summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* viafb: remove LVDS initializationFlorian Tobias Schandinat2009-09-231-2/+1
| | | | | | | | | | | | | | | | | | | | | At least for VX800 this initialization is not very good as some parts of the register are written with reserved values. This makes the display go white in some configurations and not usable until the framebuffer is removed. It's better to not initialize it as it allows to use a previously (by BIOS) correctly configured display. This patch makes some displays work but might cause problems on others. This is bad but can not be easily avoided. If this causes some regressions it's probably the best to fix it in the 'active' display setup code. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Harald Welte <laforge@gnumonks.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* viafb: remove unused video device stuffFlorian Tobias Schandinat2009-09-233-88/+1
| | | | | | | | | | | | | | | | Remove everything related to video devices from the driver as it did not influence the driver operation. This patch does change the userspace behaviour as it removes two IOCTLs and one module parameter. But this is good as it removes useless stuff and helps the user to figure out the options that do affect the driver behaviour (which are still too many). Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Harald Welte <laforge@gnumonks.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* viafb: clean up virtual memory handlingFlorian Tobias Schandinat2009-09-234-22/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean the handling of ioremapped video memory up. The following changes were made: info->screen_base - viafb_FB_MM (VRAM offset calculation) was replaced by info->fix.smem_start - viafbinfo->fix.smem_start which is essentially the same calculation but done with physical instead virtual addresses. *->fbmem_virt was replaced by viafbinfo->screen_base This is true for viafbinfo and viafbinfo1 as the par pointers are equal. An early initialization of viafbinfo1->fix.smem* was removed as done later in viafb_setup_fixinfo. This patch highlights that the only usage of the ioremapped video memory in the driver is for hardware cursor handling. Even if it has to hold the used virtual screen mapped for old-fashioned read/write calls (vs. mmap'ed) a lot virtual memory could be saved by only ioremapping on demand. Code cleanup, no runtime changes expected. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Harald Welte <laforge@gnumonks.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* viafb: clean up duoviewFlorian Tobias Schandinat2009-09-232-17/+2
| | | | | | | | | | | | | | Clean the duoview handling up by replacing the varible with the funtion in the only place where it is used. This is a code cleanup only, no runtime change expected. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Harald Welte <laforge@gnumonks.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* viafb: remove duplicated mode informationFlorian Tobias Schandinat2009-09-232-54/+9
| | | | | | | | | | | | | | | | | Remove the mode information from viafbdev.c and uses the one of viamode.c instead. This is possible because horizontal and vertical address are the same as horizontal and vertical resolution. The reduced blanking modes in the table are no problem because they have a higher index than the normal modes and therefore always the normal modes are selected just as the old behaviour. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Harald Welte <laforge@gnumonks.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* viafb: clean up viamode.hFlorian Tobias Schandinat2009-09-232-116/+32
| | | | | | | | | | | | | | | Remove unneeeded declarations from the header and makes it more maintainable by evaluating the array size in the file the array exist in and exporting it via variables. This removes the need to keep the array size in the header in sync with the real array size. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Harald Welte <laforge@gnumonks.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* viafb: fix ioremap_nocache error handlingFlorian Tobias Schandinat2009-09-231-1/+5
| | | | | | | | | | | | | | | | Correct the returned error code for remapping the video framebuffer. Introduce error handling for remapping MMIO register address space to avoid a NULL pointer dereference. Disable hardware acceleration if remapping MMIO register address space failed as those registers are only used for hardware acceleration. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Harald Welte <laforge@gnumonks.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* viafb: split viafb_set_start_addr upFlorian Tobias Schandinat2009-09-233-72/+26
| | | | | | | | | | | | | | | | | | | | | | | | | Move individual start address setting to viafb_set_primary_address and viafb_set_secondary_address and make it more flexible to reuse it for panning. Using central functions makes it easier to follow HW manipulations. Remove crt locking as it should be only needed for timing manipulation. Move iga_path manipulation to via_pci_probe. Remove memset for screen cleaning as it is currently done only for the second screen. This is not needed for normal operation but has a little chance of causing unwanted display artifacts. This can be fixed later more consistent and more efficient (using viafb_fillrect) if needed. This is a code clenup, no notable runtime changes expected. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Harald Welte <laforge@gnumonks.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* viafb: merge viafb_update_viafb_par in viafb_update_fixFlorian Tobias Schandinat2009-09-233-49/+15
| | | | | | | | | | | | | | | | | | Shrink and merge viafb_update_viafb_par. This removes a lot of duplicated data in viafb_par. Use the relevant data of fb_info instead. On the way it removes an inconsistency in handling a second framebuffer which only worked because viafbinfo1->par is modified to point to the same viafb_par as viafbinfo->par. Code cleanup only, no runtime change expected. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Harald Welte <laforge@gnumonks.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* viafb: remove temporary start address settingFlorian Tobias Schandinat2009-09-231-17/+0
| | | | | | | | | | | | | | | | | | | | | | Currently the start address is set to an initial value every time viafb_setmode is called. This is not done consistently along graphic cores and not even the whole address but often only parts of it. On top of that it seems useless as the real/final address will be set by viafb_set_start_addr a few lines later. Remove this superfluous initalization to shrink register initalization and as a start to decouple primary and secondary display. Code cleanup, no notable runtime change expected. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Harald Welte <laforge@gnumonks.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* viafb: remove duplicated CX700 register initFlorian Tobias Schandinat2009-09-233-66/+1
| | | | | | | | | | | | | | | | | | The current code initializes the register for CX700 chips 2 times due to a missing break as discovered by Harald Welte. As CX700 and VX800 have exactly the same register initialization we can use one for both to avoid duplicated code. As this is a pure code cleanup no measurable runtime effects are expected. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Harald Welte <laforge@gnumonks.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ep93xx video driverRyan Mallon2009-09-234-0/+793
| | | | | | | | | | | | EP93xx video driver plus documentation. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Daniele Venzano <linux@brownhat.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ep93xx video driver platform supportRyan Mallon2009-09-235-1/+183
| | | | | | | | | | Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Daniele Venzano <linux@brownhat.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sisfb: read buffer overflowRoel Kluin2009-09-231-2/+2
| | | | | | | | | | | If called with mode_idx = 1, rate = 68, a read occurs from sisfb_vrate[-1].refresh. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* davinci-fb-frame-buffer-driver-for-ti-da8xx-omap-l1xx-v4Sudhakar Rajashekhara2009-09-232-43/+21
| | | | | | | | | | | | | Since the previous version, return values in ioctl() function have been modified. [akpm@linux-foundation.org: simplify lcd_disable_raster()] Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Steve Chen <schen@mvista.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* davinci: fb: Frame Buffer driver for TI DA8xx/OMAP-L1xxSudhakar Rajashekhara2009-09-234-0/+1027
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add LCD controller (LCDC) driver for TI's DA8xx/OMAP-L1xx architecture. LCDC specifications can be found at http://www.ti.com/litv/pdf/sprufm0a. LCDC on DA8xx consists of two independent controllers, the Raster Controller and the LCD Interface Display Driver (LIDD) controller. LIDD further supports character and graphic displays. This patch adds support for the graphic display (Sharp LQ035Q3DG01) found on the DA830 based EVM. The EVM details can be found at: http://support.spectrumdigital.com/boards/dskda830/revc/. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Steve Chen <schen@mvista.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> DESC davinci-fb-frame-buffer-driver-for-ti-da8xx-omap-l1xx-fix EDESC From: Andrew Morton <akpm@linux-foundation.org> fix kconfig indenting Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Cc: Steve Chen <schen@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* platinumfb: fix misplaced parenthesisRoel Kluin2009-09-231-4/+8
| | | | | | | | | | | | | | Since `+' has a higher precedence than the trinary operator `?', this added `hres * (1 << color_mode)' to the boolean testing videomode and depth. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: framebuffer support for HTC DreamPavel Machek2009-09-2315-0/+5727
| | | | | | | | | | | | | | | | | | | | Add a framebuffer driver for Qualcomm MSM/QSD SoCs, tested on HTC Dream smartphone (aka T-Mobile G1, aka ADP1). Brian said: I did the original quick and dirty version for bringup. Rebecca took over and (re)wrote the bulk of the driver, getting things stable for production ship of Dream and Sapphire, and Dima is currently adding support for later Qualcomm chipsets (QSD8x50, etc). Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Rebecca Schultz Zavin <rebecca@android.com> Cc: Dima Zavin <dima@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atyfb: coding style cleanupVille Syrjala2009-09-231-371/+458
| | | | | | | | | | Fix a bunch of coding style problems in atyfb_base.c. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Cc: "H Hartley Sweeten" <hartleys@visionengravers.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: HWA742: fix pointer to be constImre Deak2009-09-231-1/+1
| | | | | | | | | | Fixes the following: warning: assignment discards qualifiers from pointer target type Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: add FB manual update option to KconfigImre Deak2009-09-231-19/+30
| | | | | | | | | | Also move the controller specific options up in the menu, to a more logical spot. Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: fix coding style / remove dead linearun c2009-09-232-5/+4
| | | | | | | | | | | | | | | - use __iomem type attribute where appropriate - expand (a ? : b) to (a ? a : b) As suggested by Russel King <linux@arm.linux.org.uk> - remove a dead line from omapfb_main.c Signed-off-by: Arun C <arunedarath@mistralsolutions.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: suspend/resume only if FB device is already initializedJouni Hogander2009-09-231-3/+4
| | | | | | | | | | | | Check wether fbdev is NULL in suspend / resume functions. Fbdev is NULL, if there is no lcd or it is not enabled in configuration. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: dispc: allow multiple external IRQ handlersDaniel Stone2009-09-233-42/+67
| | | | | | | | | | | | | | | | | Previously, the only external (to dispc.c) IRQ handler was RFBI's frame done handler. dispc's IRQ framework was very dumb: you could only have one handler, and the semantics of {request,free}_irq were odd, to say the least. The new framework allows multiple consumers to register arbitrary IRQ masks. Signed-off-by: Daniel Stone <daniel.stone@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: dispc: enable wake up capabilityJouni Hogander2009-09-231-2/+2
| | | | | | | | | | | | | Without wakeup enable omap doesn't wake up on dispc interrupts. This causes problems in a case where mpu is in sleep state and dispc interrupt fires. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: dispc: disable iface clocks along with func clocksJouni Hogander2009-09-231-13/+10
| | | | | | | | | | | | | | | | Leaving interface clocks enabled causes dss pwrdm to stay in active state when mpu is in active state. This fix puts dss to sleep state when it is not needed. Earlier version broke framebuffer on 24xx. This is fixed by enabling clocks before trying to access DISPC_IRQSTATUS register. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: dispc: various typo fixesImre Deak2009-09-231-4/+4
| | | | | | | | | | | | | | | - value and register offset was swapped in a dispc write - DISPC_CONTROL register was used instead of DISPC_SYSCONFIG - FIFO size bit field had incorrect length for OMAP3 Fixed-by: arun <arunedarath@mistralsolutions.com> Fixed-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> Fixed-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* N770: enable LCD MIPI-DCS in KconfigImre Deak2009-09-231-1/+1
| | | | | | | Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: add support for rotation on the Blizzard LCD ctrlRodrigo Vivi2009-09-232-19/+124
| | | | | | | | | | | | | | | | The LCD controller (EPSON S1D13744) supports rotation (0, 90, 180 and 270 degrees) on hardware just setting the bits 0 and 1 of 0x28 register (LCD Panel Configuration Register). Now it is possible to use this caps only setting the angle degree on var rotate of fb_var_screeninfo using the FBIOPUT_VSCREENINFO ioctl. Fixed-by: Siarhei Siamashka <siarhei.siamashka@nokia.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@openbossa.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: add support for the ZOOM MDK LCDStanley.Miao2009-09-234-2/+257
| | | | | | | | | | | | | | | | | | | Add glue to control the OMAP_LDP LCD as a frame buffer device using the existing dispc.c driver under omapfb. Patch updated for mainline kernel. Note that the drivers/video/omap should be updated to pass omap_lcd_config in platform_data. The patch should also be updated to compile if twl4030 is not selected, and eventually to use the regulator framework. Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com> Fixed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: add support for the Gumstix Overo LCDSteve Sakoman2009-09-233-0/+201
| | | | | | | | | Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: add support for the OMAP3 Beagle DVI outputKoen Kooi2009-09-233-1/+177
| | | | | | | | | | | | | | | | | The default resolution is 1024x768@24bit This version addresses the comments from Felipe Balbi adn Arun Edarath Fixed-by: Felipe Contreras <felipe.contreras@gmail.com> Fixed-by: Steve Sakoman <steve@sakoman.com> Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com> Fixed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Koen Kooi <koen@openembedded.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: add support for the OMAP3 EVM LCDSteve Sakoman2009-09-232-0/+193
| | | | | | | | | | | | | | | | Add LCD support for OMAP3 EVM Backlight support by Arun C <arunedarath@mistralsolutions.com> Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com> Fixed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Steve Sakoman <steve@sakoman.com> Acked-by: Syed Mohammed Khasim <khasim@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: add support for the 3430SDP LCDKevin Hilman2009-09-233-6/+47
| | | | | | | | | | | | | | | | The 3430SDP uses the same panel as the 2430SDP. The main difference are in the GPIO lines used for panel enable and backlight, and the VAUX register/commands sent to the TWL4030 power subsystem. Also, some misc. whitespace cleanups. Fixed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@mvsita.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: add support for the OMAP2EVM LCDarun c2009-09-232-0/+192
| | | | | | | | | | | | | omap2evm LCD supports VGA and QVGA resolution, by default its in VGA mode. Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com> Fixed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Arun C <arunedarath@mistralsolutions.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: add support for the 2430SDP LCDHunyue Yau2009-09-232-0/+199
| | | | | | | | | | | | | | | | | | Add glue to control the 2430SDP LCD as a frame buffer device using the existing dispc.c driver under omapfb. Fixed-by: Kevin Hilman <khilman@mvista.com> Fixed-by: Sergio Aguirre <saaguirre@ti.com> Fixed-by: Francisco Alecrim <francisco.alecrim@indt.org.br> Fixed-by: Tony Lindgren <tony@atomide.com> Fixed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Hunyue Yau <hyau@mvista.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: add support for the Amstrad Delta LCDJonathan McDowell2009-09-232-0/+138
| | | | | | | | | | | | | This is an updated version of the LCD driver for the Amstrad Delta to take into account the recent changes to the omapfb infrastructure. The Delta features a 480x320 12 bit DSTN panel. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: add support for MIPI-DCS compatible LCDsImre Deak2009-09-234-0/+639
| | | | | | | | | | | | | Fixed-by: Mike Wege <ext-mike.wege@nokia.com> Fixed-by: Arnaud Patard <arnaud.patard@rtp-net.org> Fixed-by: Timo Savola <tsavola@movial.fi> Fixed-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Fixed-by: Trilok Soni <soni.trilok@gmail.com> Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omapfb: add support for the Apollon LCDKyungmin Park2009-09-232-0/+140
| | | | | | | | Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: gpio support for ADP5520/ADP5501 MFD PMICsMichael Hennerich2009-09-233-0/+217
| | | | | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpiolib: allow poll() on valueDaniel Glöckner2009-09-233-5/+211
| | | | | | | | | | | | | | | | | | | | | | | Many gpio chips allow to generate interrupts when the value of a pin changes. This patch gives usermode application the opportunity to make use of this feature by calling poll(2) on the /sys/class/gpio/gpioN/value sysfs file. The edge to trigger can be set in the edge file in the same directory. Possible values are "none", "rising", "falling", and "both". Using level triggers is not possible with current sysfs since nothing changes the GPIO value (and the IRQ keeps triggering). Edge triggering will "just work". Note that if there was an event between read() and poll(), the poll() returns immediately. Also note that this version only supports true GPIO interrupts. Some later patch might be able to synthesize this behavior by timer-driven polling; some systems seem to need that. [dbrownell@users.sourceforge.net: align ids to 16 bit ids; whitespace] Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: include <linux/gpio.h> not <asm/gpio.h>H Hartley Sweeten2009-09-234-9/+4
| | | | | | | | | Drivers should be including <linux/gpio.h> not <asm/gpio.h>. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: pca953x: add support for MAX7315Alek Du2009-09-231-0/+1
| | | | | | | | | | | MAX7315 is pin and software compatible with PCA9534, so add it to the I2C device ID table of pca953x driver. http://www.datasheetcatalog.org/datasheet/maxim/MAX7315.pdf Signed-off-by: Alek Du <alek.du@intel.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add Intel Moorestown Platform Langwell chip gpio driverAlek Du2009-09-233-0/+304
| | | | | | | | | | | | The Langwell chip is the IO hub for Intel Moorestown platform which has a 64-pin gpio block device inside. It is exposed as a dedicated PCI device. We use it to control outside peripheral as well as to do IRQ demuxing. The gpio block uses MSI to send level type interrupt to IOAPIC. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mfd/gpio: add a GPIO interface to the UCB1400 MFD chip driver via gpiolibMarek Vasut2009-09-235-4/+184
| | | | | | | | | Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Brownell <david-b@pacbell.net> Cc: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add MC33880 driverRichard Röjfors2009-09-234-0/+214
| | | | | | | | | A GPIO driver for the Freescale MC33880 High/Low side switch Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpiolib: allow exported GPIO nodes to be named using sysfs linksJani Nikula2009-09-234-0/+74
| | | | | | | | | | | | | | | | | | Commit 926b663ce8215ba448960e1ff6e58b67a2c3b99b (gpiolib: allow GPIOs to be named) already provides naming on the chip level. This patch provides more flexibility by allowing multiple names where ever in sysfs on a per GPIO basis. Adapted from David Brownell's comments on a similar concept: http://lkml.org/lkml/2009/4/20/203. [randy.dunlap@oracle.com: fix build for CONFIG_GENERIC_GPIO=n] Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Acked-by: David Brownell <david-b@pacbell.net> Cc: Daniel Silverstone <dsilvers@simtec.co.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add boot_timesource sysfs attributeMatthew Garrett2009-09-232-0/+16
| | | | | | | | | | | | | | | | CONFIG_RTC_HCTOSYS allows the kernel to read the system time from the RTC at boot and resume, avoiding the need for userspace to do so. Unfortunately userspace currently has no way to know whether this configuration option is enabled and thus cannot sensibly choose whether to run hwclock itself or not. Add a hctosys sysfs attribute which indicates whether a given RTC set the system clock. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: document the sysfs interfaceMatthew Garrett2009-09-231-0/+22
| | | | | | | | | | | | The sysfs interface to the RTC class drivers is currently undocumented. Add some basic documentation defining the semantics of the fields. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: at91rm9200 fixesDavid Brownell2009-09-231-9/+15
| | | | | | | | | | | | | | | | Fix two new-ish runtime warnings in the at91rm9200 (etc) RTC: Platform driver 'at91_rtc' needs updating - please use dev_pm_ops ... by just switching IRQ 1/at91_rtc: IRQF_DISABLED is not guaranteed on shared IRQs ... no longer needed now that rtc_update_irq() changed Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud