summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chainsSantosh Shilimkar2012-02-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | With the latest Sourcery G++ Lite 2011.03-41 and latest linaro tool-chains OMAP2 only build breaks with below error. arch/arm/mach-omap2/omap-smc.S: Assembler messages: arch/arm/mach-omap2/omap-smc.S:30: Error: selected processor does not support ARM mode `smc #0' arch/arm/mach-omap2/omap-smc.S:53: Error: selected processor does not support ARM mode `smc #0' arch/arm/mach-omap2/omap-smc.S:61: Error: selected processor does not support ARM mode `smc #0' arch/arm/mach-omap2/omap-smc.S:69: Error: selected processor does not support ARM mode `smc #0' arch/arm/mach-omap2/omap-smc.S:77: Error: selected processor does not support ARM mode `smc #0' make[1]: *** [arch/arm/mach-omap2/omap-smc.o] Error 1 OMAP2 devices doesn't have the security support but the security support was getting built because of OMAP2PLUS. Don't build security code for OMAP2 devices. While at it, fix the secure-common line in the Makefile to use tabs instead of spaces. Reported-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-01-091-7/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | power management changes for omap and imx A significant part of the changes for these two platforms went into power management, so they are split out into a separate branch. * tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits) ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1 ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation ARM: imx6q: resume PL310 only when CACHE_L2X0 defined ARM: imx6q: build pm code only when CONFIG_PM selected ARM: mx5: use generic irq chip pm interface for pm functions on ARM: omap: pass minimal SoC/board data for UART from dt arm/dts: Add minimal device tree support for omap2420 and omap2430 omap-serial: Add minimal device tree support omap-serial: Use default clock speed (48Mhz) if not specified omap-serial: Get rid of all pdev->id usage ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init ARM: OMAP4: PRM: use PRCM interrupt handler ARM: OMAP3: pm: use prcm chain handler ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad ARM: OMAP2+: mux: add support for PAD wakeup interrupts ARM: OMAP: PRCM: add suspend prepare / finish support ARM: OMAP: PRCM: add support for chain interrupt handler ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list ...
| * Merge branch 'tk_prm_chain_handler_devel_3.3' of ↵Tony Lindgren2011-12-161-1/+2
| |\ | | | | | | | | | | | | | | | | | | git://git.pwsan.com/linux-2.6 into prcm Conflicts: arch/arm/mach-omap2/Makefile
| | * ARM: OMAP: PRCM: add support for chain interrupt handlerTero Kristo2011-12-161-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a chained interrupt handler mechanism for the PRCM interrupt, so that individual PRCM event can cleanly be handled by handlers in separate drivers. We do this by introducing PRCM event names, which are then matched to the particular PRCM interrupt bit depending on the specific OMAP SoC being used. PRCM interrupts have two priority levels, high or normal. High priority is needed for IO event handling, so that we can be sure that IO events are processed before other events. This reduces latency for IO event customers and also prevents incorrect ack sequence on OMAP3. Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Avinash.H.M <avinashhm@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Govindraj.R <govindraj.raja@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> [paul@pwsan.com: drop some dead code; use SoC-specific pending IRQ detection; move code to prm_common.c; add lots of documentation; remove saved_mask; add OCP barrier on ISR exit; improved error handling; split out per-SoC initialization to a separate patch] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * | ARM: OMAP4: PM: Add CPUidle supportSantosh Shilimkar2011-12-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add OMAP4 CPUIDLE support. CPU1 is left with defualt idle and the low power state for it is managed via cpu-hotplug. This patch adds MPUSS low power states in cpuidle. C1 - CPU0 ON + CPU1 ON + MPU ON C2 - CPU0 OFF + CPU1 OFF + MPU CSWR C3 - CPU0 OFF + CPU1 OFF + MPU OSWR OMAP4460 onwards, MPUSS power domain doesn't support OFF state any more anymore just like CORE power domain. The deepest state supported is OSWr. Ofcourse when MPUSS and CORE PD transitions to OSWR along with device off mode, even the memory contemts are lost which is as good as the PD off state. On OMAP4 because of hardware constraints, no low power states are targeted when both CPUs are online and in SMP mode. The low power states are attempted only when secondary CPU gets offline to OFF through hotplug infrastructure. Thanks to Nicole Chalhoub <n-chalhoub@ti.com> for doing exhaustive C-state latency profiling. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | ARM: OMAP4: PM: Add CPUX OFF mode supportSantosh Shilimkar2011-12-081-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the CPU0 and CPU1 off mode support. CPUX close switch retention (CSWR) is not supported by hardware design. The CPUx OFF mode isn't supported on OMAP4430 ES1.0 CPUx sleep code is common for hotplug, suspend and CPUilde. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | ARM: OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extnSantosh Shilimkar2011-12-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP WakeupGen is the interrupt controller extension used along with ARM GIC to wake the CPU out from low power states on external interrupts. The WakeupGen unit is responsible for generating the wakeup event from the incoming interrupts and enable bits. It is implemented in the MPU always ON power domain. During normal operation, WakeupGen delivers the external interrupts directly to the GIC. WakeupGen specification has one restriction as per Veyron version 1.6. It is SW responsibility to program interrupt enabling/disabling coherently in the GIC and in the WakeupGen enable registers. That is, a given interrupt for a given CPU is either enable at both GIC and WakeupGen, or disable at both, but no mix. That's the reason the WakeupGen is implemented as an extension of GIC. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | ARM: OMAP: Add Secure HAL and monitor mode API infrastructure.Santosh Shilimkar2011-12-081-5/+6
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | On OMAP secure/emulation devices, certain APIs are exported by secure code. Add an infrastructure so that relevant operations on secure devices can be implemented using it. While at this, rename omap44xx-smc.S to omap-smc.S since the common APIs can be used on other OMAP's too. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVMHemant Pedanekar2011-12-131-0/+1
|/ | | | | | | | | | | This patch adds minimal support and build configuration for TI8148 EVM. Also adds support for low level debugging on UART1 console on the EVM. Note that existing TI8168 EVM file (board-ti8168evm.c) is updated with machine info for TI8148 EVM. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: HWMOD: Unify DSS resets for OMAPsTomi Valkeinen2011-11-081-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a custom DSS reset function used on OMAPs from OMAP2 forward. The function doesn't actually do a reset, it only waits for the reset to complete. The reason for this is that on OMAP4 there is no possibility to do a SW reset, and on OMAP2/3 doing a SW reset for dss_core resets all the other DSS modules also, thus breaking the HWMOD model where every DSS module is handled independently. This fixes the problem with DSS reset on OMAP4, caused by the fact that because there's no SW reset for dss_core on OMAP4, the HWMOD framework doesn't try to reset dss_core and thus the DSS clocks were never enabled at the same time. This causes causes the HWMOD reset to fail for dss_dispc and dss_rfbi. The common reset function will also allow us to fix another problem in the future: before doing a reset we need to disable DSS outputs, which are in some cases enabled by the bootloader, as otherwise DSS HW seems to get more or less stuck, requiring a power reset to recover. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [paul@pwsan.com: modified to build arch/arm/mach-omap2/display.o unconditionally to avoid an error when !CONFIG_OMAP2_DSS] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* Merge branch 'next/pm' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2011-11-011-4/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next/pm' of git://git.linaro.org/people/arnd/arm-soc: (66 commits) ARM: CSR: PM: use outer_resume to resume L2 cache ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII ARM: OMAP: voltage: voltage layer present, even when CONFIG_PM=n ARM: CSR: PM: add sleep entry for SiRFprimaII ARM: CSR: PM: save/restore irq status in suspend cycle ARM: CSR: PM: save/restore timer status in suspend cycle OMAP4: PM: TWL6030: add cmd register OMAP4: PM: TWL6030: fix ON/RET/OFF voltages OMAP4: PM: TWL6030: address 0V conversions OMAP4: PM: TWL6030: fix uv to voltage for >0x39 OMAP4: PM: TWL6030: fix voltage conversion formula omap: voltage: add a stub header file for external/regulator use OMAP2+: VC: more registers are per-channel starting with OMAP5 OMAP3+: voltage: update nominal voltage in voltdm_scale() not VC post-scale OMAP3+: voltage: rename omap_voltage_get_nom_volt -> voltdm_get_voltage OMAP3+: voltdm: final removal of omap_vdd_info OMAP3+: voltage: move/rename curr_volt from vdd_info into struct voltagedomain OMAP3+: voltage: rename scale and reset functions using voltdm_ prefix OMAP3+: VP: combine setting init voltage into common function OMAP3+: VP: remove unused omap_vp_get_curr_volt() ... Fix up trivial conflict in arch/arm/mach-prima2/l2x0.c (code removal vs edit)
| * Merge branch 'for_3.2/voltage-cleanup' of ↵Arnd Bergmann2011-09-301-2/+0
| |\ | | | | | | | | | git://gitorious.org/khilman/linux-omap-pm into omap/voltage
| | * ARM: OMAP: voltage: voltage layer present, even when CONFIG_PM=nKevin Hilman2011-09-211-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even when CONFIG_PM=n, we try to scale the boot voltage to a sane, known value using OPP table to find matching voltage based on boot frequency. This should be done, even when CONFIG_PM=n to avoid mis-configured bootloaders and/or boot voltage assumptions made by boot loaders. Also fixes various compile problems due to depenencies between voltage domain and powerdomain code (also present when CONFIG_PM=n). Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | Merge branch 'for_3.2/voltage-cleanup' of ↵Tony Lindgren2011-09-151-2/+3
| |\ \ | | |/ | | | | | | git://gitorious.org/khilman/linux-omap-pm into voltage
| | * OMAP2+: voltage: split out voltage processor (VP) code into new layerKevin Hilman2011-09-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is primarily a move of VP specific code from voltage.c into its own code in vp.c and adds prototypes to vp.h No functional changes, except debugfs... VP debugfs moved to 'vp' subdir of <debugfs>/voltage/ and 'vp_' prefixes removed from all debugfs filenames. Signed-off-by: Kevin Hilman <khilman@ti.com>
| | * OMAP2+: voltage: split voltage controller (VC) code into dedicated layerKevin Hilman2011-09-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As part of the voltage layer cleanup, split out VC specific code into a dedicated VC layer. This patch primarily just moves VC code from voltage.c into vc.c, and adds prototypes to vc.h. No functional changes. For readability, each function was given a local 'vc' pointer: struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; and a global replace of s/vdd->vc_data/vc/ was done. Also vc_init was renamed to vc_init_channel to reflect that this is per-VC channel initializtion. Signed-off-by: Kevin Hilman <khilman@ti.com>
| | * OMAP2: add voltage domains and connect to powerdomainsKevin Hilman2011-09-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Create basic voltagedomains for OMAP2 and associate OMAP2 powerdomains with the newly created voltage domains. While here, update copyright on powerdomain data to 2011. Signed-off-by: Kevin Hilman <khilman@ti.com>
* | | Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2011-11-011-46/+36
|\ \ \ | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc: (125 commits) ARM: mach-mxs: fix machines' initializers order mmc: mxcmmc: explicitly includes mach/hardware.h arm/imx: explicitly includes mach/hardware.h in pm-imx27.c arm/imx: remove mx27_setup_weimcs() from mx27.h arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c arm/imx: remove mx31_setup_weimcs() from mx31.h ARM: tegra: devices.c should include devices.h ARM: tegra: cpu-tegra: unexport two functions ARM: tegra: cpu-tegra: sparse type fix ARM: tegra: dma: staticify some tables and functions ARM: tegra: tegra2_clocks: don't export some tables ARM: tegra: tegra_powergate_is_powered should be static ARM: tegra: tegra_rtc_read_ms should be static ARM: tegra: tegra_init_cache should be static ARM: tegra: pcie: 0 -> NULL changes ARM: tegra: pcie: include board.h ARM: tegra: pcie: don't cast __iomem pointers ARM: tegra: tegra2_clocks: 0 -> NULL changes ARM: tegra: tegra2_clocks: don't cast __iomem pointers ARM: tegra: timer: don't cast __iomem pointers ... Fix up trivial conflicts in arch/arm/mach-omap2/Makefile, arch/arm/mach-u300/{Makefile.boot,core.c} arch/arm/plat-{mxc,omap}/devices.c
| * | Merge branch 'omap_chip_remove_cleanup_3.2' of git://git.pwsan.com/linux-2.6 ↵Tony Lindgren2011-09-151-1/+4
