summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91
Commit message (Collapse)AuthorAgeFilesLines
* Suspend: Introduce begin() and end() callbacksRafael J. Wysocki2008-02-011-4/+13
| | | | | | | | | | | | | | | | | | | | On ACPI systems the target state set by acpi_pm_set_target() is reset by acpi_pm_finish(), but that need not be called if the suspend fails.  All platforms that use the .set_target() global suspend callback are affected by analogous issues. For this reason, we need an additional global suspend callback that will reset the target state regardless of whether or not the suspend is successful.  Also, it is reasonable to rename the .set_target() callback, since it will be used for a different purpose on ACPI systems (due to ACPI 1.0x code ordering requirements). Introduce the global suspend callback .end() to be executed at the end of the suspend sequence and rename the .set_target() global suspend callback to .begin(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* [ARM] 4615/4: sam926[13]ek buttons updatedDavid Brownell2008-01-272-4/+57
| | | | | | | | | | | | | | From: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> On the at92sam9263ek board, tell the input subsystem about the buttons. This patch is taken from Andrew Victor's at91 patchset, then updated to match the latest kernel code and to use labels printed on the board. Also update the at91sam9261ek buttons to cope with input changes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4765/1: [AT91] AT91CAP9A-DK board supportAndrew Victor2008-01-263-2/+379
| | | | | | | | Add support for the Atmel AT91CAP9A-DK Evaluation Kit board. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4764/1: [AT91] AT91CAP9 core supportAndrew Victor2008-01-268-1/+1450
| | | | | | | | | Add support for Atmel's AT91CAP9 Customizable Microcontroller family. <http://www.atmel.com/products/AT91CAP/Default.asp> Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisationChristian Glindkamp2008-01-261-5/+1
| | | | | | | | | | | Currently the udc pullup is enabled by default on boot. If the device is connected to a host at this time, the host starts the negotiation before the udc/gadget driver is ready to handle it. Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4761/1: [AT91] Board-support for NEW_LEDsAndrew Victor2008-01-264-0/+81
| | | | | | | | | | | | | Add NEW_LEDs support for the following boards: - Cogent CSB337 - Atmel AT91RM9200-DK - Atmel AT91RM9200-EK - Atmel AT91SAM9263-EK Mostly based on patch from David Brownell. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200Andrew Victor2008-01-261-2/+5
| | | | | | | | | | Due to errata regarding the handling of SPI CS0 on the AT91RM9200, the atmel_spi driver drives CS0 from the SPI controller and not as a GPIO pin. We therefore need to configure CS0 for use by the controller Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4759/1: [AT91] Buttons on CSB300Andrew Victor2008-01-261-0/+61
| | | | | | | | | Support for the 3 GPIO-connected buttons on the CSB300 board. Based on wakeup testing code from David Brownell. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4758/1: [AT91] LEDsAndrew Victor2008-01-267-112/+68
| | | | | | | | | | | Move the LED initialization code out of the various *_devices.c files, and into leds.c. Also add support for NEW_LEDs. Patch from David Brownell. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4757/1: [AT91] UART initializationAndrew Victor2008-01-265-75/+409
| | | | | | | | | | | | | | | | Modify the UART initialization to allow the board-initialization code to specify which pins are connected, and which pins should therefore be initialized. The current at91_init_serial() will continue to work as-is, but is marked as "deprecated" and will be removed once the board-specific files has been updated to use the new interface. As in the AVR32 code, we assume that the TX and RX pins will always be initialized. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4756/1: [AT91] Makefile cleanupAndrew Victor2008-01-261-13/+6
| | | | | | | Cleanup the main AT91 makefile. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4755/1: [AT91] NAND updateAndrew Victor2008-01-264-5/+5
| | | | | | | | | | | | Map the complete memory region (SZ_256M) as is done on the other AT91 processors. The SMC_SMARTMEDIA bit should be set in the EBI controller to enable the hardware NAND logic. (Patch from Sascha Erlacher) Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4754/1: [AT91] SSC library supportAndrew Victor2008-01-265-0/+683
| | | | | | | | | | Core support of the Atmel SSC library for all Atmel AT91 processors. Based on David Brownell's initial patch for the AT91RM9200. Signed-off-by: Andrew Victor <linux@maxim.org.za> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4753/1: [AT91] Use DMA_BIT_MASKAndrew Victor2008-01-265-101/+181
| | | | | | | | | Replace hard-coded DMA mask (0xffffffff) with DMA_BIT_MASK(32) as defined in dma-mapping.h. Set "dma_mask" field for the UART platform_devices. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9Andrew Victor2008-01-264-0/+225
