summaryrefslogtreecommitdiffstats
path: root/arch/arm/kernel
Commit message (Collapse)AuthorAgeFilesLines
* ARM: 7892/1: Fix warning for V7M buildsOlof Johansson2013-11-191-1/+1
| | | | | | | | | | | | Fixes a harmless warning when building for V7M (!MMU): arch/arm/kernel/traps.c:859:123: warning: 'kuser_init' defined but not used [-Wunused-function] By making the stub static inline instead of just static. Fixes: f6f91b0d9fd9 ('ARM: allow kuser helpers to be removed from the vector page') Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BEVictor Kamensky2013-11-141-1/+5
| | | | | | | | | | | | | Fix patching code to convert mov instruction into mvn instruction in case of CONFIG_ARCH_PHYS_ADDR_T_64BIT and CONFIG_ARM_PATCH_PHYS_VIRT. In BE case store into r0 proper bits so byte swapped instruction could be modified correctly. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Reviewed-by: R Sricharan <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 7881/1: __fixup_smp read of SCU config should do byteswap in BE caseVictor Kamensky2013-11-141-0/+1
| | | | | | | | | | | | Commit "bc41b8724f24b9a27d1dcc6c974b8f686b38d554 ARM: 7846/1: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices" added read of SCU config register into __fixup_smp function. Such read should be followed by byteswap, if kernel runs in BE mode. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2013-11-1421-143/+389
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
| *-. Merge branches 'fixes', 'mmci' and 'sa11x0' into for-nextRussell King2013-11-122-4/+11
| |\ \
| | * | ARM: 7880/1: Clear the IT state independent of the Thumb-2 modeT.J. Purtell2013-11-071-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ARM architecture reference specifies that the IT state bits in the PSR must be all zeros in ARM mode or behavior is unspecified. On the Qualcomm Snapdragon S4/Krait architecture CPUs the processor continues to consider the IT state bits while in ARM mode. This makes it so that some instructions are skipped by the CPU. Signed-off-by: T.J. Purtell <tj@mobisocial.us> [rmk+kernel@arm.linux.org.uk: fixed whitespace formatting in patch] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | ARM: 7876/1: clear Thumb-2 IT state on exception handlingMarc Zyngier2013-11-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The exception handling code fails to clear the IT state, potentially leading to incorrect execution of the fixup if the size of the IT block is more than one. Let fixup_exception do the IT sanitizing if a fixup has been found, and restore CPSR from the stack when returning from a data abort. Cc: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | Merge branch 'devel-stable' into for-nextRussell King2013-11-1217-118/+296
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/include/asm/atomic.h arch/arm/include/asm/hardirq.h arch/arm/kernel/smp.c
| | * \ \ Merge branch 'baserock/bjdooks/312-rc4/be/core-v3' of ↵Russell King2013-10-3011-85/+177
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.baserock.org/delta/linux into devel-stable Conflicts: arch/arm/kernel/head.S This series has been well tested and it would be great to get this merged now. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * | | ARM: signal: sigreturn_codes should be endian neutral to work in BE8Victor Kamensky2013-10-193-24/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of BE8 kernel data is in BE order whereas code stays in LE order. Move sigreturn_codes to separate .S file and use proper assembler mnemonics for these code snippets. In this case compiler will take care of proper instructions byteswaps for BE8 case. Change assumes that sufficiently Thumb-capable tools are used to build kernel. Problem was discovered during ltp testing of BE system: all rt_sig* tests failed. Tested against the same tests in both BE and LE modes. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
| | | * | | ARM: Correct BUG() assembly to ensure it is endian-agnosticBen Dooks2013-10-191-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently BUG() uses .word or .hword to create the necessary illegal instructions. However if we are building BE8 then these get swapped by the linker into different illegal instructions in the text. This means that the BUG() macro does not get trapped properly. Change to using <asm/opcodes.h> to provide the necessary ARM instruction building as we cannot rely on gcc/gas having the `.inst` instructions which where added to try and resolve this issue (reported by Dave Martin <Dave.Martin@arm.com>). Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Dave Martin <Dave.Martin@arm.com>
| | | * | | ARM: module: correctly relocate instructions in BE8Ben Dooks2013-10-191-23/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When in BE8 mode, our instructions are not in the same ordering as the data, so use <asm/opcodes.h> to take this into account. Note, also requires modules to be built --be8 Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Dave Martin <Dave.Martin@arm.com>
| | | * | | ARM: traps: use <asm/opcodes.h> to get correct instruction orderBen Dooks2013-10-191-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The trap handler needs to take into account the endian configuration of the system when loading instructions. Use <asm/opcodes.h> to provide the necessary conversion functions. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
| | | * | | ARM: smp_scu: data endian fixesBen Dooks2013-10-191-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The smp_scu driver needs to use the relaxed readl/write accessors to avoid any issues with the endian mode the processor core is in. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
| | | * | | ARM: twd: data endian fixBen Dooks2013-10-191-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure the twd driver uses the correct calls to access the hardware to ensure that we do not end up with data in the wrong endian format. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
| | | * | | ARM: set BE8 if LE in head codeBen Dooks2013-10-192-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we are booting in LE and compiled for BE8, then add code to set the state to bE8. Since the instruction stream is always LE, we do not need to do anything special to the instruction. Also ensure that the secondary processors are started in the same mode. Note, we do add about 20 bytes to the kernel image, but it seems easier to do this than adding another configuration to change. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
| | | * | | ARM: fixup_pv_table bug when CPU_ENDIAN_BE8Ben Dooks2013-10-191-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fixup_pv_table assumes that the instructions are in the same endian configuration as the data, but when the CPU is running in BE8 the instructions stay in little-endian format. Make sure if CONFIG_CPU_ENDIAN_BE8 is set that we do all the alterations to the instructions taking in to account the LDR/STR will be swapping the data endian-ness. Since the code is only modifying a byte, we avoid dual-swapping the data, and just change the bits we clear and ORR in (in the case where the code is not thumb2). For thumb2, we add the necessary rev16 instructions to ensure that the instructions are processed in the correct format, as it was easier than re-writing the code to contain a mask and shift. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
| | | * | | ARM: asm: Add ARM_BE8() assembly helperBen Dooks2013-10-192-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ARM_BE8() helper to wrap any code conditional on being compile when CONFIG_ARM_ENDIAN_BE8 is selected and convert existing places where this is to use it. Acked-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
| | * | | | ARM: 7870/1: head: Fix the missing underscore in __ARMEB__ macro and .align ↵Sricharan R2013-10-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | keyword Commit 'f52bb722547f43caeaecbcc62db9f3c3b80ead9b' Author: Sricharan R <r.sricharan@ti.com> ARM: mm: Correct virt_to_phys patching for 64 bit physical addresses introduced a __ARMEB__ macro usage in a new place, but missed the second underscore. So correcting it here. Also a explicit .align keyword is needed for the label with .long data-type to be aligned on the 4 byte boundary. Otherwise this can cause problem for thumb2 build. So adding it here. Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | | Merge branch 'for-rmk/perf' of ↵Russell King2013-10-233-2/+32
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable
| | | * | | | ARM: perf: fix group validation for mixed software and hardware groupsWill Deacon2013-10-091-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since software events can always be scheduled, perf allows software and hardware events to be mixed together in the same event group. There are two ways in which this can come about: (1) A SW event is added to a HW group. This validates using the HW PMU of the group leader. (2) A HW event is added to a SW group. This inserts the SW events and the new HW event into a HW context, but the SW event remains the group leader. When validating the latter case, we would ideally compare the PMU of each event in the group with the relevant HW PMU. The problem is, in the face of potentially multiple HW PMUs, we don't have a handle on the relevant structure. Commit 7b9f72c62ed0 ("ARM: perf: clean up event group validation") attempting to resolve this issue, but actually made things *worse* by comparing with the leader PMU. If the leader is a SW event, then we automatically `pass' all the HW events during validation! This patch removes the check against the leader PMU. Whilst this will allow events from multiple HW PMUs to be grouped together, that should probably be dealt with in perf core as the result of a later patch. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
| | | * | | | ARM: perf: add support for perf registers APIWill Deacon2013-09-302-0/+31
| | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements the functions required for the perf registers API, allowing the perf tool to interface kernel register dumps with libunwind in order to provide userspace backtracing. Cc: Jean Pihet <jean.pihet@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
| | * | | | Merge branch 'for-rmk/arm-mm-lpae' of ↵Russell King2013-10-184-17/+53
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into devel-stable This series extends the existing ARM v2p runtime patching for 64 bit. Needed for LPAE machines which have physical memory beyond 4GB.
| | | * | | | ARM: mm: Recreate kernel mappings in early_paging_init()Santosh Shilimkar2013-10-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a step in the init sequence, in order to recreate the kernel code/data page table mappings prior to full paging initialization. This is necessary on LPAE systems that run out of a physical address space outside the 4G limit. On these systems, this implementation provides a machine descriptor hook that allows the PHYS_OFFSET to be overridden in a machine specific fashion. Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
| | | * | | | ARM: mm: Correct virt_to_phys patching for 64 bit physical addressesSricharan R2013-10-102-16/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current phys_to_virt patching mechanism works only for 32 bit physical addresses and this patch extends the idea for 64bit physical addresses. The 64bit v2p patching mechanism patches the higher 8 bits of physical address with a constant using 'mov' instruction and lower 32bits are patched using 'add'. While this is correct, in those platforms where the lowmem addressable physical memory spawns across 4GB boundary, a carry bit can be produced as a result of addition of lower 32bits. This has to be taken in to account and added in to the upper. The patched __pv_offset and va are added in lower 32bits, where __pv_offset can be in two's complement form when PA_START < VA_START and that can result in a false carry bit. e.g 1) PA = 0x80000000; VA = 0xC0000000 __pv_offset = PA - VA = 0xC0000000 (2's complement) 2) PA = 0x2 80000000; VA = 0xC000000 __pv_offset = PA - VA = 0x1 C0000000 So adding __pv_offset + VA should never result in a true overflow for (1). So in order to differentiate between a true carry, a __pv_offset is extended to 64bit and the upper 32bits will have 0xffffffff if __pv_offset is 2's complement. So 'mvn #0' is inserted instead of 'mov' while patching for the same reason. Since mov, add, sub instruction are to patched with different constants inside the same stub, the rotation field of the opcode is using to differentiate between them. So the above examples for v2p translation becomes for VA=0xC0000000, 1) PA[63:32] = 0xffffffff PA[31:0] = VA + 0xC0000000 --> results in a carry PA[63:32] = PA[63:32] + carry PA[63:0] = 0x0 80000000 2) PA[63:32] = 0x1 PA[31:0] = VA + 0xC0000000 --> results in a carry PA[63:32] = PA[63:32] + carry PA[63:0] = 0x2 80000000 The above ideas were suggested by Nicolas Pitre <nico@linaro.org> as part of the review of first and second versions of the subject patch. There is no corresponding change on the phys_to_virt() side, because computations on the upper 32-bits would be discarded anyway. Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
| | | * | | | ARM: mm: Introduce virt_to_idmap() with an arch hookSantosh Shilimkar2013-10-101-1/+1
| | | | |_|/ | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some PAE systems (e.g. TI Keystone), memory is above the 32-bit addressable limit, and the interconnect provides an aliased view of parts of physical memory in the 32-bit addressable space. This alias is strictly for boot time usage, and is not otherwise usable because of coherency limitations. On such systems, the idmap mechanism needs to take this aliased mapping into account. This patch introduces virt_to_idmap() and a arch function pointer which can be populated by platform which needs it. Also populate necessary idmap spots with now available virt_to_idmap(). Avoided #ifdef approach to be compatible with multi-platform builds. Most architecture won't touch it and in that case virt_to_idmap() fall-back to existing virt_to_phys() macro. Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
| | * | | | Merge branch 'arm-aesbs' of ↵Russell King2013-10-072-6/+6
| | |\ \ \ \ | | | | |/ / | | | |/| | | | | | | | git://git.linaro.org/people/ardbiesheuvel/linux-arm into devel-stable
