summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx
Commit message (Collapse)AuthorAgeFilesLines
* ARM i.MX6: Fix ldb_di clock selectionDirk Behme2013-04-091-1/+1
| | | | | | | | | | According to the recent i.MX6 Quad technical reference manual, mode 0x4 (100b) of the CCM_CS2DCR register (address 0x020C402C) bits [11-9] and [14-12] select the PLL3 clock, and not the PLL3 PFD1 540M clock. In our code, the PLL3 root clock is named 'pll3_usb_otg', select this instead of the 540M clock. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: provide twd clock lookup from device treeShawn Guo2013-04-091-1/+0
| | | | | | | | | | | | | | | | | | While booting from device tree, imx6q used to provide twd clock lookup by calling clk_register_clkdev() in clock driver. However, the commit bd60345 (ARM: use device tree to get smp_twd clock) forces DT boot to look up the clock from device tree. It causes the failure below when twd driver tries to get the clock, and hence kernel has to calibrate the local timer frequency. smp_twd: clock not found -2 ... Calibrating local timer... 396.13MHz. Fix the regression by providing twd clock lookup from device tree, and remove the unused twd clk_register_clkdev() call from clock driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx35 Bugfix admux clockMarkus Pargmann2013-04-091-0/+1
| | | | | | | | | | | | | The admux clock seems to be the audmux clock as tests show. audmux does not work without this clock enabled. Currently imx35 does not register a clock device for audmux. This patch adds this registration. imx-audmux driver already handles a clock device, so no changes are necessary there. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: clk-imx35: Bugfix iomux clockMarkus Pargmann2013-04-091-0/+1
| | | | | | | | | | | | | | | | | This patch enables iomuxc_gate clock. It is necessary to be able to reconfigure iomux pads. Without this clock enabled, the clk_disable_unused function will disable this clock and the iomux pads are not configurable anymore. This happens at every boot. After a reboot (watchdog system reset) the clock is not enabled again, so all iomux pad reconfigurations in boot code are without effect. The iomux pads should be always configurable, so this patch always enables it. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* Merge tag 'imx-fixes-3.9-4' of ↵Arnd Bergmann2013-03-283-0/+26
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo <shawn.guo@linaro.org>: The imx fixes for 3.9, take 4: Running suspend/resume without no_console_suspend setting on kernel cmdline will likely makes system hang. It causesd by the sync issue between imx_cpu_die() and imx_cpu_kill() call. Fix the issue by synchronizing the calls using cpu jumping argument register which is free to use in kernel. * tag 'imx-fixes-3.9-4' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx: fix sync issue between imx_cpu_die and imx_cpu_kill ARM: imx: add dependency check for DEBUG_IMX_UART_PORT Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * ARM: imx: fix sync issue between imx_cpu_die and imx_cpu_killShawn Guo2013-03-263-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a sync issue with hotplug operation. It's possible that when imx_cpu_kill gets running on primary core, the imx_cpu_die execution on the core which is to be killed hasn't been finished yet. The problem will very likely be hit when running suspend without no_console_suspend setting on kernel cmdline. It uses cpu jumping argument register to sync imx_cpu_die and imx_cpu_kill. The register will be set in imx_cpu_die and imx_cpu_kill will wait for the register being cleared to actually kill the cpu. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: <stable@vger.kernel.org>
* | Merge tag 'arm-imx-fixes-for-3.9-rc' of ↵Arnd Bergmann2013-03-152-0/+6
