/+1
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
| * ARM: restart: omap: use new restart hookRussell King2012-01-051-0/+1
| | | | | | | | | | | | | | | | Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'irqchip-consolidation' of ↵Russell King2011-11-211-0/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into devel-stable Conflicts: arch/arm/mach-omap2/board-4430sdp.c arch/arm/mach-omap2/board-omap4panda.c arch/arm/mach-omap2/include/mach/omap4-common.h arch/arm/plat-omap/include/plat/irqs.h The changes to omap4-common.h were moved to arch/arm/mach-omap2/common.h and the other trivial conflicts resolved. The now empty ifdef in irqs.h was also eliminated.
| * ARM: omap2plus: convert to CONFIG_MULTI_IRQ_HANDLERMarc Zyngier2011-11-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the omap2plus platforms to be using CONFIG_MULTI_IRQ_HANDLER. Each machine is modified to provide either omap2_intc_handle_irq(), omap3_intc_handle_irq() or gic_handle_irq(). This allows for a major cleanup, removing the MULTI_OMAP setup from the interrupt path. Tested on both Panda and IGEPv2 (single kernel image) Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* | ARM: 7159/1: OMAP: Introduce local common.h filesTony Lindgren2011-11-171-1/+1
|/ | | | | | | | | | | As suggested by Russell King - ARM Linux <linux@arm.linux.org.uk>, there's no need to keep local prototypes in non-local headers. Add mach-omap1/common.h and mach-omap2/common.h and move the local prototypes there from plat/common.h and mach/omap4-common.h. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'depends/rmk/devel-stable' into next/cleanupArnd Bergmann2011-10-081-1/+1
|\
| * ARM: mach-omap2: convert boot_params to atag_offsetNicolas Pitre2011-08-211-1/+1
| | | | | | | | | | | | Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
* | ARM: OMAP: Introduce SoC specific early_initTony Lindgren2011-08-241-6/+1
| | | | | | | | | | | | | | | | | | | | | | Introduce them for each omap variant and just make them all call omap2_init_common_infrastructure for now. Do this for each board-*.c file except for board-generic and board-omap3beagle as they use the same machine ID for multiple SoCs. No functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP: Move omap2_init_common_devices out of init_earlyTony Lindgren2011-08-241-1/+1
|/ | | | | | | | | | | | | | There's no need to call omap2_init_common_devices from init_early. It no longer does anything else except reprogram the memory timings for some boards, so it's better to do it later so we have a chance to get console messages if something goes wrong. Move it to happen after omap_serial_init gets called. And while patching it anyways, rename it to omap_sdrc_init as suggested by Benoit Cousson <b-cousson@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'devel-timer' into devel-cleanupTony Lindgren2011-06-291-2/+2
|\
| * omap: Set separate timer init functions to avoid cpu_is_omap testsTony Lindgren2011-06-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is needed for the following patches so we can initialize the rest of the hardware timers later on. As with the init_irq calls, there's no need to do cpu_is_omap calls during the timer init as we only care about the major omap generation. This means that we can initialize the sys_timer with the .timer entries alone. Note that for now we just set stubs for the various sys_timer entries that will get populated in a later patch. The following patches will also remove the omap_dm_timer_init calls and change the init for the rest of the hardware timers to happen with an arch_initcall. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
| * omap: Use separate init_irq functions to avoid cpu_is_omap tests earlyTony Lindgren2011-06-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This allows us to remove cpu_is_omap calls from init_irq functions. There should not be any need for cpu_is_omap calls as at this point. During the timer init we only care about SoC generation, and not about subrevisions. The main reason for the patch is that we want to initialize only minimal omap specific code from the init_early call. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
* | omap: cleanup NAND platform dataGrazvydas Ignotas2011-06-291-1/+0
|/ | | | | | | | | | | | | | | | | | omap_nand_platform_data fields 'options', 'gpio_irq', 'nand_setup' and 'dma_channel' are never referenced by the NAND driver, yet various board files are initializing those fields. This is both incorrect and confusing, so remove them. This allows to get rid of a global variable in gpmc-nand.c. This also corrects an issue where some boards are trying to pass NAND 16bit flag through .options, but the driver is using .devsize instead and ignoring .options. Finally, .dev_ready is treated as a flag by the driver, so make it bool instead of a function pointer. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: omap2plus: move NAND_BLOCK_SIZE out of boardsIgor Grinberg2011-06-011-2/+1
| | | | | | | | | | | Several boards defining mtd partitions also defined NAND_BLOCK_SIZE as SZ_128K. Move the define to common-board-devices.h This removes multiple defines of NAND_BLOCK_SIZE. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: omap3: cm-t3517: fix section mismatch warningIgor Grinberg2011-05-311-1/+1
| | | | | | | | | | | | | WARNING: arch/arm/mach-omap2/built-in.o(.text+0x11014): Section mismatch in reference from the function cm_t3517_init_usbh() to the (unknown reference) .init.data:(unknown) The function cm_t3517_init_usbh() references the (unknown reference) __initdata (unknown). This is often because cm_t3517_init_usbh lacks a __initdata annotation or the annotation of (unknown) is wrong. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: omap2plus: GPIO cleanupIgor Grinberg2011-05-121-5/+4
| | | | | | | | use gpio_request_<one|array>() instead of multiple gpiolib calls, remove unneeded variables, etc. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'omap-for-linus' of ↵Linus Torvalds2011-03-171-7/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
| * omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selectedTony Lindgren2011-03-111-0/+2
| | | | | | | | | | | | | | Fix compile when CONFIG_OMAP_MUX is not selected Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap2+: Minimize board specific init_early callsTony Lindgren2011-02-251-3/+2
| | | | | | | | | | | | | | We should only call init_common_infrastructure and init_common_devices from init_early. Signed-off-by: Tony Lindgren <tony@atomide.com>
| * ARM: OMAP2: use early init hookRussell King - ARM Linux2011-02-141-4/+4
| | | | | | | | | | | | | | | | Move non-mapping and non-irq initialization code out of .map_io and .init_irq respectively into the new init_early hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm: omap: usb: Invoke usbhs core device initializationKeshava Munegowda2011-03-011-1/+1
| | | | | | | | | | | | | | | | The usbhs intialization is invoked by all omap3 and omap4 variant board files. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | arm: omap: usb: create common enums and structures for ehci and ohciKeshava Munegowda2011-03-011-4/+4
|/ | | | | | | | Create the ehci and ohci specific platform data structures. The port enum values are made common for both ehci and ohci. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* arm: omap3: cm-t3517: minor comment fixIgor Grinberg2011-01-191-2/+2
| | | | | | | offsets in the comment were wrong - fix this. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: omap3: cm-t3517: rtc fixIgor Grinberg2011-01-191-3/+22
| | | | | | | Fix rtc gpios and mux Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
OpenPOWER on IntegriCloud