summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/kirkwood.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: kirkwood: Add i2c alias so setting bus numberAndrew Lunn2014-03-041-1/+2
| | | | | | | | | | | | | When using platform_driver instantiation, the i2c bus was given bus number 0. The kirkwood-t5325 audio driver has this bus number hard coded for the address of the codec. However by default device tree i2c busses are dynamically allocated a bus number, starting from 1. Thus the kirkwood-t5325 cannot find its audio codec. By adding an alias in the DT file we can control the bus number and set it to 0. The codec can then be found. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: Add audio node to kirkwood.dtsiAndrew Lunn2014-03-041-0/+9
| | | | | | | | The binding has existed for a while, so add the missing node so it can be used by devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: Instantiate system controller in kirkwood.dtsiAndrew Lunn2014-03-041-0/+5
| | | | | | | | | | Make use of the mvebu system controller, by placing a node into the dtsi file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: Instantiate L2 cache from DT.Andrew Lunn2014-03-041-0/+5
| | | | | | | | | Now that the Feroceon L2 cache has a DT binding, make use of it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: Add RSTOUT 'reg' entry to devicetreeEzequiel Garcia2014-02-171-1/+1
| | | | | | | | | | In order to support multiplatform builds the watchdog devicetree binding was modified and now the 'reg' property is specified to need two entries. This commit adds the second entry as-per the new specification. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'devicetree-for-3.14' of ↵Linus Torvalds2014-01-241-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add new documents with guidelines for DT binding stability and review process. This is one of the outcomes of Kernel Summit DT discussions - Remove a bunch of device_type usage which is only for OF and deprecated with FDT - Fix a long standing issue with compatible string match ordering - Various minor binding documentation updates * tag 'devicetree-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: add rockchip vendor prefix serial: vt8500: Add missing binding document for arch-vt8500 serial driver. dt/bindings: submitting patches and ABI documents DT: Add vendor prefix for Emerging Display Technologies of: add vendor prefixe for EPFL of: add vendor prefix for Gumstix of: add vendor prefix for Ka-Ro electronics GmbH devicetree: macb: Document clock properties dts: bindings: trivial clock bindings doc fixes of: Fix __of_device_is_available check dt/bindings: Remove device_type "serial" from marvell,mv64360-mpsc dt/bindings: remove device_type "network" references dt/bindings: remove users of device_type "mdio" dt/bindings: Remove references to linux,phandle properties dt/bindings: Remove all references to device_type "ethernet-phy" of: irq: Ignore disabled intc's when searching map of: irq: Ignore disabled interrupt controllers OF: base: match each node compatible against all given matches first dt-bindings: add GIC-400 binding
| * dt/bindings: remove device_type "network" referencesGrant Likely2014-01-161-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | device_type is deprecated and the kernel doesn't require it in most cases. The only exceptions for flat tree users are the "gianfar", "ucc_geth" and "ibm,emac" bindings, and arguably that requirement could be relaxed for ucc_geth and ibm,emac (that is a task for separate patches though). This patch removes references to device_type="network" from the binding documentation where possible and removes the properties from ARM and microblaze dts files. This patch does not modify the powerpc .dts files since there are a much larger number of them affected and I think the ucc_geth, ibm,emac and gianfar users should be addressed before clearing out the references to reduce the chance of breakage. Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Michal Simek <monstr@monstr.eu> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org>
* | Phy: Add DT nodes on kirkwood and Dove for the SATA PHYAndrew Lunn2013-12-221-0/+18
| | | | | | | | | | | | | | | | | | | | Add nodes for the two SATA PHYs on kirkwood. Add node for the one SATA PHY on Dove. Add pHandles to the PHYs in the sata nodes. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: kirkwood: sort dt nodes by addressJason Cooper2013-12-121-70/+70
| | | | | | | | | | | | This has caused merge conflicts in the past. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: DT: Kirkwood: Use symbolic names from gpio.hAndrew Lunn2013-12-081-0/+1
| | | | | | | | | | | | | | Use GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW instead of 0 and 1. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: DT: Kirkwood: Use symbolic names from input.hAndrew Lunn2013-12-081-0/+1
