summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci
Commit message (Collapse)AuthorAgeFilesLines
* ARM: includecheck fix: mach-davinci, board-dm365-evm.cJaswinder Singh Rajput2009-09-281-1/+0
| | | | | | | | | | fix the following 'make includecheck' warning: arch/arm/mach-davinci/board-dm365-evm.c: mach/common.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* DaVinci: DM646x - platform changes for vpif capture and display driversMuralidharan Karicheri2009-09-163-1/+481
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VPIF display changes (Chaithrika) Add platform device and resource structures. Also define a platform specific clock setup function that can be accessed by the driver to configure the clock and CPLD. VPIF caputure changes (Murali) 1) Modify vpif_subdev_info to add board_info, routing information and vpif interface configuration. Remove addr since it is part of board_info 2) Add code to setup channel mode and input decoder path for vpif capture driver Also incorporated comments against version v0 of the patch series and added a spinlock to protect writes to common registers Tested on DM6467 on channel 0 using TVP514x. Following bootargs used for drivers: vpif_capture.ch0_bufsize=829440 vpif_display.ch2_bufsize=829440 Signed-off-by: Manjunath Hadli <mrh@ti.com> Signed-off-by: Brijesh Jadav <brijesh.j@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM355 - platform changes for vpfe captureMuralidharan Karicheri2009-09-164-3/+167
| | | | | | | | | | | | | | | | DM355 platform and board setup This has platform and board setup changes to support vpfe capture driver for DM355 EVMs. Tested video capture on DM355 using tvp514x Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@skynet.be> Reviewed-by: David Brownell <david-b@pacbell.net> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Denys Dmytriyenko <denis@denix.org> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM644x platform changes for vpfe captureMuralidharan Karicheri2009-09-163-3/+129
| | | | | | | | | | | | | | | | DM644x platform and board setup This adds platform and board setup changes required to support vpfe capture driver on DM644x Tested video capture on DM6446 with tvp514x driver Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@skynet.be> Reviewed-by: David Brownell <david-b@pacbell.net> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Denys Dmytriyenko <denis@denix.org> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: audio: move tlv320aic33 i2c setup into board filesChaithrika U S2009-08-265-2/+19
| | | | | | | Tested on DM6446, DM355, DM6447, DA850 EVMs. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMsSandeep Paulraj2009-08-262-0/+144
| | | | | | | | | | | | For best performance, codecs often setup linked triggered transfers with a contiguous block of params, and that is when this API is used. Setup/configuration of these parameter RAMs is most efficient if they are contiguous. There is an API to allocate a set of contiguous parameter RAMs and a corresponding API to free a set of contiguous parameter RAMs Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: Adding entries for DM365 IRQ'sSandeep Paulraj2009-08-263-0/+19
| | | | | | | | | | | | | | | This patch adds definitions for some DM365 IRQs that are used by the codecs. Codecs will also use the IRQs. Entries are being added to enable/disable IRQ's. There is no use as such for these entires in the kernel itself. Instead these will be used by the "linuxutils" package of the DVSDK. For further information on IRQ muxing refer to http://focus.ti.com/lit/ug/sprufg5a/sprufg5a.pdf Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM355: Adding PINMUX entries for DM355 DisplaySandeep Paulraj2009-08-262-0/+13
| | | | | | | | This patch adds PINMUX entries for DM355 Display. These will be used by the DM355 display driver. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Handle pinmux conflict between mmc/sd and nor flashSudhakar Rajashekhara2009-08-261-21/+42
| | | | | | | | | | | | | On DA850/OMAP-L138 EVM, MMC/SD and NOR Flash share some of the AEMIF pins. This patch prints out a warning during booting, if both MMC/SD and NOR Flash are enabled in kernel menuconfig. If both MMC/SD and NOR Flash are enabled, only MMC/SD will work correctly. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add NOR flash support for da850/omap-l138Sudhakar Rajashekhara2009-08-264-0/+145
| | | | | | | | | | This patch adds platform data for the 8MB NOR flash found on da850/omap-l138 EVM. Both NOR and NAND can co-exist on da850/omap-l138 as they are using different chip selects. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add NAND flash support for DA850/OMAP-L138Sudhakar Rajashekhara2009-08-264-0/+135
| | | | | | | | | This patch adds platform data for the 512MB NAND Flash found on DA850/OMAP-L138 EVM. Currently it supports only 1-bit ECC. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add MMC/SD support for da850/omap-l138Sudhakar Rajashekhara2009-08-265-0/+115
| | | | | | | | | | | | There are two instances of MMC/SD on da850/omap-l138. Connector for the first instance is available on the EVM. This patch adds support for this instance. This patch also adds support for card detect and write protect switches on da850/omap-l138 EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add platform support for da850/omap-l138 GLCDSudhakar Rajashekhara2009-08-265-0/+180
| | | | | | | | This patch adds platform support for the graphic display (Sharp LK043T1DG01) found on DA850/OMAP-L138 based EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Macro to convert GPIO signal to GPIO pin numberSudhakar Rajashekhara2009-08-261-0/+3
| | | | | | | | Adds a macro to convert the GPIO signal passed as bank number and signal to GPIO pin number. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Audio support for DA850/OMAP-L138 EVMChaithrika U S2009-08-265-1/+133
| | | | | | | | Define resources for McASP used on DA850/OMAP-L138 EVM, add platform device defintion and Pin Mux configurations. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Audio support for DA830 EVMChaithrika U S2009-08-265-3/+85
| | | | | | | | | Define resources for McASP1 used on DA830/OMAP-L137 EVM, add platform device defintion, initialization function. Additionally, this patch also adds version and FIFO related members to platform data structure. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Correct the number of GPIO pins for da850/omap-l138Sudhakar Rajashekhara2009-08-263-3/+5
| | | | | | | | | | | | DA850/OMAP-L138 has 144 pins configurable as GPIO, but currently this has been configured as 128. This patch corrects it. Also, this patch adds the base address for GPIO pins greater than 128. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Configure MDIO pins for EMACSudhakar Rajashekhara2009-08-262-1/+7
| | | | | | | | | | | | | | | Earlier patch which adds EMAC support for da850/omap-l138 was not configuring the MDIO pins. Ethernet was working fine with the earlier patch, because the MDIO pins were configured from the boot loader. This patch removes that dependency. Also, this patch populates a member in the emac clk structure to say that EMAC LPSC sits on controller 1. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: Add Support for new Revision of siliconSandeep Paulraj2009-08-261-1/+8
| | | | | | | | | | | | | DM365 RBL has been updated. The variant number has changed for this new revision of silicon. This patch adds support for the new revision of DM365. The name fields are also being updated to reflect the version of the silicon. Without this minor fix DM365 REV 1.2 will not boot up Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: Fix Compilation issue due to PINMUX entrySandeep Paulraj2009-08-262-2/+4
| | | | | | | | The mask can hold only 8 bit values. This gave a compilation warning. This patch rectifies the warning. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: EDMA: Updating default queue handlingSandeep Paulraj2009-08-263-1/+8
| | | | | | | | | | | | | | | | EDMA queues in DM365 are a little different than those on other DaVinci's. On DM365 Q0 and Q1 have the larger FIFO size. We want Q0 and Q1 to be used by codecs and DVSDK demos. MMC driver is the only driver which uses the flag 'EVENTQ_DEFAULT'. So MMC driver should be using Q2 instead of Q1 on DM365. This patch allows us to declare a "default queue" from SOC specific code. If it is not declared then the EDMA driver assumes a default of queue 1. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: EDMA: Add queue 2 and 3 for DM365 and DM6467Sandeep Paulraj2009-08-261-0/+2
| | | | | | | | DM365 and DM6467 have 4 queues. The patch updates the 'dma_event_q' enum to reflect this. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: audio clocks: use struct device instead of clock namesKevin Hilman2009-08-267-15/+8
| | | | | | | There is no need to pass clock name strings in platform_data. Instead, setup clkdev nodes to have correct ASoC device names. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm646x-evm: Add support for IDEHemant Pedanekar2009-08-261-0/+59
| | | | | | | | Controls ATA_RSTn and ATA_PWD through CPLD register 0 to enable ATA. An I2C driver is added for the same. Calls ide init if enabled in configuration. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add EMAC support for da850/omap-l138Sudhakar Rajashekhara2009-08-264-0/+67