| |\ \ | | |/ | | | | | | into cleanup
| | * OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomainPaul Walmsley2011-09-141-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At Tony's request, remove the omap_chip bitmasks from the clockdomain and clockdomain dependency definitions. Instead, initialize clockdomains based on one or more lists that are applicable to a particular SoC family, variant, and silicon revision. Tony Lindgren <tony@atomide.com> found a bug in a previous version of this patch - thanks Tony. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
| * | omap2+: Use Kconfig symbol in Makefile instead of obj-yTony Lindgren2011-08-221-44/+32
| |/ | | | | | | | | | | | | | | | | | | As noted by Grant Likely <grant.likely@secretlab.ca>, omap2+ Makefile unnecessarily repeats entries for common device init code instead of using Kconfig symbol. Remove references to hsmmc.o and board-flash.o. Also omap_phy_internal.o references can be removed once it has some Kconfig symbol to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | usb: musb: fix build breakageFelipe Balbi2011-09-091-6/+5
|/ | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the compilation brekage which commits 208466dc ("usb: otg:OMAP4430: Powerdown the internal PHY when USB is disabled") and fb91cde4 ("usb: musb: OMAP4430: Power down the PHY during board init") introduced when building a OMAP2-only kernel. LD .tmp_vmlinux1 arch/arm/mach-omap2/built-in.o:(.data+0x7ce0): undefined reference to +`omap4430_phy_init' arch/arm/mach-omap2/built-in.o:(.data+0x7ce4): undefined reference to +`omap4430_phy_exit' arch/arm/mach-omap2/built-in.o:(.data+0x7ce8): undefined reference to +`omap4430_phy_power' arch/arm/mach-omap2/built-in.o:(.data+0x7cec): undefined reference to +`omap4430_phy_set_clk' arch/arm/mach-omap2/built-in.o:(.data+0x7cf0): undefined reference to +`omap4430_phy_suspend' make: *** [.tmp_vmlinux1] Error 1 Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* omap_hwmod: share identical omap_hwmod_mpu_irqs arraysPaul Walmsley2011-07-091-3/+8
| | | | | | | To reduce kernel source file data duplication, share struct omap_hwmod_mpu_irqs arrays across OMAP2xxx and 3xxx hwmod data files. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* omap_hwmod: share identical omap_hwmod_addr_space arraysPaul Walmsley2011-07-091-3/+8
| | | | | | | | To reduce kernel source file data duplication, share struct omap_hwmod_addr_space arrays across OMAP2xxx and 3xxx hwmod data files. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP: New twl-common for common TWL configurationPeter Ujfalusi2011-07-041-1/+1
| | | | | | | | Introduce a new file, which will be used to configure common pmic (TWL) devices, regulators, and TWL audio. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* omap2+: Rename timer-gp.c into timer.c to combine timer init functionsTony Lindgren2011-06-271-1/+1
| | | | | | | | | | | | | | | We can keep everything sys_timer and gptimer.c related code in timer.c as the code will be very minimal. Later on we can also remove timer-mpu.c, as it can be called from omap4_timer_init function. This allows us to get rid of confusing existing files. We currently have timer-gp.c, timer-mpu.c, and patches have been posted to add dmtimer.c. There's no need to have these multiple files, we can put everything into timer.c. Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'omap-for-linus' of ↵Linus Torvalds2011-05-261-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits) OMAP3: PM: Boot message is not an error, and not helpful, remove it OMAP3: cpuidle: change the power domains modes determination logic OMAP3: cpuidle: code rework for improved readability OMAP3: cpuidle: re-organize the C-states data OMAP3: clean-up mach specific cpuidle data structures OMAP3 cpuidle: remove useless SDP specific timings usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled usb: otg: OMAP4430: Fixing the omap4430_phy_init function usb: musb: am35x: fix compile error when building am35x usb: musb: OMAP4430: Power down the PHY during board init omap: drop board-igep0030.c omap: igep0020: add support for IGEP3 omap: igep0020: minor refactoring omap: igep0020: name refactoring for future merge with IGEP3 omap: Remove support for omap2evm arm: omap2plus: GPIO cleanup omap: musb: introduce default board config omap: move detection of NAND CS to common-board-devices omap: use common initialization for PMIC i2c bus omap: consolidate touch screen initialization among different boards ...
| *-. Merge branches 'devel-fixes', 'devel-cleanup' and 'devel-genirq' into for-nextTony Lindgren2011-05-171-2/+2
| |\ \
| | * | omap: drop board-igep0030.cMike Rapoport2011-05-171-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | since it is merged into board-igep0020.c Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | omap: consolidate touch screen initialization among different boardsMike Rapoport2011-05-031-0/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | Add common-board-devices.c that will contain the code for peripheral devices initializatoin shared between multiple boards. Start small with touchscreen initialization. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | Merge branch 'power-domains' into for-linusRafael J. Wysocki2011-05-171-3/+3
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * power-domains: PM: Fix build issue in clock_ops.c for CONFIG_PM_RUNTIME unset PM: Revert "driver core: platform_bus: allow runtime override of dev_pm_ops" OMAP1 / PM: Use generic clock manipulation routines for runtime PM PM / Runtime: Generic clock manipulation rountines for runtime PM (v6) PM / Runtime: Add subsystem data field to struct dev_pm_info OMAP2+ / PM: move runtime PM implementation to use device power domains PM / Platform: Use generic runtime PM callbacks directly shmobile: Use power domains for platform runtime PM PM: Export platform bus type's default PM callbacks PM: Make power domain callbacks take precedence over subsystem ones
| * | OMAP2+ / PM: move runtime PM implementation to use device power domainsKevin Hilman2011-04-291-3/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 7538e3db6e015e890825fbd9f8659952896ddd5b (PM: add support for device power domains) a better way for handling platform-specific power hooks was introduced. Rather than using the platform_bus dev_pm_ops overrides (platform_bus_set_pm_ops()), this patch moves the OMAP runtime PM implementation over to using device power domains. Since OMAP is the only user of platform_bus_set_pm_ops(), that interface can be removed (and will be in a forthcoming patch.) [rjw: Rebased on top of a previous change modifying the handling of power domains by the PM core so that power domain callbacks take precendence over subsystem-level PM callbacks.] Signed-off-by: Kevin Hilman <khilman@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* | arm: omap2: enable smc instruction for sleep34xxOskar Andero2011-04-261-1/+1
|/ | | | | | | This fixes broken build when using binutils 2.21. Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'omap-for-linus' of ↵Linus Torvalds2011-03-171-19/+47
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
| * Merge remote branch 'remotes/origin/voltage_split_2.6.39' into ↵Paul Walmsley2011-03-101-5/+17
| |\ | | | | | | | | | | | | | | | | | | tmp-integration-2.6.39-20110310-024 Conflicts: arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
| | * OMAP2+: voltage: reorganize, split code from dataPaul Walmsley2011-03-101-5/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
| | |
| | \
| | \
| | \
| | \
| | \
| *-----. \ Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', ↵Paul Walmsley2011-03-101-14/+30
| |\ \ \ \ \ | | | | |_|/ | | | |/| | | | | | | | 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024
| | | | | * OMAP4: l3: Introduce l3-interconnect error handling driverSantosh Shilimkar2011-03-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver provides the information regarding the ocp errors that gets logged in the interconnect. The error information gives the detail regarding the target that was attempted to be accessed and its corresponding address. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com>
| | | | | * OMAP3: l3: Introduce l3-interconnect error handling driverFelipe Balbi2011-03-091-0/+3
| | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver provides the information regarding the ocp errors that gets logged in the interconnect.The error info provides the details regarding the master or the target that generated the error, type of error and the corresponding address. The stack dump is also provided. Signed-off-by: sricharan <r.sricharan@ti.com> [r.sricharan@ti.com: Enhacements, major cleanup and made it functional] Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [santosh.shilimkar@ti.com: Driver design changes as per OMAP4 version] Signed-off-by: Felipe Balbi <balbi@ti.com> [balbi@ti.com: Initial version of the driver] Acked-by: Benoit Cousson <b-cousson@ti.com>
| | | | * OMAP2, 3: DSS2: Create new file display.c for central dss driver registration.Sumit Semwal2011-02-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A new file display.c is introduced for display driver init, which adds a function omap_display_init to do the DSS driver registration. This is the first step in moving away registration of DSS from board files into a common place. Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| | | * | OMAP2+: clock: add interface clock type code with autoidle supportPaul Walmsley2011-03-071-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add interface clock type code with autoidle enable/disable support. The clkops structures created in this file will be used for all OMAP2/3 interface clocks with autoidle support. They will enable the clock framework to control interface clock autoidle directly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
| | | * | OMAP2: clock: add DPLL autoidle supportPaul Walmsley2011-03-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the necessary code and data to allow the clock framework to enable and disable the OMAP2 DPLL autoidle state. This is so the direct register access can be moved out of the mach-omap2/pm24xx.c code, and other code that needs to control this (e.g., CPUIdle) can do so via an API. As part of this patch, remove the pm24xx.c code that formerly wrote directly to the autoidle bits. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
| | | * | OMAP4: DPLL: Add dpll api to control GATE_CTRLRajendra Nayak2011-02-251-1/+1
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On OMAP4, the dpll post divider outputs (MX outputs) along with clockout_x2 output provide a way to allow/deny hardware level autogating. Allowing autoidle would mean that the hw would autogate this clock when there is no dependency for it. Denying idle would mean that this clock output will be forced to stay enabled. Add dpll api's to read/allow/deny idle control for these dpll mx postdividers. NOTE: The gatectrl bit set to 0 allows gatectrl, and the bit set to 1 denies gatectrl. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: moved OMAP4-specific DPLL control code to mach-omap2/dpll44xx.c; added some documentation for CLOCK_CLKOUTX2] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * | OMAP: clockdomain: Arch specific funcs for sleep/wakeup of clkdmRajendra Nayak2011-02-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define the following architecture specific funtions for omap2/3/4 .clkdm_sleep .clkdm_wakeup Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_wakeup as clkdm_wakeup and omap2_clkdm_sleep as clkdm_sleep. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: fixed omap3_clkdm_clear_all_sleepdeps() and omap2_clkdm_clear_all_wkdeps() to test against the correct loop termination condition; thanks to Kevin Hilman for finding and helping fix] Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * | OMAP: clockdomain: Arch specific funcs to handle depsRajendra Nayak2011-02-251-0/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define the following architecture specific funtions for omap2/3 .clkdm_add_wkdep .clkdm_del_wkdep .clkdm_read_wkdep .clkdm_clear_all_wkdeps .clkdm_add_sleepdep .clkdm_del_sleepdep .clkdm_read_sleepdep .clkdm_clear_all_sleepdeps Convert the platform-independent framework to call these functions. With this also move the clkdm lookups for all wkdep_srcs and sleepdep_srcs at clkdm_init. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: fixed loop termination conditions in omap*_clkdm_clear_all_*(); thanks to Kevin Hilman for finding and helping fix those bugs; also avoid re-resolving clockdomains during init; abstracted out clkdm_dep walk] Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * Merge branch 'for-tony' of git://gitorious.org/usb/usb into omap-for-linusTony Lindgren2011-02-221-1/+2
| | |\ | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-omap2/omap_hwmod_2430_data.c arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
| | | * usb: musb: AM35x: moving internal phy functions out of usb_musb.c fileHema HK2011-02-171-1/+2
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moved all the board specific internal PHY functions out of usb_musb.c file as this file is shared between the OMAP2+ and AM35xx platforms. There exists a file which has the functions specific to internal PHY used for OMAP4 platform. Moved all phy specific functions to this file and passing these functions through board data in the board file. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * omap: add hwspinlock deviceSimon Que2011-02-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Build and register an hwspinlock platform device. Although only OMAP4 supports the hardware spinlock module (for now), it is still safe to run this initcall on all omaps, because hwmod lookup will simply fail on hwspinlock-less platforms. Signed-off-by: Simon Que <sque@ti.com> Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | *-. Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and ↵Tony Lindgren2011-02-161-10/+11
| | |\ \ | |/ / / | | | | | | | | 'devel-ti816x' into omap-for-linus
| | | * TI816X: Create board support and enable build for TI816X EVMHemant Pedanekar2011-02-161-0/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | This patch adds minimal support and build configuration for TI816X EVM. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
OpenPOWER on IntegriCloud