summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-nomadik
Commit message (Collapse)AuthorAgeFilesLines
* ARM: nomadik: bump all IRQ numbers by oneLinus Walleij2012-06-111-43/+42
| | | | | | | | | | | Since the VIC was converted to use generic IRQ domains IRQ 0 is silently ignored. This IRQ is used on the Nomadik so we're missing it now. Bump all IRQ numbers by one since they are now decoupled from the hardware IRQ numbers. Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: nomadik: register the MMC/SD deviceLinus Walleij2012-06-101-0/+24
| | | | | | | | This registers the MMC device for the Nomadik so we can access MMC/SD cards, which is pretty nice. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: nomadik: register the I2C devicesLinus Walleij2012-06-101-0/+32
| | | | | | | Add board data to register all the Nomadik I2C devices. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: nomadik: register all three I2C bussesLinus Walleij2012-06-101-7/+31
| | | | | | | | | | The Nomadik has two dedicated I2C bus blocks for I2C0 and I2C1, and a bitbanged GPIO connection on two pins for the USB portions of the STw4811 chip. Register all three as bit-banged GPIO for the moment. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: nomadik: convert to generic clockLinus Walleij2012-06-104-94/+2
| | | | | | | | | Remove more custom stuff by simply converting the Nomadik machine to use generic clocks and move the driver to drivers/clk. Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Mike Turquette <mturquette@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: nomadik: register PL031 RTCLinus Walleij2012-06-101-0/+1
| | | | | | | | This registers the PL031 derivate found in the Nomadik 8815 SoCs. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: nomadik: register AMBA devices dynamicallyLinus Walleij2012-06-102-24/+6
| | | | | | | | | This makes AMBA devices on the Nomadik main CPU die register dynamically, and refactor the registration of the RNG to use this. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: nomadik: register GPIOs dynamicallyLinus Walleij2012-06-101-67/+47
| | | | | | | | Register the NHK8815 GPIO devices dynamically like the Ux500 does it. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtdLinus Torvalds2012-06-011-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
| * mtd: nand: kill NAND_NO_AUTOINCR optionBrian Norris2012-05-131-1/+1
| | | | | | | | | | | | | | | | No drivers use auto-increment NAND, so kill the NO_AUTOINCR option entirely. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | ARM: nomadik: enable PINCTRL_NOMADIK where neededArnd Bergmann2012-05-151-0/+1
|/ | | | | | | | The nomadik gpio code has been converted to pinctrl, but the nomadik platform still expects the old code to be present. Change it to use the new one instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'cleanup2' of ↵Linus Torvalds2012-03-291-22/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: cleanups of io includes" from Olof Johansson: "Rob Herring has done a sweeping change cleaning up all of the mach/io.h includes, moving some of the oft-repeated macros to a common location and removing a bunch of boiler plate. This is another step closer to a common zImage for multiple platforms." Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes around it, tegra localtimer.o is *still* gone, yadda-yadda). * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: tegra: Include assembler.h in sleep.S to fix build break ARM: pxa: use common IOMEM definition ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol ARM: __io abuse cleanup ARM: create a common IOMEM definition ARM: iop13xx: fix missing declaration of iop13xx_init_early ARM: fix ioremap/iounmap for !CONFIG_MMU ARM: kill off __mem_pci ARM: remove bunch of now unused mach/io.h files ARM: make mach/io.h include optional ARM: clps711x: remove unneeded include of mach/io.h ARM: dove: add explicit include of dove.h to addr-map.c ARM: at91: add explicit include of hardware.h to uncompressor ARM: ep93xx: clean-up mach/io.h ARM: tegra: clean-up mach/io.h ARM: orion5x: clean-up mach/io.h ARM: davinci: remove unneeded mach/io.h include [media] davinci: remove includes of mach/io.h ARM: OMAP: Remove remaining includes for mach/io.h ARM: msm: clean-up mach/io.h ...
| * ARM: remove bunch of now unused mach/io.h filesRob Herring2012-03-061-22/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Now that many platforms don't need mach/io.h, remove the unused ones. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
* | Merge branch 'tegra/cleanups' into next/timerArnd Bergmann2012-03-214-65/+6
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-tegra/Makefile arch/arm/mach-vexpress/core.h The tegra Makefile was changed in four different branches in the same line. This merge should reduce the amount of churn. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * Merge branch 'entry-macro-cleanup' of git://sources.calxeda.com/kernel/linux ↵Russell King2012-02-221-13/+0
| |\ | | | | | | | | | into for-armsoc
| | * ARM: remove disable_fiq and arch_ret_to_user macrosRob Herring2012-02-211-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that most platforms don't need disable_fiq and arch_ret_to_user macros, we can remove the empty macros or empty entry-macro.S files. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
| * | Merge branch 'amba' into for-armsocRussell King2012-01-262-20/+6
| |\ \
| | * | ARM: amba: nomadik: use common amba device initializersRussell King2012-01-262-20/+6
| | | | | | | | | | | | | | | | | | | | | | | | Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | ARM: amba: nomadik: get rid of NO_IRQ initializersRussell King2012-01-251-2/+2
| | |/ | | | | | | | | | | | | | | | Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: big removal of now unused arch_idle()Nicolas Pitre2012-01-201-32/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | When this is the only content remaining in mach/system.h then the whole file is removed. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-and-tested-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* | ARM: plat-nomadik: get rid of global mtu base pointerLinus Walleij2012-01-312-24/+2
|/ | | | | | | | Pass the base offset to the Nomadik MTU timer in the init call instead of keeping a global pointer to be assigned. Acked-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge branch 'restart' into for-linusRussell King2012-01-055-16/+19
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
| * ARM: restart: remove the now empty arch_reset()Russell King2012-01-051-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the now empty arch_reset() from all the mach/system.h includes, and remove its callsite. Remove arm_machine_restart() as this function no longer does anything useful. For samsung platforms, remove the include of mach/system-reset.h and plat/system-reset.h from their respective mach/system.h headers as these just define their arch_reset functions. As a result, the s3c2410 and plat-samsung system-reset.h files are no longer referenced, so remove these files entirely. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: restart: nomadik: use new restart hookRussell King2012-01-054-9/+13
| | | | | | | | | | | | Hook the Nomadik NHK platform restart code into the new restart hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 7179/1: nomadik: localize cpu-8815 headerLinus Walleij2011-11-304-3/+6
| | | | | | | | | | | | | | | | | | The symbols from cpu-8815.c were being broadcast across the entire kernel but are only really used locally in mach-nomadik so let's localize them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'vmalloc' of git://git.linaro.org/people/nico/linux into ↵Russell King2011-12-051-2/+0
|\ \ | | | | | | | | | devel-stable
| * | ARM: big removal of now unused vmalloc.h filesNicolas Pitre2011-11-261-2/+0
| |/ | | | | | | Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
* | ARM: nomadik: convert to MULTI_IRQ_HANDLERJamie Iles2011-11-152-30/+2
|/ | | | | | | | | | | Now that there is a generic IRQ handler for multiple VIC devices use it for nomadik to help building multi platform kernels. Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
* Merge branch 'devel-stable' of ↵Linus Torvalds2011-10-283-30/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
| * ARM: mach-nomadik: remove mach/memory.hNicolas Pitre2011-10-131-28/+0
| | | | | | | | Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
| * ARM: add an extra temp register to the low level debugging addruart macroNicolas Pitre2011-09-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Some platforms (like OMAP not to name it) are doing rather complicated hacks just to determine the base UART address to use. Let's give their addruart macro some slack by providing an extra work register which will allow for much needed cleanups. This is basically a no-op as this commit is only adding the extra argument to the macro but no one is using it yet. Signed-off-by: nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Kevin Hilman <khilman@ti.com>
| * ARM: mach-nomadik: convert boot_params to atag_offsetNicolas Pitre2011-08-211-1/+1
| | | | | | | | | | Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
* | Merge branch 'gpio' of ↵Linus Torvalds2011-10-274-4/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
| * | ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h>Linus Walleij2011-08-231-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | After recent consolidations the Nomadik <plat/gpio.h> is entirely superfluous, so get rid of it. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 7032/1: plat-nomadik: break out GPIO driver specificsLinus Walleij2011-08-223-2/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | The <[plat|mach]/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 7022/1: allow to detect conflicting zreladdrsSascha Hauer2011-10-171-1/+1
|/ | | | | | | | | | | Boards used to specify zreladdr in their Makefile.boot with zreladdr-y := x, so conflicting zreladdrs were silently overwritten. This patch changes this to zreladdr-y += x, so that we end up with multiple words in zreladdr in such a case. We can detect this later and complain if necessary. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: Consolidate the clkdev header filesKyungmin Park2011-07-191-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now most of ARM machines has the alsmot same __clk_get/put() macro So place it at the arch/arm/include/asm/clkdev.h and remove the reduntant header files But some machines don't have the same form as above. It can use the machince specific clkdev file by HAVE_MACH_CLKDEV config Now there are only 3 caese. 1) define the clk structure with clkdev macro => Need to move clk structure to proper header file arch/arm/mach-versatile/include/mach/clkdev.h arch/arm/mach-realview/include/mach/clkdev.h arch/arm/mach-vexpress/include/mach/clkdev.h arch/arm/mach-integrator/include/mach/clkdev.h 2) export the __clk_get/put function at clock.c arch/arm/mach-shmobile/include/mach/clkdev.h 3) demuxing the clk source arch/arm/mach-u300/include/mach/clkdev.h Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* gpio: move Nomadik GPIO driver to drivers/gpioGrant Likely2011-05-261-1/+0
| | | | | | | | | This moves the Nomadik GPIO driver out of arch/arm/plat-nomadik and into the desired location indicated by the subsystem maintainer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [grant.likely: squashed with kconfig fixup] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* ARM: P2V: separate PHYS_OFFSET from platform definitionsRussell King2011-02-171-1/+1
| | | | | | | | | | | | | | | | | This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6483/1: arm & sh: factorised duplicated clkdev.cJean-Christop PLAGNIOL-VILLARD2010-11-261-1/+1
| | | | | | | | | | | | | factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture. as the code is identical at 99% put the arch specific code for allocation as example in asm/clkdev.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre2010-10-201-2/+0
| | | | | | | | | | | | | | | Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
* arm: return both physical and virtual addresses from addruartJeremy Kerr2010-10-201-7/+5
| | | | | | | | | | | | | | | | | | | | Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
* ARM: AMBA: Add pclk definition for platforms using primecellsRussell King2010-07-221-0/+4
| | | | | | | | Add a dummy clk definition for the APB pclk signal on all platforms using the AMBA bus infrastructure. This ensures that these platforms continue to work when the core amba bus code controls the APB pclk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6145/1: ux500 MTU clockrate correctionLinus Walleij2010-05-273-4/+17
| | | | | | | | | | | | | | | | | | This adjusts the clockrate for the MTU timer. On the different UX500 variants this rate is different. The platform can also have been set up at hardware initialization, bootloader or early init for different clock speeds. To have the clock framework available early so the timers can use them, the clock initialization for Nomadik and ux500 is moved to IRQ init time. A custom per-clock callback is added to handle special cases like this. This solves a user-visible bug: without this patch the current UX500 platforms will not be synchronized to wall-clock time and the platform will drift in time. Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6137/1: nomadik hwrng: Add clock supportSrinidhi Kasagar2010-05-201-0/+1
| | | | | | | | | | This adds the clock support to the Nomadik RNG driver Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus walleij <linus.walleij@stericsson.com> Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6104/1: nomadik-gpio: use clk APIRabin Vincent2010-05-061-0/+10
| | | | | | | | | | | Add clocks with appropriate names in platforms that use it, and use the clk API in nomadik-gpio. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6103/1: nomadik: define clocks staticallyRabin Vincent2010-05-063-18/+21
| | | | | | | | | | | Add a table for clocks to be defined statically, so that new clocks can be added without having to call nmdk_clk_create() for each of them. Remove the now unused nmdk_clk_create() function. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 5972/1: nomadik-gpio: convert to platform driverRabin Vincent2010-03-191-36/+47
| | | | | | | | | | | | | | | | | | | | On the U8500 platform there are four GPIO blocks, each with a 4K address space, including the peripheral identification. However, each of these blocks have a varying number of banks, each of which have 32 GPIOs and an interrupt line. The current nomadik-gpio driver implementation can handle each of these sub-banks easily with one instance each, but cannot as-is be hooked up to them because it is an AMBA driver and it expects to see a peripheral with the appropriate peripheral ids but having only one bank and only one interrupt. Solve this by converting the driver to a platform driver. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 5969/1: nomadik: move gpio to plat-nomadikRabin Vincent2010-03-194-463/+3
| | | | | | | | | | | | | | Move the Nomadik GPIO driver to plat-nomadik so that it can also be used on the Ux500 platform. The mach-nomadik include/mach/gpio.h is replaced by one that includes the one now in plat-nomadik, so that code doesn't need to include the one in plat specifically, and can instead use <linux/gpio.h> as usual. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'for-next' into for-linusJiri Kosina2010-03-081-1/+1
|\ | | | | | | | | | | | | | | | | Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
OpenPOWER on IntegriCloud