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.pengutronix.de/git/imx/linux-2.6 into fixes From Sascha Hauer <s.hauer@pengutronix.de>: Two small ARM i.MX fixes for v3.9-rc - Fix i.MX25 DT compilation - Enable MAX clk on i.MX35 * tag 'arm-imx-fixes-for-3.9-rc' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: i.MX35: enable MAX clock ARM: i.MX25: Fix DT compilation Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * ARM: i.MX35: enable MAX clockSascha Hauer2013-03-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i.MX35 has two bits per clock gate which are decoded as follows: 0b00 -> clock off 0b01 -> clock is on in run mode, off in wait/doze 0b10 -> clock is on in run/wait mode, off in doze 0b11 -> clock is always on The reset value for the MAX clock is 0b10. The MAX clock is needed by the SoC, yet unused in the Kernel, so the common clock framework will disable it during late init time. It will only disable clocks though which it detects as being turned on. This detection is made depending on the lower bit of the gate. If the reset value has been altered by the bootloader to 0b11 the clock framework will detect the clock as turned on, yet unused, hence it will turn it off and the system locks up. This patch turns the MAX clock on unconditionally making the Kernel independent of the bootloader. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: i.MX25: Fix DT compilationSascha Hauer2013-03-141-0/+5
| | | | | | | | | | | | | | The i.MX25 DT machine descriptor calls a non existing imx25_timer_init() function. This patch adds it to fix compilation. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: imx: pll1_sys should be an initial on clkShawn Guo2013-03-111-1/+1
| | | | | | | | | | | | | | | | | | | | We always boot from PLL1, so let's have pll1_sys in the clks_init_on list to have clk prepare/enable use count match the hardware status, so that drivers managing pll1_sys like cpufreq can get the use count right from the start. Reported-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: mach-imx: move early resume code out of the .data sectionNicolas Pitre2013-03-042-24/+9
|/ | | | | | | | | | | | | | | | Building the kernel with allyesconfig fails because the i.mx early resume code located in the .data section is unable to fixup the bl relocation as the branch target gets too far away. The idea of having code in the .data section allows for easy access to nearby data using relative addressing while the MMU is off. However it is probably best to move the code back to the .text section where it belongs and fixup the data access instead. This solves the bl reloc issue (at least until this becomes a general problem) and simplifies the code as well. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* Merge tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-283-5/+90
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC i.MX DT changes from Olof Johansson: "This branch contains of devicetree changes for the Freescale i.MX platform. The base patch of the branch changes the format of the dts files to a slightly different format that makes it easier to do derivative board definitions, but it also introduces a lot of churn in the process since every line of the file is touched. On top of that are a handful of the regular changes; enabling more boards as DT-based instead of legacy board files (mx25pdk), enabling another driver for devicetree and thus adding bindings (onewire), etc. I'm not happy about the churn, and will likely not take it for other platforms in the future." * tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: dts: add dtsi for imx6q and imx6dl ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi ARM: dts: i.MX6: Add regulator delay support ARM: dts: Add device tree entry for onewire master on i.MX53 ARM: i.MX53: Add clocks for i.mx53 onewire master. W1: Add device tree support to MXC onewire master. ARM: imx: enable imx6q-cpufreq support ARM: dts: Add apf51 basic support ARM i.MX6: change mxs usbphy clock usage ARM: dts: imx6q: Remove silicon version from SDMA firmware ARM i.MX53: dts: add oftree for MBa53 baseboard ARM i.MX53: add dts for the TQ tqma53 module ARM: dts: imx53: pinctrl update ARM i.MX51 babbage: Add keypad support ARM: dts: imx: Add imx51 KPP entry ARM: dts: imx25-karo-tx25: Put status entry in the end ARM: mx25pdk: Add device tree support ARM: dts: imx: use nodes label in board dts ARM: dts: add missing imx dtb targets ARM: boot: dts: Add an entry for imx27-pdk.dtb ...
