summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/dbx5x0.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: ux500: correct typo in pinctrl Device Tree nodeLee Jones2013-01-301-1/+1
| | | | | | | The preference is to use '-' instead of '_' in compatible strings. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: ux500: Provide a link from AB8500 Pinctrl to the PRCMULee Jones2013-01-181-4/+4
| | | | | | | | | | | | | The AB8500 Pinctrl driver uses PRCMU register addresses to control Pinctrl related functions. For this to happen, the Pinctrl driver needs the PRCMU base to work from. We can do that using standard Open Firmware (of_*) function calls, but first we need a mechanism to gain access to the PRCMU device node. We're going to use a Phandle in this case. Signed-off-by: Lee Jones <lee.jones@linaro.org> [Added reg-names="prcmu"; to the prcmu DT node] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: ux500: add pinctrl address resourcesFabio Baltieri2012-12-261-1/+3
| | | | | | | | | | | Current nmk_pinctrl driver is not PRCMU dependent anymore, so it needs its own DT address resources to work properly, as done for platform_device in: f482833 ARM: ux500: add PRCM register base for pinctrl Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6Linus Torvalds2012-12-131-1/+27
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull battery subsystem updates from Anton Vorontsov: "Highlights: - Two new drivers from Pali Rohár and N900 hackers: rx51_battery and bq2415x_charger. The drivers are a part of a solution to replace the proprietary Nokia BME stack - Power supply core now registers devices with a thermal cooling subsystem, so we can now automatically throttle charging. Thanks to Ramakrishna Pallala! - Device tree support for ab8500 and max8925_power drivers - Random fixups and enhancements for a bunch of drivers." * tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6: (22 commits) max8925_power: Add support for device-tree initialization ab8500: Add devicetree support for chargalg ab8500: Add devicetree support for charger ab8500: Add devicetree support for btemp ab8500: Add devicetree support for fuelgauge twl4030_charger: Change TWL4030_MODULE_* ids to TWL_MODULE_* jz4740-battery: Use devm_request_and_ioremap jz4740-battery: Use devm_kzalloc bq27x00_battery: Fixup nominal available capacity reporting bq2415x_charger: Fix style issues bq2415x_charger: Add Kconfig/Makefile entries power_supply: Add bq2415x charger driver power_supply: Add new Nokia RX-51 (N900) power supply battery driver max17042_battery: Fix missing verify_model_lock() return value check ds2782_battery: Fix signedness bug in ds278x_read_reg16() lp8788-charger: Fix ADC channel names lp8788-charger: Fix wrong ADC conversion lp8788-charger: Use consumer device name on setting IIO channels power_supply: Register power supply for thermal cooling device power_supply: Add support for CHARGE_CONTROL_* attributes ...
| * ab8500: Add devicetree support for chargalgRajanikanth H.V2012-11-181-0/+5
| | | | | | | | | | | | | | This patch adds device tree support for charging algorithm driver Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
| * ab8500: Add devicetree support for chargerRajanikanth H.V2012-11-181-0/+6
| | | | | | | | | | | | | | This patch adds device tree support for ab8500-charger driver Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
| * ab8500: Add devicetree support for btempRajanikanth H.V2012-11-181-0/+5
| | | | | | | | | | | | | | This patch adds device tree support for battery-temperature-monitor driver Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
| * ab8500: Add devicetree support for fuelgaugeRajanikanth H.V2012-11-181-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | - This patch adds device tree support for fuelgauge driver - optimize bm devices platform_data usage and of_probe(...) Note: of_probe() routine for battery managed devices is made common across all bm drivers. - test status: - interrupt numbers assigned differs between legacy and FDT mode. Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
* | Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-12-131-37/+19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC device tree conversions and enablement from Olof Johansson: "Continued device tree conversion and enablement across a number of platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other smaller series as well. ux500 has seen continued conversion for platforms. Several platforms have seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra is adding data for new devices/drivers, and Exynos has a bunch of new bindings and devices added as well. So, pretty much the same progression in the right direction as the last few releases." Fix up conflicts as per Olof. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits) ARM: ux500: Rename dbx500 cpufreq code to be more generic ARM: dts: add missing ux500 device trees ARM: ux500: Stop registering the PCM driver from platform code ARM: ux500: Move board specific GPIO info out to subordinate DTS files ARM: ux500: Disable the MMCI gpio-regulator by default ARM: Kirkwood: remove kirkwood_ehci_init() from new boards ARM: Kirkwood: Add support LED of OpenBlocks A6 ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6 ARM: kirkwood: Add NAND partiton map for OpenBlocks A6 ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6 ARM: kirkwood: Add support DT of second I2C bus ARM: kirkwood: Convert mplcec4 board to pinctrl ARM: Kirkwood: Convert km_kirkwood to pinctrl ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl ARM: Kirkwood: Convert IX2-200 to pinctrl. ARM: Kirkwood: Convert lsxl boards to pinctrl. ARM: Kirkwood: Convert ib62x0 to pinctrl. ARM: Kirkwood: Convert GoFlex Net to pinctrl. ARM: Kirkwood: Convert dreamplug to pinctrl. ARM: Kirkwood: Convert dockstar to pinctrl. ...
| * | ARM: ux500: Move board specific GPIO info out to subordinate DTS filesLee Jones2012-11-271-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPIO numbers for the newly created gpio-regulator will differ from board to board. Therefore it's not sensible to leave this information in the top level DTSI file. Let's move them out to the DTS files where they can correctly vary. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | ARM: ux500: Disable the MMCI gpio-regulator by defaultLee Jones2012-11-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Not all supported boards will require a MMCI gpio-regulator, therefore it's a good idea to only enable the node when and if it is required. Let's disable it by default. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | ARM: ux500: Add node for the MMC GPIO regulatorLee Jones2012-11-011-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a very simple mechanism to change and SDI's voltage which consists of toggling some GPIOs. This scenario can be better handled if we convert it to a GPIO regulator. This patch provides one which can be read from Device Tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | ARM: ux500: Elaborate on SDI device node names in Device TreeLee Jones2012-11-011-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the DB8500 Reference Manual SDI devices are described as being part of peripheral blocks. This is more in line with how these devices are actually represented in hardware, so here we detail which peripheral block each of the SDI devices belong in the node name. Requested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | ARM: ux500: Move regulator-name properties out to board DTS filesLee Jones2012-11-011-31/+0
| |/ | | | | | | | | | | | | | | | | | | | | Regulator supply names should be allocated by board rather than per SoC, as the same SoC could be wired differently on varying hardware. Here we push all regulator-name allocation out to the dbx5x0 subordinate board files; HREF and Snowball. Requested-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | Thermal: Add ST-Ericsson DB8500 thermal properties and platform data.hongbo.zhang2012-11-151-0/+14
|/ | | | | | | | | | This patch adds device tree properties for ST-Ericsson DB8500 thermal driver, also adds the platform data to support the old fashion. Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
* ARM: ux500: Correct SDI5 address and add some format changesLee Jones2012-10-251-1/+6
| | | | | | | | Here we fix a simple copy and paste error and bring some node spaces back into line with the remainder of the tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DTLee Jones2012-10-251-0/+10
| | | | | | | | | | Now the Nomadik I2C driver has been converted to an AMBA one, we are required to provide the Primecell IDs via platform code. When booting with DT enabled these have to be specified in the device nodes. We do that here. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* ARM: ux500: Fix SSP register address formatLee Jones2012-09-201-1/+1
| | | | | | | | | | SSP won't probe unless the specified register address format is correct i.e. we have to specify that the address is in hex. After this patch has been applied, the SSP (SPI) driver probes as expected. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* ARM: ux500: Add nodes for the MSP into Device TreeLee Jones2012-09-201-0/+33
| | | | | | | | | This patch inserts all known MSP devices into the DBx5x0 Device Tree disabled and enables the two important ones for the Snowball low-cost development board. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* ARM: ux500: Add AB8500 CODEC node to DB8500 Device TreeLee Jones2012-09-201-0/+6
| | | | | | | | Ensure correct probing and pass though important configuration options to the AB8500 CODEC driver when DT is enabled Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devicesLee Jones2012-09-201-5/+20
| | | | | | | | | | | | | | Since initial support was provided for the Nomadik I2C driver, it has been converted to an AMBA device. AMBA devices are probed in a slightly different way to other devices, so we have to identify them using an "arm,primecell" compatible string. As well as doing just that, this patch specifies which regulators the controller should use and requests a clock-speed. The latter is provided as more of an example, as it's the same as the recently changed default configuration. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* ARM: ux500: Match Power-On-Key MFD and DTS compatible stringsLee Jones2012-09-201-1/+1
| | | | | | | | | | The compatible string found in the Power-On-Key's MFD cell matches the device name provided in the driver. Keeping this naming convention seems like a good idea, so we're changing the one found in the DTS file to match. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* ARM: ux500: Force AB8500 to use the GIC as its interrupt controllerLee Jones2012-09-201-0/+1
| | | | | | | | | | | | It's understood that the AB8500 should be subordinate to the DB8500; however, the AB8500 uses the GIC as it's interrupt controller. If we do not specify which IRQ controller to use the default is to use the next encountered IRQ controller as we climb the tree. This would be the DB8500. This patch ensures the AB8500 makes use of the correct interrupt controller. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* ARM: ux500: Identify the PRCMU as an interrupt controllerLee Jones2012-09-201-0/+2
| | | | | | | | | | We're just about to provide the DB8500-PRCMU with its own IRQ domain, so that its subordinate drivers can use it as an interrupt controller. It's obligatory for all IRQ controllers to reference themselves as such from its own node in Device Tree. This patch does just that. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* ARM: ux500: Rename db8500.dtsi to dbx5x0.dtsi to encompass the u9500, u8540 ↵Lee Jones2012-09-201-0/+592
and u9540 Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
OpenPOWER on IntegriCloud