summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ide-acpi support warning fixAndrew Morton2007-02-071-3/+4
| | | | | | | | | drivers/ide/ide-acpi.c: In function 'ide_acpi_get_timing': drivers/ide/ide-acpi.c:537: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'long unsigned int' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ACPI support for IDE devicesHannes Reinecke2007-02-076-0/+770
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements ACPI integration for generic IDE devices. The ACPI spec mandates that some methods are called during suspend and resume. And consequently there most modern Laptops cannot resume properly without it. According to the spec, we should call '_GTM' (Get Timing) upon suspend to store the current IDE adapter settings. Upon resume we should call '_STM' (Set Timing) to initialize the adapter with the stored settings; afterwards '_GTF' (Get Taskfile) should be called which returns a buffer with some IDE initialisation commands. Those commands should be passed to the drive. There are two module params which control the behaviour of this patch: 'ide=noacpi' Do not call any ACPI methods (Disables any ACPI method calls) 'ide=acpigtf' Enable execution of _GTF methods upon resume. Has no effect if 'ide=noacpi' is set. 'ide=acpionboot' Enable execution of ACPI methods during boot. This might be required on some machines if 'ide=acpigtf' is selected as some machines modify the _GTF information depending on the drive identification passed down with _STM. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* IDE Driver for Delkin/Lexar/etc.. cardbus CF adapterMark Lord2007-02-073-0/+148
| | | | | | | | | | | | | | | | | | | | | | On Thursday 11 January 2007 23:17, Bartlomiej Zolnierkiewicz wrote: > > My working IDE tree (against Linus' tree) now resides here: > > http://kernel.org/pub/linux/kernel/people/bart/pata-2.6/patches/ Bart, here's a driver I've been keeping out-of-tree for the past couple of years. This is for the Delking/Lexar/ASKA/etc.. 32-bit cardbus IDE CompactFlash adapter card. It's probably way out of sync with the latest driver model (??), but it still builds/works. I'm not interested in doing much of a rewrite, other than for libata someday, as I no longer use the card myself. But lots of other people do seem to use it, so it might be nice to see it "in-tree". Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: it8213 IDE driver update (version 2)Bartlomiej Zolnierkiewicz2007-02-071-106/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | * set ATAPI/IORDY/TIME bits correctly in it8213_tuneproc() * fix UDMA/MWDMA/SWDMA masks in it8213_init_hwif() * in it8213_tune_chipset() SWDMA2 mode should be used instead of MWDMA0 * backport various fixes from piix/slc90e66 drivers: - in it8213_tuneproc() the highest possible PIO mode is PIO4 (not PIO5) - clear ATAPI/IORDY/TIME bits before setting them also for slave device - use ->speedproc in it8213_config_drive_for_dma() - don't try to tune PIO in config_chipset_for_pio() - simplify is_slave calculation in it8213_tuneproc() - misc cleanups * fix it8213_ratemask() and it8213_tuneproc() comments * simplify it8213_init_hwif() * remove init_chipset_it8213() * add missing Copyrights and update MODULE_AUTHOR() * CodingStyle cleanups * remove dead code v2: * PCI_DEVICE_ID_ITE_8213 is only defined in -mm kernels, so just use PCI Device ID (0x8213) directly * fix ->ultra_mask incorrectly changed to 0x3f in v1 version of the patch Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add it8213 IDE driverJack Lee2007-02-073-1/+408
| | | | | From: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* tc86c001: add missing __init tag for tc86c001_ide_init()Bartlomiej Zolnierkiewicz2007-02-071-1/+1
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* tc86c001: mark init_chipset_tc86c001() with __devinit tagAndrew Morton2007-02-071-1/+2
| | | | | | | Signed-off-by: Andrew Morton <akpm@osdl.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* tc86c001: init_hwif_tc86c001() can be staticAdrian Bunk2007-02-071-1/+1
| | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add Toshiba TC86C001 IDE driver (take 2)Sergei Shtylyov2007-02-075-0/+333
| | | | | | | | | | | | | | | | | | This is the driver for the Toshiba TC86C001 GOKU-S PCI IDE controller, completely reworked from the original brain-damaged Toshiba's 2.4 version. This single channel UltraDMA/66 controller is very simple in programming, yet Toshiba managed to plant many interesting bugs in it. The particularly nasty "limitation 5" (as they call the errata) caused me to abuse the IDE core in a possibly most interesting way so far. However, this is still better than the #ifdef mess in drivers/ide/ide-io.c that the original version included (well, it had much more mess)... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Alan Cox <alan@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* pdc202xx_new: remove check_in_drive_lists abominationSergei Shtylyov2007-02-072-42/+12
| | | | | | | | | | | Fold check_in_drive_lists() into quirkproc() handler in both PDC202xx drivers-- this function was never called with a list other than pdc_quirk_drives and was a bad example of code overall... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* pdc202xx_new: remove useless codeSergei Shtylyov2007-02-071-28/+3
| | | | | | | | | | | | | | | | | | Remove the following useless fragments from the driver: - the ide_dma_lostirq() and ide_dma_timeout() handlers which boil down to just printing the incoherent reset message and calling their default counterparts; - check for non-NULL drive->id in the ide_dma_check() handler -- this is assumed to be true by all other handlers (also, get rid of unnecessary nesting of the conditional statements there); - the comment before pdcnew_tune_drive() which has nothing to do with the code. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* slc90e66: carry over fixes from piix driverSergei Shtylyov2007-02-071-21/+34
| | | | | | | | | | | | | | | | | | | | Synchronize with version 0.46 of the Intel PIIX/ICH driver: - carry over Alan's and my own fixes in the tuneproc() method and my cleanups both there and in the ratemask() method; - SLC90E66 only supports MW DMA modes 1/2 and SW DMA mode 2 (just like Intel chips), so don't claim support for other MW/SW DMA modes; - don't check dor non-NULL drive->id in the ide_dma_check() method -- this is assumed to be true in all other drivers; - do some coding/formatting cleanups while at it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* piix: tuneproc() fixes/cleanupsSergei Shtylyov2007-02-071-11/+10
| | | | | | | | | | | | | | | | | | | | | Fix/cleanup the driver's tuneproc() and ratemask() methods: - PPE, IE, and TIME bits need to be cleared beforehand for the slave drive as well as master (Alan probably just forgot about it); - this driver only supports PIO modes up to 4, so must pass the correct limit to ide_get_best_pio_mode(); - use min_t() macro instead of min(); - simplify slave vs master drive evaluation; - do come coding and formatting cleanups... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* piix: fix 82371MX enablebitsSergei Shtylyov2007-02-071-2/+8
| | | | | | | | | | | | | | | | | | | | | According to the datasheet, Intel 82371MX (MPIIX) actually has only a single IDE channel mapped to the primary or secondary ports depending on the value of the bit 14 of the IDETIM register at PCI config. offset 0x6C (the register at 0x6F which the driver refers to. doesn't exist). So, disguise the controller as dual channel and set enablebits masks/values such that only either primary or secondary channel is detected enabled. Also, preclude the IDE probing code from reading PCI BARs, this controller just doesn't have them (it's not the separate PCI function like the other PCI controllers), it only decodes the legacy addresses. [ Alan sayeth " MPIIX does not work with or without the change. It needs its own different driver and not to use setup-pci. Huge job and since it works well with libata who cares. Ditto the early PIIX chip." ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* hpt366: HPT36x PCI clock detection fixSergei Shtylyov2007-02-071-2/+6
| | | | | | | | | | | | | | | | | | | Fix minor coding mistake in the HPT36x PCI clock detection code noticed by Bartlomiej Zolnierkiewicz -- it always reported 33 MHz due to the missing 'break' statements. This, however, most probably never mattered -- in fact, I was thinking of removing the 25/40 MHz cases completely since HPT36x BIOSes didn't seem to set any other value than 7 into the 'cmd_high_time' field, i.e. supported only 33 MHz PCI. Note that in the original driver there was another bug: 25 and 40 MHz cases were interchanged. Since the 'cmd_high_time' field is in units of PCI clocks, a lower clock count just *cannot* correspond to a higher frequency, i. e. it should be 5 for 25 MHz PCI and 9 for 40 MHz PCI, not the other way around. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* hpt366: init code rewriteSergei Shtylyov2007-02-071-362/+489
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Finally, rework the driver init. code to correctly handle all the chip variants HighPoint has created so far. This should cure the rest of the timing issues in the driver (especially, on 66 MHz PCI) caused by the HighPoint's habit of switching the base DPLL clock with every new revision of the chips... - switch to using the enumeration type to differ between the numerous chip variants, matching PCI device/revision ID with the chip type early, at the init_setup stage; - extend the hpt_info structure to hold the DPLL and PCI clock frequencies, stop duplicating it for each channel by storing the pointer in the pci_dev structure: first, at the init_setup stage, point it to a static "template" with only the chip type and its specific base DPLL frequency, the highest supported DMA mode, and the chip settings table pointer filled, then, at the init_chipset stage, allocate per-chip instance and fill it with the rest of the necessary information; - get rid of the constant thresholds in the HPT37x PCI clock detection code, switch to calculating PCI clock frequency based on the chip's base DPLL frequency; - switch to using the DPLL clock and enable UltraATA/133 mode by default on anything newer than HPT370/A; - fold PCI clock detection and DPLL setup code into init_chipset_hpt366(), unify the HPT36x/37x setup code and the speedproc handlers by joining the register setting lists into the table indexed by the clock selected; - add enablebits for all the chips to avoid touching disabled channels (though the HighPoint BIOS seem to only disable the primary one on HPT371/N); - separate the UltraDMA and MWDMA masks there to avoid changing PIO timings when setting an UltraDMA mode in hpt37x_tune_chipset(). This version has been tested on HPT370/302/371N. Thanks to Alan for the inspiration. Hopefully, his libata driver will also benefit from the work done on this "obsolete" driver... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* hpt366: clean up DMA timeout handling for HPT370Sergei Shtylyov2007-02-071-37/+25
| | | | | | | | | | | | | | | | | | | | Clean up DMA timeout handling for HPT370: - hpt370_lostirq_timeout() cleared the DMA status which made __ide_dma_end() called afterwards return the incorrect result, and the DMA engine was reset both before and after stopping DMA while the HighPoint drivers only do it after (which seems logical) -- fix this and also rename the function; - get rid of the needless mutual recursion in hpt370_ide_dma_end() and hpt370_ide_dma_timeout(); - get rid of hpt370_lostirq_timeout() since hwif->ide_dma_end() called from the driver's interrupt handler later does all its work. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* hpt366: merge HPT37x speedproc handlersSergei Shtylyov2007-02-071-170/+88
| | | | | | | | | | | | | | | | | | | | | | | Continue with the driver rewrite: - move the interrupt twiddling code from the speedproc handlers into the init_hwif_hpt366 which allows to merge the two HPT37x speedproc handlers into one; - get rid of in init_hpt366 which solely consists of the duplicate code, then fold init_hpt37x() into init_chipset_hpt366(); - fix hpt3xx_tune_drive() to always set the PIO mode requested, not the best possible one, change hpt366_config_drive_xfer_rate() accordingly, simplify it a bit; - group all the DMA related code together init_hwif_hpt366(), and generally clean up and beautify it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* hpt366: cache channel's MCR addressSergei Shtylyov2007-02-071-190/+181
| | | | | | | | | | | | | | | | | | | | | Begin the real driver redesign. For the starters: - cache the offset of the IDE channel's MISC. control registers which are used throughout the driver in hwif->select_data; - only touch the relevant MCR when detecting the cable type on HPT374's function 1; - make HPT36x's speedproc handler look the same way as HPT37x ones; fix the PIO timing register mask for HPT37x. - rename all the HPT3xx register related variables consistently; clean up the whitespace. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* hpt366: switch to using pci_get_slotSergei Shtylyov2007-02-071-30/+31
| | | | | | | | | | | Switch to using pci_get_slot() to get to the function 1 of HPT36x/374 chips -- there's no need for the driver itself to walk the list of the PCI devices, and it also forgets to check the bus number of the device found. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* hpt366: print the real chip name at startupSergei Shtylyov2007-02-071-37/+67
| | | | | | | | | | | | | | | | - Rework the driver setup code so that it prefixes the driver startup messages with the real chip name. - Print the measured f_CNT value and the DPLL setting for non-HPT3xx chips as well. - Claim the extra 240 bytes of I/O space for all chips, not only for those having PCI device ID of 0x0004. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* hpt366: rework rate filtering tidyAndrew Morton2007-02-071-9/+14
| | | | | | | Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* hpt366: rework rate filteringSergei Shtylyov2007-02-071-94/+85
| | | | | | | | | | | | | | | | | | | | | | | - Rework hpt3xx_ratemask() and hpt3xx_ratefilter() so that the former returns the max. mode computed at the load time and doesn't have to do bad Ultra33 drive list lookups anymore; remove the duplicate code from the latter function. Move the quirky drive list lookup into hpt3xx_quirkproc() where it should have been from the start... - Disable UltraATA/100 for HPT370 by default as the 33 MHz ATA clock being used does not allow for it, and this *greatly* increases the transfer speed. - Save some space by using byte-wide fields in struct hpt_info; switch to reading the 8-bit PCI revision ID reg. only, not the whole 32-bit reg. - Start incrementing the driver version number with each patch (should have been done from the first one posted). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Merge branch 'release' of ↵Linus Torvalds2007-02-0626-213/+407
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits) [IA64] swiotlb abstraction (e.g. for Xen) [IA64] swiotlb cleanup [IA64] make swiotlb use bus_to_virt/virt_to_bus [IA64] swiotlb bug fixes [IA64] Hook up getcpu system call for IA64 [IA64] clean up sparsemem memory_present call [IA64] show_mem() for IA64 sparsemem NUMA [IA64] missing exports hwsw_sync_... [IA64] virt_to_page() can be called with NULL arg [IA64] alignment bug in ldscript [IA64] register memory ranges in a consistent manner [IA64] Enable SWIOTLB only when needed [IA64-SGI] Check for TIO errors on shub2 Altix [IA64] remove bogus prototype ia64_esi_init() [IA64] Clear IRQ affinity when unregistered [IA64] fix ACPI Kconfig issues [IA64] Fix NULL-pointer dereference in ia64_machine_kexec() [IA64] find thread for user rbs address [IA64] use snprintf() on features field of /proc/cpuinfo [IA64] enable singlestep on system call ...