|/ | | | | | | | Replace the numeric key value with a symbolic name from <bt-bindings/input/input.h> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'omap-for-v3.13/quirk-signed' of ↵Kevin Hilman2013-10-141-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren: Changes needed to prepare for making omap3 device tree only: - Always build in board-generic, and add pdata quirks and auxdata support for it so we have all the pdata related quirks in the same place. - Merge of the drivers/pinctrl changes that are needed for PM to continue working on omap3 and also needed for other omaps eventually. The three pinctrl related patches have been acked by Linus Walleij and are pulled into both the pinctrl tree and this branch. - Few defconfig related changes for drivers needed. * tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (523 commits) ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it ARM: OMAP2+: Add minimal 8250 support for GPMC ARM: OMAP2+: Use pdata quirks for wl12xx for omap3 evm and zoom3 ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap ARM: OMAP2+: Add support for auxdata pinctrl: single: Add support for auxdata pinctrl: single: Add support for wake-up interrupts pinctrl: single: Prepare for supporting SoC specific features ARM: OMAP2+: igep0020: use display init from dss-common ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board +Linux 3.12-rc4 Signed-off-by: Kevin Hilman <khilman@linaro.org>
| * ARM: kirkwood: Fix address of second XOR engineQuentin Armitage2013-09-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There appears to be an error in the second address of the second XOR engine in the Kirkwood SoC device tree, which is specified as 0xd0b00 but should be 0x60b00. For confirmation of address see table 581 page 658 of: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf Also see definition of XOR1_HIGH_PHYS_BASE in arch/arm/mach-kirkwood/include/mach/kirkwood.h Signed-off-by: Quentin Armitage <quentin@armitage.org.uk> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * ARM: Kirkwood: Add missing DT reg property to cpu@0Andrew Lunn2013-09-181-0/+1
| | | | | | | | | | | | | | | | | | The kirkwood.dtsi cpu@0 node is missing the mandatory reg property. This causes of_get_cpu_node() to fail to find the node and as a result the cpufreq driver fails in its probe function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: kirkwood: Move the nand node under the mbus nodeJason Gunthorpe2013-10-011-16/+15
| | | | | | | | | | | | | | | | | | | | | | There should be no nodes that are not children of the mbus. Move the nand node under the mbus, and rework the board .dts files to use an & reference to the nand node. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: kirkwood: Move the crypto node under the mbus nodeJason Gunthorpe2013-10-011-12/+11
| | | | | | | | | | | | | | | | There should be no nodes that are not children of the mbus. Move the crypto node under the mbus. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT bindingJason Gunthorpe2013-10-011-0/+5
|/ | | | | | | | | | | | | | | | | | | kirkwood_setup_wins is the last manual caller of mbus in kirkwood, don't call it for DT boards and rely on the DT having a mbus node with a proper ranges property to setup these windows. Move all the mbus ranges properties for all boards into kirkwood.dtsi, since they are currently all the same. This makes the DT self consistent, since the physical address of the NAND and CRYPTO are both referenced internally. The arbitary Linux constants KIRKWOOD_NAND_MEM_PHYS_BASE and KIRKWOOD_SRAM_PHYS_BASE no longer have to match the DT values. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'boards-for-linus' of ↵Linus Torvalds2013-09-061-8/+79
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board updates from Olof Johansson: "Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches, but most of this is around legacy code and board support. We've found that platform maintainers have a hard time separating all of these out and might move towards fewer branches for next release. - Removal of a number of Marvell Kirkwood board files, since contents is now common and mostly configured via DT. - Device-tree updates for Marvell Dove, including irqchip and clocksource setup. - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager. - New backlight drivers for backlights used on Renesas shmobile platforms. - Removal of Renesas leds driver. - Shuffling of some of the new Broadcom platforms to give room for others in the same mach directory. More in 3.13" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion ARM: bcm: Make secure API call optional ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers) ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona ARM: bcm: Rename board_bcm mmc: sdhci-bcm-kona: make linker-section warning go away ARM: tegra: defconfig updates ARM: dove: add initial DT file for Globalscale D2Plug ARM: dove: add GPIO IR receiver node to SolidRun CuBox ARM: dove: add common pinmux functions to DT ARM: dove: add cpu device tree node ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument ARM: kirkwood: fix DT building and update defconfig ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code ARM: configs: disable DEBUG_LL in bcm_defconfig ARM: bcm281xx: Board specific reboot code ARM bcm281xx: Turn on socket & network support. ARM: bcm281xx: Turn on L2 cache. ...
