summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: New driver for AMD Family 10h/11h CPUsClemens Ladisch2009-12-161-0/+60
| | | | | | | | This adds a driver for the internal temperature sensor of AMD Family 10h and 11h CPUs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* lis3: update documentation to match latest changesSamu Onkalo2009-12-151-7/+24
| | | | | | | | | | [akpm@linux-foundation.org: s/q/g/ (Randy)] Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Éric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lis3: update documentation and commentsÉric Piel2009-12-151-10/+14
| | | | | | | | | | | | Most of the documentation and comments were written when the driver was only supporting one type of chip, only via ACPI/HP. Update the info to the much clearer understanding that we have now. Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: w83627ehf updatesDaniel J Blueman2009-12-151-2/+8
| | | | | | | | | | | | | | | | Add control of fan minimum turn-on output levels, decoupling it from the fan turn-off output level. Add control of rate of change of fan output level. These in turn allow lower turn-off rotor speed and smoother transitions for better thermal and acoustic control authority. Add support for constant fan speed and proportional-response operations modes. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Hubbard <david.c.hubbard@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: (adt7475) Add VID support for the ADT7476Jean Delvare2009-12-091-1/+1
| | | | | | | | | | The ADT7476 has 5 dedicated pins for VID input, and the +12V input can optionally be used as a 6th VID pin. Add support for VID input. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
* hwmon: (adt7475) Add support for the ADT7476Jean Delvare2009-12-091-5/+15
| | | | | | | | | | | | Add support for the Analog Devices ADT7476 chip. This chip is largely compatible with the ADT7473 and ADT7475, with additional features. In particular, it has 5 voltage inputs instead of 2, and VID input pins. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
* hwmon: (adt7475) Add support for the ADT7490Jean Delvare2009-12-091-5/+29
| | | | | | | | | | | Add support for the Analog Devices ADT7490 chip. This chip is largely compatible with the ADT7473 and ADT7475, with additional features. In particular, it has 6 voltage inputs instead of 2. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
* hwmon: (adt7475) New documentationJean Delvare2009-12-091-87/+83
| | | | | | | | | | | | New documentation for the adt7475 driver, based on the adt7473 driver documentation. It is IMHO much more useful that the previous documentation which was essentially redundant with sysfs-interface. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
* hwmon: (adt7475) Add support for the ADT7473Jean Delvare2009-12-091-0/+2
| | | | | | | | | | | | | Add support for the ADT7473 to the adt7475 driver, and mark the adt7473 driver for removal. The ADT7473 and ADT7475 chips are almost the same chip and essentially compatible, so there's no point in having separate drivers for them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
* hwmon: (f71882fg) Add support for the f71889fg (version 2)Hans de Goede2009-12-091-0/+10
| | | | | | | | | | | | | | | | | | | | | | This adds support for the Fintek f71889fg to the f71882fg driver, many thanks to Gerd v. Egidy for providing (remote) access to a machine which such an ic. Note that this bit of the patch: - val = SENSORS_LIMIT(val, 0, 255); + + if (data->type == f71889fg) + val = SENSORS_LIMIT(val, -128, 127); + else + val = SENSORS_LIMIT(val, 0, 127); Changes behaviour for already supported models, the new behaviour is correct as the already supported models have bit 7 of the involved registers fixed at 0, so the previous behaviour which allowed setting temp zone limits > 127 was not correct. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Add Freescale MC13783 ADC driverLuotao Fu2009-12-091-0/+50
| | | | | | | | | | | | | This driver provides support for the ADC integrated into the Freescale MC13783 PMIC. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83627hf) Drop the force_addr module parameterJean Delvare2009-12-091-2/+27
| | | | | | | | | | This module parameter is there to workaround broken BIOS. I'm not even sure if it was used in the past 5 years, and it gets in the way of converting the driver to the MFD infrastructure. So tell the users how they can do the same from user-space. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rodolfo Giometti <giometti@linux.it>
