summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/exynos4210-universal_c210.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and ↵Marek Szyprowski2015-10-241-1/+1
| | | | | | | | | | | | | | | exynos4412 boards Exynos USB2 PHY driver now supports VBUS regulator, so add it to all boards which have it available. This also fixes commit 7eec1266751b ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2"), which added new regulators to Trats2 board, but without linking them to the consumers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 7eec1266751b ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2") Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: Use GPIO constants for flags cells in exynos4120 boardsJavier Martinez Canillas2015-10-081-20/+22
| | | | | | | | The board DTS are using numeric values instead of the defined GPIO constanst to express polarity, use them to make the DTS more clear. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: Use labels for overriding nodes for exynos4210-universal_c210Krzysztof Kozlowski2015-07-211-310/+310
| | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: add CPU OPP and regulator supply property for exynos4210Thomas Abraham2015-07-211-0/+4
| | | | | | | | | | | | | | | | | | For Exynos4210 platforms, add CPU operating points and CPU regulator supply properties for migrating from Exynos specific cpufreq driver to using generic cpufreq driver. Cc: Doug Anderson <dianders@chromium.org> Cc: Andreas Faerber <afaerber@suse.de> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Andreas Farber <afaerber@suse.de> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> [b.zolnierkie: removed exynos5250 and exynos5420 support for now] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [k.kozlowski: Rebased, moved cpu nodes to alphabetical position] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: enable hdmi support for exynos4210-universal_c210Tomasz Stanislawski2015-02-271-0/+57
| | | | | | | | | This patch adds configuration of hw modules required to enable HDMI support on Universal C210 board. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* Merge tag 'dt-for-linus' of ↵Linus Torvalds2015-02-171-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
| * ARM: dts: add 'dr_mode' property to hsotg devices for exynos boardsMarek Szyprowski2015-01-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | All currently supported boards use hsotg/dwc2 controller in device ('peripheral') mode, so add property which sets correct operation mode. This patch fixes support in recent changes in dwc2 driver, which added support for dual-role devices. Suggested-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* | ARM: dts: exynos4: Add stdout-path propertiesTomasz Figa2015-02-021-0/+1
|/ | | | | | | | | | This patch adds stdout-path property to chosen nodes of Exynos4 boards to enable use of earlycon feature without the need to hardcode port number in kernel itself. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: dts: Specify default clocks for Exynos4 camera devicesSylwester Nawrocki2014-11-221-0/+16
| | | | | | | | | | | | | Specify the default mux and divider clocks in device tree to ensure the FIMC devices on Trats, Trats2, Universal_c210 and Odroid X2/U3 boards are clocked from recommended clock source and with maximum supported frequency. For Trats2 also the MIPI-CSIS and the camera sensor clocks are configured, the 'clock-frequency' property is deprecated in favour of 'assigned-clock-rates' property. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: dts: add external sd card node for exynos4210-universal_c210Marek Szyprowski2014-05-231-0/+10
| | | | | | | | This patch enables support external SD card slot. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: dts: add multimedia nodes for exynos4210-universal_c210Marek Szyprowski2014-05-231-0/+23
| | | | | | | | | This patch enables support for multimedia blocks - fimc in mem2mem mode, no camera sensors support yet. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: dts: enable USB functionality for exynos4210-universal_c210Marek Szyprowski2014-05-231-0/+26
| | | | | | | | | | | This patch adds device tree nodes necessary to enable USB support on universalc210 board, this includes UDC controller (USB gadget) as well as EHCI and OHCI host ports. LDO3 and LDO8 regulators are switched to always on mode until EHCI and OHCI drivers will support them correctly. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: EXYNOS: Map SYSRAM through generic DT bindingsSachin Kamat2014-05-151-0/+15
