summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* ARM: davinci: Remove CDCE949 driverRickard Strandqvist2015-01-201-1/+1
| | | | | | | | | | Remove driver CDCE949 because it is not used anywhere in kernel. It has remained unused for last 5 years. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> [nsekhar@ti.com: remove additional cdce949 support vestiges and minor updates to commit text] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* ARM: davinci: remove tnetv107x supportArnd Bergmann2014-03-171-2/+0
| | | | | | | | | | | | | | The tnetv107x support does not compile, and seems to have been broken for a while with nobody caring to fix it. So far everyone I asked said it's probably dead and completely unused and will never again be needed in a future kernel release, so let's delete it. If someone finds a use for this code later and is able to get it to work again, we can always revert the removal. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org>
* ARM: davinci: move private EDMA API to arm/commonMatt Porter2013-06-181-1/+1
| | | | | | | | | | | | Move mach-davinci/dma.c to common/edma.c so it can be used by OMAP (specifically AM33xx) as well. Signed-off-by: Matt Porter <mporter@ti.com> Acked-by: Chris Ball <cjb@laptop.org> # davinci_mmc.c Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> [nsekhar@ti.com: dropped davinci sffsdr changes] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* cpufreq: davinci: move cpufreq driver to drivers/cpufreqViresh Kumar2013-04-081-1/+0
| | | | | | | | | | This patch moves cpufreq driver of ARM based davinci platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ARM: davinci: da850: add DT boot supportSekhar Nori2012-10-291-0/+1
| | | | | | | | Add support for booting DA850 using flattened device tree to describe the hardware. At this time only the very basic bootup using a serial console is supported. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* ARM: davinci: add runtime PM support for clock managementKevin Hilman2012-07-011-0/+1
| | | | | | | | | | | | | | | | | Add runtime PM core support to davinci by using the pm_clk infrastructure of the PM core. When runtime PM is enabled, the davinci runtime PM implementation will use the pm_clk layer to enable/disable clocks on demand. When runtime PM is disabled, the pm_clk core will automatically enable clocks when the driver is bound and disable clocks when the driver is unbound. Cc: Mark A. Greer <mgreer@animalcreek.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> [nsekhar@ti.com: pruned list of header file includes and removed some debug code] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* ARM: mach-davinci: remove arch specific special handling for ioremapNicolas Pitre2011-11-151-1/+1
| | | | | | A generic version should replace this later. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
* ARM: 7039/1: mach-davinci: move DaVinci TNET GPIO driver to GPIO subsystemLinus Walleij2011-08-221-1/+0
| | | | | | | | | | As per example from the other ARM boards, push the DaVinci TNET GPIO driver down to the GPIO subsystem so it can be consolidated. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 7038/1: mach-davinci: move GPIO driver to GPIO subsystemLinus Walleij2011-08-221-1/+1
| | | | | | | | | | As per example from the other ARM boards, push the DaVinci GPIO driver down to the GPIO subsystem so it can be consolidated. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* davinci: Initial support for Omapl138-HawkboardVictor Rodriguez2010-09-241-0/+1
| | | | | | | | | | | | | This patch adds initial support for the Hawkboard-L138 system It is under the machine name "omapl138_hawkboard". This system is based on the da850 davinci CPU architecture. Information on these system may be found at http://www.hawkboard.org. Basic support for the UART console is included in this patch. It's tested with latest Angstrom File Systems like ramdisk from http://alturl.com/imb45. Signed-off-by: Victor Rodriguez <victor.rodriguez@sasken.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Initial support for MityDSP-L138/MityARM-1808Michael Williamson2010-09-241-0/+1