| | | | | | | | | | | | | | | | | | Add platform_device and initialization for the RTT (Real Time Timer) and WDT (Watchdog) integrated in the Atmel AT91SAM9 processors. For SAM9263, register both RTT peripherals. [From: David Brownell <dbrownell@users.sourceforge.net>] Provide platform_resources for RTT peripherals [From: David Brownell <dbrownell@users.sourceforge.net>] Add support for RTC peripheral on AT91SAM9RL (same RTC peripherals as AT91RM9200) [From: David Brownell <dbrownell@users.sourceforge.net>] Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4751/1: [AT91] ISI peripheral on SAM9263Andrew Victor2008-01-261-0/+50
| | | | | | | | | | Add support for the Image Sensor Interface (ISI) peripheral integrated in the Atmel AT91SAM9263 processor. Patch from MaLiK Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4750/1: [AT91] STN LCD displays on SAM9261Andrew Victor2008-01-261-0/+12
| | | | | | | | | Add support for STN LCD displays on Atmel AT91SAM9261-based boards. Patch from Nicolas Ferre. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHYDavid Brownell2008-01-261-0/+1
| | | | | | | | | | On the at92sam9263ek board, tell the MACB driver the IRQ used by its PHY. This patch is taken from Andrew Victor's 2.6.23-at91 patchset; it matches board schematics. (But it's currently a NOP since the MACB driver doesn't yet use PHY irqs.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4646/1: AT91: configurable HZ, default to 128David Brownell2008-01-261-0/+16
| | | | | | | | | | | | | This makes HZ configurable on AT91, following the model used on OMAP. It defaults to a power of two on AT91rm9200 chips, avoiding rounding errors which come from dividing a 32 KiHz clock to generate scheduler irqs; and uses 100 on AT91sam926x chips, using MCK/16 (multi-MHZ). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Remy Bhmer <linux@bohmer.net> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4656/1: AT91: Tweak interrupt prioritiesAndrew Victor2008-01-264-58/+58
| | | | | | | | | Slight tweaking of the default interrupt priorities (AIC) for the integrated peripherals on the AT91RM9200, AT91SAM9260, AT91SAM9261 and AT91SAM9263 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4610/2: AT91: Support for STN LCD on SAM9261-EK board.Andrew Victor2008-01-261-7/+69
| | | | | | | | | Add STN LCD support on the Atmel AT91SAM9261-EK board. Uses a black and white screen from Hitachi: SP06Q002. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4602/3: AT91: debugfs interface to view GPIO pin stateAndrew Victor2008-01-261-0/+62
| | | | | | | | | This patch adds a debug interface (if CONFIG_DEBUG_FS is selected) to display the basic configuration and current state of the GPIO pins on the Atmel AT91 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4691/1: add missing i2c_board_info struct for at91rm9200Jan Altenberg2008-01-061-0/+9
| | | | | | | | - Add missing i2c_board_info struct for at91rm9200 Signed-off-by: Jan Altenberg <jan.altenberg@linutronix.de> Acked-by: Andrew Victor <avictor.za@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4611/2: AT91: Fix GPIO buttons pins on SAM9261-EK.Andrew Victor2007-11-261-8/+8
| | | | | | | | | | The incorrect GPIO pins are being initialized for the buttons on the Atmel AT91SAM9261-EK board. This buggy configuration turns LCD screen blue... Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4650/1: AT91: New-style init of I2C, support for i2c-gpioAndrew Victor2007-11-2618-35/+231
| | | | | | | | | | | | | | | | | The AT91 I2C driver is currently marked as "broken" due to hardware issues. This patch enables AT91-based platforms to also use the bitbanged GPIO for I2C. This updates platform setup logic (setting up an i2c-gpio device using the same pins as the i2c-at91 device, unless only the BROKEN driver is enabled). Also make use of the new-style initialization of I2C devices using i2c_register_board_info(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4604/2: AT91: Master clock divistor on SAM9Andrew Victor2007-11-261-3/+6
| | | | | | | | | | | | The calculation for the Master clock divisor (MDIV) is different on the SAM9 processors than on the AT91RM9200. Orignal patch from Sascha Erlacher. Also use the defined AT91_PMC_PRES instead of hard-coded bitmasks. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day2007-10-191-1/+1
| | | | | | | | Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* PM: Rename struct pm_ops and related thingsRafael J. Wysocki2007-10-181-2/+2
| | | | | | | | | | | | | | | | The name of 'struct pm_ops' suggests that it is related to the power management in general, but in fact it is only related to suspend.  Moreover, its name should indicate what this structure is used for, so it seems reasonable to change it to 'struct platform_suspend_ops'.  In that case, the name of the global variable of this type used by the PM core and the names of related functions should be changed accordingly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM: Move definition of struct pm_ops to suspend.hRafael J. Wysocki2007-10-181-2/+1
| | | | | | | | | | | | | | | | | | | | | | Move the definition of 'struct pm_ops' and related functions from <linux/pm.h> to <linux/suspend.h> . There are, at least, the following reasons to do that: * 'struct pm_ops' is specifically related to suspend and not to the power management in general. * As long as 'struct pm_ops' is defined in <linux/pm.h>, any modification of it causes the entire kernel to be recompiled, which is unnecessary and annoying. * Some suspend-related features are already defined in <linux/suspend.h>, so it is logical to move the definition of 'struct pm_ops' into there. * 'struct hibernation_ops', being the hibernation-related counterpart of 'struct pm_ops', is defined in <linux/suspend.h> . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [ARM] 4539/1: clocksource and clockevents for at91rm9200David Brownell2007-10-122-65/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | GENERIC_TIME and GENERIC_CLOCKEVENTS support for the at91rm9200. - Oneshot mode (used for NO_HZ and high res timers) uses the alarm to emulate a real oneshot timer; the trickiest bit is how to avoid some lowlevel races. Thanks to Remy Bohmer for various fixes to this code. - Tighten up periodic mode support using the PIT. - Streamline reads of the 32KHz counter. Thanks to Marc Pignat for some testing results: the CRTR register has *very* odd behavior. The reread appears to work around stranger glitches than just getting an old clock value (which would quickly self-correct). - Remove the rounding-up of tick_usec to 10.009 msec (32KiHz/100), since that no longer acts correct (time increases too fast). Note that the at91sam9 and at91x40 chips need other solutions, since they don't have the same system timer module. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Bill Gatliff <bgat@billgatliff.com> Acked-by:Remy Bohmer <linux@bohmer.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4536/1: configure support for AT91x40 and EB01Greg Ungerer2007-10-121-0/+23
| | | | | | | | Configuration support for the AT91x40 CPU and EB01 board. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4537/1: build support for AT91x40 and EB01Greg Ungerer2007-10-121-1/+4
| | | | | | | | Makefile build support for the Atmel AT91x40 CPU and EB01 board support. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4538/1: Atmel EB01 board supportGreg Ungerer2007-10-121-0/+44
| | | | | | | | Support for the Atmel EB01 board (based on the Atmel AT91x40 CPU). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4535/1: AT91x40 function prototypesGreg Ungerer2007-10-121-0/+3
| | | | | | | | Prototypes for the at91x40 CPU support functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4534/1: AT91x40 interrupt supportGreg Ungerer2007-10-121-0/+67
| | | | | | | | Interrupt setup support for the Atmel AT91x40 CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4533/1: AT91x40 timer supportGreg Ungerer2007-10-121-0/+80
| | | | | | | | Support for the timers in the Atmel AT91x40 family of CPUs. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4542/1: AT91: include atmel_lcdc.h in at91sam926{1,3}_devices.cJan Altenberg2007-08-042-0/+4
| | | | | | | - Include atmel_lcdc.h in at91sam926{1,3}_devices.c Signed-off-by: Jan Altenberg <jan.altenberg@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4478/1: AT91: Convert AT91RM9200 to use atmel_spi driverAndrew Victor2007-07-201-7/+3
| | | | | | | | | | | Convert the AT91RM9200 platform-setup code to use the new atmel_spi driver (and manually-driven chip-selects), instead of the legacy AT91-only SPI stack. The AT91SAM9 processors are already using the atmel_spi driver. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* csb337 supports "new style" rtc-ds1307David Brownell2007-07-171-0/+10
| | | | | | | | | | | | Update csb337 board specific init to support "new style" rtc-ds1307 code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Bill Gatliff <bgat@billgatliff.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [ARM] 4420/2: AT91: GPIO buttons on SAM9261-EK boardAndrew Victor2007-07-121-0/+66
| | | | | | | | Register the GPIO-connected buttons on the SAM9261-EK board as a "gpio-keys" platform device. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4379/1: AT91: LCD support on SAM9261-EK and SAM9263-EK boardsAndrew Victor2007-07-122-0/+128
| | | | | | | | | Add board-specific setup for the LCD on the Atmel AT91SAM9261-EK and AT91SAM9263-EK boards. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* PM: introduce set_target method in pm_opsRafael J. Wysocki2007-07-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 52ade9b3b97fd3bea42842a056fe0786c28d0555 changed the suspend code ordering to execute pm_ops->prepare() after the device model per-device .suspend() calls in order to fix some ACPI-related issues. Unfortunately, it broke the at91 platform which assumed that pm_ops->prepare() would be called before suspending devices. at91 used pm_ops->prepare() to get notified of the target system sleep state, so that it could use this information while suspending devices. However, with the current suspend code ordering pm_ops->prepare() is called too late for this purpose. Thus, at91 needs an additional method in 'struct pm_ops' that will be used for notifying the platform of the target system sleep state. Moreover, in the future such a method will also be needed by ACPI. This patch adds the .set_target() method to 'struct pm_ops' and makes the suspend code call it, if implemented, before executing the device model per-device .suspend() calls. It also modifies the at91 code to use pm_ops->set_target() instead of pm_ops->prepare(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [ARM] 4419/1: AT91: SAM9 USB clocks check for suspendingAndrew Victor2007-06-021-6/+5
| | | | | | | | | | | When suspending to slow-clock mode, at91_pm_verify_clocks() is called to ensure that all the clocks are disabled or in the correct state. This patch replaces the "#warning TODO" messages for the SAM9 processors with the correct code. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4418/1: AT91: Number of programmable clocks differsAndrew Victor2007-06-021-5/+0
| | | | | | | | | | | | | | The number of programmable clocks available on the AT91 processors can differ, therefore do not always display the contents of the PMC_PCKR(0) .. PMC_PCKR(3) registers (ie, assume there are 4 clocks). If CONFIG_AT91_PROGRAMMABLE_CLOCKS is enabled, the programmable clocks will be registered like the other system/peripheral clocks, and the state of the programmable clocks will be displayed like with the other clocks. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Fix some section mismatch warningsRussell King2007-05-305-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | The following patch fixes these section mismatch warnings: WARNING: arch/arm/mach-at91/built-in.o(.text+0xdf4): Section mismatch: reference to .init.data:dk_nand_partition (between 'nand_partitions' and 'at91_leds_event') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (between 'nand_partitions' and 'ads7843_pendown_state') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xc28): Section mismatch: reference to .init.data:kb9202_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-footbridge/built-in.o(.text+0xaa4): Section mismatch: reference to .init.data:cats_pci (between 'cats_pci_init' and 'ebsa285_leds_event')WARNING: arch/arm/mach-ixp2000/built-in.o(.text+0xb54): Section mismatch: reference to .init.text:ixp2000_init_irq (between 'ixdp2x00_init_irq' and 'ixdp2x00_irq_handler') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x670): Section mismatch: reference to .init.text:ixp23xx_pci_common_init (between 'ixp23xx_pci_slave_init' and 'ixp23xx_pci_scan_bus') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x890): Section mismatch: reference to .init.text:ixp23xx_init_irq (between 'ixdp2351_init_irq' and 'roadrunner_pci_preinit') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x9a8): Section mismatch: reference to .init.text:ixp23xx_pci_preinit (after 'roadrunner_pci_preinit') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x80): Section mismatch: reference to .init.text:imx_set_mmc_info (between '__ksymtab_imx_set_mmc_info' and '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x88): Section mismatch: reference to .init.text:set_imx_fb_info (after '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-sa1100/built-in.o(.text+0x1930): Section mismatch: reference to .init.data:neponset_port_fns (between 'neponset_probe' and 'assabet_leds_event') WARNING: drivers/built-in.o(.text+0x3f100): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x3f1c8): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4f988): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4fa50): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] spelling fixesSimon Arlott2007-05-201-4/+4
| | | | | | | Spelling fixes in arch/arm/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'fixes' into develRussell King2007-05-122-0/+4
|\
| * [ARM] 4364/1: AT91: LEDS on AT91SAM9261-EKAndrew Victor2007-05-112-0/+4
| | | | | | | | | | | | | | | | | | | | Attached you can find a patch needed to make the LEDS for 'CPU-Idle' and 'Timer' work on the AT91SAM9261-EK board. The kernel configuration options are already there, but the implementation is not available. Signed-off-by: Remy Bohmer <l.pinguin@gmail.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [ARM] 4371/1: AT91: Support for Atmel AT91SAM9RL-EK development boardAndrew Victor2007-05-113-0/+221
| | | | | | | | | | | | | | | | Add support for the Atmel AT91SAM9RL-EK development board. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [ARM] 4372/1: Define byte sizes in asm-arm/sizes.hAndrew Victor2007-05-115-16/+0
| | | | | | | | | | | | | | | | | | | | Define SZ_512, SZ_256 and SZ_16 in asm-arm/sizes.h. Remove the definitions from the at91*_devices.c files. (Dependent on ARM patch #4370/2) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud