summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ARM: 7607/1: realview: fix private peripheral memory base for EB rev. B boardsWill Deacon2012-12-201-1/+1
| | | | | | | | | | | | | | | Commit 34ae6c96a6a7 ("ARM: 7298/1: realview: fix mapping of MPCore private memory region") accidentally broke the definition for the base address of the private peripheral region on revision B Realview-EB boards. This patch uses the correct address for REALVIEW_EB11MP_PRIV_MEM_BASE. Cc: <stable@vger.kernel.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 7606/1: cache: flush to LoUU instead of LoUIS on uniprocessor CPUsWill Deacon2012-12-201-2/+4
| | | | | | | | | | | | | | flush_cache_louis flushes the D-side caches to the point of unification inner-shareable. On uniprocessor CPUs, this is defined as zero and therefore no flushing will take place. Rather than invent a new interface for UP systems, instead use our SMP_ON_UP patching code to read the LoUU from the CLIDR instead. Cc: <stable@vger.kernel.org> Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: missing ->mmap_sem around find_vma() in swp_emulate.cAl Viro2012-12-201-0/+2
| | | | | | | | | | | | find_vma() is *not* safe when somebody else is removing vmas. Not just the return value might get bogus just as you are getting it (this instance doesn't try to dereference the resulting vma), the search itself can get buggered in rather spectacular ways. IOW, ->mmap_sem really, really is not optional here. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 7605/1: vmlinux.lds: Move .notes section next to the rodataPawel Moll2012-12-161-2/+2
| | | | | | | | | | | | | | | The .notes, being read-only data by nature, were placed between read-write .data and .bss. This was harmful in case of the XIP kernel, as being placed in the RAM range, most likely far from the ROM address, was inflating the XIP images. Moving the .notes at the end of the read-only section (consisting of .text, .rodata and unwind info) fixes the problem. Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 7602/1: Pass real "__machine_arch_type" variable to ↵Alexander Shiyan2012-12-161-1/+1
| | | | | | | | | | setup_machine_tags() procedure This modification is needed to proper boot the custom machines with the IDs that are not described in the mach-types.h table. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 7600/1: include CONFIG_DEBUG_LL_INCLUDE rather than mach/debug-macro.SShawn Guo2012-12-161-1/+1
| | | | | | | | | | | | | | | | | | | | Commit 91a9fec (ARM: move debug macros to common location) moves arch/arm/kernel/debug.S and arch/arm/kernel/head.S to CONFIG_DEBUG_LL_INCLUDE, but leaves arch/arm/boot/compressed/head.S still with mach/debug-macro.S. This causes the following build error on platforms that moved to new DEBUG_LL inclusion mechanism, when arch/arm/boot/compressed/head.S is compiled with DEBUG turned on. AS arch/arm/boot/compressed/head.o arch/arm/boot/compressed/head.S:49:30: fatal error: mach/debug-macro.S: No such file or directory compilation terminated. Fix the problem by replacing mach/debug-macro.S inclusion with CONFIG_DEBUG_LL_INCLUDE one. Reported-by: Steev Klimaszewski <steev@genesi-usa.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Revert "x86-64/efi: Use EFI to deal with platform wall clock (again)"Linus Torvalds2012-12-157-55/+116
| | | | | | | | | | | | | | | | | | | This reverts commit bd52276fa1d4 ("x86-64/efi: Use EFI to deal with platform wall clock (again)"), and the two supporting commits: da5a108d05b4: "x86/kernel: remove tboot 1:1 page table creation code" 185034e72d59: "x86, efi: 1:1 pagetable mapping for virtual EFI calls") as they all depend semantically on commit 53b87cf088e2 ("x86, mm: Include the entire kernel memory map in trampoline_pgd") that got reverted earlier due to the problems it caused. This was pointed out by Yinghai Lu, and verified by me on my Macbook Air that uses EFI. Pointed-out-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-next' of ↵Linus Torvalds2012-12-1549-3989/+2845