| | * | | | ARM: SMP: basic IPI triggered completion supportNicolas Pitre2013-09-231-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need a mechanism to let an inbound CPU signal that it is alive before even getting into the kernel environment i.e. from early assembly code. Using an IPI is the simplest way to achieve that. This adds some basic infrastructure to register a struct completion pointer to be "completed" when the dedicated IPI for this task is received. Signed-off-by: Nicolas Pitre <nico@linaro.org>
| | * | | | Merge branch 'iks_for_rmk' of git://git.linaro.org/people/nico/linux into ↵Russell King2013-09-172-18/+16
| | |\ \ \ \ | | | |_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devel-stable Nicolas Pitre writes: This is the first part of the patch series adding IKS (In-Kernel Switcher) support for big.LITTLE system architectures. This consists of the core patches only. Extra patches to come later will introduce various optimizations and tracing support. Those patches were posted on the list a while ago here: http://news.gmane.org/group/gmane.linux.ports.arm.kernel/thread=253942
| | | * | | ARM: suspend: use hash of cpu_logical_map value to index into save arrayNicolas Pitre2013-07-302-18/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we hash the MPIDR of the CPU being suspended to determine which entry in the sleep_save_sp array to use. In some situations, such as when we want to resume on another physical CPU, the MPIDR of another CPU should be used instead. So let's use the value of cpu_logical_map(smp_processor_id()) in place of the MPIDR in the suspend path. This will result in the same index being used as with the previous code unless the caller has modified cpu_logical_map() beforehand with the MPIDR of the physical CPU the suspending logical CPU will resume on. Consequently, if doing a physical CPU migration, cpu_logical_map() must be updated appropriately somewhere between cpu_pm_enter() and cpu_suspend(). The register allocation in __cpu_suspend is reworked in order to better accommodate the additional argument. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com>
| * | | | | ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()Stephen Boyd2013-11-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we're running a kernel compiled with SMP_ON_UP=y and the hardware only supports UP operation there isn't any smp_cross_call function assigned. Unfortunately, we call smp_cross_call() unconditionally in arch_irq_work_raise() and crash the kernel on UP devices. Check to make sure we're running on an SMP device before calling smp_cross_call() here. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 80000005 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc6-00018-g8d45144-dirty #16 task: de05b440 ti: de05c000 task.ti: de05c000 PC is at 0x0 LR is at arch_irq_work_raise+0x3c/0x48 pc : [<00000000>] lr : [<c0019590>] psr: 60000193 sp : de05dd60 ip : 00000001 fp : 00000000 r10: c085e2f0 r9 : de05c000 r8 : c07be0a4 r7 : de05c000 r6 : de05c000 r5 : c07c5778 r4 : c0824554 r3 : 00000000 r2 : 00000000 r1 : 00000006 r0 : c0529a58 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000017 Process swapper/0 (pid: 1, stack limit = 0xde05c248) Stack: (0xde05dd60 to 0xde05e000) dd60: c07b9dbc c00cb2dc 00000001 c08242c0 c08242c0 60000113 c07be0a8 c00b0590 dd80: de05c000 c085e2f0 c08242c0 c08242c0 c1414c28 c00b07cc de05b440 c1414c28 dda0: c08242c0 c00b0af8 c0862bb0 c0862db0 c1414cd8 de05c028 c0824840 de05ddb8 ddc0: 00000000 00000009 00000001 00000024 c07be0a8 c07be0a4 de05c000 c085e2f0 dde0: 00000000 c004a4b0 00000010 de00d2dc 00000054 00000100 00000024 00000000 de00: de05c028 0000000a ffff8ae7 00200040 00000016 de05c000 60000193 de05c000 de20: 00000054 00000000 00000000 00000000 00000000 c004a704 00000000 de05c008 de40: c07ba254 c004aa1c c07c5778 c0014b70 fa200000 00000054 de05de80 c0861244 de60: 00000000 c0008634 de05b440 