| * ARM: kirkwood: move device tree nodes to DT irqchip and clocksourceSebastian Hesselbarth2013-07-251-8/+27
| | | | | | | | | | | | | | | | With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodesSebastian Hesselbarth2013-07-251-0/+52
| | | | | | | | | | | | | | | | | | This patch adds mv643xx_eth and mvmdio device tree nodes for DT enabled Kirkwood boards. Phy nodes are also added with reg property set on a per-board basis. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: kirkwood: Relocate PCIe device tree nodesEzequiel Garcia2013-08-061-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that mbus has been added to the device tree, it's possible to move the PCIe nodes out of the ocp node, placing it directly below the mbus. This is a more accurate representation of the hardware. Moving the PCIe nodes, we now need to introduce an extra cell to encode the window target ID and attribute. Since this depends on the PCIe port, we split the ranges translation entries, to correspond to each MBus window. In addition, we encode the PCIe memory and I/O apertures in the MBus node, according to the MBus DT binding specification. The choice made is 0xe0000000-0xf0000000 for memory space, and 0xf200000-0xf2100000 for I/O space. These apertures can be changed in each per-board DT file. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: kirkwood: Introduce MBUS_IDEzequiel Garcia2013-08-061-0/+2
| | | | | | | | | | | | | | | | | | | | This macro is used to define window's target ID and attribute cells for the MBus ranges entries. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: kirkwood: Introduce MBus DT nodeEzequiel Garcia2013-08-061-0/+10
|/ | | | | | | | | | Add a minimal MBus node, just to allow the MBus driver to probe. Follow-up patches will migrate the rest of the nodes appropriately. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'dt-for-linus' of ↵Linus Torvalds2013-07-021-26/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree changes from Arnd Bergmann: "These changes from 30 individual branches for the most part update device tree files, but there are also a few source code changes that have crept in this time, usually in order to atomically move over a driver from using hardcoded data to DT probing. A number of platforms change their DT files to use the C preprocessor, which is causing a bit of churn, but that is hopefully only this once" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits) ARM: at91: dt: rm9200ek: add spi support ARM: at91: dt: rm9200: add spi support ARM: at91/DT: at91sam9n12: add SPI DMA client infos ARM: at91/DT: sama5d3: add SPI DMA client infos ARM: at91/DT: fix SPI compatibility string ARM: Kirkwood: Fix the internal register ranges translation ARM: dts: bcm281xx: change comment to C89 style ARM: mmc: bcm281xx SDHCI driver (dt mods) ARM: nomadik: add the new clocks to the device tree clk: nomadik: implement the Nomadik clocks properly ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support arm: mvebu: enable mini-PCIe connectors on Armada 370 RD ARM: shmobile: irqpin: add a DT property to enable masking on parent ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ...
