summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mmc: dw_mmc: Add "disable-wp" device tree propertyDoug Anderson2013-02-243-3/+59
| | | | | | | | | | | | | | | | | | The "disable-wp" property is used to specify that a given SD card slot doesn't have a concept of write protect. This eliminates the need for special case code for SD slots that should never be write protected (like a micro SD slot or a dev board). The dw_mmc driver is special in needing to specify "disable-wp" because the lack of a "wp-gpios" property means to use the special purpose write protect line. On some other mmc devices the lack of "wp-gpios" means that write protect should be disabled. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: correct the EXCEPTION_EVENTS_STATUS value in commentZhang, YiX X2013-02-241-1/+1
| | | | | | | The right value is 54 according to eMMC 4.5 specification. Signed-off-by: ZhangYi <yix.x.zhang@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: mxs-mmc: Fix warning due to incorrect typeFabio Estevam2013-02-241-1/+1
| | | | | | | | | | | | | Fixes the following warning when building with W=1 option: drivers/mmc/host/mxs-mmc.c: In function 'mxs_mmc_adtc': drivers/mmc/host/mxs-mmc.c:401:2: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] The warning happens because 'i' is used in 'for_each_sg(sgl, sg, sg_len, i)' and should be made unsigned. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: mxs-mmc: Add MODULE_ALIAS()Fabio Estevam2013-02-241-0/+1
| | | | | | | | Add an entry for MODULE_ALIAS(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: mvsdio: add pinctrl integrationThomas Petazzoni2013-02-241-0/+6
| | | | | | | | | | | | | | | | | | | On many Marvell SoCs, the pins used for the SDIO interface are part of the MPP pins, that are muxable pins. In order to get the muxing of those pins correct, this commit integrates the mvsdio driver with the pinctrl infrastructure by calling devm_pinctrl_get_select_default() during ->probe(). Note that we permit this function to fail because not all Marvell platforms have yet been fully converted to using the pinctrl infrastructure. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mpl.ch> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: mvsdio: implement a Device Tree bindingThomas Petazzoni2013-02-112-15/+66
| | | | | | | | | | | | | | | | | | | | | This patch adds a simple Device Tree binding for the mvsdio driver, as well as the necessary documentation for it. Compatibility with non-DT platforms is preserved, by keeping the platform_data based initialization. We introduce a small difference between non-DT and DT platforms: DT platforms are required to provide a clocks = <...> property, which the driver uses to get the frequency of the clock that goes to the SDIO IP. The behaviour on non-DT platforms is kept unchanged: a clock reference is not mandatory, but the clock frequency must be passed in the "clock" field of the mvsdio_platform_data structure. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mpl.ch> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: mvsdio: use slot-gpio for card detect gpioThomas Petazzoni2013-02-111-30/+9
| | | | | | | | | | | | | | | | The MMC core subsystem provides in drivers/mmc/core/slot-gpio.c a nice set of helper functions to simplify the management of the card detect GPIO in MMC host drivers. This patch migrates the mvsdio driver to using those helpers, which will make the ->probe() code simpler, and therefore ease the process of adding a Device Tree binding for this driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mpl.ch> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: mvsdio: use slot-gpio infrastructure for write protect gpioThomas Petazzoni2013-02-111-25/+5
| | | | | | | | | | | | | | | | The MMC core subsystem provides in drivers/mmc/core/slot-gpio.c a nice set of helper functions to simplify the management of the write protect GPIO in MMC host drivers. This patch migrates the mvsdio driver to using those helpers, which will make the ->probe() code simpler, and therefore ease the process of adding a Device Tree binding for this driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mpl.ch> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-esdhc-imx: remove ESDHC_CD_GPIO handling from IO accessoryShawn Guo2013-02-111-17/+0
| | | | | | | | | With commit 9444e07 (mmc: remove unncessary mmc_gpio_free_cd() call from slot-gpio users) in place, the ESDHC_CD_GPIO handling in IO accessories becomes unnecessary. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci: introduce sdhci_update_clock helper to re-enable clockAndy Shevchenko2013-02-111-14/+13
| | | | | | | | There are three places where same piece of code is used. Let's split it to a separate function. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-pxav3: add IRQ wake up supportKevin Liu2013-02-111-0/+7
| | | | | | | | | [cjb: The MMP3 architecture requires a registered interrupt to retire wfi when waking from suspend.] Signed-off-by: Jialing Fu <jlfu@marvell.com> Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci: add IRQ wake up supportKevin Liu2013-02-111-18/+42
| | | | | | | | | Don't disable SD Host IRQ during suspend if it is wake up source. Enable wakeup event during suspend. Signed-off-by: Jialing Fu <jlfu@marvell.com> Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci: disable interrupt before free_irqKevin Liu2013-02-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Current code missed disabling interrupts before free irq which is shared. Notice below comments for function free_irq (kernel/irq/manage.c): On a shared IRQ the caller must ensure the interrupt is disabled on the card it drives before calling this function. Original code has below issue during suspend/resume when multiple SD hosts share the same IRQ: 1. Assume there are two hosts (host1 for emmc while host2 for sd) share the same mmc irq. 2. When system suspend, host2 will be suspended before host1. So the sequence is below: step1: irq handler for host2 removed -> step2: irq handler for host1 removed and irq disabled -> ... system suspended ... ... system resumed ... step3: irq enabled and the irq handler for host1 restored -> step4: irq handler for host2 restored 3. So there is the buggy time slot that the irq is enabled but the irq handler for host2 is removed. Then host2 interrupt can be triggered but can't be handled at that moment. Signed-off-by: Jialing Fu <jlfu@marvell.com> Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: add BCM2835 driverStephen Warren2013-02-114-0/+257
| | | | | | | | Add a very simple driver for the BCM2835 SoC, which is used in the Raspberry Pi board. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: fix async request mechanism for sequential read scenariosKonstantin Dorfman2013-02-119-19/+191
| | | | | | | | | | | | | | | | | | | | | When current request is running on the bus and if next request fetched by mmcqd is NULL, mmc context (mmcqd thread) gets blocked until the current request completes. This means that if new request comes in while the mmcqd thread is blocked, this new request can not be prepared in parallel to current ongoing request. This may result in delaying the new request execution and increase it's latency. This change allows to wake up the MMC thread on new request arrival. Now once the MMC thread is woken up, a new request can be fetched and prepared in parallel to the current running request which means this new request can be started immediately after the current running request completes. With this change read throughput is improved by 16%. Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org> Reviewed-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: queue: exclude asynchronous transfer for special requestSeungwon Jeon2013-02-111-0/+10
| | | | | | | | | | Unlike normal r/w request, special requests(discard, flush) is finished with a one-time issue_fn. Request change to mqrq_prev makes unnecessary call. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Konstantin Dorfman <kdorfman@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: simplify IRQ processingGuennadi Liakhovetski2013-02-111-46/+19
| | | | | | | | | The classical way to process IRQs is read out the status, ack all triggered IRQs, possibly mask them, then process them. Follow this simple procesure instead of the current complex custom algorithm. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: report all errorsTeppei Kamijou2013-02-111-8/+23
| | | | | | | | | | | | | Make error reporting in the driver more verbose. This patch is based on an earlier work by Teppei Kamijou, but we try to not add any new error messages to the log in the normal case to avoid confusing the user, and also add a few more dev_dbg() calls. Signed-off-by: Teppei Kamijou <teppei.kamijou.yb@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> [g.liakhovetski@gmx.de: avoid producing new errors in normal case] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: fix I/O errorsGuennadi Liakhovetski2013-02-111-1/+3
| | | | | | | | | | | | | The INT_BUFWEN IRQ often arrives with other bits set too. If they are not cleared, an additional IRQ can be triggered, sometimes also after the MMC request has already been completed. This leads to block I/O errors. Earlier Teppei Kamijou also observed these additional interrupts and proposed to explicitly wait for them. This patch chooses an alternative approach of clearing all active bits immediately, when processing the main interrupt. Reported-by: Teppei Kamijou <teppei.kamijou.yb@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: reset DMA completion immediately before starting DMAGuennadi Liakhovetski2013-02-111-2/+6
| | | | | | | | | | DMA completion can be signalled from the DMA callback and from the error handler. If both are called, the completion struct can enter an inconsistent state. To prevent this move completion initialisation immediately before activating DMA. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: reset error code for any opcodeGuennadi Liakhovetski2013-02-111-1/+1
| | | | | | | | If a command execution has produced an error, it has to be reset as a part of the error handling. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: fix a race, causing an Oops on SMPGuennadi Liakhovetski2013-02-111-3/+36
| | | | | | | | | | Oopses have been observed on SMP in the sh-mmcif IRQ thread, when the two IRQ threads run simultaneously on two CPUs. Also take care to guard the timeout work and the DMA completion callback from possible NULL-pointer dereferences and races. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: (cosmetic) simplify boolean return blocksGuennadi Liakhovetski2013-02-111-7/+2
| | | | | | | | Use "return condition" instead of "if (condition) return true; return false" in functions, returning bool. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: Terminate DMA transactions when detecting timeout or errorTeppei Kamijou2013-02-111-14/+17
| | | | | | | | | | | If a DMA transaction fails, terminate all outstanding DMA transfers and unmap buffers. Signed-off-by: Teppei Kamijou <teppei.kamijou.yb@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> [g.liakhovetski@gmx.de: forward-port, add dma_unmap_sg() in error cases] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: fix missing and consolidate IO completion timeoutsGuennadi Liakhovetski2013-02-111-23/+22
| | | | | | | | Read block and write block operations are currently missing completion timeouts. Add missing timeouts and consolidate them at one location. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: Avoid unnecessary mmc_delay() at mmc_card_sleepawake()Teppei Kamijou2013-02-111-1/+3
| | | | | | | | | | | SH/R-Mobile MMCIF host controller can wait while the card signals busy. Set MMC_CAP_WAIT_WHILE_BUSY to inform an upper layer (core/mmc_ops.c) not to insert unnecessary mmc_delay(). Signed-off-by: Teppei Kamijou <teppei.kamijou.yb@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeoutTeppei Kamijou2013-02-111-1/+1
| | | | | | | | | Timeout period should be properly normalized using msecs_to_jiffies(). Signed-off-by: Teppei Kamijou <teppei.kamijou.yb@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: Add support for eMMC Dual Data RateTeppei Kamijou2013-02-111-0/+14
| | | | | | | | | | | Some MMCIF implementations support the Dual Data Rate. With this patch, platforms can set the MMC_CAP_UHS_DDR50 capability flag in MMCIF platform data. This will let the MMC core to actually use the DDR mode. Signed-off-by: Teppei Kamijou <teppei.kamijou.yb@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: add support for bundled MMCIF IRQsShinya Kuribayashi2013-02-111-9/+16
| | | | | | | | On newer SoCs like R-Mobile U2, MMCIF interrupts are bundled. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: ensure run-time suspend call is processed before suspendTeppei Kamijou2013-02-111-1/+1
| | | | | | | | | | | | | | | | | | | | With this post-v2.6.35 change applied: commit a0a1a5fd4fb15ec61117c759fe9f5c16c53d9e9c Author: Tejun Heo <tj@kernel.org> Date: Tue Jun 29 10:07:12 2010 +0200 workqueue: reimplement workqueue freeze using max_active freeze_workqueues_begin() was introduced and workqueue now gets frozen before device drivers suspend operations. We have to ensure that run-time PM suspend operation completes before system-wide suspend is started. Signed-off-by: Teppei Kamijou <teppei.kamijou.yb@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sh_mmcif: force to fail CMD52 immediatelyTeppei Kamijou2013-02-111-0/+1
| | | | | | | | | | | | mmc_rescan() sends CMD52 (SD_IO_RW_DIRECT) to reset SDIO card during card detection. CMD52 should be ignored by SD/eMMC cards, but we can also abort it in the driver immediately, since MMCIF doesn't support SDIO cards anyway. Signed-off-by: Teppei Kamijou <teppei.kamijou.yb@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-esdhc-imx: use slot-gpio helpers for CD and WPShawn Guo2013-02-111-40/+16
| | | | | | | Use slot-gpio helpers to save some code in the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: remove unncessary mmc_gpio_free_cd() call from slot-gpio usersShawn Guo2013-02-113-19/+0
| | | | | | | | | | Since slot-gpio uses devm_* managed functions in mmc_gpio_request_cd() now, we can remove those mmc_gpio_free_cd() call from host drivers' .probe() error path and .remove(). Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: slot-gpio: use devm_* managed functions to ease usersShawn Guo2013-02-111-6/+51
| | | | | | | | | | Use devm_* managed functions, so that slot-gpio users do not have to call mmc_gpio_free_ro/cd to free up resources requested in mmc_gpio_request_ro/cd. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci: query card presence from cd-gpio before asking SDHCIShawn Guo2013-02-111-13/+16
| | | | | | | | | | | | | | | | Call mmc_gpio_get_cd() to query card presence from cd-gpio before asking SDHCI. The rationale behind this change is that flag SDHCI_QUIRK_BROKEN_CARD_DETECTION is designed for SDHCI controller to tell that SDHCI_PRESENT_STATE is broken, and it should be used for this case only. So when cd-gpio is being used, the controller should set the flag to tell that SDHCI_PRESENT_STATE is not available. However, the existing code will skip checking cd-gpio as long as flag SDHCI_QUIRK_BROKEN_CARD_DETECTION is set. Change the querying order between cd-gpio and SDHCI to support the rationale above. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdio: print correct UHS mode during card detectionSubhash Jadavani2013-02-111-0/+5
| | | | | | | | | | | | | When SDIO3.0 card is detected, incorrect bus speed mode is printed as part of card detection print in kernel logs. This change fixes it so that user won't be confused by looking at incorrect card detection message in logs. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Tested-by: Jackey Shen <Jackey.Shen@amd.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequenceSujit Reddy Thumma2013-02-112-11/+19
| | | | | | | | | | | | | According to UHS-I initialization sequence for SDIO 3.0 cards, the host must set bit[24] (S18R) of OCR register during OCR handshake to know whether the SDIO card is capable of doing 1.8V I/O. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Johan Rudholm <johan.rudholm@stericsson.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdio: fix resume failure due to lack of CMD52 resetSubhash Jadavani2013-02-111-2/+4
| | | | | | | | | | | | | | If SDIO keep power flag (MMC_PM_KEEP_POWER) is not set, card would be reinitialized during resume but as we are not resetting (CMD52 reset) the SDIO card during this reinitialization, card may fail to respond back to subsequent commands (CMD5 etc...). This change resets the card before the reinitialization of card during resume. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* digsig: Fix memory leakage in digsig_verify_rsa()YOSHIFUJI Hideaki2013-02-011-0/+2
| | | | | | | | | | digsig_verify_rsa() does not free kmalloc'ed buffer returned by mpi_get_buffer(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Cc: stable@vger.kernel.org Signed-off-by: James Morris <james.l.morris@oracle.com>
* Linux 3.8-rc6v3.8-rc6Linus Torvalds2013-02-011-2/+2
|
* Merge tag 'dm-3.8-fixes-2' of ↵Linus Torvalds2013-02-012-14/+5
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull more device-mapper fixes from Alasdair G Kergon: "A fix for stacked dm thin devices and a fix for the new dm WRITE SAME support." * tag 'dm-3.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm: fix write same requests counting dm thin: fix queue limits stacking
| * dm: fix write same requests countingAlasdair G Kergon2013-01-311-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | When processing write same requests, fix dm to send the configured number of WRITE SAME requests to the target rather than the number of discards, which is not always the same. Device-mapper WRITE SAME support was introduced by commit 23508a96cd2e857d57044a2ed7d305f2d9daf441 ("dm: add WRITE SAME support"). Signed-off-by: Alasdair G Kergon <agk@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com>
| * dm thin: fix queue limits stackingMike Snitzer2013-01-311-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | thin_io_hints() is blindly copying the queue limits from the thin-pool which can lead to incorrect limits being set. The fix here simply deletes the thin_io_hints() hook which leaves the existing stacking infrastructure to set the limits correctly. When a thin-pool uses an MD device for the data device a thin device from the thin-pool must respect MD's constraints about disallowing a bio from spanning multiple chunks. Otherwise we can see problems. If the raid0 chunksize is 1152K and thin-pool chunksize is 256K I see the following md/raid0 error (with extra debug tracing added to thin_endio) when mkfs.xfs is executed against the thin device: md/raid0:md99: make_request bug: can't convert block across chunks or bigger than 1152k 6688 127 device-mapper: thin: bio sector=2080 err=-5 bi_size=130560 bi_rw=17 bi_vcnt=32 bi_idx=0 This extra DM debugging shows that the failing bio is spanning across the first and second logical 1152K chunk (sector 2080 + 255 takes the bio beyond the first chunk's boundary of sector 2304). So the bio splitting that DM is doing clearly isn't respecting the MD limits. max_hw_sectors_kb is 127 for both the thin-pool and thin device (queue_max_hw_sectors returns 255 so we'll excuse sysfs's lack of precision). So this explains why bi_size is 130560. But the thin device's max_hw_sectors_kb should be 4 (PAGE_SIZE) given that it doesn't have a .merge function (for bio_add_page to consult indirectly via dm_merge_bvec) yet the thin-pool does sit above an MD device that has a compulsory merge_bvec_fn. This scenario is exactly why DM must resort to sending single PAGE_SIZE bios to the underlying layer. Some additional context for this is available in the header for commit 8cbeb67a ("dm: avoid unsupported spanning of md stripe boundaries"). Long story short, the reason a thin device doesn't properly get configured to have a max_hw_sectors_kb of 4 (PAGE_SIZE) is that thin_io_hints() is blindly copying the queue limits from the thin-pool device directly to the thin device's queue limits. Fix this by eliminating thin_io_hints. Doing so is safe because the block layer's queue limits stacking already enables the upper level thin device to inherit the thin-pool device's discard and minimum_io_size and optimal_io_size limits that get set in pool_io_hints. But avoiding the queue limits copy allows the thin and thin-pool limits to be different where it is important, namely max_hw_sectors_kb. Reported-by: Daniel Browning <db@kavod.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* | Merge branch 'for-3.8/upstream-fixes' of ↵Linus Torvalds2013-02-014-1/+16
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid PullHID fixes from Jiri Kosina: - fix i2c-hid and hidraw interaction, by Benjamin Tissoires - a quirk to make a particular device (Formosa IR receiver) work properly, by Nicholas Santos * 'for-3.8/upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: i2c-hid: fix i2c_hid_output_raw_report HID: usbhid: quirk for Formosa IR receiver HID: remove x bit from sensor doc
| * | HID: i2c-hid: fix i2c_hid_output_raw_reportBenjamin Tissoires2013-01-311-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c_hid_output_raw_report is used by hidraw to forward set_report requests. The current implementation of i2c_hid_set_report needs to take the report_id as an argument. The report_id is stored in the first byte of the buffer in argument of i2c_hid_output_raw_report. Not removing the report_id from the given buffer adds this byte 2 times in the command, leading to a non working command. Reported-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: usbhid: quirk for Formosa IR receiverNicholas Santos2013-01-032-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch to add the Formosa Industrial Computing, Inc. Infrared Receiver [IR605A/Q] to hid-ids.h and hid-quirks.c. This IR receiver causes about a 10 second timeout when the usbhid driver attempts to initialze the device. Adding this device to the quirks list with HID_QUIRK_NO_INIT_REPORTS removes the delay. Signed-off-by: Nicholas Santos <nicholas.santos@gmail.com> [jkosina@suse.cz: fix ordering] Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: remove x bit from sensor docJiri Kosina2012-12-141-0/+0
| | | | | | | | | | | | | | | Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge tag 'nfs-for-3.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds2013-02-015-58/+86
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull NFS client bugfixes from Trond Myklebust: - Error reporting in nfs_xdev_mount incorrectly maps all errors to ENOMEM - Fix an NFSv4 refcounting issue - Fix a mount failure when the server reboots during NFSv4 trunking discovery - NFSv4.1 mounts may need to run the lease recovery thread. - Don't silently fail setattr() requests on mountpoints - Fix a SUNRPC socket/transport livelock and priority queue issue - We must handle NFS4ERR_DELAY when resetting the NFSv4.1 session. * tag 'nfs-for-3.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.1: Handle NFS4ERR_DELAY when resetting the NFSv4.1 session SUNRPC: When changing the queue priority, ensure that we change the owner NFS: Don't silently fail setattr() requests on mountpoints NFSv4.1: Ensure that nfs41_walk_client_list() does start lease recovery NFSv4: Fix NFSv4 trunking discovery NFSv4: Fix NFSv4 reference counting for trunked sessions NFS: Fix error reporting in nfs_xdev_mount
| * | | NFSv4.1: Handle NFS4ERR_DELAY when resetting the NFSv4.1 sessionTrond Myklebust2013-01-301-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NFS4ERR_DELAY is a legal reply when we call DESTROY_SESSION. It usually means that the server is busy handling an unfinished RPC request. Just sleep for a second and then retry. We also need to be able to handle the NFS4ERR_BACK_CHAN_BUSY return value. If the NFS server has outstanding callbacks, we just want to similarly sleep & retry. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
| * | | SUNRPC: When changing the queue priority, ensure that we change the ownerTrond Myklebust2013-01-301-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a livelock in the xprt->sending queue where we end up never making progress on lower priority tasks because sleep_on_priority() keeps adding new tasks with the same owner to the head of the queue, and priority bumps mean that we keep resetting the queue->owner to whatever task is at the head of the queue. Regression introduced by commit c05eecf636101dd4347b2d8fa457626bf0088e0a (SUNRPC: Don't allow low priority tasks to pre-empt higher priority ones). Reported-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
OpenPOWER on IntegriCloud