c051c778 20000113 ffffffff de05deb4 c051d0a4 de80: 00000001 00000001 00000000 de05b440 c082afac de057ac0 de057ac0 de0443c0 dea0: 00000000 00000000 00000000 00000000 c082afbc de05dec8 c009f2a0 c051c778 dec0: 20000113 ffffffff 00000000 c016edb0 00000000 000002b0 de057ac0 de057ac0 dee0: 00000000 c016ee40 c0875e50 de05df2e de057ac0 00000000 00000013 00000000 df00: 00000000 c016f054 de043600 de0443c0 c008eb38 de004ec0 c0875e50 c008eb44 df20: 00000012 00000000 00000000 3931f0f8 00000000 00000000 00000014 c0822e84 df40: 00000000 c008ed2c 00000000 00000000 00000000 c07b7490 c07b7490 c075ab3c df60: 00000000 c00701ac 00000002 00000000 c0070160 dffadb73 7bf8edb4 00000000 df80: c051092c 00000000 00000000 00000000 00000000 00000000 00000000 c0510934 dfa0: de05aa40 00000000 c051092c c0013ce8 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 07efffe5 4dfac6f5 [<c0019590>] (arch_irq_work_raise+0x3c/0x48) from [<c00cb2dc>] (irq_work_queue+0xe4/0xf8) [<c00cb2dc>] (irq_work_queue+0xe4/0xf8) from [<c00b0590>] (rcu_accelerate_cbs+0x1d4/0x1d8) [<c00b0590>] (rcu_accelerate_cbs+0x1d4/0x1d8) from [<c00b07cc>] (rcu_start_gp+0x34/0x48) [<c00b07cc>] (rcu_start_gp+0x34/0x48) from [<c00b0af8>] (rcu_process_callbacks+0x318/0x608) [<c00b0af8>] (rcu_process_callbacks+0x318/0x608) from [<c004a4b0>] (__do_softirq+0x114/0x2a0) [<c004a4b0>] (__do_softirq+0x114/0x2a0) from [<c004a704>] (do_softirq+0x6c/0x74) [<c004a704>] (do_softirq+0x6c/0x74) from [<c004aa1c>] (irq_exit+0xac/0x100) [<c004aa1c>] (irq_exit+0xac/0x100) from [<c0014b70>] (handle_IRQ+0x54/0xb4) [<c0014b70>] (handle_IRQ+0x54/0xb4) from [<c0008634>] (omap3_intc_handle_irq+0x60/0x74) [<c0008634>] (omap3_intc_handle_irq+0x60/0x74) from [<c051d0a4>] (__irq_svc+0x44/0x5c) Exception stack(0xde05de80 to 0xde05dec8) de80: 00000001 00000001 00000000 de05b440 c082afac de057ac0 de057ac0 de0443c0 dea0: 00000000 00000000 00000000 00000000 c082afbc de05dec8 c009f2a0 c051c778 dec0: 20000113 ffffffff [<c051d0a4>] (__irq_svc+0x44/0x5c) from [<c051c778>] (_raw_spin_unlock_irq+0x28/0x2c) [<c051c778>] (_raw_spin_unlock_irq+0x28/0x2c) from [<c016edb0>] (proc_alloc_inum+0x30/0xa8) [<c016edb0>] (proc_alloc_inum+0x30/0xa8) from [<c016ee40>] (proc_register+0x18/0x130) [<c016ee40>] (proc_register+0x18/0x130) from [<c016f054>] (proc_mkdir_data+0x44/0x6c) [<c016f054>] (proc_mkdir_data+0x44/0x6c) from [<c008eb44>] (register_irq_proc+0x6c/0x128) [<c008eb44>] (register_irq_proc+0x6c/0x128) from [<c008ed2c>] (init_irq_proc+0x74/0xb0) [<c008ed2c>] (init_irq_proc+0x74/0xb0) from [<c075ab3c>] (kernel_init_freeable+0x84/0x1c8) [<c075ab3c>] (kernel_init_freeable+0x84/0x1c8) from [<c0510934>] (kernel_init+0x8/0x150) [<c0510934>] (kernel_init+0x8/0x150) from [<c0013ce8>] (ret_from_fork+0x14/0x2c) Code: bad PC value Fixes: bf18525fd79 "ARM: 7872/1: Support arch_irq_work_raise() via self IPIs" Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 7872/1: Support arch_irq_work_raise() via self IPIsStephen Boyd2013-11-071-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By default, IRQ work is run from the tick interrupt (see irq_work_run() in update_process_times()). When we're in full NOHZ mode, restarting the tick requires the use of IRQ work and if the only place we run IRQ work is in the tick interrupt we have an unbreakable cycle. Implement arch_irq_work_raise() via self IPIs to break this cycle and get the tick started again. Note that we implement this via IPIs which are only available on SMP builds. This shouldn't be a problem because full NOHZ is only supported on SMP builds anyway. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_tMagnus Damm2013-10-291-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_ARCH_PHYS_ADDR_T_64BIT to determine if ignoring or truncating of memory banks is neccessary. This may be needed in the case of 64-bit memory bank addresses but when phys_addr_t is kept 32-bit. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 7863/1: Let arm_add_memory() always use 64-bit argumentsMagnus Damm2013-10-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DTB and/or the kernel command line may pass 64-bit addresses regardless of kernel configuration, so update arm_add_memory() to take 64-bit arguments independently of the phys_addr_t size. This allows non-wrapping handling of high memory banks such as the second memory bank of APE6EVM (at 0x2_0000_0000) in case of 32-bit phys_addr_t. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 7862/1: pcpu: replace __get_cpu_var_usesChristoph Lameter2013-10-293-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the ARM part of Christoph's patchset cleaning up the various uses of __get_cpu_var across the tree. The idea is to convert __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and fewer registers are used when code is generated. [will: fixed debug ref counting checks and pcpu array accesses] Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 7855/1: Add check for Cortex-A15 errata 798181 ECORob Herring2013-10-292-2/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The work-around for A15 errata 798181 is not needed if appropriate ECO fixes have been applied to r3p2 and earlier core revisions. This can be checked by reading REVIDR register bits 4 and 9. If only bit 4 is set, then the IPI broadcast can be skipped. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | | mm/arch: use NUMA_NO_NODEJianguo Wu2013-11-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use more appropriate NUMA_NO_NODE instead of -1 in all archs' module_alloc() Signed-off-by: Jianguo Wu <wujianguo@huawei.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds2013-11-121-37/+20
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
| * | | | | | arm: use common of_flat_dt_match_machineRob Herring2013-10-091-22/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert arm to use the common of_flat_dt_match_machine function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org
| * | | | | | arm: use early_init_dt_scanRob Herring2013-10-091-15/+1
| | |_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert arm to use new early_init_dt_scan function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org
* | | | | | Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2013-11-122-14/+1
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Ingo Molnar: "Main changes in this cycle were: - Updated full dynticks support. - Event stream support for architected (ARM) timers. - ARM clocksource driver updates. - Move arm64 to using the generic sched_clock framework & resulting cleanup in the generic sched_clock code. - Misc fixes and cleanups" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) x86/time: Honor ACPI FADT flag indicating absence of a CMOS RTC clocksource: sun4i: remove IRQF_DISABLED clocksource: sun4i: Report the minimum tick that we can program clocksource: sun4i: Select CLKSRC_MMIO clocksource: Provide timekeeping for efm32 SoCs clocksource: em_sti: convert to clk_prepare/unprepare time: Fix signedness bug in sysfs_get_uname() and its callers timekeeping: Fix some trivial typos in comments alarmtimer: return EINVAL instead of ENOTSUPP if rtcdev doesn't exist clocksource: arch_timer: Do not register arch_sys_counter twice timer stats: Add a 'Collection: active/inactive' line to timer usage statistics sched_clock: Remove sched_clock_func() hook arch_timer: Move to generic sched_clock framework clocksource: tcb_clksrc: Remove IRQF_DISABLED clocksource: tcb_clksrc: Improve driver robustness clocksource: tcb_clksrc: Replace clk_enable/disable with clk_prepare_enable/disable_unprepare clocksource: arm_arch_timer: Use clocksource for suspend timekeeping clocksource: dw_apb_timer_of: Mark a few more functions as __init clocksource: Put nodes passed to CLOCKSOURCE_OF_DECLARE callbacks centrally arm: zynq: Enable arm_global_timer ...
| * \ \ \ \ \ Merge branch 'fortglx/3.13/time' of ↵Ingo Molnar2013-10-101-14/+0
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/jstultz/linux into timers/core Pull more timekeeping items for v3.13 from John Stultz: * Small cleanup in the clocksource code. * Fix for rtc-pl031 to let it work with alarmtimers. * Move arm64 to using the generic sched_clock framework & resulting cleanup in the generic sched_clock code. Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * | | | | | arch_timer: Move to generic sched_clock frameworkStephen Boyd2013-10-091-14/+0
| | | |_|/ / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Register with the generic sched_clock framework now that it supports 64 bits. This fixes two problems with the current sched_clock support for machines using the architected timers. First off, we don't subtract the start value from subsequent sched_clock calls so we can potentially start off with sched_clock returning gigantic numbers. Second, there is no support for suspend/resume handling so problems such as discussed in 6a4dae5 (ARM: 7565/1: sched: stop sched_clock() during suspend, 2012-10-23) can happen without this patch. Finally, it allows us to move the sched_clock setup into drivers clocksource out of the arch ports. Cc: Christopher Covington <cov@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
| * | | | | | Merge branch 'timer_evtstrm' of git://linux-arm.org/linux-skn into ↵Daniel Lezcano2013-10-031-0/+1
| |\ \ \ \ \ \ | | |_|/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clockevents/3.13 Adds support to configure the rate and enable the event stream for architected timer. The event streams can be used to impose a timeout on a wfe, to safeguard against any programming error in case an expected event is not generated or even to implement wfe-based timeouts for userspace locking implementations. This feature can be disabled(enabled by default). Since the timer control register is reset to zero on warm boot, CPU PM notifier is added to save and restore the value. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
| | * | | | | ARM: arch_timer: add support to configure and enable event streamSudeep KarkadaNagesha2013-09-261-0/+1
| | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for configuring the event stream frequency and enabling it. It also adds the hwcaps definitions to the user to detect this event stream feature. Cc: Russell King <linux@arm.linux.org.uk> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
* | | | | | Merge tag 'soc-for-linus' of ↵Linus Torvalds2013-11-111-1/+0
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Among the things new for this release are: - More support for the AM33xx platforms from TI - Tegra 124 support, and some updates to older tegra families as well - imx cleanups and updates across the board - A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM, and turned out to be too broad a name. New name is ARCH_BCM_MOBILE. - A whole bunch of updates and fixes for integrator, making the platform code more modern and switches over to DT-only booting. - Support for two new Renesas shmobile chipsets. Next up for them is more work on consolidation instead of introduction of new non-multiplatform SoCs, we're all looking forward to that! - Misc cleanups for older Samsung platforms, some Allwinner updates, etc" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits) ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config ARM: bcm_defconfig: Run "make savedefconfig" ARM: bcm281xx: Add ARCH Timers to config rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) ARM: vexpress: Enable platform-specific options in defconfig ARM: vexpress: Make defconfig work again ARM: sunxi: remove .init_time hooks ARM: imx: enable suspend for imx6sl ARM: imx: ensure dsm_request signal is not asserted when setting LPM ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter() ARM: imx6q: move low-power code out of clock driver ARM: imx: drop extern with function prototypes in common.h ARM: imx: reset core along with enable/disable operation ARM: imx: do not return from imx_cpu_die() call ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO ARM: imx: replace imx6q_restart() with mxc_restart() ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt ...
| * \ \ \ \ \ Merge branch 'cleanup/dt-clock' into next/socOlof Johansson2013-10-281-12/+17
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merging in dt clock cleanup as a pre-req with some of the later SoC branches. There are a handful of conflicts here -- some of the already merged SoC branches should have been based on the cleanup but weren't. In particular, a remove/add of include on highbank and two remove/remove conflicts on kirkwood were fixed up. * cleanup/dt-clock: (28 commits) ARM: vt8500: remove custom .init_time hook ARM: vexpress: remove custom .init_time hook ARM: tegra: remove custom .init_time hook ARM: sunxi: remove custom .init_time hook ARM: sti: remove custom .init_time hook ARM: socfpga: remove custom .init_time hook ARM: rockchip: remove custom .init_time hook ARM: prima2: remove custom .init_time hook ARM: nspire: remove custom .init_time hook ARM: nomadik: remove custom .init_time hook ARM: mxs: remove custom .init_time hook ARM: kirkwood: remove custom .init_time hook ARM: imx: remove custom .init_time hook ARM: highbank: remove custom .init_time hook ARM: exynos: remove custom .init_time hook ARM: dove: remove custom .init_time hook ARM: bcm2835: remove custom .init_time hook ARM: bcm: provide common arch init for DT clocks ARM: call of_clk_init from default time_init handler ARM: vt8500: prepare for arch-wide .init_time callback ... Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | | | | ARM: PSCI: remove unnecessary include of arm-gic.hRob Herring2013-10-011-1/+0
| | |/ / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that gic_secondary_init is no longer needed to be called by SMP init functions, the header is not needed. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
* | | | | | | Merge tag 'cleanup-for-linus' of ↵Linus Torvalds2013-11-111-12/+17
|\ \ \ \ \ \ \ | |_|_|_|/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.13. Qualcomm msm targets had a bunch of code removal for legacy non-DT platforms. Nomadik saw more device tree conversions and cleanup of old code. Tegra has some code refactoring, etc. One longish patch series from Sebastian Hasselbarth changes the init_time hooks and tries to use a generic implementation for most platforms, since they were all doing more or less the same things. Finally the "shark" platform is removed in this release. It's been abandoned for a while and nobody seems to care enough to keep it around. If someone comes along and wants to resurrect it, the removal can easily be reverted and code brought back. Beyond this, mostly a bunch of removals of stale content across the board, etc" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (79 commits) ARM: gemini: convert to GENERIC_CLOCKEVENTS ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4, 5]_DT config options ARM: OMAP3: control: add API for setting IVA bootmode ARM: OMAP3: CM/control: move CM scratchpad save to CM driver ARM: OMAP3: McBSP: do not access CM register directly ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock ARM: OMAP2: CM/PM: remove direct register accesses outside CM code MAINTAINERS: Add patterns for DTS files for AT91 ARM: at91: remove init_machine() as default is suitable ARM: at91/dt: split sama5d3 peripheral definitions ARM: at91/dt: split sam9x5 peripheral definitions ARM: Remove temporary sched_clock.h header ARM: clps711x: Use linux/sched_clock.h MAINTAINERS: Add DTS files to patterns for Samsung platform ARM: EXYNOS: remove unnecessary header inclusions from exynos4/5 dt machine file ARM: tegra: fix ARCH_TEGRA_114_SOC select sort order clk: nomadik: fix missing __init on nomadik_src_init ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP ARM: S3C64XX: Kill CONFIG_PLAT_S3C64XX ASoC: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64XX support ...
| * | | | | | Merge tag 'omap-for-v3.13/cm-scm-cleanup-signed' of ↵Olof Johansson2013-10-282-6/+6
| |\ \ \ \ \ \ | | |/ / / / / | | | / / / / | | |/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Paul Walmsley <paul@pwsan.com> via Tony Lindgren: Move some of the OMAP2+ CM and System Control Module direct register accesses into CM- and System Control Module-specific "drivers" underneath arch/arm/mach-omap2/. This is a prerequisite for moving this code out of arch/arm/mach-omap2/ into drivers/. Basic test logs are available here: http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/20131019101809/ * tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP3: control: add API for setting IVA bootmode ARM: OMAP3: CM/control: move CM scratchpad save to CM driver ARM: OMAP3: McBSP: do not access CM register directly ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock ARM: OMAP2: CM/PM: remove direct register accesses outside CM code + Linux 3.12-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
OpenPOWER on IntegriCloud