| * [IA64] swiotlb abstraction (e.g. for Xen)Jan Beulich2007-02-053-35/+159
| | | | | | | | | | | | | | | | | | Add abstraction so that the file can be used by environments other than IA64 and EM64T, namely for Xen. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] swiotlb cleanupJan Beulich2007-02-052-25/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | - add proper __init decoration to swiotlb's init code (and the code calling it, where not already the case) - replace uses of 'unsigned long' with dma_addr_t where appropriate - do miscellaneous simplicfication and cleanup Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] make swiotlb use bus_to_virt/virt_to_busJan Beulich2007-02-051-16/+17
| | | | | | | | | | | | | | | | | | | | | | Convert all phys_to_virt/virt_to_phys uses to bus_to_virt/virt_to_bus, as is what is meant and what is needed in (at least) some virtualized environments like Xen. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] swiotlb bug fixesJan Beulich2007-02-054-28/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes - marking I-cache clean of pages DMAed to now only done for IA64 - broken multiple inclusion in include/asm-x86_64/swiotlb.h - missing call to mark_clean in swiotlb_sync_sg() - a (perhaps only theoretical) issue in swiotlb_dma_supported() when io_tlb_end is exactly at the end of memory Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] Hook up getcpu system call for IA64Fenghua Yu2007-02-052-1/+5
| | | | | | | | | | | | | | | | getcpu system call returns cpu# and node# on which this system call and its caller are running. This patch hooks up its implementation on IA64. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] clean up sparsemem memory_present callBob Picco2007-02-051-33/+3
| | | | | | | | | | | | | | | | | | | | Eliminate arch specific memory_present call ia64 NUMA by utilizing sparse_memory_present_with_active_regions. Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] show_mem() for IA64 sparsemem NUMAGeorge Beshers2007-02-051-26/+48
| | | | | | | | | | | | | | | | | | | | On the ia64 architecture only this patch upgrades show_mem() for sparse memory to be the same as it was for discontig memory. It has been shown to work on NUMA and flatmem architectures. Signed-off-by: George Beshers <gbeshers@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] missing exports hwsw_sync_...Jan Beulich2007-02-051-0/+4
| | | | | | | | | | | | | | | | | | Add missing exports to allow several drivers to be built as module with CONFIG_IA64_HP_ZX1_SWIOTLB. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] virt_to_page() can be called with NULL argKirill Korotaev2007-02-051-1/+2
| | | | | | | | | | | | | | | | | | It does not return NULL when arg is NULL. Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] alignment bug in ldscriptKirill Korotaev2007-02-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | Occasionally the FSYS_RETURN patch list can have an odd length, causing other data structures to get out of alignment. In OpenVZ it is odd and we get misaligned kernel image, which does not boot. Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] register memory ranges in a consistent mannerBob Picco2007-02-053-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While pursuing and unrelated issue with 64Mb granules I noticed a problem related to inconsistent use of add_active_range. There doesn't appear any reason to me why FLATMEM versus DISCONTIG_MEM should register memory to add_active_range with different code. So I've changed the code into a common implementation. The other subtle issue fixed by this patch was calling add_active_range in count_node_pages before granule aligning is performed. We were lucky with 16MB granules but not so with 64MB granules. count_node_pages has reserved regions filtered out and as a consequence linked kernel text and data aren't covered by calls to count_node_pages. So linked kernel regions wasn't reported to add_active_regions. This resulted in free_initmem causing numerous bad_page reports. This won't occur with this patch because now all known memory regions are reported by register_active_ranges. Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Bob Picco <bob.picco@hp.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] Enable SWIOTLB only when neededJan Beulich2007-02-051-1/+4
| | | | | | | | | | | | | | | | Don't force CONFIG_SWIOTLB on when not actually needed (i.e. HP_ZX1 and SGI_SN2). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64-SGI] Check for TIO errors on shub2 AltixRuss Anderson2007-02-051-4/+12
| | | | | | | | | | | | | | The shub2 error interrupt handler must check for TIO errors. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] remove bogus prototype ia64_esi_init()Alex Williamson2007-02-051-1/+0
| | | | | | | | | | | | | | This function doesn't exist. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] Clear IRQ affinity when unregisteredAlex Williamson2007-02-051-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we offline a CPU, migrate_irqs() tries to determine whether the affinity bits of the IRQ descriptor match any of the remaining online CPUs. If not, it fixes up the interrupt to point somewhere else. Unfortunately, if an IRQ is unregistered the IRQ descriptor may still have affinity to the CPU being offlined, but the no_irq_chip handler doesn't provide a set_affinity function. This causes us to hit the WARN_ON in migrate_irqs(). The easiest solution seems to be setting all the bits in the affinity mask when the last interrupt is removed from the vector. I hit this on an older kernel with Xen/ia64 using driver domains (so it probably needs more testing on upstream). Xen essentially uses the bind/unbind interface in sysfs to unregister a device from a driver and thus unregister the interrupt. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] fix ACPI Kconfig issuesLen Brown2007-02-051-2/+2
| | | | | | | | | | | | | | | | | | All IA64 systems except IA64_HP_SIM include ACPI and PCI. So prevent IA64 Kconfigs that try to do irritating things like building PCI without building ACPI. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] Fix NULL-pointer dereference in ia64_machine_kexec()Bernhard Walle2007-02-052-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a NULL-pointer dereference in ia64_machine_kexec(). The variable ia64_kimage is set in machine_kexec_prepare() which is called from sys_kexec_load(). If kdump wasn't configured before, ia64_kimage is NULL. machine_kdump_on_init() passes ia64_kimage() to machine_kexec() which assumes a valid value. The patch also adds a few sanity checks for the image to simplify debugging of similar problems in future. Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] find thread for user rbs addressbibo,mao2007-02-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | I encountered one problem when running ptrace test case the situation is this: traced process's syscall parameter needs to be accessed, but for sys_clone system call with clone_flag (CLONE_VFORK | CLONE_VM | SIGCHLD) parameter. This syscall's parameter accessing result is wrong. The reason is that vforked child process mm point is the same, but tgid is different. Without this patch find_thread_for_addr will return vforked process if vforked process is also stopped, but not the thread which calls vfork syscall. Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] use snprintf() on features field of /proc/cpuinfoAron Griffis2007-02-051-17/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some patches have turned up on xen-devel recently to convert strcpy() to safer alternatives and so forth. While reviewing those patches I noticed that the features string building could be cleaned up. This patch uses snprintf() instead of strcpy() and direct character pointer manipulation. It makes the features string building safe and gets rid of the special case for features output in show_cpuinfo() Additionally I removed the (int) cast of ARRAY_SIZE, which seems to serve no purpose. Signed-off-by: Aron Griffis <aron@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] enable singlestep on system callbibo,mao2007-02-052-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As is pointed out in http://www.gelato.org/community/view_linear.php?id=1_1036&from=authors&value=Ian%20Wienand#1_1039, if single step on break instruction, the break fault has higher priority than the single-step trap. When the break fault handler is entered, it advances the IP by 1 instruction so break instruction single-stepping is skipped, actually it is next instruction which is single stepped. This patch modifies this, it adds TIF_SINGLESTEP bit for thread flags, and generate a fake sigtrap when single stepping break instruction. Test case in attachment can verify this. Any comments is welcome. Signed-off-by: bibo, mao <bibo.mao@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] kexec: Move machine_shutdown from machine_kexec.c to process.cHorms2007-02-052-13/+16
| | | | | | | | | | | | | | | | | | This moves the ia64 implementation of machine_shutdown() from machine_kexec.c to process.c, which is in keeping with the implelmentation on other architectures, and seems like a much more appropriate home for it. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] add newline to PAL-code warning messageHorms2007-02-051-1/+1
| | | | | | | | | | Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] kexec: Remove inline declaration of efi_get_pal_addr()Horms2007-02-051-1/+1
| | | | | | | | | | | | | | | | Remove the Remove inline declaration of efi_get_pal_addr() as it is declared in linux/efi.h. Signed-Off-By: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] kexec: Minor enhancement to includes in crash.cHorms2007-02-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | linux/uaccess.h was being included, but it seems that really the following includes are needed. asm/page.h: for __va() and PAGE_SHIFT asm/uaccess.h: for copy_to_user() I guess that linux/uaccess.h pulls in both asm/page.h and asm/uaccess.h. I notices this while backporting the code to xen's linux-2.6.16.33, which does not have linux/uaccess.h. I'm posting it as I think it is a correct, though somewhat cosmetic fix. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] kexec: typo in the saved_max_pfn description in contig.cHorms2007-02-051-1/+1
| | | | | | | | | | | | | | Fix a typo in the saved_max_pfn description in contig.c Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * [IA64] Zero size /proc/vmcore on ia64Horms2007-02-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Set saved_max_pfn when discontig memory is in use. This sets up saved_max_pfn when disctontig memory is in use. This mirrors the code for contig memory. This patch does not entirely solve the problem of making vmcore work, however it does appear to be neccessary. Please consider applying. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
OpenPOWER on IntegriCloud