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull target updates from Nicholas Bellinger: "It has been a very busy development cycle this time around in target land, with the highlights including: - Kill struct se_subsystem_dev, in favor of direct se_device usage (hch) - Simplify reservations code by combining SPC-3 + SCSI-2 support for virtual backends only (hch) - Simplify ALUA code for virtual only backends, and remove left over abstractions (hch) - Pass sense_reason_t as return value for I/O submission path (hch) - Refactor MODE_SENSE emulation to allow for easier addition of new mode pages. (roland) - Add emulation of MODE_SELECT (roland) - Fix bug in handling of ExpStatSN wrap-around (steve) - Fix bug in TMR ABORT_TASK lookup in qla2xxx target (steve) - Add WRITE_SAME w/ UNMAP=0 support for IBLOCK backends (nab) - Convert ib_srpt to use modern target_submit_cmd caller + drop legacy ioctx->kref usage (nab) - Convert ib_srpt to use modern target_submit_tmr caller (nab) - Add link_magic for fabric allow_link destination target_items for symlinks within target_core_fabric_configfs.c code (nab) - Allocate pointers in instead of full structs for config_group->default_groups (sebastian) - Fix 32-bit highmem breakage for FILEIO (sebastian) All told, hch was able to shave off another ~1K LOC by killing the se_subsystem_dev abstraction, along with a number of PR + ALUA simplifications. Also, a nice patch by Roland is the refactoring of MODE_SENSE handling, along with the addition of initial MODE_SELECT emulation support for virtual backends. Sebastian found a long-standing issue wrt to allocation of full config_group instead of pointers for config_group->default_group[] setup in a number of areas, which ends up saving memory with big configurations. He also managed to fix another long-standing BUG wrt to broken 32-bit highmem support within the FILEIO backend driver. Thank you again to everyone who contributed this round!" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (50 commits) target/iscsi_target: Add NodeACL tags for initiator group support target/tcm_fc: fix the lockdep warning due to inconsistent lock state sbp-target: fix error path in sbp_make_tpg() sbp-target: use simple assignment in tgt_agent_rw_agent_state() iscsi-target: use kstrdup() for iscsi_param target/file: merge fd_do_readv() and fd_do_writev() target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping target: Add link_magic for fabric allow_link destination target_items ib_srpt: Convert TMR path to target_submit_tmr ib_srpt: Convert I/O path to target_submit_cmd + drop legacy ioctx->kref target: Make spc_get_write_same_sectors return sector_t target/configfs: use kmalloc() instead of kzalloc() for default groups target/configfs: allocate only 6 slots for dev_cg->default_groups target/configfs: allocate pointers instead of full struct for default_groups target: update error handling for sbc_setup_write_same() iscsit: use GFP_ATOMIC under spin lock iscsi_target: Remove redundant null check before kfree target/iblock: Forward declare bio helpers target: Clean up flow in transport_check_aborted_status() target: Clean up logic in transport_put_cmd() ...
| * target/iscsi_target: Add NodeACL tags for initiator group supportAndy Grover2012-12-134-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thanks for reviews, looking a lot better. ---- 8< ---- Initiator access config could be easier. The way other storage vendors have addressed this is to support initiator groups: the admin adds initiator WWNs to the group, and then LUN permissions can be granted for the entire group at once. Instead of changing ktarget's configfs interface, this patch keeps the configfs interface per-initiator-wwn and just adds a 'tag' field for each. This should be enough for user tools like targetcli to group initiator ACLs and sync their configurations. acl_tag is not used internally, but needs to be kept in configfs so that all user tools can avoid dependencies on each other. Code tested to work, although userspace pieces still to be implemented. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target/tcm_fc: fix the lockdep warning due to inconsistent lock stateYi Zou2012-12-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lockdep warning below is in theory correct but it will be in really weird rare situation that ends up that deadlock since the tcm fc session is hashed based the rport id. Nonetheless, the complaining below is about rcu callback that does the transport_deregister_session() is happening in softirq, where transport_register_session() that happens earlier is not. This triggers the lockdep warning below. So, just fix this to make lockdep happy by disabling the soft irq before calling transport_register_session() in ft_prli. BTW, this was found in FCoE VN2VN over two VMs, couple of create and destroy would get this triggered. v1: was enforcing register to be in softirq context which was not righ. See, http://www.spinics.net/lists/target-devel/msg03614.html v2: following comments from Roland&Nick (thanks), it seems we don't have to do transport_deregister_session() in rcu callback, so move it into ft_sess_free() but still do kfree() of the corresponding ft_sess struct in rcu callback to make sure the ft_sess is not freed till the rcu callback. ... [ 1328.370592] scsi2 : FCoE Driver [ 1328.383429] fcoe: No FDMI support. [ 1328.384509] host2: libfc: Link up on port (000000) [ 1328.934229] host2: Assigned Port ID 00a292 [ 1357.232132] host2: rport 00a393: Remove port [ 1357.232568] host2: rport 00a393: Port sending LOGO from Ready state [ 1357.233692] host2: rport 00a393: Delete port [ 1357.234472] host2: rport 00a393: work event 3 [ 1357.234969] host2: rport 00a393: callback ev 3 [ 1357.235979] host2: rport 00a393: Received a LOGO response closed [ 1357.236706] host2: rport 00a393: work delete [ 1357.237481] [ 1357.237631] ================================= [ 1357.238064] [ INFO: inconsistent lock state ] [ 1357.238450] 3.7.0-rc7-yikvm+ #3 Tainted: G O [ 1357.238450] --------------------------------- [ 1357.238450] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 1357.238450] ksoftirqd/0/3 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 1357.238450] (&(&se_tpg->session_lock)->rlock){+.?...}, at: [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] {SOFTIRQ-ON-W} state was registered at: [ 1357.238450] [<ffffffff810834f5>] mark_held_locks+0x6d/0x95 [ 1357.238450] [<ffffffff8108364a>] trace_hardirqs_on_caller+0x12d/0x197 [ 1357.238450] [<ffffffff810836c1>] trace_hardirqs_on+0xd/0xf [ 1357.238450] [<ffffffff8149caba>] _raw_spin_unlock_irq+0x2d/0x45 [ 1357.238450] [<ffffffffa01e8d10>] __transport_register_session+0xb8/0x122 [target_core_mod] [ 1357.238450] [<ffffffffa01e8dbe>] transport_register_session+0x44/0x5a [target_core_mod] [ 1357.238450] [<ffffffffa018e32c>] ft_prli+0x1e3/0x275 [tcm_fc] [ 1357.238450] [<ffffffffa0160e8d>] fc_rport_recv_req+0x95e/0xdc5 [libfc] [ 1357.238450] [<ffffffffa015be88>] fc_lport_recv_els_req+0xc4/0xd5 [libfc] [ 1357.238450] [<ffffffffa015c778>] fc_lport_recv_req+0x12f/0x18f [libfc] [ 1357.238450] [<ffffffffa015a6d7>] fc_exch_recv+0x8ba/0x981 [libfc] [ 1357.238450] [<ffffffffa0176d7a>] fcoe_percpu_receive_thread+0x47a/0x4e2 [fcoe] [ 1357.238450] [<ffffffff810549f1>] kthread+0xb1/0xb9 [ 1357.238450] [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0 [ 1357.238450] irq event stamp: 275411 [ 1357.238450] hardirqs last enabled at (275410): [<ffffffff810bb6a0>] rcu_process_callbacks+0x229/0x42a [ 1357.238450] hardirqs last disabled at (275411): [<ffffffff8149c2f7>] _raw_spin_lock_irqsave+0x22/0x8e [ 1357.238450] softirqs last enabled at (275394): [<ffffffff8103d669>] __do_softirq+0x246/0x26f [ 1357.238450] softirqs last disabled at (275399): [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62 [ 1357.238450] [ 1357.238450] other info that might help us debug this: [ 1357.238450] Possible unsafe locking scenario: [ 1357.238450] [ 1357.238450] CPU0 [ 1357.238450] ---- [ 1357.238450] lock(&(&se_tpg->session_lock)->rlock); [ 1357.238450] <Interrupt> [ 1357.238450] lock(&(&se_tpg->session_lock)->rlock); [ 1357.238450] [ 1357.238450] *** DEADLOCK *** [ 1357.238450] [ 1357.238450] no locks held by ksoftirqd/0/3. [ 1357.238450] [ 1357.238450] stack backtrace: [ 1357.238450] Pid: 3, comm: ksoftirqd/0 Tainted: G O 3.7.0-rc7-yikvm+ #3 [ 1357.238450] Call Trace: [ 1357.238450] [<ffffffff8149399a>] print_usage_bug+0x1f5/0x206 [ 1357.238450] [<ffffffff8100da59>] ? save_stack_trace+0x2c/0x49 [ 1357.238450] [<ffffffff81082aae>] ? print_irq_inversion_bug.part.14+0x1ae/0x1ae [ 1357.238450] [<ffffffff81083336>] mark_lock+0x106/0x258 [ 1357.238450] [<ffffffff81084e34>] __lock_acquire+0x2e7/0xe53 [ 1357.238450] [<ffffffff8102903d>] ? pvclock_clocksource_read+0x48/0xb4 [ 1357.238450] [<ffffffff810ba6a3>] ? rcu_process_gp_end+0xc0/0xc9 [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff81085ef1>] lock_acquire+0x119/0x143 [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff8149c329>] _raw_spin_lock_irqsave+0x54/0x8e [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff810bb6a0>] ? rcu_process_callbacks+0x229/0x42a [ 1357.238450] [<ffffffffa018ddc5>] ft_sess_rcu_free+0x17/0x24 [tcm_fc] [ 1357.238450] [<ffffffffa018ddae>] ? ft_sess_free+0x1b/0x1b [tcm_fc] [ 1357.238450] [<ffffffff810bb6d7>] rcu_process_callbacks+0x260/0x42a [ 1357.238450] [<ffffffff8103d55d>] __do_softirq+0x13a/0x26f [ 1357.238450] [<ffffffff8149b34e>] ? __schedule+0x65f/0x68e [ 1357.238450] [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62 [ 1357.238450] [<ffffffff8105c83c>] smpboot_thread_fn+0x1a5/0x1aa [ 1357.238450] [<ffffffff8105c697>] ? smpboot_unregister_percpu_thread+0x47/0x47 [ 1357.238450] [<ffffffff810549f1>] kthread+0xb1/0xb9 [ 1357.238450] [<ffffffff8149b49d>] ? wait_for_common+0xbb/0x10a [ 1357.238450] [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59 [ 1357.238450] [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0 [ 1357.238450] [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59 [ 1417.440099] rport-2:0-0: blocked FC remote port time out: removing rport Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Open-FCoE <devel@open-fcoe.org> Cc: Nicholas A. Bellinger <nab@risingtidesystems.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * sbp-target: fix error path in sbp_make_tpg()Chris Boot2012-12-121-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If the TPG memory is allocated successfully, but we fail further along in the function, a dangling pointer to freed memory is left in the TPort structure. This is mostly harmless, but does prevent re-trying the operation without first removing the TPort altogether. Reported-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Chris Boot <bootc@bootc.net> Cc: Andy Grover <agrover@redhat.com> Cc: Nicholas A. Bellinger <nab@linux-iscsi.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * sbp-target: use simple assignment in tgt_agent_rw_agent_state()Chris Boot2012-12-121-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to memcpy() a 32-bit integer. The data pointer is guaranteed to be quadlet aligned by the FireWire stack so we can replace the memcpy() with an assignment. Thanks to Stefan Richter. Signed-off-by: Chris Boot <bootc@bootc.net> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Andy Grover <agrover@redhat.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * iscsi-target: use kstrdup() for iscsi_paramSebastian Andrzej Siewior2012-12-071-13/+3
| | | | | | | | | | | | | | | | | | The kmalloc() + strlen() + memcpy() block is what kstrdup() does as well. While here I also removed the "to NULL assignment" of pointers which are fed to kfree or thrown away anyway. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target/file: merge fd_do_readv() and fd_do_writev()Sebastian Andrzej Siewior2012-12-051-60/+32
| | | | | | | | | | | | | | | | Those two functions are almost identical so merge them. Noticed this while fixing the highmem in both cases. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target/file: Fix 32-bit highmem breakage for SGL -> iovec mappingSebastian Andrzej Siewior2012-12-051-2/+7
| | | | | | | | | | | | | | | | | | | | | | This patch changes vectored file I/O to use kmap + kunmap when mapping incoming SGL memory -> struct iovec in order to properly support 32-bit highmem configurations. This is because an extra bounce buffer may be required when processing scatterlist pages allocated with GFP_KERNEL. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: Add link_magic for fabric allow_link destination target_itemsNicholas Bellinger2012-12-054-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds [dev,lun]_link_magic value assignment + checks within generic target_fabric_port_link() and target_fabric_mappedlun_link() code to ensure destination config_item *target_item sent from configfs_symlink() -> config_item_operations->allow_link() is the underlying se_device->dev_group and se_lun->lun_group that we expect to symlink. Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * ib_srpt: Convert TMR path to target_submit_tmrNicholas Bellinger2012-11-281-19/+18
| | | | | | | | | | | | | | | | | | | | | | | | This patch converts the TMR path in srpt_handle_tsk_mgmt() to use target_submit_tmr() with TARGET_SCF_ACK_KREF flag usage. v2: Drop ununused res in target_submit_tmr (Fengguang.Wu) Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * ib_srpt: Convert I/O path to target_submit_cmd + drop legacy ioctx->krefNicholas Bellinger2012-11-282-71/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts the main srpt_handle_cmd() I/O path to use modern target_submit_cmd() with TARGET_SCF_ACK_KREF flag usage. This includes dropping the original internal ioctx->kref + srpt_put_send_ioctx() usage in favor of target_put_sess_cmd() w/ se_cmd_t->cmd_kref within ib_srpt response callbacks. It also updates srpt_abort_cmd() to call target_put_sess_cmd() for completion of aborted commands, and adds target_wait_for_sess_cmds() into srpt_release_channel_work() to allow outstanding I/O to complete during session shutdown. Also, go ahead and update srpt_handle_tsk_mgmt() to make the remaining transport_init_se_cmd() to setup the ioctx->cmd with se_tmr_req. Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: Make spc_get_write_same_sectors return sector_tNicholas Bellinger2012-11-273-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | We already expect TFO->get_blocks() to return sector_t for zero value case when doing WRITE_SAME to the end of the backend device, so go ahead and return sector_t from spc_get_write_same_sectors() to handle this case properly. Also, update the single iblock_execute_write_same() caller of this code. Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target/configfs: use kmalloc() instead of kzalloc() for default groupsSebastian Andrzej Siewior2012-11-273-12/+12
| | | | | | | | | | | | | | | | | | | | All elements are assigned even the NULL member at the end so there is no reason to allocate zeroed memory. (nab: Fix up minor apply breakage in for-next) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target/configfs: allocate only 6 slots for dev_cg->default_groupsSebastian Andrzej Siewior2012-11-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | Only slots 0-5 are used so 6 slots should be enough. I don't see anyone writting anything else than NULL into ->default_groups[5] so a "late" initialisation should not happen here. (nab: Fix up minor apply breakage in for-next) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target/configfs: allocate pointers instead of full struct for default_groupsSebastian Andrzej Siewior2012-11-273-12/+12
| | | | | | | | | | | | | | | | | | | | | | default_groups is defined as struct config_group **default_groups so we don't need to allocate a whole struct but only enough space for a pointer that points there. (nab: Fix up minor apply breakage in for-next) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: update error handling for sbc_setup_write_same()Dan Carpenter2012-11-271-3/+3
| | | | | | | | | | | | | | | | We recently changed this to return positive subsystem error codes so the error handling needs to be updated. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * iscsit: use GFP_ATOMIC under spin lockWei Yongjun2012-11-271-1/+1
| | | | | | | | | | | | | | | | | | | | The function iscsit_build_conn_drop_async_message() is called from iscsit_close_connection() with spin lock 'sess->conn_lock' held, so we should use GFP_ATOMIC instead of GFP_KERNEL. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * iscsi_target: Remove redundant null check before kfreeSachin Kamat2012-11-271-4/+2
| | | | | | | | | | | | | | kfree on null pointer is a no-op. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target/iblock: Forward declare bio helpersNicholas Bellinger2012-11-271-86/+81
| | | | | | | | | | | | | | | | Go ahead and forward declare the handful of helper functions required for bio submission code in order to avoid the extra function prototypes. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: Clean up flow in transport_check_aborted_status()Roland Dreier2012-11-271-14/+10
| | | | | | | | | | Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
| * target: Clean up logic in transport_put_cmd()Roland Dreier2012-11-271-5/+4
| | | | | | | | | | | | | | No need to have a goto where a return is clearer. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
| * qla2xxx: Look up LUN for abort requestsSteve Hodgson2012-11-271-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | Search through the list of pending commands on the session list to find the command the initiator is actually aborting, so that we can pass the correct LUN to the core TMR handling code. (nab: Allow abort requests to work to LUN=0 with mainline target code) Signed-off-by: Steve Hodgson <steve@purestorage.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
| * target: Update copyright information to 2012Nicholas Bellinger2012-11-2718-59/+19
| | | | | | | | | | | | | | | | v2: Use correct target_core_stat.c 2006 copyright year v3: Drop extra unnessary legal verbage from header (hch) Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target/iblock: Add WRITE_SAME w/ UNMAP=0 emulation supportNicholas Bellinger2012-11-151-7/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for emulation of WRITE_SAME w/ UNMAP=0 within iblock_execute_write_same() backend code. The emulation uses a bio_add_page() call for each sector, and by default enforces a limit of max_write_same_len=0xFFFF (65536) sectors following what scsi_debug reports per default for MAXIMUM WRITE SAME LENGTH. It also sets max_write_same_len to the operational default at setup -> iblock_configure_device() time. (hch: Move unmap logic into iblock_execute_write_same_unmap + add check for single sector SGLs in iblock_execute_write_same) (mkp: Update comment for 0xFFFF magic constant) (nab: drop left-over max_write_same_len check in iblock_execute_write_same) Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: Add/check max_write_same_len