summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entryNilesh Javali2012-02-292-1/+195
| | | | | | | | | | | For offload iSCSI like qla4xxx CHAP entries are stored in FLASH. This patch adds support to list CHAP entries stored in FLASH and delete specified CHAP entry from FLASH using iscsi tools. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entryNilesh Javali2012-02-293-1/+133
| | | | | | | | | | | For offload iSCSI like qla4xxx CHAP entries are stored in FLASH. This patch adds support to list CHAP entries stored in FLASH and delete specified CHAP entry from FLASH using iscsi tools. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] pm8001: fix endian issue with code optimization.Santosh Nayak2012-02-293-46/+49
| | | | | | | | | | | | 1. Fix endian issue. 2. Fix the following warning : " drivers/scsi/pm8001/pm8001_hwi.c:2932:32: warning: comparison between ‘enum sas_device_type’ and ‘enum sas_dev_type’". 3. Few code optimization. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] pm8001: Fix possible racing condition.Santosh Nayak2012-02-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a possble racing scenario. 'process_oq' is called by two routines, as shown below. pm8001_8001_dispatch = { ....... .isr = pm8001_chip_isr --> process_oq,// A .isr_process_oq = process_oq, // B ..... } process_oq() --> process_one_iomb() --> mpi_sata_completion() In 'mpi_sata_completion', "pm8001_ha->lock" is first released. It means lock is taken before, which is true for the context A, as 'pm8001_ha->lock' is taken in 'pm8001_chip_isr()' But for context B there is no lock taken before and pm8001_ha->lock is unlocked in 'mpi_sata_completion()'. This may unlock the lock taken in context A. Possible racing ?? If 'pm8001_ha->lock' is taken in 'process_oq()' instead of 'pm8001_chip_isr' then the above issue can be avoided. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] pm8001: Fix bogus interrupt state flag issue.Santosh Nayak2012-02-291-30/+28
| | | | | | | | | | | | | | | | | | | | | Static checker is giving following warning: " error: calling 'spin_unlock_irqrestore()' with bogus flags" The code flow is as shown below: process_oq() --> process_one_iomb --> mpi_sata_completion In 'mpi_sata_completion' the first call for 'spin_unlock_irqrestore()' is with flags=0, which is as good as 'spin_unlock_irq()' ( unconditional interrupt enabling). So for better performance 'spin_unlock_irqrestore()' can be replaced with 'spin_unlock_irq()' and 'spin_lock_irqsave()' can be replaced by 'spin_lock_irq()'. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] ipr: update PCI ID definitions for new adaptersWayne Boyer2012-02-292-9/+9
| | | | | | | | | This patch updates some PCI ID definitions for new adapters based on the next generation 64 bit IOA PCI interface chip. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla2xxx: handle default case in qla2x00_request_firmware()Dan Carpenter2012-02-291-1/+2
| | | | | | | | | This silences a static checker warning. Also we're always adding new types of firmware, so it might fix a bug in real life some day. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: improvements in driver unloading routineAndrzej Jakowski2012-02-291-1/+2
| | | | | | | | | | | This patch fixes scenario where driver removal should be possible only when driver is in READY state. Also it removes redundant invocation of routine disabling SCU interrupts - this method is called somewhere else in driver deinitialization path. Signed-off-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: improve phy event warningsDan Williams2012-02-291-52/+71
| | | | | | | | | | | | isci occasionally spews messages like: isci 0000:03:00.0: sci_phy_event_handler: PHY starting substate machine received unexpected event_code b3940000 ...which is not very helpful, since we don't know which controller, which phy, the exact state, or a decode of the event. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: debug, provide state-enum-to-string conversionsDan Williams2012-02-2910-520/+432
| | | | | | | | Debugging the driver requires tracing the state transtions and tracing state names is less work than decoding numbers. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] scsi_transport_sas: 'enable' phys on resetDan Williams2012-02-291-0/+1
| | | | | | | | If userspace requests a phy reset, treat that as a request for the phy to be enabled since that is the effect on hardware. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: don't recover end devices attached to disabled physDan Williams2012-02-294-5/+8
| | | | | | | | | | | | | | | | | | If userspace has decided to disable a phy the kernel should honor that and not inadvertantly re-enable the phy via error recovery. This is more straightforward in the sata case where link recovery (via libata-eh) is separate from sas_task cancelling in libsas-eh. Teach libsas to accept -ENODEV as a successful response from I_T_nexus_reset ('successful' in terms of not escalating further). This is a more comprehensive fix then "libsas: don't recover 'gone' devices in sas_ata_hard_reset()", as it is no longer sata-specific. aic94xx does check the return value from sas_phy_reset() so if the phy is disabled we proceed with clearing the I_T_nexus. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: fixup target_port_protocols for expanders that don't report sataDan Williams2012-02-291-0/+2
| | | | | | | | | If discovery returns 0 for target_port_protocols but shows an attached sata device, just report SAS_PROTOCOL_SATA in the identify data so userspace can reliably search for sata devices in the domain. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: set attached device type and target protocols for local physDan Williams2012-02-293-4/+27
| | | | | | | | | | | | | | | | | | | | Before: $ cat /sys/class/sas_phy/phy-6\:3/device_type none $ cat /sys/class/sas_phy/phy-6\:3/target_port_protocols none After: $ cat /sys/class/sas_phy/phy-6\:3/device_type end device $ cat /sys/class/sas_phy/phy-6\:3/target_port_protocols sata Also downgrade the phy_list_lock to _irq instead of _irqsave since libsas will never call sas_get_port_device with interrupts disbled. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: revert ata srstDan Williams2012-02-292-39/+0
| | | | | | | | | | | libata issues follow up srsts when the controller has a hard time recording the signature-fis after a reset, or if the link supports port multipliers. libsas does not support port multipliers and no current libsas lldds appear to need help retrieving the signature fis. Revert it for now to remove confusion. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: fix lifetime of SAS_HA_FROZENDan Williams2012-02-291-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until all sas_tasks are known to no longer be in-flight this flag gates late completions from colliding with error handling. However, it must be cleared prior to the submission of scsi_send_eh_cmnd() requests, otherwise those commands will never be completed correctly. This was spotted by slub debug: ============================================================================= BUG sas_task: Objects remaining on kmem_cache_close() ----------------------------------------------------------------------------- INFO: Slab 0xffffea001f0eba00 objects=34 used=1 fp=0xffff8807c3aecb00 flags=0x8000000000004080 Pid: 22919, comm: modprobe Not tainted 3.2.0-isci+ #2 Call Trace: [<ffffffff810fcdcd>] slab_err+0xb0/0xd2 [<ffffffff810e1c50>] ? free_percpu+0x31/0x117 [<ffffffff81100122>] ? kzalloc+0x14/0x16 [<ffffffff81100122>] ? kzalloc+0x14/0x16 [<ffffffff81100486>] kmem_cache_destroy+0x11d/0x270 [<ffffffffa0112bdc>] sas_class_exit+0x10/0x12 [libsas] [<ffffffff81078fba>] sys_delete_module+0x1c4/0x23c [<ffffffff814797ba>] ? sysret_check+0x2e/0x69 [<ffffffff8126479e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81479782>] system_call_fastpath+0x16/0x1b INFO: Object 0xffff8807c3aed280 @offset=21120 INFO: Allocated in sas_alloc_task+0x22/0x90 [libsas] age=4615311 cpu=2 pid=12966 __slab_alloc.clone.3+0x1d1/0x234 kmem_cache_alloc+0x52/0x10d sas_alloc_task+0x22/0x90 [libsas] sas_queuecommand+0x20e/0x230 [libsas] scsi_send_eh_cmnd+0xd1/0x30c scsi_eh_try_stu+0x4f/0x6b scsi_eh_ready_devs+0xba/0x6ef sas_scsi_recover_host+0xa35/0xab1 [libsas] scsi_error_handler+0x14b/0x5fa kthread+0x9d/0xa5 kernel_thread_helper+0x4/0x10 Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: async ata scanningDan Williams2012-02-2914-66/+123
| | | | | | | | | | | | | | | | | | libsas ata error handling is already async but this does not help the scan case. Move initial link recovery out from under host->scan_mutex, and delay synchronization with eh until after all port probe/recovery work has been queued. Device ordering is maintained with scan order by still calling sas_rphy_add() in order of domain discovery. Since we now scan the domain list when invoking libata-eh we need to be careful to check for fully initialized ata ports. Acked-by: Jack Wang <jack_wang@usish.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: restore scan orderDan Williams2012-02-294-50/+32
| | | | | | | | | | | ata devices are always scanned after ssp. Prior to the ata error handling reworks libsas would tend to scan devices in ascending expander phy order. Restore this ordering by deferring ssp discovery to a DISCE_PROBE event, and keep the probe order consistent with the discovery order, not the placement of sata devices. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: delete device on sas address changedDan Williams2012-02-291-0/+9
| | | | | | | | If the phy is attached to a new sas address unregister the first address before processing the new attachment. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: let libata recover links that fail to transmit initial sig-fisDan Williams2012-02-296-89/+179
| | | | | | | | | | | | | | | | libsas fails to discover all sata devices in the domain. If a device fails negotiation and does not transmit a signature fis the link needs recovery. libata already understands how to manage slow to come up links, so treat these conditions as ata device attach events for the purposes of creating an ata_port. This allows libata to manage retrying link bring up. Rediscovery is modified to be careful about checking changes in dev_type. It looks like libsas leaks old devices if the sas address changes, but that's a fix for another patch. Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: fix sas port namingDan Williams2012-02-291-1/+1
| | | | | | | | | | Make sas-port naming consistent with the expander-attached case whereby the phy-id is the last digit in the port name. Otherwise we get the random behavior of the allocation order. Reported-by: Patrick Thomson <patrick.s.thomson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: improve debug statementsDan Williams2012-02-292-32/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's difficult to determine which domain_device is triggering error recovery, so convert messages like: sas: ex 5001b4da000e703f phy08:T attached: 5001b4da000e7028 sas: ex 5001b4da000e703f phy09:T attached: 5001b4da000e7029 ... ata7: sas eh calling libata port error handler ata8: sas eh calling libata port error handler ...into: sas: ex 5001517e85cfefff phy05:T:9 attached: 5001517e85cfefe5 (stp) sas: ex 5001517e3b0af0bf phy11:T:8 attached: 5001517e3b0af0ab (stp) ... sas: ata7: end_device-21:1: dev error handler sas: ata8: end_device-20:0:5: dev error handler which shows attached link rate, device type, and associates a domain_device with its ata_port id to correlate messages emitted from libata-eh. As Doug notes, we can also take the opportunity to clarify expander phy routing capabilities. [dgilbert@interlog.com: clarify table2table with 'U'] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: kill spurious sas_put_deviceMaciej Trela2012-02-291-2/+0
| | | | | | | | | | | | Holdover from a patch rework, prior to the addition of SAS_DEV_DESTROY we were holding a reference while the destruct was pending in case the domain was torn down before the desctruct event ran. That case is covered by SAS_DEV_DESTROY, and the sas_put_device() just corrupts freed memory, or worse frees the memory while another agent holds a reference. Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: fix sas_unregister_ports vs sas_drain_workDan Williams2012-02-293-13/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to hold drain_mutex across the unregistration as port down events queue device removal as chained events, so we need to make sure no other drainers are active. [ 1118.673968] WARNING: at kernel/workqueue.c:996 __queue_work+0x11a/0x326() [ 1118.681982] Hardware name: S2600CP [ 1118.686193] Modules linked in: isci(-) libsas scsi_transport_sas nls_utf8 ipv6 uinput sg iTCO_wdt iTCO_vendor_support i2c_i801 i2c_core ioatdma dca sd_mod sr_mod cdrom ahci libahci libata [last unloaded: scsi_transport_sas] [ 1118.709893] Pid: 6831, comm: rmmod Not tainted 3.2.0-isci+ #1 [ 1118.716727] Call Trace: [ 1118.719867] [<ffffffff8103e9f5>] warn_slowpath_common+0x85/0x9d [ 1118.727000] [<ffffffff8103ea27>] warn_slowpath_null+0x1a/0x1c [ 1118.733942] [<ffffffff81056d44>] __queue_work+0x11a/0x326 [ 1118.740481] [<ffffffff81056f99>] queue_work_on+0x1b/0x22 [ 1118.746925] [<ffffffff81057106>] queue_work+0x37/0x3e [ 1118.753105] [<ffffffffa0120e05>] ? sas_discover_event+0x55/0x82 [libsas] [ 1118.761094] [<ffffffff813217c3>] scsi_queue_work+0x42/0x44 [ 1118.767717] [<ffffffffa0120e19>] sas_discover_event+0x69/0x82 [libsas] [ 1118.775509] [<ffffffffa0120f5b>] sas_unregister_dev+0xc3/0xcc [libsas] [ 1118.783319] [<ffffffffa0120fae>] sas_unregister_domain_devices+0x4a/0xc8 [libsas] [ 1118.792731] [<ffffffffa0120071>] sas_deform_port+0x60/0x1a6 [libsas] [ 1118.800339] [<ffffffffa01201ea>] sas_unregister_ports+0x33/0x44 [libsas] [ 1118.808342] [<ffffffffa011f7e5>] sas_unregister_ha+0x41/0x6b [libsas] [ 1118.816055] [<ffffffffa0134055>] isci_unregister+0x22/0x4d [isci] [ 1118.823384] [<ffffffffa0143040>] isci_pci_remove+0x2e/0x60 [isci] Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: route local link resets through ata-ehDan Williams2012-02-293-20/+37
| | | | | | | | | Similar to the conversion of the transport-class reset we want bsg initiated resets to be managed by libata. Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: fix mixed topology recoveryDan Williams2012-02-293-17/+13
| | | | | | | | | | If we have a domain with sas and sata devices there may still be sas recovery actions to take after peeling off the commands to send to libata. Reported-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: close scsi_remove_target() vs libata-eh raceDan Williams2012-02-293-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ata_port lifetime in libata follows the host. In libsas it follows the scsi_target. Once scsi_remove_device() has caused all commands to be completed it allows scsi_remove_target() to immediately proceed to freeing the ata_port causing bug reports like: [ 848.393333] BUG: spinlock bad magic on CPU#4, kworker/u:2/5107 [ 848.400262] general protection fault: 0000 [#1] SMP [ 848.406244] CPU 4 [ 848.408310] Modules linked in: nls_utf8 ipv6 uinput i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support ioatdma dca sg sd_mod sr_mod cdrom ahci libahci isci libsas libata scsi_transport_sas [last unloaded: scsi_wait_scan] [ 848.432060] [ 848.434137] Pid: 5107, comm: kworker/u:2 Not tainted 3.2.0-isci+ #8 Intel Corporation S2600CP/S2600CP [ 848.445310] RIP: 0010:[<ffffffff8126a68c>] [<ffffffff8126a68c>] spin_dump+0x5e/0x8c [ 848.454787] RSP: 0018:ffff8807f868dca0 EFLAGS: 00010002 [ 848.461137] RAX: 0000000000000048 RBX: ffff8807fe86a630 RCX: ffffffff817d0be0 [ 848.469520] RDX: 0000000000000000 RSI: ffffffff814af1cf RDI: 0000000000000002 [ 848.477959] RBP: ffff8807f868dcb0 R08: 00000000ffffffff R09: 000000006b6b6b6b [ 848.486327] R10: 000000000003fb8c R11: ffffffff81a19448 R12: 6b6b6b6b6b6b6b6b [ 848.494699] R13: ffff8808027dc520 R14: 0000000000000000 R15: 000000000000001e [ 848.503067] FS: 0000000000000000(0000) GS:ffff88083fd00000(0000) knlGS:0000000000000000 [ 848.512899] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 848.519710] CR2: 00007ff77d001000 CR3: 00000007f7a5d000 CR4: 00000000000406e0 [ 848.528072] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 848.536446] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 848.544831] Process kworker/u:2 (pid: 5107, threadinfo ffff8807f868c000, task ffff8807ff348000) [ 848.555327] Stack: [ 848.557959] ffff8807fe86a630 ffff8807fe86a630 ffff8807f868dcd0 ffffffff8126a6e0 [ 848.567072] ffffffff817c142f ffff8807fe86a630 ffff8807f868dcf0 ffffffff8126a703 [ 848.576190] ffff8808027dc520 0000000000000286 ffff8807f868dd10 ffffffff814af1bb [ 848.585281] Call Trace: [ 848.588409] [<ffffffff8126a6e0>] spin_bug+0x26/0x28 [ 848.594357] [<ffffffff8126a703>] do_raw_spin_unlock+0x21/0x88 [ 848.601283] [<ffffffff814af1bb>] _raw_spin_unlock_irqrestore+0x2c/0x65 [ 848.609089] [<ffffffffa001c103>] ata_scsi_port_error_handler+0x548/0x557 [libata] [ 848.618331] [<ffffffff81061813>] ? async_schedule+0x17/0x17 [ 848.625060] [<ffffffffa004f30f>] async_sas_ata_eh+0x45/0x69 [libsas] [ 848.632655] [<ffffffff810618aa>] async_run_entry_fn+0x97/0x125 [ 848.639670] [<ffffffff81057439>] process_one_work+0x207/0x38d [ 848.646577] [<ffffffff8105738c>] ? process_one_work+0x15a/0x38d [ 848.653681] [<ffffffff810576f7>] worker_thread+0x138/0x21c [ 848.660305] [<ffffffff810575bf>] ? process_one_work+0x38d/0x38d [ 848.667493] [<ffffffff8105b098>] kthread+0x9d/0xa5 [ 848.673382] [<ffffffff8106e1bd>] ? trace_hardirqs_on_caller+0x12f/0x166 [ 848.681304] [<ffffffff814b7704>] kernel_thread_helper+0x4/0x10 [ 848.688324] [<ffffffff814af534>] ? retint_restore_args+0x13/0x13 [ 848.695530] [<ffffffff8105affb>] ? __init_kthread_worker+0x5b/0x5b [ 848.702929] [<ffffffff814b7700>] ? gs_change+0x13/0x13 [ 848.709155] Code: 00 00 48 8d 88 38 04 00 00 44 8b 80 84 02 00 00 31 c0 e8 cf 1b 24 00 41 83 c8 ff 44 8b 4b 08 48 c7 c1 e0 0b 7d 81 4d 85 e4 74 10 <45> 8b 84 24 84 02 00 00 49 8d 8c 24 38 04 00 00 8b 53 04 48 89 [ 848.732467] RIP [<ffffffff8126a68c>] spin_dump+0x5e/0x8c [ 848.738905] RSP <ffff8807f868dca0> [ 848.743743] ---[ end trace 143161646eee8caa ]--- ...so arrange for the ata_port to have the same end of life as the domain device. Reported-by: Marcin Tomczak <marcin.tomczak@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: mark all domain devices gone if root port disappearsDan Williams2012-02-293-6/+8
| | | | | | | | If the top level expander is hot removed, mark all child devices as gone before unregistration to short circuit futile recovery. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: pre-clean commands that won the eh vs completion raceDan Williams2012-02-291-9/+16
| | | | | | | | | | When scrolling forward through the eh list (in a clear_q scenario) it is possible to encounter commands that won the completion vs eh race. Rather than sprinkle more "if (!task)" throughout the handler just make a pass through the list and delete the race winners before handling the rest. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: remove IDEV_EH hack to disable "discovery-time" ata resetsDan Williams2012-02-293-10/+7
| | | | | | | | | | | | Prior to commit 61aaff49 "isci: filter broadcast change notifications during SMP phy resets" we borrowed the MVS_DEV_EH approach from the mvsas driver for preventing ->lldd_I_T_nexus_reset() events during ata discovery. This hack was protecting against the old ->phy_reset() in ata_bus_probe(), but since the conversion to the new error handling this hack is preventing resets from reaching ata devices. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: remove bus and reset handlersDan Williams2012-02-293-27/+0
| | | | | | | | | | | | | | | | | Remove ->eh_device_reset_handler() and ->eh_bus_reset_handler() for the same reason they are not implemented for libata hosts, they cannot be implemented reliably with ata-eh. ATA error recovery wants to divert all resets to the eh thread and wait for completion, these handlers may be invoked from a non-blocking ioctl. The other path they are called from is libsas-eh, and if we escalate past I_T_nexus reset we have larger problems i.e. tear down all in-flight commands in the domain potentially without notification to the lldd if it has chosen not to implement ->lldd_clear_nexus_port() / ->lldd_clear_nexus_ha(). Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: ->lldd_ata_check_ready handlerDan Williams2012-02-293-0/+29
| | | | | | | | Report to libata whether the link to the given domain_device is up and the signature fis has been received. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: stop interpreting ->lldd_lu_reset() as an ata soft-resetDan Williams2012-02-295-286/+15
| | | | | | | | | | | | | Driving resets from libsas-eh is pre-mature as libata will make a decision about performing a softreset. Currently libata determines whether to perform a softreset based on ata_eh_followup_srst_needed(), and none of those conditions apply to isci. Remove the srst implementation and translate ->lldd_lu_reset() for ata devices as a request to drive a reset via libata-eh. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: fix interpretation of "hard" resetDan Williams2012-02-293-21/+37
| | | | | | | | | | | | | A hard reset to isci in the direct-attached case is one where the driver internally manages debouncing the link. In the sas-expander-attached case a hard reset is one that clears affiliations. The driver should not be prematurely dropping affiliations at run time, that decision (to force expander hard resets to ata devices) is left to userspace to manage. So, arrange for I_T_nexus resets to be sas-link-resets in the expander-attached case and isci-hard-resets in the direct-attached case. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: kill isci_port->statusDan Williams2012-02-293-87/+11
| | | | | | | | | | | | | | It only tracks whether the port is stopping in order to gate new devices being discovered while the port is stopping. However, since the check and subsequent handling is unlocked there is nothing to stop the port from going down immediately after the check. Driver is already prepared to handle devices arriving on stale ports, and those will be cleaned up by an eventual ->lldd_dev_gone() notification. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: kill iphy->isci_port lookupsDan Williams2012-02-297-77/+83
| | | | | | | | | | | | | | | | | | | | | | | This field is a holdover from the OS abstraction conversion. The stable phy to port lookups are done via iphy->ownining_port under scic_lock. After this conversion to use port->lldd_port the only volatile lookup is the initial lookup in isci_port_formed(). After that point any lookup via a successfully notified domain_device is guaranteed to be valid until the domain_device is destroyed. Delete ->start_complete as it is only set once and is set as a consequence of the port going link up, by definition of getting a port formed event the port is "ready". While we are correcting port lookups also move the asd_sas_port table out from under the isci_port. This is to preclude any temptation to use container_of() to convert an asd_sas_port to an isci_port, the association is dynamic and under libsas control. Tested-by: Maciej Trela <maciej.trela@intel.com> [dmilburn@redhat.com: fix i686 compile error] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: don't recover 'gone' devices in sas_ata_hard_reset()Dan Williams2012-02-291-0/+3
| | | | | | | | | | | | | | | The commands that timeout when a disk is forcibly removed may trigger libata to attempt recovery of the device. If libsas has decided to remove the device don't permit ata to continue to issue resets to its last known phy. The primary motivation for this patch is hotplug testing by writing 0 to /sys/class/sas_phy/phyX/enable. Without this check this test leads to libata issuing a reset and re-enabling the device that wants to be torn down. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: fix sas_find_local_phy(), take phy referencesDan Williams2012-02-2913-44/+116
| | | | | | | | | | | | | | | | | | | | | | | In the direct-attached case this routine returns the phy on which this device was first discovered. Which is broken if we want to support wide-targets, as this phy reference can become stale even though the port is still active. In the expander-attached case this routine tries to lookup the phy by scanning the attached sas addresses of the parent expander, and BUG_ONs if it can't find it. However since eh and the libsas workqueue run independently we can still be attempting device recovery via eh after libsas has recorded the device as detached. This is even easier to hit now that eh is blocked while device domain rediscovery takes place, and that libata is fed more timed out commands increasing the chances that it will try to recover the ata device. Arrange for dev->phy to always point to a last known good phy, it may be stale after the port is torn down, but it will catch up for wide port reconfigurations, and never be NULL. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: check for 'gone' expanders in smp_execute_task()Dan Williams2012-02-291-0/+5
| | | | | | | | No sense in issuing or retrying commands to an expander that has been removed. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: don't mark expanders as gone when a child device is removedDan Williams2012-02-291-1/+0
| | | | | | | | | | | | | Commit 56dd2c06 "[SCSI] libsas: Don't issue commands to devices that have been hot-removed" marked the parent device of an end-device as gone when all the phys to the end device have been deleted. The expander device is still present until its parent is removed. This is a benign change until the smp_execute_task() path is taught to check ->gone. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: poll for ata device readiness after resetDan Williams2012-02-294-35/+83
| | | | | | | | | | | | | | | | | Use ata_wait_after_reset() to poll for link recovery after a reset. This combined with sas_ha->eh_mutex prevents expander rediscovery from probing phys in an intermediate state. Local discovery does not have a mechanism to filter link status changes during this timeout, so it remains the responsibility of lldds to prevent premature port teardown. Although once all lldd's support ->lldd_ata_check_ready() that could be used as a gate to local port teardown. The signature fis is re-transmitted when the link comes back so we should be revalidating the ata device class, but that is left to a future patch. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: async ata-ehDan Williams2012-02-191-3/+14
| | | | | | | | | Once sas_ata_hard_reset() starts honoring the 'deadline' parameter a pathological configuration could take 25 seconds per ata device (serialized) to recover. Run per-port recoveries in parallel. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: add mutex for SMP task executionJeff Skirvin2012-02-193-28/+34
| | | | | | | | | | SAS does not tag SMP requests, and at least one lldd (isci) does not permit more than one in-flight request at a time. [jejb: fix sas_init_dev tab issues while we're at it] Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: Remove redundant phy state notification calls.Jeff Skirvin2012-02-191-4/+1
| | | | | | | | | | | | | In the case of an explicit sas_phy_enable call to disable a phy, the LLDD provides the calls to sas_phy_disconnected and the PHYE_LOSS_OF_SIGNAL event. NOTE: This assumes that the lldd(s) generate the notification, which appears to be the case, but only verfied on isci. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: sas_phy_enable via transport_sas_phy_resetDan Williams2012-02-194-10/+52
| | | | | | | | Execute the link-reset triggered by sas_phy_enable via transport_sas_phy_reset so that it can be managed by libata. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: execute transport link resets with libata-eh via host workqueueDan Williams2012-02-198-3/+74
| | | | | | | | | | | | | | | | | Link resets leave ata affiliations intact, so arrange for libsas to make an effort to avoid dropping the device due to a slow-to-recover link. Towards this end carry out reset in the host workqueue so that it can check for ata devices and kick the reset request to libata. Hard resets, in contrast, bypass libata since they are meant for associating an ata device with another initiator in the domain (tears down affiliations). Need to add a new transport_sas_phy_reset() since the current sas_phy_reset() is a utility function to libsas lldds. They are not prepared for it to loop back into eh. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: perform sas-transport resets in shost->workq contextDan Williams2012-02-195-4/+90
| | | | | | | | | | Extend the sas transport class to allow transport users to attach extra data to a sas_phy (->hostdata). Use this area in libsas to move resets to workq context in preparation for scheduling ata device resets through libata-eh. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: use libata-eh-reset for sata rediscovery fis transmit failuresDan Williams2012-02-193-6/+63
| | | | | | | | | | | | | | | | | Since sata devices can take several seconds to recover the link on reset the 0.5 seconds that libsas currently waits may not be enough. Instead if we are rediscovering a phy that was previously attached to a sata device let libata handle any resets to encourage the device to transmit the initial fis. Once sas_ata_hard_reset() and lldds learn how to honor 'deadline' libsas should stop encountering phys in an intermediate state, until then this will loop until the fis is transmitted or ->attached_sas_addr gets cleared, but in the more likely initial discovery case we keep existing behavior. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: defer SAS_TASK_NEED_DEV_RESET commands to libataDan Williams2012-02-192-12/+6
| | | | | | | | | | | | | | | lldds use the SAS_TASK_NEED_DEV_RESET interface to request that eh perform a reset. In the sata device case defer the commands that triggered the reset to libata-eh context so it can perform its pre and post reset management. In the sas_ata_post_internal() case the reset request is falling on deaf ears as the sas_task is immediately destroyed without any reset action. Since it is currently a nop, and likely superfluous given the conversion to new-style libata-eh, just drop the request. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: let libata handle command timeoutsDan Williams2012-02-193-3/+23
| | | | | | | | | | | | libsas-eh if it successfully aborts an ata command will hide the timeout condition (AC_ERR_TIMEOUT) from libata. The command likely completes with the all-zero task->task_status it started with. Instead, interpret a TMF_RESP_FUNC_COMPLETE as the end of the sas_task but keep the scmd around for libata-eh to handle. Tested-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
OpenPOWER on IntegriCloud