| * ARM: Kirkwood: Fix the internal register ranges translationEzequiel Garcia2013-06-211-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although the internal register window size is 1 MiB, the previous ranges translation for the internal register space had a size of 0x4000000. This was done to allow the crypto and nand node to access the corresponding 'sram' and 'nand' decoding windows. In order to describe the hardware more accurately, we declare the real 1 MiB internal register space in the ranges, and add a translation entry for the nand node to access the 'nand' window. This commit will make future improvements on the MBus DT binding easier. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * ARM: Kirkwood add cpus definition needed by cpufreq driver to dtsiAdam Baker2013-06-031-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kirkwood CPU Freq driver needs a CPU definition in order for the probe routine to activate it. Add a suitable definition to kirkwood.dtsi This definition is only correct for single core SoCs. There is a dual core SoC in the kirkwood family (88F632X) but the rest of the Kirkwood drivers in the kernel don't currently support it. If they ever do the cpus definition would need to be duplicated in each of the SoC specific include files. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * ARM: kirkwood: refactor dtsi to largest common nodesValentin Longchamp2013-05-271-28/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some kirkwood variants (for instance present in the prestera SoCs) do not have all the peripherals whose nodes are declared in kirkwood.dtsi. These missing peripherals are SATA, SDIO, and RTC. As discussed in [1], to avoid that these missing peripherals get initialized which could result in system hangs when accessing undocumented/not present HW registers, their corresponding OF nodes should not get declared at all for some kirkwood variants. The corresponding OF nodes of these peripherals thus are moved from kirkwood.dtsi to the kirkwood-628x.dtsi files so that they still are initialized for these variants where they are present. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-May/167154.html Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * ARM: mvebu: Use standard MMC binding for all users of mvsdioSimon Baatz2013-05-151-0/+4
| | | | | | | | | | | | | | | | | | In order to prepare the switch to the standard MMC device tree parser for mvsdio, adapt all current uses of mvsdio in the dts files to the standard format. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | arm: kirkwood: add SoC-level Device Tree data for PCIe interfacesThomas Petazzoni2013-05-271-0/+1
|/ | | | | | | | | | This commit adds Device Tree details to enable the PCIe interfaces on Kirkwood. The 6281 has one PCIe interface, the 6282 has two PCIe interfaces. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* rtc: rtc-mv: Add support for clk to avoid lockupsAndrew Lunn2013-03-081-0/+1
| | | | | | | | | | | | | The Marvell RTC on Kirkwood makes use of the runit clock. Ensure the driver clk_prepare_enable() this clock, otherwise there is a danger the SoC will lockup when accessing RTC registers with the clock disabled. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* gpio: mvebu: Add clk support to prevent lockupAndrew Lunn2013-03-081-0/+2
| | | | | | | | | | | | | | The kirkwood SoC GPIO cores use the runit clock. Add code to clk_prepare_enable() runit, otherwise there is a danger of locking up the SoC by accessing the GPIO registers when runit clock is not ticking. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: of_serial: fix clock gating by removing clock-frequencyJason Cooper2013-03-081-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* arm: kirkwood: add Device Tree informations for the SDIO controllerThomas Petazzoni2013-02-281-0/+8
| | | | | | | | Now that the SDIO controller has a Device Tree binding, let's use it in kirkwood.dtsi. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: fix missing #interrupt-cells propertySebastian Hesselbarth2013-01-231-0/+2
| | | | | | | | | The gpio controller on kirkwood can provide interrupts but is missing the #interrupt-cells property. This patch just adds it to both gpio controllers. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: Kirkwood: Fix missing clk for USB device.Andrew Lunn2013-01-061-0/+1
| | | | | | | | | Without the clock being held by a driver, it gets turned off at a bad time causing the SoC to lockup. This is often during reboot. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-12-141-0/+62
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC updates for Marvell mvebu/kirkwood from Olof Johansson: "This is a branch with updates for Marvell's mvebu/kirkwood platforms. They came in late-ish, and were heavily interdependent such that it didn't make sense to split them up across the cross-platform topic branches. So here they are (for the second release in a row) in a branch on their own." * tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (88 commits) arm: l2x0: add aurora related properties to OF binding arm: mvebu: add Aurora L2 Cache Controller to the DT arm: mvebu: add L2 cache support dma: mv_xor: fix error handling path dma: mv_xor: fix error checking of irq_of_parse_and_map() dma: mv_xor: use request_irq() instead of devm_request_irq() dma: mv_xor: clear the window override control registers arm: mvebu: fix address decoding armada_cfg_base() function ARM: mvebu: update defconfig with I2C and RTC support ARM: mvebu: Add SATA support for OpenBlocks AX3-4 ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4 ARM: mvebu: Add support for I2C on OpenBlocks AX3-4 ARM: mvebu: Add support for I2C controllers in Armada 370/XP arm: mvebu: Add hardware I/O Coherency support arm: plat-orion: Add coherency attribute when setup mbus target arm: dma mapping: Export a dma ops function arm_dma_set_mask arm: mvebu: Add SMP support for Armada XP arm: mm: Add support for PJ4B cpu and init routines arm: mvebu: Add IPI support via doorbells arm: mvebu: Add initial support for power managmement service unit ...
| * arm: kirkwood: Convert XOR instantiation to DT.Andrew Lunn2012-11-201-0/+40
| | | | | | | | | | | | | | | | Use DT to describe the two XOR DMA engines on Kirkwood. Remove the C code initialization. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
| * ARM: Kirkwood: switch to DT clock providersAndrew Lunn2012-11-201-0/+22
| | | | | | | | | | | | | | | | | | With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
* | ARM: Kirkwood: Make use of mvebu pincltl and gpio driversAndrew Lunn2012-11-241-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Select the generic mvebu kirkwood pincltr driver and generic mvebu gpio driver. This requires minor changes to the DT, and the calls to configure plat-orion gpio driver are removed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Jamie Lentin <jm@lentin.co.uk> Tested-by: Joshua Coombs <josh.coombs@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: Kirkwood: Convert all DT boards to EHCI via DT.Andrew Lunn2012-11-241-0/+7
|/ | | | | | | | | | Now that the EHCI driver has DT support, drop old style configuration of it and add DT in its place. Since all the boards enable the EHCI, enable it by default in kirkwood.dtsi. Any new boards which don't have USB can specifically disable it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Crypto: CESA: Add support for DT based instantiation.Andrew Lunn2012-09-221-1/+11
| | | | | | | | | | | | | | | Based on work by Michael Walle and Jason Cooper. Added support for getting the interrupt number and address of SRAM from DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Conflicts: arch/arm/mach-kirkwood/board-dt.c
* ATA: sata_mv: Add device tree supportAndrew Lunn2012-07-271-0/+7
| | | | | | | | | | Add support for instantiating this driver from device tree, and add the necassary DT information to the kirkwood.dtsi file. This is based on previous work by Michael Walle and Jason Cooper. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
* ARM: Orion: DTify the watchdog timer.Andrew Lunn2012-07-271-0/+6
| | | | | | | | | Add device tree support to the Orion watchdog timer, and enable its use in the kirkwood devices using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
* ARM: Orion: Add arch support needed for I2C via DT.Andrew Lunn2012-07-271-0/+10
| | | | | | | | | | | The MV64XXX I2C driver needs a clock in order to calculate the baud rate factors. So add an clk to the clk tree. Also add the base DT properties for kirkwood devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Conflicts: arch/arm/mach-kirkwood/common.c
* ARM: kirkwood: use devicetree for orion-spiMichael Walle2012-07-271-0/+10
| | | | | | | | | | Populate the devices with auxdata to set the device names which are used by clkdev to lookup the clocks. Signed-off-by: Michael Walle <micheal@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v2: Add interrupts properties, although not used.
* ARM: Orion: DT support for IRQ and GPIO ControllersAndrew Lunn2012-07-271-0/+27
| | | | | | | | | | | | | Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
* ARM: Kirkwood: Replace mrvl with marvellAndrew Lunn2012-07-251-3/+3
| | | | | | | It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
* kirkwood: Allow nand to be configured via. devicetreeJamie Lentin2012-05-151-1/+14
| | | | | | | | | Add default configuration for NAND, to be enabled in your board config. Ensure clock gating is set appropriately when the NAND is enabled. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: use devicetree for rtc-mvJason Cooper2012-03-161-0/+6
| | | | | Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
* ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0Jason Cooper2012-03-161-1/+25
| | | | | | | | | | | Define both uarts in kirkwood.dtsi as they are common to all kirkwood SoCs. Each board may enable all or none of them, so they are disabled by default. uart0 is enabled for the dreamplug. tclk can vary for each board, so we leave it undefined in the kirkwood dtsi. Each board can then set it as appropriate when enabling the uart. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
OpenPOWER on IntegriCloud