summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/k2hk-evm.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: keystone-evm: add 1g ethernet phys nodesGrygorii Strashko2014-07-171-0/+12
| | | | | | | | | | | | Keystone EVMK2HX has two 1G Marvell 88E1111 Ethernet PHYs installed, so add corresponding child nodes for 1G MDIO bus and enable it. For more information see schematics: http://wfcache.advantech.com/www/support/TI-EVM/download/Schematics/PDF/K2H_K2EVM-HK_SCH_A102_Rev1_0.pdf Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: keystone-evm: add spi nor flash supportGrygorii Strashko2014-05-121-0/+22
| | | | | | | | | | | | | | | | | | | k2hk, k2e, k2l EVM board have the same Micron N25Q128A11 SPI NOR Flash installed on SPI0 bus. The NOR Flash is splitted on two partistions: partition@0 label = "u-boot-spl"; reg = <0x0 0x80000>; partition@1 label = "misc"; reg = <0x80000 0xf80000>; Hence, add SPI NOR Flash nodes to all k2hk, k2e, k2l EVM boards. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: keystone: move i2c0 device node from SoC to board filesGrygorii Strashko2014-05-081-0/+7
| | | | | | | | | | | I2C devices are not the part of Keystone SoC and have to be defined in board DTS files. Hence, move i2c0 EEPROM device node from Keystone SoC to k2hk, k2e, k2l EVM files as they all have similar EEPROM SoCs installed. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: keystone: use common "ti,keystone" compatible instead of -evmIvan Khoronzhuk2014-03-201-1/+1
| | | | | | | | | | | | | | | | As suggested by Olof Johansson at http://www.spinics.net/lists/arm-kernel/msg314009.html. It be better just keeping a "ti,keystone" top-level compatible and just using that to probe. If so we don't have to touch the file for new boards in the future. So use common "ti,keystone" compatible in keystone.c for all boards. Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: k2hk-evm: set ubifs partition size for 512M NANDMurali Karicheri2014-03-201-1/+1
| | | | | | | | | | The UBIFS partition size was incorrectly defined as for 128M NAND, but on k2hk-evm installed NAND flash size is 512M. Hence, correct it. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: keystone: add AEMIF/NAND device entryIvan Khoronzhuk2014-02-281-0/+52
| | | | | | | Add AEMIF/NAND device entry. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: keystone: preparatory patch to support K2L and K2E SOCsMurali Karicheri2014-02-261-2/+4
| | | | | | | | | | | | | | | | | | | | | | | Current keystone.dtsi includes SoC specific definitions for K2HK SoCs. In order to support two addition keystone devices, k2 Edison and K2 Lamarr and corresponding EVMs, This patch restructure the dts files for the following:- - All clock nodes that are only available in k2hk SoC are moved from keystone-clocks.dtsi to a new k2hk-clocks.dtsi include file - The CPU nodes are now part of the soc specific k2hk.dtsi. - Change the compatibility string to ti,k2hk-evm and change the model name accordingly - Finally include k2hk-clocks.dtsi in k2hk.dtsi and that in k2hk-evm.dts Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: k2hk-evm: rename clock node to clocksGrygorii Strashko2014-02-171-1/+1
| | | | | | | Fix typo in clock(s) node name: "clock"-->"clocks". Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: k2hk-evm: add leds supportsGrygorii Strashko2014-02-171-0/+23
| | | | | | | | | | | | | | | | Keystone EVMK2HX supports 4 debug LEDs controlled by GPIO lines as following (active level is high); DBG_D1 green gpio12 DBG_D1 red gpio13 DBG_D1 blue gpio14 DBG_D1 blue gpio15 For more information see schematics: http://wfcache.advantech.com/www/support/TI-EVM/download/Schematics/PDF/K2H_K2EVM-HK_SCH_A102_Rev1_0.pdf Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: keystone: Add usb devicetree bindingsWingMan Kwok2013-12-121-0/+8
| | | | | | | | Added device tree support for TI's Keystone USB driver and updated the Documentation with device tree binding information. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: keystone: dts: add a k2hk-evm specific dts fileMurali Karicheri2013-12-121-0/+55
This patch adds K2 Kepler/Hawking evm (k2hk-evm) specific dts file. To enable re-use of bindings across multiple evms of this family, rename current keystone.dts to keystone.dtsi and include it in the evm specific dts file. K2 SoC has separate ref clock inputs for various clocks. So add separate ref clock nodes for ARM, DDR3A, DDR3B and PA PLL input clocks in k2hk-evm.dts. While at it, rename refclkmain to refclksys based on device User Guide naming convention Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
OpenPOWER on IntegriCloud