| | | | | | | | | | | | | Instead of hardcoding the SYSRAM details for each SoC, pass this information through device tree (DT) and make the code SoC agnostic. Generic DT SRAM bindings are used for achieving this. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2014-04-081-0/+64
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "Highlights: - drm: Generic display port aux features, primary plane support, drm master management fixes, logging cleanups, enforced locking checks (instead of docs), documentation improvements, minor number handling cleanup, pseudofs for shared inodes. - ttm: add ability to allocate from both ends - i915: broadwell features, power domain and runtime pm, per-process address space infrastructure (not enabled) - msm: power management, hdmi audio support - nouveau: ongoing GPU fault recovery, initial maxwell support, random fixes - exynos: refactored driver to clean up a lot of abstraction, DP support moved into drm, LVDS bridge support added, parallel panel support - gma500: SGX MMU support, SGX irq handling, asle irq work fixes - radeon: video engine bringup, ring handling fixes, use dp aux helpers - vmwgfx: add rendernode support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits) DRM: armada: fix corruption while loading cursors drm/dp_helper: don't return EPROTO for defers (v2) drm/bridge: export ptn3460_init function drm/exynos: remove MODULE_DEVICE_TABLE definitions ARM: dts: exynos4412-trats2: enable exynos/fimd node ARM: dts: exynos4210-trats: enable exynos/fimd node ARM: dts: exynos4412-trats2: add panel node ARM: dts: exynos4210-trats: add panel node ARM: dts: exynos4: add MIPI DSI Master node drm/panel: add S6E8AA0 driver ARM: dts: exynos4210-universal_c210: add proper panel node drm/panel: add ld9040 driver panel/ld9040: add DT bindings panel/s6e8aa0: add DT bindings drm/exynos: add DSIM driver exynos/dsim: add DT bindings drm/exynos: disallow fbdev initialization if no device is connected drm/mipi_dsi: create dsi devices only for nodes with reg property drm/mipi_dsi: add flags to DSI messages Skip intel_crt_init for Dell XPS 8700 ...
| * ARM: dts: exynos4210-universal_c210: add proper panel nodeAndrzej Hajda2014-04-041-17/+54
| | | | | | | | | | | | | | | | This patch replaces panel bindings for panel initialized by boot loader with bindings to proper ld9040 panel. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| * ARM: dts: exynos4210-universal: add exynos/fimd nodeAndrzej Hajda2014-03-241-0/+27
| | | | | | | | | | | | | | | | | | | | The patch adds fimd node with display timings for exynos4210-universal device. It also makes LCD regulators always on. This allow to re-use panel initialized by boot loader. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
* | ARM: dts: Update Exynos DT files with generic compatible stringsSachin Kamat2014-03-211-1/+1
|/ | | | | | | | Add generic compatible strings to the respective board DT files. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: dts: fix PL330 MDMA1 address in DT for Universal C210 boardBartlomiej Zolnierkiewicz2013-10-161-0/+4
| | | | | | | | | | | | | | | | Revision 0 of Exynos4210 SoC (used on Universal C210 board) requires 'secure' PL330 MDMA1 address (0x12840000) instead of 'non-secure' one (0x12850000). Fix it by overriding the default PL330 MDMA1 address in exynos4210-universal_c210.dts. This is a Device Tree (DT) version of commit 91280e7 ("ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of Exynos4210 SOC") and fixes recent regression caused by conversion to DT-only setup on ARM EXYNOS. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: dts: use #include for all device trees for SamsungPadmavathi Venna2013-06-191-1/+1
| | | | | | | | | | Replace /include/ (dtc) with #include (C pre-processor) for all Samsung DT files Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: dts: exynops4210: really add universal_c210 dtsOlof Johansson2013-04-291-0/+352
I fumbled when resolving a merge conflict on application of commit 765d012c2389 (ARM: dts: exynos4210: Add basic dts file for universal_c210 board), and left out the dts source file. Here it is. Signed-off-by: Olof Johansson <olof@lixom.net>
OpenPOWER on IntegriCloud