| * Merge branch 'imx/cpuidle' into late/dtArnd Bergmann2013-02-1926-1960/+147
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | This resolves one non-obvious merge conflict between the imx cpuidle patches and the imx DT changes for 3.9. Conflicts: arch/arm/mach-imx/mach-imx6q.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | ARM: i.MX53: Add clocks for i.mx53 onewire master.Martin Fuzzey2013-02-101-1/+3
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | ARM: imx: enable imx6q-cpufreq supportShawn Guo2013-02-101-0/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update operating-points per hardware document and add support for 1 GHz and 1.2 GHz frequencies. 400 MHz, 800 MHz and 1 GHz should be supported by all i.MX6Q chips, while 1.2 GHz support needs to know from OTP fuse bit. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | ARM i.MX6: change mxs usbphy clock usagePeter Chen2013-02-101-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This mxs usbphy is only needs to be on after system boots up, and software never needs to control it anymore. Meanwhile, usbphy's parent needs to be notified if usb is suspend or not. So we design below mxs usbphy usage: - usbphy1_gate and usbphy2_gate: Their parents are dummy clock, we only needs to enable it after system boots up. - usbphy1 and usbphy2 Usage reserved bit for this clock, in that case, the refcount will be updated, but without hardware changing. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | | Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-2114-83/+163
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
| * \ \ Merge branch 'socfpga/hw' into next/socOlof Johansson2013-02-111-47/+0
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From Dinh Nguyen, this is a series of patches introducing support for socfpga hardware (Altera Cyclone5). It also includes a cleanup that moves some of the ARMv7 cache maintenance functions to a common location, since three other platforms aready implemented it separately. * socfpga/hw: arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW Trivial conflict in arch/arm/mach-tegra/headsmp.S. Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | arm: Add v7_invalidate_l1 to cache-v7.SDinh Nguyen2013-02-111-47/+0
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mach-socfpga is another platform that needs to use v7_invalidate_l1 to bringup additional cores. There was a comment that the ideal place for v7_invalidate_l1 should be in arm/mm/cache-v7.S Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Pavel Machek <pavel@denx.de> Tested-by: Stephen Warren <swarren@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Olof Johansson <olof@lixom.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | Merge tag 'v3.8-rc6' into next/socOlof Johansson2013-02-0416-70/+39
| |\ \ \ | | |/ / | | | | | | | | Linux 3.8-rc6
| * | | Merge tag 'imx6q-cpudile-3.9' of ↵Olof Johansson2013-02-0426-1952/+147
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc From Shawn Guo: imx6q cpuidle support for 3.9 - It's based on imx-cleanup-3.9 to avoid conflicts. * tag 'imx6q-cpudile-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx6q: support WAIT mode using cpuidle ARM: imx: move imx6q_cpuidle_driver into a separate file ARM: imx: mask gpc interrupts initially ARM: imx: return zero in case next event gets a large increment ARM: imx: Remove mx508 support ARM: imx: Remove mach-mx51_3ds board ARM: imx: use debug_ll_io_init() for imx6q ARM: imx: remove unused imx6q_clock_map_io() ARM: mach-imx: Kconfig: Do not select Babbage for MACH_IMX51_DT Signed-off-by: Olof Johansson <olof@lixom.net> Still, two delete/change conflicts caused by imx/cleanup: arch/arm/mach-imx/mach-mx50_rdp.c arch/arm/mach-imx/mach-mx51_3ds.c
| | * | ARM: imx6q: support WAIT mode using cpuidleShawn Guo2013-01-305-3/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add WAIT mode (ARM core clock gating) support to imx6q cpuidle driver. As WAIT mode is broken on imx6q TO 1.0 and 1.1, it only enables the support for revision 1.2 with chicken bit set. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | ARM: imx: move imx6q_cpuidle_driver into a separate fileShawn Guo2013-01-304-12/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move imx6q_cpuidle_driver into a separate file as more codes will be added when WAIT mode gets implemented as cpuidle. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | ARM: imx: mask gpc interrupts initiallyShawn Guo2013-01-301-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Mask gpc interrupts initially to avoid suspicious interrupts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | ARM: imx: return zero in case next event gets a large incrementShawn Guo2013-01-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The return of v2_set_next_event() will lead to an infinite loop in tick_handle_oneshot_broadcast() - "goto again;" with imx6q WAIT mode (to be enabled). This happens because when global event did not expire any CPU local events, the broadcast device will be rearmed to a CPU local next_event, which could be far away from now and result in a max_delta_tick programming in set_next_event(). Fix the problem by detecting those next events with increments larger than 0x7fffffff, and simply return zero in that case. It leaves mx1_2_set_next_event() unchanged since only v2_set_next_event() will be running with imx6q WAIT mode support. Thanks Russell King for helping understand the problem. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | | Merge tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6 into next/socOlof Johansson2013-01-274-23/+20
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From Sascha Hauer: ARM i.MX SoC updates for next Mostly clock related updates, most notably the conversion of i.MX31 to a DT based lookup. * tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: clk-imx35: Fix build warnings with W=1 ARM: imx27: add a clock gate to activate SPLL clock ARM: mx31: Replace clk_register_clkdev with clock DT lookup ARM: clk-imx31: Add dummy clock ARM: Let CONFIG_MACH_IMX31_DT be built by default Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: clk-imx35: Fix build warnings with W=1Fabio Estevam2013-01-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following warnings when building with W=1 option: arch/arm/mach-imx/clk-imx35.c: In function 'mx35_clocks_init': arch/arm/mach-imx/clk-imx35.c:70:12: warning: old-style function definition [-Wold-style-definition] arch/arm/mach-imx/clk-imx35.c:201:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: imx27: add a clock gate to activate SPLL clockGwenhael Goavec-Merou2013-01-251-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A clock gate is mandatory to activate SPLL clock needed, at least, for usb. Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: mx31: Replace clk_register_clkdev with clock DT lookupFabio Estevam2013-01-252-16/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: clk-imx31: Add dummy clockFabio Estevam2013-01-251-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add dummy clock as it is required by some i.mx drivers. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | | | | Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-2161-2196/+73
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
| * | | | | ARM: imx: fix imx31-dt.c time-related warningStephen Warren2013-01-311-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6bb27d7 "ARM: delete struct sys_timer" caused the following: arch/arm/mach-imx/imx31-dt.c:56:2: warning: initialization from incompatible pointer type [enabled by default] arch/arm/mach-imx/imx31-dt.c:56:2: warning: (near initialization for ‘__mach_desc_IMX31_DT.init_time’) [enabled by default] This is because mx31_clocks_init_dt() returns int, whereas the .init_time field prototype expects a function returning void. Implement a wrapper so that the prototypes match. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | | Merge tag 'imx-cleanup-3.9' of ↵Olof Johansson2013-01-2921-1940/+5
| |\ \ \ \ \ | | | |_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup From Shawn Guo: IMX cleanup for 3.9: * Remove lluart.c by using debug_ll_io_init() * Remove mach-mx51_3ds board support * Remove imx50 support which has been BROKEN for cycles * Other trival cleanups * tag 'imx-cleanup-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx: Remove mx508 support ARM: imx: Remove mach-mx51_3ds board ARM: imx: use debug_ll_io_init() for imx6q ARM: imx: remove unused imx6q_clock_map_io() ARM: mach-imx: Kconfig: Do not select Babbage for MACH_IMX51_DT Signed-off-by: Olof Johansson <olof@lixom.net> Change/delete conflicts due to some of the previous sweeping cleanups in: arch/arm/mach-imx/mach-mx50_rdp.c arch/arm/mach-imx/mach-mx51_3ds.c
| | * | | | ARM: imx: Remove mx508 supportFabio Estevam2013-01-2917-1697/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN for several releases. mx508 currently lacks clock support. In case someone needs to add mx508 support back, then the recommended approach is to use device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | | ARM: imx: Remove mach-mx51_3ds boardFabio Estevam2013-01-293-192/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mach-mx51_3ds only supports old silicon version of MX51 and was replaced with mx51 babbage, which is the official MX51 development board. No need to maintain it anymore. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | | ARM: imx: use debug_ll_io_init() for imx6qShawn Guo2013-01-294-54/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use debug_ll_io_init() to map low level debug port for imx6q, so that arch/arm/mach-imx/lluart.c can be removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | | ARM: imx: remove unused imx6q_clock_map_io()Shawn Guo2013-01-293-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | imx6q_clock_map_io() becomes an empty function since imx6q clock driver is moved to common clock framework. It's used nowhere now. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | | ARM: mach-imx: Kconfig: Do not select Babbage for MACH_IMX51_DTFabio Estevam2012-12-311-1/+0
| | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When mx51 dt support was added it was necessary to select MACH_MX51_BABBAGE in order to get the mx51 dt built without errors. At that time, there was no pinctrl support for mx51 yet. Currently there is no need to select MACH_MX51_BABBAGE anymore. Reported-by: Matt Sealy <matt@genesi-usa.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | | | Merge tag 'v3.8-rc5' into next/cleanupOlof Johansson2013-01-2716-70/+39
| |\ \ \ \ | | |_|/ / | |/| | / | | | |/ | | |/| | | | | Linux 3.8-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | Merge tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson2013-01-144-13/+4
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/cleanup From Rob Herring: Initial irqchip init infrastructure and GIC and VIC clean-ups This creates irqchip initialization infrastructure from Thomas Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips and adapted to use the new infrastructure. All DT enabled platforms using GIC and VIC are converted over to use the new irqchip_init. * tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux: irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h ARM: picoxcell: use common irqchip_init function ARM: spear: use common irqchip_init function irqchip: Move ARM VIC to drivers/irqchip ARM: samsung: remove unused tick.h ARM: remove unneeded vic.h includes ARM: remove mach .handle_irq for VIC users ARM: VIC: set handle_arch_irq in VIC initialization ARM: VIC: shrink down vic.h irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h ARM: use common irqchip_init for GIC init irqchip: Move ARM GIC to drivers/irqchip ARM: remove mach .handle_irq for GIC users ARM: GIC: set handle_arch_irq in GIC initialization ARM: GIC: remove direct use of gic_raise_softirq ARM: GIC: remove assembly ifdefs from gic.h ARM: mach-ux500: use SGI0 to wake up the other core arm: add set_handle_irq() to register the parent IRQ controller handler function irqchip: add basic infrastructure irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS Fixed up massive merge conflicts with the timer cleanup due to adjacent changes: Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-bcm/board_bcm.c arch/arm/mach-cns3xxx/cns3420vb.c arch/arm/mach-ep93xx/adssphere.c arch/arm/mach-ep93xx/edb93xx.c arch/arm/mach-ep93xx/gesbc9312.c arch/arm/mach-ep93xx/micro9.c arch/arm/mach-ep93xx/simone.c arch/arm/mach-ep93xx/snappercl15.c arch/arm/mach-ep93xx/ts72xx.c arch/arm/mach-ep93xx/vision_ep9307.c arch/arm/mach-highbank/highbank.c arch/arm/mach-imx/mach-imx6q.c arch/arm/mach-msm/board-dt-8960.c arch/arm/mach-netx/nxdb500.c arch/arm/mach-netx/nxdkn.c arch/arm/mach-netx/nxeb500hmi.c arch/arm/mach-nomadik/board-nhk8815.c arch/arm/mach-picoxcell/common.c arch/arm/mach-realview/realview_eb.c arch/arm/mach-realview/realview_pb1176.c arch/arm/mach-realview/realview_pb11mp.c arch/arm/mach-realview/realview_pba8.c arch/arm/mach-realview/realview_pbx.c arch/arm/mach-socfpga/socfpga.c arch/arm/mach-spear13xx/spear1310.c arch/arm/mach-spear13xx/spear1340.c arch/arm/mach-spear13xx/spear13xx.c arch/arm/mach-spear3xx/spear300.c arch/arm/mach-spear3xx/spear310.c arch/arm/mach-spear3xx/spear320.c arch/arm/mach-spear3xx/spear3xx.c arch/arm/mach-spear6xx/spear6xx.c arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/board-dt-tegra30.c arch/arm/mach-u300/core.c arch/arm/mach-ux500/board-mop500.c arch/arm/mach-ux500/cpu-db8500.c arch/arm/mach-versatile/versatile_ab.c arch/arm/mach-versatile/versatile_dt.c arch/arm/mach-versatile/versatile_pb.c arch/arm/mach-vexpress/v2m.c include/asm-generic/vmlinux.lds.h
| | * | | irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.hRob Herring2013-01-122-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have GIC moved to drivers/irqchip and all GIC DT init for platforms using irqchip_init, move gic.h and update the remaining includes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com>
| | * | | ARM: use common irqchip_init for GIC initRob Herring2013-01-121-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert all GIC DT initialization over to use common irqchip_init function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
| | * | | ARM: remove mach .handle_irq for GIC usersRob Herring2013-01-122-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the GIC initialization sets up the handle_arch_irq pointer, we can remove it for all machines and make it static. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
| | * | | ARM: GIC: remove direct use of gic_raise_softirqRob Herring2013-01-101-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation of moving gic code to drivers/irqchip, remove the direct platform dependencies on gic_raise_softirq. Move the setup of smp_cross_call into the gic code and use arch_send_wakeup_ipi_mask function to trigger wake-up IPIs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
| * | | | Merge branch 'clocksource/cleanup' into next/cleanupOlof Johansson2013-01-145-28/+8
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clockevent cleanup series from Shawn Guo. Resolved move/change conflict in mach-pxa/time.c due to the sys_timer cleanup. * clocksource/cleanup: clocksource: use clockevents_config_and_register() where possible ARM: use clockevents_config_and_register() where possible clockevents: export clockevents_config_and_register for module use + sync to Linux 3.8-rc3 Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-pxa/time.c
| | * | | | ARM: use clockevents_config_and_register() where possibleShawn Guo2013-01-142-24/+6
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clockevent core is able to figure out the best mult and shift, calculate min_delta_ns and max_delta_ns, with the necessary info passed into clockevents_config_and_register(). Use this combined configure and register function where possible to make the codes less error prone and gain some positive diff stat. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Tested-by: Roland Stigge <stigge@antcom.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brown <davidb@codeaurora.org> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Barry Song <baohua.song@csr.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | ARM: delete struct sys_timerStephen Warren2012-12-2439-221/+55
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | | | Merge tag 'arm-imx-clk-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann2013-02-192-3/+9
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/fixes-non-critical ARM: i.MX: clock fixes - fix wrong timer clock on i.MX25 leading to strange timing inconsistencies - fix SPI clocks for i.MX27 * tag 'arm-imx-clk-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: i.MX25: clk: parent per5_clk to AHB clock ARM: imx27: clk-imx27: SPI: Rename IPG clock and add PER clock Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | ARM: i.MX25: clk: parent per5_clk to AHB clockSteffen Trumtrar2013-02-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mxc-timer on the imx25 needs to be derived from the AHB clock. If a bootloader reparents this clock to the ipg_clk_highfreq, which according to the datasheet is a valid operation, the system can/will produce lockups/ freezes after some time [1]. This can be forced with code like while(1) syscall(SYS_clock_gettime, CLOCK_REALTIME, &tp); This was already fixed with the commit "i.MX25 GPT clock fix: ensure correct the clock source" [2], for 3.1-rc2, but was lost, when i.MX was converted to the common clock framework ("ARM i.MX25: implement clocks using common clock framework") [3] [1]: http://lists.arm.linux.org.uk/lurker/message/20130129.161230.229bda17.en.html [2]: 2012d9ca2a1381ae3e733330a7f0d1d2f1988bba [3]: 6bbaec5676e4f475b0d78743cbd4c70a8804ce14 Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: stable@vger.kernel.org # v3.5+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | | ARM: imx27: clk-imx27: SPI: Rename IPG clock and add PER clockGwenhael Goavec-Merou2013-02-051-3/+6
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | spi-imx driver needs two clock: ipg and per. The first clock must be named and the second must be added. Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OpenPOWER on IntegriCloud