* hwmon: (it87) Verify the VID pin usageJean Delvare2009-12-091-1/+0
| | | | | | | | | The VID input pins can alternatively be used as GPIOs. Make sure we have at least 4 pins used for VID, otherwise don't bother reading and exposing VID. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Adam Nielsen <a.nielsen@shikadi.net>
* hwmon: Clarify autopwm trip points documentationJean Delvare2009-12-091-2/+9
| | | | | | | | Document the case of hybrid automatic fan speed control implementations, where trip points are associated to both PWM output channels and temperature input channels. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: enhance the sysfs API for power metersDarrick J. Wong2009-10-291-1/+56
| | | | | | | | | | | | Augment the documentation of the hwmon sysfs API to accomodate ACPI power meters and the current desired behavior of power capping hardware drivers. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ltc4215/ltc4245: Discard obsolete detect methodsJean Delvare2009-10-042-6/+8
| | | | | | | | | | | | | | There is no point in implementing a detect callback for the LTC4215 and LTC4245, as these devices can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callbacks. This shrinks the binary module sizes by 36% and 46%, respectively. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ira W. Snyder <iws@ovro.caltech.edu>
* Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2009-09-232-170/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (ltc4245) Clear faults at startup hwmon: (ltc4215) Clear faults at startup hwmon: (coretemp) Add Lynnfield CPU hwmon: (coretemp) Add support for Penryn mobile CPUs hwmon: (coretemp) Fix Atom CPUs support hwmon: Delete deprecated FSC drivers hwmon: (adm1031) Add sysfs files for temperature offsets
| * hwmon: (coretemp) Add Lynnfield CPUHuaxu Wan2009-09-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | Add Lynnfield processor support. Lynnfield is a quad-core Nehalem based microprocessor for Desktop market, which is introduced in September 2009. Signed-off-by: Huaxu Wan <huaxu.wan@linux.intel.com> Signed-off-by: Kent Liu <kent.liu@linux.intel.com> Acked-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (coretemp) Add support for Penryn mobile CPUsRudolf Marek2009-09-231-1/+3
| | | | | | | | | | | | | | | | | | | | | | Following patch adds support for mobile Penryn CPUs. Intel documents this poorly. I asked the Coretemp author for some help. This is totally untested and may not work. Please test! Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@linux.intel.com> Cc: Kent Liu <kent.liu@linux.intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (coretemp) Fix Atom CPUs supportRudolf Marek2009-09-231-1/+1
| | | | | | | | | | | | | | | | | | | | Fix Atom CPUs support. Intel documents TjMax at 90 degrees C but some Atoms may have 125 degrees C (this is undocumented speculation). Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@linux.intel.com> Cc: Kent Liu <kent.liu@linux.intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: Delete deprecated FSC driversJean Delvare2009-09-231-169/+0
| | | | | | | | | | | | | | | | The legacy fscpos and fscher drivers have been replaced by the unified fschmd driver. The transition period is over now, we can delete them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com>
* | Merge branch 'release' of ↵Linus Torvalds2009-09-231-0/+51
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (119 commits) ACPI: don't pass handle for fixed hardware notifications ACPI: remove null pointer checks in deferred execution path ACPI: simplify deferred execution path acerhdf: additional BIOS versions acerhdf: convert to dev_pm_ops acerhdf: fix fan control for AOA150 model thermal: add missing Kconfig dependency acpi: switch /proc/acpi/{debug_layer,debug_level} to seq_file hp-wmi: fix rfkill memory leak on unload ACPI: remove unnecessary #ifdef CONFIG_DMI ACPI: linux/acpi.h should not include linux/dmi.h hwmon driver for ACPI 4.0 power meters topstar-laptop: add new driver for hotkeys support on Topstar N01 thinkpad_acpi: fix rfkill memory leak on unload thinkpad-acpi: report brightness events when required thinkpad-acpi: don't poll by default any of the reserved hotkeys thinkpad-acpi: Fix procfs hotkey reset command thinkpad-acpi: deprecate hotkey_bios_mask thinkpad-acpi: hotkey poll fixes thinkpad-acpi: be more strict when detecting a ThinkPad ...
| * Merge branch 'power-meter' into releaseLen Brown2009-09-191-0/+51
| |\
| | * hwmon driver for ACPI 4.0 power metersDarrick J. Wong2009-09-191-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver exposes ACPI 4.0 compliant power meters as hardware monitoring devices. This second revision of the driver also exports the ACPI string info as sysfs attributes, a list of the devices that the meter measures, and will send ACPI notifications over the ACPI netlink socket. This latest revision only enables the power capping controls if it can be confirmed that the power cap can be enforced by the hardware and explains how the notification interfaces work. [akpm@linux-foundation.org: remove default-y] [akpm@linux-foundation.org: build fix] Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* | | trivial: doc: hpfall: accept disk device to unload as argumentFrans Pop2009-09-211-3/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allows users who use an IDE driver for their disk to use hpfall without having to modify the source. By default /dev/sda is used. Suggested by Christian Thaeter in http://lkml.org/lkml/2009/3/25/505. While we're add it, improve error message if opening /dev/freefall fails. Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Christian Thaeter <ct@pipapo.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | trivial: doc: hpfall: reduce risk that hpfall can do harmChristian Thaeter2009-09-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve the example code to be at least useable, as in not causing harm (as shown below). Code can still be improved further, but this adds some basic safeguards. 1. hpfall *MUST* mlockall(MCL_CURRENT|MCL_FUTURE); itself! Since the Program sits and waits most of the time it becomes very likely swapped out. If it gets woken up when the laptop drops from the table while it is swapped out it actually triggers harddrive activity! 2. Daemonize hpfall using 'daemon(0,0)' (quick and dirty). 3. Give hpfall realtime priority. Should give a chance that it has less latency when woken up. Signed-off-by: Christian Thaeter <ct@pipapo.org> Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | trivial: fix typo "to to" in multiple filesAnand Gadiyar2009-09-211-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | trivial: cleanup hpfall example code (checkpatch)Frans Pop2009-09-211-33/+31
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes hpfall.c conform to kernel coding style. I have not fixed the C99 // comments on two lines as they help indicate that those are not actually comments but incomplete code. Before: total: 10 errors, 6 warnings, 101 lines checked After: total: 2 errors, 0 warnings, 99 lines checked Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Merge branch 'for-next' of ↵Linus Torvalds2009-09-182-0/+63
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (55 commits) regulator: Voltage count for AB3100 mfd: Convert WM8350 to use request_threaded_irq() mfd: Update MAINTAINERS patterns for WM831x mfd: Fix twl4030-power warnings regulator: AB3100 support rtc: AB3100 RTC support mfd: Fix ab3100-otp build failure mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board mfd: Print warning for twl4030 out-of-order script loading mfd: Add support for TWL4030/5030 dynamic power switching mfd: AB3100 OTP readout regulator: Add Freescale MC13783 driver mfd: Add Freescale MC13783 driver mfd: AB3100 disable irq nosync mfd: AB3100 alter default setting mfd: AB3100 propagate error mfd: AB3100 accessor function cleanups rtc: Add support for RTCs on Wolfson WM831x devices regulator: get pcap data from the parent device input: PCAP2 misc input driver ...
| * | hwmon: WM831x PMIC hardware monitoring driverMark Brown2009-09-171-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver adds support for the hardware monitoring features of the WM831x PMICs to the hwmon API. Monitoring is provided for the system voltages supported natively by the WM831x, the chip temperature, the battery temperature and the auxiliary inputs of the WM831x. Currently no alarms are supported, though digital comparators on the WM831x devices would allow these to be provided. Since the auxiliary and battery temperature input scaling depends on the system configuration the value is reported as a voltage to userspace. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | hwmon: Add WM835x PMIC hardware monitoring driverMark Brown2009-09-171-0/+26
| |/ | | | | | | | | | | | | | | | | This driver provides reporting of the status supply voltage rails of the WM835x series of PMICs via the hwmon API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | hwmon: (pcf8591) Documentation clean-upsJean Delvare2009-09-151-13/+15
| | | | | | | | | | | | | | | | | | | | | | Clean up the pcf8591 driver documentation: * The PCF8591 chip is now an NXP product. * Fix a sysfs path. * Fix the name of sysfs attributes. * And a few other random fixes. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
* | hwmon: (tmp421) Add documentationAndre Prendel2009-09-151-0/+36
|/ | | | | | | | Add documentation for the tmp421 driver. Signed-off-by: Andre Prendel <andre.prendel@gmx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (f71882fg) Add support for the F71858FHans de Goede2009-06-151-4/+8
| | | | | | | | | Add support for the hwmon part of the Fintek F71858FG superio IC to the f71882fg driver. Many thanks to Jelle de Jong for lending me a motherboard with this superio on it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83627ehf) Add W83627DHG-P supportJean Delvare2009-06-151-2/+9
| | | | | | | | | | Add support for the new incarnation of the Winbond/Nuvoton W83627DHG chip known as W83627DHG-P. It is basically the same as the original W83627DHG with an additional automatic can speed control mode (not supported by the driver yet.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Madhu <madhu.chinakonda@gmail.com>
* hwmon: (tmp401) Add documentationAndre Prendel2009-06-152-0/+61
| | | | | | | | | | | | | | Documentation for the tmp401 driver. The documentation describes the tmp401 driver and the supported Texas Instruments TMP401 and TMP411 temperature sensor chips. Further documentation for new sysfs attributes supported by this driver is added to Documentation/hwmon/sysfs-interface. Signed-off-by: Andre Prendel <andre.prendel@gmx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (ibmaem) Automatically load on HC10 bladeDarrick J. Wong2009-06-151-1/+1
| | | | | | | | Enable auto-probing for the HC10 blade and amend the supported system list. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Update documentation on fan_maxChristian Engelmayer2009-06-011-0/+6
| | | | | | | | | | Add fan_max description. Add fan limit alarm 'max_alarm' to the alarm section. Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: add support for GMT G760A fan speed PWM controllerHerbert Valerio Riedel2009-04-071-0/+36
| | | | | | | | | | | | | | | This controller can be found on the D-Link DNS-323 for instance, where it is to be configured via static i2c_board_info in the board-specific mach-orion/dns323-setup.c; this driver supports only the new-style driver model. Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Matthew Palmer <mpalmer@debian.org> Signed-off-by: Laurie Bradshaw <bradshaw.laurie@googlemail.com> Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: Add LTC4215 driverIra Snyder2009-04-011-0/+50
| | | | | | | | | | | | | | | | | | | | | | | Add Linux support for the Linear Technology LTC4215 Hot Swap controller I2C monitoring interface. I have tested the driver with my board, and it appears to work fine. With the power supplies disabled, it reads 11.93V input, 1.93V output, no current and no power. With the supplies enabled, it reads 11.93V input, 11.98V output, no current, no power. I'm not drawing any current at the moment, so this is reasonable. The value in the sense register never reads anything except 0, so I expect to get zero from the current and power calculations. I didn't attempt to support changing any of the chip's settings or enabling the FET. I'm not sure even how to do that and still fit within the hwmon framework. :) Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hp_accel: small documentation updatesPavel Machek2009-04-011-5/+15
| | | | | | | | | | | Fix english in Documentation, add "how to test" description. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Vladimir Botka <vbotka@suse.cz> Cc: <Quoc.Pham@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon: Define a standard interface for chassis intrusion detectionJean Delvare2009-03-301-0/+22
| | | | | | | | | | | Define a standard interface for the chassis intrusion detection feature some hardware monitoring chips have. Some drivers have custom sysfs entries for it, but a standard interface would allow integration with user-space (namely libsensors.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Matt Roberds <mattroberds@cox.net>
* Move the pcf8591 driver to hwmonJean Delvare2009-03-301-0/+90
| | | | | | | | | | | | | | Directory drivers/i2c/chips is going away, so drivers there must find new homes. For the pcf8591 driver, the best choice seems to be the hwmon subsystem. While the Philips PCF8591 device isn't a typical hardware monitoring chip, its DAC interface is compatible with the hwmon one, so it fits somewhat. If a better subsystem is ever created for ADC/DAC chips, the driver could be moved there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
* hwmon: (w83627ehf) Add support for W83667HGGong Jun2009-03-301-9/+20
| | | | | | | | | | | | | Add initial support for the Nuvoton W83667HG chip to the w83627ehf driver. It has been tested on ASUS P5QL PRO by Gong Jun. At the moment there is still a usability issue which is that only in6 or temp3 can be present on the W83667HG, so the driver shouldn't expose both. This will be addressed later. Signed-off-by: Gong Jun <JGong@nuvoton.com> Acked-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (ds1621) Clean up documentationJean Delvare2009-03-301-48/+3
| | | | | | | | | | * The alarms sysfs file is deprecated, and individual alarm files are self-explanatory. * The driver doesn't implement high-reslution temperature readings so don't document that. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
* hwmon: (lm90) Document support for the MAX6648/6692 chipsDarrick J. Wong2009-03-121-0/+10
| | | | | | | Update documentation to prevent further confusion/duplication. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hp accelerometer: add freefall detectionPavel Machek2009-02-182-0/+109
| | | | | | | | | | | | | | | This adds freefall handling to hp_accel driver. According to HP, it should just work, without us having to set the chip up by hand. hpfall.c is example .c program that parks the disk when accelerometer detects free fall. It should work; for now, it uses fixed 20seconds protection period. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Thomas Renninger <trenn@suse.de> Cc: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2009-01-151-0/+87
|\ | | | | | | | | | | | | | | | | | | | | * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probe hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX hwmon: (abituguru3) Match partial DMI board name strings hwmon: Add a driver for the ADT7475 hardware monitoring chip hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUs hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUs hwmon: (k8temp) Warn about fam F rev F errata
| * hwmon: Add a driver for the ADT7475 hardware monitoring chipJordan Crouse2009-01-151-0/+87
| | | | | | | | | | | | | | | | Hwmon driver for the ADT7475 chip. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | lis3: fix documentation to fit into 80 columnsPavel Machek2009-01-151-13/+17
|/ | | | | | | | | Fix lis3 documentation to fit into 80 columns. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud