summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* UBIFS: lessen amount of debugging check typesArtem Bityutskiy2011-07-046-28/+13
| | | | | | | | | | | | We have too many different debugging checks - lessen the amount by merging all index-related checks into one. At the same time, move the "force in-the-gap" test to the "index checks" class, because it is too heavy for the "general" class. This patch merges TNC, Old index, and Index size check and calles this just "index checks". Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: introduce helper functions for debugging checks and testsArtem Bityutskiy2011-07-0412-56/+75
| | | | | | | | | | | | | | | | | | | | | This patch introduces helper functions for all debugging checks, so instead of doing if (!(ubifs_chk_flags & UBIFS_CHK_GEN)) we now do if (!dbg_is_chk_gen(c)) This is a preparation to further changes where the flags will go away, and we'll need to only change the helper functions, but the code which utilizes them won't be touched. At the same time this patch removes 'dbg_force_in_the_gaps()', 'dbg_force_in_the_gaps_enabled()', and dbg_failure_mode helpers for consistency. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: amend debugging inode size check function prototypeArtem Bityutskiy2011-07-044-6/+9
| | | | | | | | Add 'const struct ubifs_info *c' parameter to 'dbg_check_synced_i_size()' function because we'll need it in the next patch when we switch to debugfs. So this patch is just a preparation. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: amend debugging name check function prototypeArtem Bityutskiy2011-07-041-3/+5
| | | | | | | | | | Add 'struct ubifs_info *c' parameter to the 'dbg_check_name()' debugging function - it will be needed in one of the following commits where we switch to debugfs. So this is just a preparation. Mark parameters as 'const' while on it. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: add few commentaries about TNCArtem Bityutskiy2011-07-041-0/+26
| | | | | | | Add a couple of comments - while looking into TNC I could not easily figure out few facts, so it is a good idea to document them in the code. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: use correct flags in lpropsArtem Bityutskiy2011-07-043-8/+8
| | | | | | | | | | | | The UBIFS lpt tree is in many aspects similar to the TNC tree, and we have similar flags for these trees. And by mistake we use the COW_ZNODE flag for LPT in some places, instead of the right flag COW_CNODE. And this works only because these two constants have the same value. This patch makes all the LPT code to use COW_CNODE and also changes COW_CNODE constant value to make sure we do not misuse the flags any more. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: harmonize znode flag helpersArtem Bityutskiy2011-07-044-12/+34
| | | | | | | | | | | We have 3 znode flags: cow, obsolete, dirty. For the last flag we have a 'ubifs_zn_dirty()' helper function, but for the other 2 flags we use 'test_bit()' directly. This patch makes the situation more consistent and introduces helpers for the other 2 flags: 'ubifs_zn_cow()' and 'ubifs_zn_obsolete()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: remove dead codeArtem Bityutskiy2011-07-041-76/+30
| | | | | | | | Remove dead pieces of code under "if (c->min_io_size == 1)" statement - we never execute it because in UBIFS 'c->min_io_size' is always at least 8. This are leftovers from old pre-mainline prototype. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: remove unnecessary bracketsArtem Bityutskiy2011-07-041-1/+1
| | | | | | | Remove unnecessary brackets in "inode->i_flags |= (S_NOCMTIME)" statement to make the code not look silly. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: minor cleanup: use S_ISREG helperArtem Bityutskiy2011-07-041-1/+1
| | | | | | | Instead of using long "(inode->i_mode & S_IFMT) != S_IFREG" expression, use shorted "!S_ISREG(inode->i_mode)". Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: rename dbg_check_dir_size functionArtem Bityutskiy2011-07-043-4/+4
| | | | | | | Since this function is not only about size checking, rename it to 'dbg_check_dir()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: improve inode dumping functionArtem Bityutskiy2011-07-043-5/+60
| | | | | | | | | Teach 'dbg_dump_inode()' dump directory entries for directory inodes. This requires few additional changes: 1. The 'c' argument of 'dbg_dump_inode()' cannot be const any more. 2. Users of 'dbg_dump_inode()' should not have 'tnc_mutex' locked. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: dump stack when pnode or nnode reading failsArtem Bityutskiy2011-07-041-0/+2
| | | | | | When we fail to read a pnode or nnode - print stacktrace if debugging is enabled. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: lessen the size of debugging info data structureArtem Bityutskiy2011-07-042-7/+22
| | | | | | | | | | | | | | | | This patch lessens the 'struct ubifs_debug_info' size by 90 bytes by allocating less bytes for the debugfs root directory name. It introduces macros for the name patter an length instead of hard-coding 100 bytes. It also makes UBIFS use 'snprintf()' and teaches it to gracefully catch situations when the name array is too short. Additionally, this patch makes 2 unrelated changes - I just thought they do not deserve separate commits: simplifies 'ubifs_assert()' for non-debugging case and makes 'dbg_debugfs_init()' properly verify debugfs return code which may be an error code or NULL, so we should you 'IS_ERR_OR_NULL()' instead of 'IS_ERR()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: return EROFS in case of broken commitArtem Bityutskiy2011-07-041-2/+2
| | | | | | | | | If commit failed and it is in broken state, UBIFS switches to R/O mode. Most operations return -EROFS in this case, except of commit which returns -EINVAL. Make it return -EROFS too for consistency. This is also important for our power cut emulation testing. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* Linux 3.0-rc5v3.0-rc5Linus Torvalds2011-06-271-1/+1
|
* drm/i915: more struct_mutex lockingHugh Dickins2011-06-272-2/+6
| | | | | | | | | | | | | | | | When auditing the locking in i915_gem.c (for a prospective change which I then abandoned), I noticed two places where struct_mutex is not held across GEM object manipulations that would usually require it. Since one is in initial setup and the other in driver unload, I'm guessing the mutex is not required for either; but post a patch in case it is. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drm/i915: use shmem_truncate_rangeHugh Dickins2011-06-271-5/+2
| | | | | | | | | | | | | | | | | | | The interface to ->truncate_range is changing very slightly: once "tmpfs: take control of its truncate_range" has been applied, this can be applied. For now there is only a slight inefficiency while this remains unapplied, but it will soon become essential for managing shmem's use of swap. Change i915_gem_object_truncate() to use shmem_truncate_range() directly: which should also spare i915 later change if we switch from inode_operations->truncate_range to file_operations->fallocate. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drm/i915: use shmem_read_mapping_pageHugh Dickins2011-06-272-17/+15
| | | | | | | | | | | | | | | | | | | | | | | | Soon tmpfs will stop supporting ->readpage and read_cache_page_gfp(): once "tmpfs: add shmem_read_mapping_page_gfp" has been applied, this patch can be applied to ease the transition. Make i915_gem_object_get_pages_gtt() use shmem_read_mapping_page_gfp() in the one place it's needed; elsewhere use shmem_read_mapping_page(), with the mapping's gfp_mask properly initialized. Forget about __GFP_COLD: since tmpfs initializes its pages with memset, asking for a cold page is counter-productive. Include linux/shmem_fs.h also in drm_gem.c: with shmem_file_setup() now declared there too, we shall remove the prototype from linux/mm.h later. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drm/ttm: use shmem_read_mapping_pageHugh Dickins2011-06-271-2/+3
| | | | | | | | | | | | | | | | | Soon tmpfs will stop supporting ->readpage and read_mapping_page(): once "tmpfs: add shmem_read_mapping_page_gfp" has been applied, this patch can be applied to ease the transition. ttm_tt_swapin() and ttm_tt_swapout() use shmem_read_mapping_page() in place of read_mapping_page(), since their swap_space has been created with shmem_file_setup(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/tty/serial/8250_pci.c: fix warningAndrew Morton2011-06-271-1/+1
| | | | | | | | | | Fis the warning drivers/tty/serial/8250_pci.c:1457: warning: initialization from incompatible pointer type Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/misc/ioc4.c: fix section mismatch / race conditionRalf Baechle2011-06-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | Fix this section mismatch: WARNING: drivers/misc/ioc4.o(.data+0x144): Section mismatch in reference from the variable ioc4_load_modules_work to the function .devinit.text:ioc4_load_modules() The variable ioc4_load_modules_work references the function __devinit ioc4_load_modules() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console This one is potentially fatal; by the time ioc4_load_modules is invoked it may already have been freed. For that reason ioc4_load_modules_work can't be turned to __devinitdata but also because it's referenced in ioc4_exit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Brent Casavant <bcasavan@sgi.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-lp5523.c: fix section mismatchesRalf Baechle2011-06-271-2/+2
| | | | | | | | | | | | | | | | | Fix this section mismatch: WARNING: drivers/leds/leds-lp5523.o(.text+0x12f4): Section mismatch in reference from the function lp5523_probe() to the function .init.text:lp5523_init_led() The function lp5523_probe() references the function __init lp5523_init_led(). This is often because lp5523_probe lacks a __init annotation or the annotation of lp5523_init_led is wrong. Fixing this one triggers one more mismatch, fix that one as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/leds/leds-lp5521.c: fix section mismatchesRalf Baechle2011-06-271-2/+2