| | | | | | | | | | | | | This patch adds initial support for the MityDSP-L138 and MityDSP-1808 system on Module (SOM) under the machine name "mityomapl138". These SOMs are based on the da850 davinci CPU architecture. Information on these SOMs may be found at http://www.mitydsp.com. Basic support for the console UART, NAND, and EMAC (MII interface) is included in this patch. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: add support for aemif timing configurationSekhar Nori2010-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support to configure the AEMIF interface with supplied timing values. Since this capability is useful both from NOR and NAND flashes, it is provided as a new interface and in a file of its own. AEMIF timing configuration is required in cases: 1) Where the AEMIF clock rate can change at runtime (a side affect of cpu frequency change). 2) Where U-Boot does not support NAND/NOR but supports other media like SPI Flash or MMC/SD and thus does not care about setting up the AEMIF timing for kernel to use. 3) Where U-Boot just hasn't configured the timing values and cannot be upgraded because the box is already in the field. Since there is now a header file for AEMIF interface, the common (non-NAND specific) defines for AEMIF registers have been moved from nand.h into the newly created aemif.h Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: tnetv107x evm board initial supportCyril Chemparathy2010-06-211-0/+1
| | | | | | | Added support for tnetv107x evaluation module. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: tnetv107x initial gpio supportCyril Chemparathy2010-06-211-0/+1
| | | | | | | | | | | | | | | | This patch adds support for the tnetv107x gpio controller. Key differences between davinci and tnetv107x controllers: - register map - davinci's controller is organized into banks of 32 gpios, tnetv107x has a single space with arrays of registers for in, out, direction, etc. - davinci's controller has separate set/clear registers for output, tnetv107x has a single direct mapped register. This patch does not yet add gpio irq support on this controller. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: tnetv107x soc supportCyril Chemparathy2010-06-211-0/+1
| | | | | | | | | | | | | | | | | | TNETV107X is a Texas Instruments SOC that shares a number of common features with the Davinci architecture. Some of the key differences between traditional Davincis and this new SOC are as follow: 1. The SOCs clock architecture includes a new spread-spectrum PLL. Some elements of the clock architecture are reused from Davinci (e.g. LPSC), but the PLL related code is overridden using existing interfaces in "struct clk". 2. The MMR layout on this SOC is substantially different from Davinci. Consequently, the fixed I/O map is a whole lot more convoluted (more so than DA8xx). The net impact here is that IO_ADDRESS() will not work on this SoC, and therefore all mappings have to be through ioremap(). Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: add CDCE949 support on DM6467 EVMNageswari Srinivasan2010-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | This patch adds the CDCE949 reference oscillator to the davinci clock list. On the DM6467T EVM, the CDCE949 is responsible for generating the pixel clock for display. On the DM6467 EVM, this pixel clock was being obtained from an internal source. This is not possible on the DM6467T EVM because of the presence of a 33MHz oscillator. The TSIF module also requires the CDCE949 to generate the data clocks. The actual clock definitions will be added by patches adding support for DM6467T VPIF and TSIF. This patch mearly lays the foundation for that work. Signed-off-by: Nageswari Srinivasan <nageswari@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: add power management supportSekhar Nori2010-02-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds core power management (suspend-to-RAM) support for DaVinci SoCs. The code depends on the the "deepsleep" feature to suspend the SoC and saves power by gating the input clock. The wakeup can be based on an external event as supported by the SoC. Assembly code (in sleep.S) is added to aid gating DDR2 clocks. Code doing this work should not be accessing DDR2. The assembly code is relocated to SRAM by the code in pm.c The support has been validated on DA850/OMAP-L138 only though the code is (hopefully) generic enough that other SoCs supporting deepsleep feature simply requires SoC specific code to start using this driver. Note that all the device drivers don't support suspend/resume still and are being worked on. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Initial support for Neuros OSD2 platform.Andrey Porodko2009-11-251-0/+1
| | | | | | | | | | | | | | | | | The Neuros OSD 2.0 is the hardware component of the Neuros Open Internet Television Platform. Hardware is very close to Ti DM644X-EVM board. It has: DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC, USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video. Additionaly realtime clock, IR remote control receiver, IR Blaster based on MSP430 (firmware although is different from used in DM644X-EVM), internal ATA-6 3.5” HDD drive with PATA interface, two muxed red-green leds. For more information please refer to http://wiki.neurostechnology.com/index.php/OSD_2.0_HD Signed-off-by: Andrey Porodko <panda@chelcom.ru> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: add CPU idle driverSekhar Nori2009-11-251-0/+1