device attribute + update block limits VPDNicholas Bellinger2012-11-156-1/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new max_write_same_len device attribute for use with WRITE_SAME w/ UNMAP=0 backend emulation. This can be useful for lowering the default backend value (IBLOCK uses 0xFFFF). Also, update block limits VPD emulation code in spc_emulate_evpd_b0() to report MAXIMUM WRITE SAME LENGTH, and enforce max_write_same_len during sbc_parse() -> sbc_setup_write_same() CDB sanity checking for all emulated WRITE_SAME w/ UNMAP=0 cases. (Robert: Move max_write_same_len check in sbc_setup_write_same() to check both WRITE_SAME w/ UNMAP=1 and w/ UNMAP=0 cases) Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target/sbc: Seperate WRITE_SAME based on UNMAP flag in sbc_opsNicholas Bellinger2012-11-152-28/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new sbc_ops->execute_write_same_unmap() caller for use with WRITE_SAME w/ UNMAP=1, and performs the ->execute_cmd() setup based this bit within sbc_setup_write_same() code. Also, makes the changes in sbc_parse_cdb() to handle a sense_reason_t return from sbc_setup_write_same() on error. Reported-by: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: Change sbc_emulate_noop to return sense_reason_tNicholas Bellinger2012-11-071-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by Fengguang Wu + 0 day build team, the sense_reason_t conversion in for-next did not catch the recent sbc_emulate_noop() addition in mainline, producing the following build warning in auto-next: drivers/target/target_core_sbc.c: In function ‘sbc_parse_cdb’: drivers/target/target_core_sbc.c:555: warning: assignment from incompatible pointer type Go ahead and remove duplicate sbc_emulate_verify(), and change VERIFY to use sbc_emulate_noop() as well. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * sbp-target: remove depends on CONFIG_EXPERIMENTALKees Cook2012-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Chris Boot <bootc@bootc.net> CC: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * iscsi-target: Always send a response before terminating iSCSI connectionRoland Dreier2012-11-072-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | There are some cases, for example when the initiator sends an out-of-bounds ErrorRecoveryLevel value, where the iSCSI target terminates the connection without sending back any error. Audit the login path and add appropriate iscsit_tx_login_rsp() calls to make sure this doesn't happen. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * iscsi-target: Fix bug in handling of ExpStatSN ACK during u32 wrap-aroundSteve Hodgson2012-11-073-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug in the hanlding of initiator provided ExpStatSN and individual iscsi_cmd->stat_sn comparision during iscsi_conn->stat_sn wrap-around within iscsit_ack_from_expstatsn() code. This bug would manifest itself as iscsi_cmd descriptors not being Acked by a lower ExpStatSn, causing them to be leaked until an iSCSI connection or session reinstatement event occurs to release all commands. Also fix up two other uses of incorrect CmdSN SNA comparison to use wrapper usage from include/scsi/iscsi_proto.h. Signed-off-by: Steve Hodgson <steve@purestorage.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * iscsi-target: Fix potential deadlock on lock taken in timerRoland Dreier2012-11-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to disable BHs when taking sess_idr_lock because the iscsit_handle_time2retain_timeout() timer function takes se_tpg->session_lock, and iscsit_close_session() nests sess_idr_lock inside se_tpg->session_lock. So if the timer can run inside sess_idr_lock, we have a potential AB-BA deadlock. Fix this by disabling BHs when taking sess_idr_lock. This was found because of a lockdep warning, but it looks like a real (if highly theoretical) deadlock. In any case avoiding lockdep spew so that we can find other issues is a worthy cause. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: Fix exception path pr_reg put regression for PR RELEASENicholas Bellinger2012-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix a regression bug in core_scsi3_emulate_pro_release() where should still be getting released via core_scsi3_put_pr_reg() during No persistent reservation, with returing GOOD status. Use goto statement here to follow converted code from hch. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: Fix possible TFO->write_pending() sense_reason_t silent WRITE corruptionNicholas Bellinger2012-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a possible case in transport_generic_new_cmd() where a failure from TFO->write_pending() from a fabric module return something other than -EAGAIN or -ENOMEM would cause a failed WRITE to silently succeed. Go ahead and return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE for this special case instead of only just making noise with WARN_ON(). (v2: Fix incorrect exception return for all cases) Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: Fix incorrect inversion of TPGS_EXPLICT_ALUA checkNicholas Bellinger2012-11-061-1/+1
| | | | | | | | | | | | | | | | | | Fix a bug introduced with patch "target: pass sense_reason as a return value" in for-3.8 code where only target port groups with TPGS_EXPLICT_ALUA set need to be allowed to perform explictly ALUA. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: pass sense_reason as a return valueChristoph Hellwig2012-11-0624-1059/+841
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: Fix incorrect starting offset after MODE_SENSE refactoringNicholas Bellinger2012-11-061-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a new off-by-one bug in the hardcoded starting offset of spc_emulate_modesense() code that causes BLOCK DESCRIPTOR to be incorrectly written within the MEDIUM TYPE buffer area of the mode parameter header. According to spc4r30, Section 7.5.4, BLOCK DESCRIPTOR for MODE_SENSE_10 starts at byte 3, and BLOCK_DESCRIPTOR for MODE_SENSE (6) starts at byte 2. (roland: add MODE DATA LENGTH + MEDIUM TYPE offset comment) Cc: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: Add emulation for MODE SELECTRoland Dreier2012-11-061-0/+53
| | | | | | | | | | | | | | | | | | | | This is another thing that compliance tests try, and it's easy to implement on top of the MODE SENSE refactoring; since we don't claim to support any changeable values, all we need to do is check that the page contents sent by the initiator match what we would return. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: Implement mode page 0x1c, "Informational Exceptions"Roland Dreier2012-11-061-0/+14
| | | | | | | | | | | | | | | | | | The Windows SCSI compliance test asks for this mode page, and it's easy to implement: we can just return all 0s to show we don't support any of these features. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: Refactor MODE SENSE emulationRoland Dreier2012-11-061-59/+176
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert spc_emulate_modesense() to use a table of mode pages, rather than a switch statement. This makes it possible to add more pages sanely -- in particular we no longer need to make sure we keep the 0x3f (return all mode pages) case in sync. While we're touching this code, make our MODE SENSE emulation a bit better in a couple of ways: - When the initiator passes PC == 1 asking for changeable values, return all 0s to show we don't support setting anything. - Return a block descriptor for disk devices. (nab: fix up device attribute references to use dev->dev_attrib in for-next code) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * iscsi-target: Use list_first_entry() where appropriateRoland Dreier2012-11-062-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of using the obfuscated pattern of list_for_each_entry(var, list, ...) break; to set var to the first entry of a list, use the straightforward var = list_first_entry(list, ...); Reported-by: Joern Engel <joern@logfs.org> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: remove ->get_device_revChristoph Hellwig2012-11-068-26/+1
| | | | | | | | | | | | | | | | | | Now that the reservations and ALUA code have been cleaned up there is no need for the get_device_rev method, as we only need the standards revision in the inquiry data, where we can hardcode it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: simplify alua supportChristoph Hellwig2012-11-067-166/+65
| | | | | | | | | | | | | | | | We always support ALUA for virtual backends, and never for physical ones. Simplify the code to just deal with these two cases and remove the superflous abstractions. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * target: simplify reservations codeChristoph Hellwig2012-11-067-298/+127
| | | | | | | | | | | | | | | | | | | | | | | | We do not support host-level reservations for the pscsi backend, and all virtual backends are newere than SCSI-2, so just make the combined SPC-3 + SCSI-2 support the only supported variant and kill the switches for the different implementations, given that this code handles the no-op version just fine. (hch: Update DRF_SPC2_RESERVATIONS lock usage) Signed-off-by: Christoph Hellwig <hch@lst.de>
OpenPOWER on IntegriCloud