summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/omap34xx.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: omap3: Add cpu_thermal zoneKeerthy2017-03-241-2/+6
| | | | | | | Add cpu_thermal zone. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: Add #pinctrl-cells for pinctrl-single instancesTony Lindgren2016-11-071-0/+1
| | | | | | | | | | | | | Drivers using pinctrl-single,pins have #pinctrl-cells = <1>, while pinctrl-single,bits need #pinctrl-cells = <2>. Note that this patch can be optionally applied separately from the driver changes as the driver supports also the legacy binding without #pinctrl-cells. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: omap3/am4372: add missing unit name to ocp nodeJavier Martinez Canillas2016-08-151-1/+1
| | | | | | | | | This patch fixes the following DTC warnings for many boards: "Node /ocp has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2016-05-181-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "These are all the updates to device tree files for 32-bit platforms, which as usual makes up the bulk of the ARM SoC changes: 462 non-merge changesets, 450 files changed, 23340 insertions, 5216 deletions. The three platforms that are added with the "soc" branch are here as well, and we add some related machine files: - For Aspeed AST2400/AST2500, we get the evaluation platform and the Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC - For Oxnas 810SE, the Western Digital "My Book World Edition" is added as the only platform at the moment. - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are supported On the ARM Realview development platform, we now support all machines with device tree, previously only the board files were supported, which in turn will likely be removed soon. Qualcomm IPQ4019 is the second generation ARM based "Internet Processor", following the IPQ806x that is used in many high-end WiFi routers. This one integrates two ath10k wifi radios that were previously on separate chips. Other boards that got added for existing chips are: Ti OMAP family: - Amazon Kindle Fire, first generation, tablet and ebook reader - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM development systems Samsung EXYNOS platform: - Samsung ARTIK5 evaluation board, see https://www.artik.io/modules/overview/artik-5/ NXP i.MX platforms: - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx, TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial SoM modules - Embest MarS Board i.MX6Dual DIY platform - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX Nitrogen6sx embedded boards - Technexion Pico i.MX6UL compute module - ZII VF610 Development Board Marvell embedded (mvebu, orion, kirkwood) platforms: - Linksys Viper (E4200v2 / EA4500) WiFi router - Buffalo Kurobox Pro NAS Qualcomm Snapdragon: - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600 Rockchips platform: - mqmaker MiQi single-board computer Altera SoCFPGA: - samtec VIN|ING 1000 vehicle communication interface Allwinner Sunxi platforms: - Dserve DSRV9703C tablet - Difrnce DIT4350 tablet - Colorfly E708 Q1 tablet - Polaroid MID2809PXE04 tablet - Olimex A20 OLinuXino LIME2 single board computer - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board computers Across many platforms, bug fixes went in to address warnings that dtc now emits with 'make dtbs W=1'. Further changes for device enablement went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM Versatile Express" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits) ARM: dts: tango4: Import watchdog node ARM: dts: tango4: Update cpus node for cpufreq ARM: dts: tango4: Update DT to match clk driver ARM: dts: tango4: Initial thermal support arm/dst: Add Aspeed ast2500 device tree arm/dts: Add Aspeed ast2400 device tree ARM: sun7i: dt: Add pll3 and pll7 clocks ARM: dts: sunxi: Add a olinuxino-lime2-emmc ARM: dts: at91: sama5d4: add trng node ARM: dts: at91: sama5d3: add trng node ARM: dts: at91: sama5d2: add trng node ARM: dts: at91: at91sam9g45 family: reduce the trng register map size ARM: sun4i: dt: Add pll3 and pll7 clocks ARM: sun5i: chip: Enable the TV Encoder ARM: sun5i: r8: Add display blocks to the DTSI ARM: sun5i: a13: Add display and TCON clocks ARM: dts: ux500: configure the accelerometers open drain ARM: mx5: dts: Enable USB OTG on M53EVK ARM: dts: imx6ul-14x14-evk: Add audio support ARM: dts: imx6qdl: Remove unneeded unit-addresses ...
| * ARM: dts: omap: add missing unit names to bandgap nodesJavier Martinez Canillas2016-04-111-1/+1
| | | | | | | | | | | | | | | | | | This patch fixes the following DTC warnings: "bandgap has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: omap3: Fix ISP syscon register offsetIvaylo Dimitrov2016-04-261-1/+1
|/ | | | | | | | According to the TRM, SCM CONTROL_CSIRXFE register is on offset 0x6c Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Reviewed-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: omap3: Include missing bandgap data for ti-soc-thermal driverPali Rohár2016-01-271-0/+6
| | | | | | | | | | Driver for omap3 with documentation is there since v4.4-rc1. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Pavel Machek <pavel@ucw.cz> [tony@atomide.com: added thermal-sensor-cells as suggested by Roger] Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'omap/dt' into next/lateArnd Bergmann2015-04-151-0/+17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As pointed out by Stephen Rothwell, commit e52117638b79 ("ARM: dts: omap3: Add DT entries for OMAP 3 ISP") conflicts with b8845074cfbb ("ARM: dts: omap3: add minimal l4 bus layout with control module support") in non-obvious ways, causing a build failure when both patches are present. This merges the two branches that introduce the respective changes into the next/late branch to resolve the way that Stephen suggested, as confirmed by Tony. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.org/lkml/2015/4/6/436 Acked-by: Tony Lindgren <tony@atomide.com>
| * ARM: dts: omap3: Add DT entries for OMAP 3 ISPSakari Ailus2015-03-191-0/+17
|/ | | | | | | | | | The resources the ISP needs are slightly different on 3[45]xx and 3[67]xx. Especially the phy-type property is different. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [tony@atomide.com: use omap3_scm_general instead of scm_conf for now] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: omap3-n900: Add SSI supportSebastian Reichel2014-05-271-0/+11
| | | | | | | | | Add SSI device tree data for OMAP3 and Nokia N900. Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'clk-for-linus-3.14-part2' of ↵Linus Torvalds2014-01-281-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/mike.turquette/linux Pull more clock framework changes from Mike Turquette: "The second half of the clock framework pull requeust for 3.14 is dominated by platform support for Qualcomm's MSM SoCs, DT binding updates for TI's OMAP-ish processors and additional support for Samsung chips. Additionally there are other smaller clock driver changes and several last minute fixes. This pull request also includes the HiSilicon support that depends on the already-merged arm-soc pull request" [ Fix up stupid compile error in the source tree with evil merge - Grumpy Linus ] * tag 'clk-for-linus-3.14-part2' of git://git.linaro.org/people/mike.turquette/linux: (49 commits) clk: sort Makefile clk: sunxi: fix overflow when setting up divided factors clk: Export more clk-provider functions dt-bindings: qcom: Fix warning with duplicate dt define clk: si5351: remove variant from platform_data clk: samsung: Remove unneeded semicolon clk: qcom: Fix modular build ARM: OMAP3: use DT clock init if DT data is available ARM: AM33xx: remove old clock data and link in new clock init code ARM: AM43xx: Enable clock init ARM: OMAP: DRA7: Enable clock init ARM: OMAP4: remove old clock data and link in new clock init code ARM: OMAP2+: io: use new clock init API ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT ARM: OMAP3: hwmod: initialize clkdm from clkdm_name ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm ARM: OMAP2+: clock: use driver API instead of direct memory read/write ARM: OMAP2+: clock: add support for indexed memmaps ARM: dts: am43xx clock data ARM: dts: AM35xx: use DT clock data ...
| * ARM: dts: omap3 clock dataTero Kristo2014-01-171-0/+4
| | | | | | | | | | | | | | | | | | This patch creates a unique node for each clock in the OMAP3 power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* | ARM: dts: Split omap3 pinmux core deviceLaurent Pinchart2014-01-071-0/+13
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | The omap3_pmx_core pinmux device in the device tree handles the system controller module (SCM) PADCONFS fonction. Its control registers are split in two distinct areas, with other SCM registers in-between. Those other registers can't thus be requested by other drivers as the memory region gets reserved by the pinmux driver. Split the omap3_pmx_core device tree node in two for the two memory regions. The second region address and size depends on the SoC model. The change in omap3.dtsi fixes an "external abort on non-linefetch" when doing cat /sys/kernel/debug/pinctrl/.../pins on a Nokia N900. Note that the core2 padconf region is different for 3430 vs 3630, and does not exist on 3517 as noted by Nishanth Menon <nm@ti.com>. Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-By: Sebastian Reichel <sre@debian.org> Signed-off-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: updated for 3430 vs 3630 core2 based on Nishant's patch] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: OMAP2+: Use #include for all device treesFlorian Vaussard2013-06-181-1/+1
| | | | | | | | | | Replace /include/ by #include for OMAP2+ DT, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP34xx/35xx: Add CPU OPP tableNishanth Menon2013-04-091-0/+28
Add DT OPP table for OMAP34xx/35xx family of devices. This data is decoded by OF with of_init_opp_table() helper function. OPP data here is based on existing opp3xxx_data.c Since the omap36xx OPP tables would be different from OMAP34xx/35xx, introduce an new omap34xx.dtsi for 34xx/35xx specific entries and use existing omap3.dtsi as the common dtsi file for all OMAP3 platforms. This is in preparation to use generic cpufreq-cpu0 driver for device tree enabled boot. Legacy non device tree enabled boot continues to use omap-cpufreq.c and opp3xxx_data.c. Signed-off-by: Nishanth Menon <nm@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jon Hunter <jon-hunter@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
OpenPOWER on IntegriCloud