| | | | | | | | | | | | | | | | | Fix this section mismatch: WARNING: drivers/leds/leds-lp5521.o(.text+0xf2c): Section mismatch in reference from the function lp5521_probe() to the function .init.text:lp5521_init_led() The function lp5521_probe() references the function __init lp5521_init_led(). This is often because lp5521_probe lacks a __init annotation or the annotation of lp5521_init_led is wrong. Fixing this mismatch triggers one more mismatch, fix that one as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* memcg: fix direct softlimit reclaim to be called in limit pathKAMEZAWA Hiroyuki2011-06-271-12/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d149e3b25d7c ("memcg: add the soft_limit reclaim in global direct reclaim") adds a softlimit hook to shrink_zones(). By this, soft limit is called as try_to_free_pages() do_try_to_free_pages() shrink_zones() mem_cgroup_soft_limit_reclaim() Then, direct reclaim is memcg softlimit hint aware, now. But, the memory cgroup's "limit" path can call softlimit shrinker. try_to_free_mem_cgroup_pages() do_try_to_free_pages() shrink_zones() mem_cgroup_soft_limit_reclaim() This will cause a global reclaim when a memcg hits limit. This is bug. soft_limit_reclaim() should be called when scanning_global_lru(sc) == true. And the commit adds a variable "total_scanned" for counting softlimit scanned pages....it's not "total". This patch removes the variable and update sc->nr_scanned instead of it. This will affect shrink_slab()'s scan condition but, global LRU is scanned by softlimit and I think this change makes sense. TODO: avoid too much scanning of a zone when softlimit did enough work. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Ying Han <yinghan@google.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* taskstats: don't allow duplicate entries in listener modeVasiliy Kulikov2011-06-271-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently a single process may register exit handlers unlimited times. It may lead to a bloated listeners chain and very slow process terminations. Eg after 10KK sent TASKSTATS_CMD_ATTR_REGISTER_CPUMASKs ~300 Mb of kernel memory is stolen for the handlers chain and "time id" shows 2-7 seconds instead of normal 0.003. It makes it possible to exhaust all kernel memory and to eat much of CPU time by triggerring numerous exits on a single CPU. The patch limits the number of times a single process may register itself on a single CPU to one. One little issue is kept unfixed - as taskstats_exit() is called before exit_files() in do_exit(), the orphaned listener entry (if it was not explicitly deregistered) is kept until the next someone's exit() and implicit deregistration in send_cpu_listeners(). So, if a process registered itself as a listener exits and the next spawned process gets the same pid, it would inherit taskstats attributes. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: fix assertion mapping->nrpages == 0 in end_writeback()Jan Kara2011-06-273-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under heavy memory and filesystem load, users observe the assertion mapping->nrpages == 0 in end_writeback() trigger. This can be caused by page reclaim reclaiming the last page from a mapping in the following race: CPU0 CPU1 ... shrink_page_list() __remove_mapping() __delete_from_page_cache() radix_tree_delete() evict_inode() truncate_inode_pages() truncate_inode_pages_range() pagevec_lookup() - finds nothing end_writeback() mapping->nrpages != 0 -> BUG page->mapping = NULL mapping->nrpages-- Fix the problem by doing a reliable check of mapping->nrpages under mapping->tree_lock in end_writeback(). Analyzed by Jay <jinshan.xiong@whamcloud.com>, lost in LKML, and dug out by Miklos Szeredi <mszeredi@suse.de>. Cc: Jay <jinshan.xiong@whamcloud.com> Cc: Miklos Szeredi <mszeredi@suse.de> Signed-off-by: Jan Kara <jack@suse.cz> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm/memory-failure.c: fix spinlock vs mutex orderPeter Zijlstra2011-06-272-18/+8
| | | | | | | | | | We cannot take a mutex while holding a spinlock, so flip the order and fix the locking documentation. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/misc/lkdtm.c: fix race when crashpoint is hit multiple times before ↵Josh Hunt2011-06-271-0/+8
| | | | | | | | | | | | | | | | checking count We observed the crash point count going negative in cases where the crash point is hit multiple times before the check of "count == 0" is done. Because of this we never call lkdtm_do_action(). This patch just adds a spinlock to protect count. Reported-by: Tapan Dhimant <tdhimant@akamai.com> Signed-off-by: Josh Hunt <johunt@akamai.com> Acked-by: Ankita Garg <ankita@in.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* include/linux/compat.h: declare compat_sys_sendmmsg()Chris Metcalf2011-06-271-0/+2
| | | | | | | | | | This is required for tilegx to be able to use the compat unistd.h header where compat_sys_sendmmsg() is now mentioned. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* romfs: fix romfs_get_unmapped_area() argument checkBob Liu2011-06-271-2/+6
| | | | | | | | | | | | | | | | | romfs_get_unmapped_area() checks argument `len' without considering PAGE_ALIGN which will cause do_mmap_pgoff() return -EINVAL error after commit f67d9b1576c ("nommu: add page_align to mmap"). Fix the check by changing it in same way ramfs_nommu_get_unmapped_area() was changed in ramfs/file-nommu.c. Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Greg Ungerer <gerg@snapgear.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* um: add asm/percpu.hRichard Weinberger2011-06-271-0/+6
| | | | | | | | | To make SLUB work on UML we need this_cpu_cmpxchg from asm-generic/percpu.h. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-ds1307.c: add support for RTC device pt7c4338Priyanka Jain2011-06-271-0/+1
| | | | | | | | | | | | | | | | | PT7C4338 chip is being manufactured by Pericom Technology Inc. It is a serial real-time clock which provides: 1) Low-power clock/calendar. 2) Programmable square-wave output. It has 56 bytes of nonvolatile RAM. Its register set is same as that of rtc device: DS1307. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tmpfs: add shmem_read_mapping_page_gfpHugh Dickins2011-06-272-7/+33
| | | | | | | | | | | | | | | | | | | | | | | | Although it is used (by i915) on nothing but tmpfs, read_cache_page_gfp() is unsuited to tmpfs, because it inserts a page into pagecache before calling the filesystem's ->readpage: tmpfs may have pages in swapcache which only it knows how to locate and switch to filecache. At present tmpfs provides a ->readpage method, and copes with this by copying pages; but soon we can simplify it by removing its ->readpage. Provide shmem_read_mapping_page_gfp() now, ready for that transition, Export shmem_read_mapping_page_gfp() and add it to list in shmem_fs.h, with shmem_read_mapping_page() inline for the common mapping_gfp case. (shmem_read_mapping_page_gfp or shmem_read_cache_page_gfp? Generally the read_mapping_page functions use the mapping's ->readpage, and the read_cache_page functions use the supplied filler, so I think read_cache_page_gfp was slightly misnamed.) Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tmpfs: take control of its truncate_rangeHugh Dickins2011-06-273-24/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: move shmem prototypes to shmem_fs.hHugh Dickins2011-06-274-11/+19
| | | | | | | | | | | | | Before adding any more global entry points into shmem.c, gather such prototypes into shmem_fs.h. Remove mm's own declarations from swap.h, but for now leave the ones in mm.h: because shmem_file_setup() and shmem_zero_setup() are called from various places, and we should not force other subsystems to update immediately. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: move vmtruncate_range to truncate.cHugh Dickins2011-06-272-24/+24
| | | | | | | | | | You would expect to find vmtruncate_range() next to vmtruncate() in mm/truncate.c: move it there. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix some kernel-doc warningsVitaliy Ivanov2011-06-273-2/+1
| | | | | | | | | | | | | Fix 'make htmldocs' warnings: Warning(/include/linux/hrtimer.h:153): No description found for parameter 'clockid' Warning(/include/linux/device.h:604): Excess struct/union/enum/typedef member 'of_match' description in 'device' Warning(/include/net/sock.h:349): Excess struct/union/enum/typedef member 'sk_rmem_alloc' description in 'sock' Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-06-2714-28/+74
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: queue: bring discard_granularity/alignment into line with SCSI mmc: queue: append partition subname to queue thread name mmc: core: make erase timeout calculation allow for gated clock mmc: block: switch card to User Data Area when removing the block driver mmc: sdio: reset card during power_restore mmc: cb710: fix #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS mmc: sdhi: DMA slave ID 0 is invalid mmc: tmio: fix regression in TMIO_MMC_WRPROTECT_DISABLE handling mmc: omap_hsmmc: use original sg_len for dma_unmap_sg mmc: omap_hsmmc: fix ocr mask usage mmc: sdio: fix runtime PM path during driver removal mmc: Add PCI fixup quirks for Ricoh 1180:e823 reader mmc: sdhi: fix module unloading mmc: of_mmc_spi: add NO_IRQ define to of_mmc_spi.c mmc: vub300: fix null dereferences in error handling
| * mmc: queue: bring discard_granularity/alignment into line with SCSIAdrian Hunter2011-06-251-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | SCSI defines discard alignment as the offset to the first optimal discard. In the case of SD/MMC, that is always zero which is the default. SCSI defines discard granularity as a hint of a optimal discard size. That is much better expressed by the MMC "preferred erase size" (pref_erase) field. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: queue: append partition subname to queue thread nameAdrian Hunter2011-06-253-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For example, an eMMC with 2 boot partitions will have 3 threads. The names change from: 40 ? 00:00:00 mmcqd/0 41 ? 00:00:00 mmcqd/0 42 ? 00:00:00 mmcqd/0 to: 40 ? 00:00:00 mmcqd/0 41 ? 00:00:00 mmcqd/0boot0 42 ? 00:00:00 mmcqd/0boot1 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: core: make erase timeout calculation allow for gated clockAdrian Hunter2011-06-251-1/+1
| | | | | | | | | | | | | | | | | | The erase timeout calculation may depend on clock rate which is zero if the clock is gated, so use mmc_host_clk_rate() which allows for that case. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: block: switch card to User Data Area when removing the block driverAdrian Hunter2011-06-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | The MMC block driver and other drivers (e.g. mmc-test) will expect the card to be switched to the User Data Area eMMC partition when they start. Hence the MMC block driver should ensure it is that way when it is removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: sdio: reset card during power_restoreDaniel Drake2011-06-251-0/+39
| | | | | | | | | | | | | | | | | | mmc_sdio_power_restore() skips some steps that are performed in other power-related codepaths which are necessary to fully reset the card. Without this, runtime PM fails for SD8686 SDIO wifi on OLPC XO-1.5. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: cb710: fix #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESSJames Hogan2011-06-251-1/+1
| | | | | | | | | | | | | | | | | | HAVE_EFFICIENT_UNALIGNED_ACCESS is a config option, therefore it needs the CONFIG_ before it when used by the preprocessor. Signed-off-by: James Hogan <james@albanarts.com> Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: sdhi: DMA slave ID 0 is invalidGuennadi Liakhovetski2011-06-251-1/+1
| | | | | | | | | | | | | | | | Don't try to allocate DMA resources if the platform didn't specify positive DMA slave IDs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: tmio: fix regression in TMIO_MMC_WRPROTECT_DISABLE handlingGuennadi Liakhovetski2011-06-251-2/+2
| | | | | | | | | | | | | | | | | | | | Commit b6147490e6aac82 ("mmc: tmio: split core functionality, DMA and MFD glue") broke handling of the TMIO_MMC_WRPROTECT_DISABLE flag by the tmio-mmc driver. This patch restores the original behaviour. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: omap_hsmmc: use original sg_len for dma_unmap_sgPer Forlin2011-06-251-2/+3
| | | | | | | | | | | | | | | | | | | | Don't use the returned sg_len from dma_map_sg() as inparameter to dma_unmap_sg(). Use the original sg_len for both dma_map_sg and dma_unmap_sg according to the documentation in DMA-API.txt. Signed-off-by: Per Forlin <per.forlin@linaro.org> Reviewed-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: omap_hsmmc: fix ocr mask usageAnand Gadiyar2011-06-251-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OMAP HSMMC driver uses an ocr_mask to determine the list of voltages supported by the card. It populates this mask based on the list of voltages supported by the regulator that supplies the voltage. Commit 64be97822b (omap4 hsmmc: Update ocr mask for MMC2 for regulator to use) passed a fixed ocr_mask from the OMAP4 SDP board file to limit the voltage to 2.9-3.0 Volts, and updated the driver to use this mask if provided, instead of using the regulator's supported voltages. However the commit is buggy - the ocr_mask is overridden by the regulator's capabilities anyway. Fix this. (The bug shows up when a system-wide suspend is attempted on the OMAP4 SDP/Blaze platforms. The eMMC card comes up at 3V, but drops to 1.65V after the system resumes). Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Balaji T K <balajitk@ti.com> Acked-by: Venkatraman S <svenkatr@ti.com> Tested-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * mmc: sdio: fix runtime PM path during driver removalOhad Ben-Cohen2011-06-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit e1866b3 "PM / Runtime: Rework runtime PM handling during driver removal" was introduced, the driver core stopped incrementing the runtime PM usage counter of the device during the invocation of the ->remove() callback. This indirectly broke SDIO's runtime PM path during driver removal, because no one calls _put_sync() anymore after ->remove() completes. This means that the power of runtime-PM-managed SDIO cards is kept high after their driver is removed (even if it was powered down beforehand). Fix that by directly calling _put_sync() when the last usage counter is downref'ed by the SDIO bus. Reported-and-tested-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
OpenPOWER on IntegriCloud