| | | | | | | | | | | | | | | Ethernet Media Access Controller (EMAC) on da850/omap-l138 supports 10/100 Mbps operation. It also supports Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) to physical layer (PHY). Phy which supports MII is present on the DA850/OMAP-L138 base board and Phy supporting RMII is present on the UI card. This patch adds support only for the MII Phy. Support for RMII Phy will be added later. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add support for DA850/OMAP-L138 EVM boardSudhakar Rajashekhara2009-08-265-2/+114
| | | | | | | | | | | | | | | | | | | | | Add support for the DA850/OMAP-L138 Evaluation Module (EVM) from TI. The EVM has User Interface (UI) card which contains various devices. This UI card can be connected to the base board. Support for all the devices on the UI card and ones on the EVM will be added in subsequent patches. The EVM schematics are not available publicly yet; but should be available soon. A new defconfig for this board has been added mainly because the DA830/OMAP-L137 defconfig forces writethrough cache mode which is not required on DA850/OMAP-L138. This patch has been boot tested on DA850/OMAP-L138 EVM using ramdisk as filesystem. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add base DA850/OMAP-L138 SoC supportSudhakar Rajashekhara2009-08-268-3/+712
| | | | | | | | | | | | | | The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM646x: pass correct MUSB IRQsSergei Shtylyov2009-08-261-0/+13
| | | | | | | | | DM646x has MUSB connected to IRQs 13 and 14 (unlike IRQ12 on other platforms), so pass the correct IRQ resources with the platform device. Signed-off-by: Dmitry Krivoschekov <dkrivoschekov@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Rearrange the da830/omap-l137 macros and functionsSudhakar Rajashekhara2009-08-264-38/+38
| | | | | | | | | | Rearrange the PINMUX macros and pinmux_setup function which are common between da830/omap-l137 and da850/omap-l138. Also, replace the da830 string in function names to da8xx. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Pass proper EDMA CC interrupt number for DA830/OMAP-L137Sudhakar Rajashekhara2009-08-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | In EDMA resource structure, instead of passing EDMA CC interrupt, EDMA TC error interrupt number is being passed. Before the patch: root@arago:~# cat /proc/interrupts CPU0 12: 0 cp_intc edma_error 13: 0 cp_intc edma Err: After the patch: root@arago:~# cat /proc/interrupts CPU0 11: 0 cp_intc edma 12: 0 cp_intc edma_error Err: Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Move the da830/omap-l137 #defines to header fileRajashekhara, Sudhakar2009-08-262-15/+15
| | | | | | | | | | | With the introduction of TI da850/omap-l138, some of the macros defined for da830/omap-l137 will be needed in da850 source file. So, move the common macros to da8xx.h header file. Also, modify the macro names from DA830_... to DA8XX_. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm646x: Add IDE setupHemant Pedanekar2009-08-262-0/+35
| | | | | | | | | | | | This patch adds platform data and init function for IDE which could be called from board specific file to register IDE device. Note that for 594MHz device the transfer mode is limited to UDMA4 since ideclk rate is less than 100 MHz, which forces udma_mask in palm_bk3710.c to UDMA4, while for 729MHz device, it is UDMA5. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: make arch_idle and arch_reset as inline functionsSekhar Nori2009-08-261-2/+2
| | | | | | | | | | | | | | | Make arch_idle and arch_reset inline as inline function. Not having them inline leads to a warning of this sort when only one of these functions is used: arch/arm/mach-davinci/include/mach/system.h:24: warning: 'arch_reset' \ defined but not used boot, re-boot tested on OMAP-L138 EVM Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da830: updates for mach-type name changeKevin Hilman2009-08-263-3/+3
| | | | Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Move IO device mapping macros from io.h to hardware.hHemant Pedanekar2009-08-264-23/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch takes out IO mapping macros from mach/io.h and puts them in mach/hardware.h avoiding need to include mach/io.h in various files such as serial.h, vmalloc.h etc. The main reason to avoid inclusion of mach/io.h is, when default in/out macros are overridden by machine specific functions (e.g., in case of PCI I/O), they result into linker error. An example snippet and error snapshot is listed below. Following code in mach/io.h: #define inl(p) my_inl() static inline unsigned int my_inl(unsigned int addr) { if (IS_PCI_IO(addr)) return pci_inl (); else return le32_to_cpu(__raw_readl(__typesafe_io(addr))); } leads to error: LD arch/arm/boot/compressed/vmlinux arch/arm/boot/compressed/misc.o: In function `my_inl': misc.c:(.text+0x2744): undefined reference to `pci_inl' make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1 This is because mach/io.h gets included in arch/arm/boot/compressed/misc.c through mach/serial.h but pci.c file, which defines 'pci_inl' doesn't get built into compressed vmlinux. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm646x: Add clock info and update mux setup for ATAHemant Pedanekar2009-08-261-1/+9
| | | | | | | | This patch adds clock data for IDE and also updates pin mux mask for ATA so as to disable PCI when ATA is selected. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: ASoC: Add the platform devices for ASPChaithrika U S2009-08-2610-5/+238
| | | | | | | | | | | | | 1) Registers the platform devices for ASP on dm355, dm644x and dm646x so that the machine driver can probe to get ASP related platform data. 2) Move towards definition of the asp clocks using physical name(for dm355 and dm644x) 3) Add platform data to board specific files. Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm365 gpio irq supportDavid Brownell2009-08-264-12/+105
| | | | | | | | | | | | | | | | | | | | | | | | | | | Support DM365 GPIOs ... primarily by handling non-banked GPIO IRQs: - Flag DM365 chips as using non-banked GPIO interrupts, using a new soc_info field. - Replace the gpio_to_irq() mapping logic. This now uses some runtime infrastructure, keyed off that new soc_info field, which doesn't handle irq_to_gpio(). - Provide a new irq_chip ... GPIO IRQs handled directly by AINTC still need edge triggering managed by the GPIO controller. DM365 chips no longer falsely report 104 GPIO IRQs as they boot. Intelligence about IRQ muxing is missing, so for the moment this only exposes the first eight DM365 GPIOs, which are never muxed. The next eight are muxed, half with Ethernet (which uses most of those pins anyway). Tested on DM355 (10 unbanked IRQs _or_ 104 banked ones) and also on DM365 (16 unbanked ones, only 8 made available). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM365 Updating PINMUX EntriesSandeep Paulraj2009-08-262-0/+109
| | | | | | | | Patch updates DM365 PINMUX by adding entries for Video, SPI 1 - 4, PWM 0 - 3. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da8xx: Add support for DA830/OMAP-L137 EVM boardMark A. Greer2009-08-265-2/+145
| | | | | | | | | | | | | | | | | Add support for the DA830/OMAP-L137 Evaluation Module (EVM) from TI. The EVM has User Interface (UI) and Audio cards that can be connected which contain various devices. Support for those devices and ones on the EVM will be added in subsequent patches. Additional generalizations for future SoCs in da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da8xx: Add base DA830/OMAP-L137 SoC supportMark A. Greer2009-08-2613-9/+2252
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm365 evm cpld support: leds, card detect, other setupDavid Brownell2009-08-261-10/+253
| | | | | | | | | | | | | | | | | | Add basic support for the CPLD on the DM365 EVM board: - Read SW5 to set up NAND and keypad vs (someday) OneNAND - Export MMC/SD card detect and writeprotect signals - LED support (same layout as on DM355 EVM) - Static config for video input: * external HD imager precludes MMC1, Ethernet, audio * else either tvp5146 (SD/default) or tvp7002 (HD) The video input could actually be switched around dynamically; change that if/when that's needed (and after those other video inputs have driver support). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm365: add NAND support to EVM boardSandeep Paulraj2009-08-261-0/+84
| | | | | Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: MMC/SD Support for dm365 EVMSandeep Paulraj2009-08-261-0/+27
| | | | | | | | | Patch adds support for MMC/SD in the DM365 EVM. Pinmux for MMC/SD slot 1 on the DM365 EVM is also configured. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm365: add MMC/SD supportSandeep Paulraj2009-08-261-14/+31
| | | | | Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm365: add EDMA supportSandeep Paulraj2009-08-261-0/+87
| | | | | Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm365: EMAC support for SoC and dm365 EVMSandeep Paulraj2009-08-262-2/+122
| | | | | | | | The patch adds Support for EMAC in the DM365 SOC and the DM365 EVM board. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm365: add mux entries for EDMA, RTC, EMAC, keypad.Sandeep Paulraj2009-08-262-0/+18
| | | | | Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Adding DM365 entries to Makefile/Kconfig/defconfigSandeep Paulraj2009-08-262-0/+15
| | | | | | | | | | This patch does the following 1) Adds entries to davinci_all_defconfig for DM365 2) Adds entries to the Makefile for DM365 3) Adds entries for DM365 in the Kconfig Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Adding DM365 EVM board supportSandeep Paulraj2009-08-261-0/+76
| | | | | | | | The patch adds support for Evaluation Module (EVM) board for the dm365 SoC. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
OpenPOWER on IntegriCloud