| | | | | | | | | | | | | | | | | | | The patch adds support for DaVinci cpu idle driver. Two idle states are defined: 1. Wait for interrupt 2. Wait for interrupt and DDR self-refresh (or power down) Some DaVinci SoCs support putting DDR in self-refresh (eg Dm644x, DM6467) while others support putting DDR in self-refresh and power down (eg DM35x, DA8xx). Putting DDR (or mDDR) in power down saves more power than self-refresh. The patch has been tested on DA850/OMAP-L138 EVM. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: add generic CPUFreq driver for DaVinciSekhar Nori2009-11-251-0/+3
| | | | | | | | | | Adds a basic CPUFreq driver for DaVinci devices registering with the kernel CPUFreq infrastructure. Support is added for both frequency and voltage regulation. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add support for DA850/OMAP-L138 EVM boardSudhakar Rajashekhara2009-08-261-0/+1
| | | | | | | | | | | | | | | | | | | | | Add support for the DA850/OMAP-L138 Evaluation Module (EVM) from TI. The EVM has User Interface (UI) card which contains various devices. This UI card can be connected to the base board. Support for all the devices on the UI card and ones on the EVM will be added in subsequent patches. The EVM schematics are not available publicly yet; but should be available soon. A new defconfig for this board has been added mainly because the DA830/OMAP-L137 defconfig forces writethrough cache mode which is not required on DA850/OMAP-L138. This patch has been boot tested on DA850/OMAP-L138 EVM using ramdisk as filesystem. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add base DA850/OMAP-L138 SoC supportSudhakar Rajashekhara2009-08-261-0/+1
| | | | | | | | | | | | | | The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da8xx: Add support for DA830/OMAP-L137 EVM boardMark A. Greer2009-08-261-0/+1
| | | | | | | | | | | | | | | | | Add support for the DA830/OMAP-L137 Evaluation Module (EVM) from TI. The EVM has User Interface (UI) and Audio cards that can be connected which contain various devices. Support for those devices and ones on the EVM will be added in subsequent patches. Additional generalizations for future SoCs in da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da8xx: Add base DA830/OMAP-L137 SoC supportMark A. Greer2009-08-261-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Adding DM365 entries to Makefile/Kconfig/defconfigSandeep Paulraj2009-08-261-0/+2
| | | | | | | | | | This patch does the following 1) Adds entries to davinci_all_defconfig for DM365 2) Adds entries to the Makefile for DM365 3) Adds entries for DM365 in the Kconfig Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: add SRAM allocatorDavid Brownell2009-05-281-1/+1
| | | | | | | | | | | | | | | | | | | Provide a generic SRAM allocator using genalloc, and vaguely modeled after what AVR32 uses. This builds on top of the static CPU mapping set up in the previous patch, and returns DMA mappings as requested (if possible). Compared to its OMAP cousin, there's no current support for (currently non-existent) DaVinci power management code running in SRAM; and this has ways to deallocate, instead of being allocate-only. The initial user of this should probably be the audio code, because EDMA from DDR is subject to various dropouts on at least DM355 and DM6446 chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Integrate cp_intc support into low-level irq codeMark A. Greer2009-05-281-2/+4
| | | | | | | | | | Integrate the Common Platform Interrupt Controller (cp_intc) support into the low-level irq handling for davinci and similar platforms. Do it such that support for cp_intc and the original aintc can coexist in the same kernel binary. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Support JTAG ID register at any addressMark A. Greer2009-05-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | The Davinci cpu_is_davinci_*() macros use the SoC part number and variant retrieved from the JTAG ID register to determine the type of cpu that the kernel is running on. Currently, the code to read the JTAG ID register assumes that the register is always at the same base address. This isn't true on some newer SoCs. To solve this, have the SoC-specific code set the JTAG ID register base address in soc_info structure and add a 'cpu_id' member to it. 'cpu_id' will be used by the cpu_is_davinci_*() macros to match the cpu id. Also move the info used to identify the cpu type into the SoC-specific code to keep all SoC-specific code together. The common code will read the JTAG ID register, search through an array of davinci_id structures to identify the cpu type. Once identified, it will set the 'cpu_id' member of the soc_info structure to the proper value and the cpu_is_davinci_*() macros will now work. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Encapsulate SoC-specific data in a structureMark A. Greer2009-05-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Create a structure to encapsulate SoC-specific information. This will assist in generalizing code so it can be used by different SoCs that have similar hardware but with minor differences such as having a different base address. The idea is that the code for each SoC fills out a structure with the correct information. The board-specific code then calls the SoC init routine which in turn will call a common init routine that makes a copy of the structure, maps in I/O regions, etc. After initialization, code can get a pointer to the structure by calling davinci_get_soc_info(). Eventually, the common init routine will make a copy of all of the data pointed to by the structure so the original data can be made __init_data. That way the data for SoC's that aren't being used won't consume memory for the entire life of the kernel. The structure will be extended in subsequent patches but initially, it holds the map_desc structure for any I/O regions the SoC/board wants statically mapped. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM646x: add base SoC and board supportKevin Hilman2009-05-261-0/+2
| | | | | | | | | | Add support for DM646x SoC (a.k.a DaVinci HD) and its Evalution Module (EVM.) Original support done by Sudhakar Rajashekhara. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM355: add base SoC and board supportKevin Hilman2009-05-261-0/+3
| | | | | | | | | | | | | | In addition, add board support for the DM355 Evaluation Module (EVM) and the DM355 Leopard board. Original DM355 EVM support done by Sandeep Paulraj, with significant updates and improvements by David Brownell. DM355 Leopord support done by Koen Kooi. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Koen Kooi <koen@beagleboard.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM644x: add support for SFFSDR boardHugo Villeneuve2009-05-261-0/+1
| | | | | Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: INTC: add support for TI cp_intcSergei Shtylyov2009-05-261-0/+1
| | | | | | | | | | Add support for Texas Instuments Common Platform Interrupt Controller (cp_intc) used on DA830/OMAP-L137. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mark Greer <mgreer@mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: update DM644x support in preparation for more SoCsKevin Hilman2009-04-271-1/+4
| | | | | | | | Rework DM644x code into SoC specific and board specific parts. This is also to generalize the structure a bit so it's easier to add support for new SoCs in the DaVinci family. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: update pin-multiplexing supportKevin Hilman2009-04-271-1/+3
| | | | | | | Update MUX support to be more general and useful across multiple SoCs in the DaVinci family. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: add EDMA driverKevin Hilman2009-04-271-1/+1
| | | | | | | | | | | | Original code for 2.6.10 and 2.6.28 series done by Texas Instruments and MontaVista, but major updates and rework done by Troy Kisky and David Brownell. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* ARM: DaVinci: usb setupDavid Brownell2008-09-171-1/+1
| | | | | | | Declare the musb_hdrc platform device for DaVinci. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* ARM: DaVinci: i2c setupKomal Shah2008-09-171-1/+1
| | | | | | | | | | Davinci I2C initialization infrastructure; will be used by EVM init. [ dbrownell@users.sourceforge.net: pass platform data into init code ] Signed-off-by: Komal Shah <komal_shah802003@yahoo.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* [ARM] 4432/5: davinci: pin mux supportVladimir Barinov2007-07-121-1/+1
| | | | | | | | Support pin multiplexing configurations driver for TI DaVinci SoC Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Acked-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4457/2: davinci: GPIO supportVladimir Barinov2007-07-121-1/+2
| | | | | | | | | Support GPIO driver for TI DaVinci SoC Signed-off-by: Vladimir Barinov <vbarino@ru.mvista.com> Acked-by: David Brownell <david-b@pacbell.net> Acked-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4430/1: davinci: clock control supportVladimir Barinov2007-07-121-1/+1
| | | | | | | | Support clock control driver for TI DaVinci SoC Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4303/3: base kernel support for TI DaVinciKevin Hilman2007-05-111-0/+10
Add base kernel support for the TI DaVinci platform. This patch only includes interrupts, timers, CPU identification, serial support and basic power and sleep controller init. More drivers to come. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud