summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* udp: add encap_destroy callbackTom Parkin2013-03-203-0/+16
| | | | | | | | | | | | | | | | | Users of udp encapsulation currently have an encap_rcv callback which they can use to hook into the udp receive path. In situations where a encapsulation user allocates resources associated with a udp encap socket, it may be convenient to be able to also hook the proto .destroy operation. For example, if an encap user holds a reference to the udp socket, the destroy hook might be used to relinquish this reference. This patch adds a socket destroy hook into udp, which is set and enabled in the same way as the existing encap_rcv hook. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* genetlink: trigger BUG_ON if a group name is too longMasatake YAMATO2013-03-201-0/+1
| | | | | | | Trigger BUG_ON if a group name is longer than GENL_NAMSIZ. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of git://1984.lsi.us.es/nfDavid S. Miller2013-03-2012-51/+70
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== The following patchset contains 7 Netfilter/IPVS fixes for 3.9-rc, they are: * Restrict IPv6 stateless NPT targets to the mangle table. Many users are complaining that this target does not work in the nat table, which is the wrong table for it, from Florian Westphal. * Fix possible use before initialization in the netns init path of several conntrack protocol trackers (introduced recently while improving conntrack netns support), from Gao Feng. * Fix incorrect initialization of copy_range in nfnetlink_queue, spotted by Eric Dumazet during the NFWS2013, patch from myself. * Fix wrong calculation of next SCTP chunk in IPVS, from Julian Anastasov. * Remove rcu_read_lock section in IPVS while calling ipv4_update_pmtu not required anymore after change introduced in 3.7, again from Julian. * Fix SYN looping in IPVS state sync if the backup is used a real server in DR/TUN modes, this required a new /proc entry to disable the director function when acting as backup, also from Julian. * Remove leftover IP_NF_QUEUE Kconfig after ip_queue removal, noted by Paul Bolle. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * netfilter: remove unused "config IP_NF_QUEUE"Paul Bolle2013-03-201-13/+0
| | | | | | | | | | | | | | | | | | Kconfig symbol IP_NF_QUEUE is unused since commit d16cf20e2f2f13411eece7f7fb72c17d141c4a84 ("netfilter: remove ip_queue support"). Let's remove it too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * ipvs: remove extra rcu lockJulian Anastasov2013-03-191-2/+0
| | | | | | | | | | | | | | | | | | In 3.7 we added code that uses ipv4_update_pmtu but after commit c5ae7d4192 (ipv4: must use rcu protection while calling fib_lookup) the RCU lock is not needed. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
| * ipvs: add backup_only flag to avoid loopsJulian Anastasov2013-03-194-4/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dmitry Akindinov is reporting for a problem where SYNs are looping between the master and backup server when the backup server is used as real server in DR mode and has IPVS rules to function as director. Even when the backup function is enabled we continue to forward traffic and schedule new connections when the current master is using the backup server as real server. While this is not a problem for NAT, for DR and TUN method the backup server can not determine if a request comes from client or from director. To avoid such loops add new sysctl flag backup_only. It can be needed for DR/TUN setups that do not need backup and director function at the same time. When the backup function is enabled we stop any forwarding and pass the traffic to the local stack (real server mode). The flag disables the director function when the backup function is enabled. For setups that enable backup function for some virtual services and director function for other virtual services there should be another more complex solution to support DR/TUN mode, may be to assign per-virtual service syncid value, so that we can differentiate the requests. Reported-by: Dmitry Akindinov <dimak@stalker.com> Tested-by: German Myzovsky <lawyer@sipnet.ru> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
| * ipvs: fix sctp chunk length orderJulian Anastasov2013-03-191-7/+9
| | | | | | | | | | | | | | | | | | Fix wrong but non-fatal access to chunk length. sch->length should be in network order, next chunk should be aligned to 4 bytes. Problem noticed in sparse output. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
| * netfilter: ip6t_NPT: restrict to mangle tableFlorian Westphal2013-03-151-0/+2
| | | | | | | | | | | | | | | | | | As the translation is stateless, using it in nat table doesn't work (only initial packet is translated). filter table OUTPUT works but won't re-route the packet after translation. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: nfnetlink_queue: fix incorrect initialization of copy range fieldPablo Neira Ayuso2013-03-151-1/+1
| | | | | | | | | | | | | | | | 2^16 = 0xffff, not 0xfffff (note the extra 'f'). Not dangerous since you adjust it to min_t(data_len, skb->len) just after on. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: nf_conntrack: register pernet subsystem before register L4 protoGao feng2013-03-154-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In (c296bb4 netfilter: nf_conntrack: refactor l4proto support for netns) the l4proto gre/dccp/udplite/sctp registration happened before the pernet subsystem, which is wrong. Register pernet subsystem before register L4proto since after register L4proto, init_conntrack may try to access the resources which allocated in register_pernet_subsys. Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | Merge tag 'for-linus-v3.9-rc4' of git://oss.sgi.com/xfs/xfsLinus Torvalds2013-03-192-2/+8
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull XFS fixes from Ben Myers: - Fix for a potential infinite loop which was introduced in commit 4d559a3bcb73 ("xfs: limit speculative prealloc near ENOSPC thresholds") - Fix for the return type of xfs_iomap_eof_prealloc_initial_size from commit a1e16c26660b ("xfs: limit speculative prealloc size on sparse files") - Fix for a failed buffer readahead causing subsequent callers to fail incorrectly * tag 'for-linus-v3.9-rc4' of git://oss.sgi.com/xfs/xfs: xfs: ensure we capture IO errors correctly xfs: fix xfs_iomap_eof_prealloc_initial_size type xfs: fix potential infinite loop in xfs_iomap_prealloc_size()
| * | xfs: ensure we capture IO errors correctlyDave Chinner2013-03-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Failed buffer readahead can leave the buffer in the cache marked with an error. Most callers that then issue a subsequent read on the buffer do not zero the b_error field out, and so we may incorectly detect an error during IO completion due to the stale error value left on the buffer. Avoid this problem by zeroing the error before IO submission. This ensures that the only IO errors that are detected those captured from are those captured from bio submission or completion. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit c163f9a1760229a95d04e37b332de7d5c1c225cd)
| * | xfs: fix xfs_iomap_eof_prealloc_initial_size typeMark Tinguely2013-03-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the return type of xfs_iomap_eof_prealloc_initial_size() to xfs_fsblock_t to reflect the fact that the return value may be an unsigned 64 bits if XFS_BIG_BLKNOS is defined. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit e8108cedb1c5d1dc359690d18ca997e97a0061d2)
| * | xfs: fix potential infinite loop in xfs_iomap_prealloc_size()Brian Foster2013-03-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If freesp == 0, we could end up in an infinite loop while squashing the preallocation. Break the loop when we've killed the prealloc entirely. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit e78c420bfc2608bb5f9a0b9165b1071c1e31166a)
* | | PCI: Use ROM images from firmware only if no other ROM source availableMatthew Garrett2013-03-191-20/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mantas Mikulėnas reported that his graphics hardware failed to initialise after commit f9a37be0f02a ("x86: Use PCI setup data"). The aim of this commit was to ensure that ROM images were available on some Apple systems that don't expose the GPU ROM via any other source. In this case, UEFI appears to have provided a broken ROM image that we were using even though there was a perfectly valid ROM available via other sources. The simplest way to handle this seems to be to just re-order pci_map_rom() and leave any firmare-supplied ROM to last. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Tested-by: Mantas Mikulėnas <grawity@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds2013-03-196-36/+66
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull sparc fixes from David Miller: "Just some minor fixups, a sunsu console setup panic cure, and recognition of a Fujitsu sun4v cpu." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: remove unused "config BITS" sparc: delete "if !ULTRA_HAS_POPULATION_COUNT" sparc64: correctly recognize SPARC64-X chips sparc,leon: fix GRPCI2 device0 PCI config space access sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option
| * | | sparc: remove unused "config BITS"Paul Bolle2013-03-191-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sparc's asm/module.h got removed in commit 786d35d45cc40b2a51a18f73e14e135d47fdced7 ("Make most arch asm/module.h files use asm-generic/module.h"). That removed the only two uses of this Kconfig symbol. So we can remove its entry too. > >From arch/sparc/Makefile: > ifeq ($(CONFIG_SPARC32),y) > [...] > > [...] > export BITS := 32 > [...] > > else > [...] > > [...] > export BITS := 64 > [...] > > So $(BITS) is set depending on whether CONFIG_SPARC32 is set or not. > Using $(BITS) in sparc's Makefiles is not using CONFIG_BITS. That > doesn't count as usage of "config BITS". Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | sparc: delete "if !ULTRA_HAS_POPULATION_COUNT"Paul Bolle2013-03-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2d78d4beb64eb07d50665432867971c481192ebf ("[PATCH] bitops: sparc64: use generic bitops") made the default of GENERIC_HWEIGHT depend on !ULTRA_HAS_POPULATION_COUNT. But since there's no Kconfig symbol with that name, this always evaluates to true. Delete this dependency. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | sparc64: correctly recognize SPARC64-X chipsAllen Pais2013-03-113-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch adds support for correctly recognizing SPARC-X chips. cpu : Unknown SUN4V CPU fpu : Unknown SUN4V FPU pmu : Unknown SUN4V PMU Signed-off-by: Katayama Yoshihiro <kata1@jp.fujitsu.com> Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | sparc,leon: fix GRPCI2 device0 PCI config space accessDaniel Hellstrom2013-03-021-15/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bus=0 slot=0 (device0) was used internally by the PCI host driver to access the PCI host controller itself, however that had the effect that PCI device0 was never accessible, which is wrong when the motherboard has connected PCI AD16 signal to a slot. A special case for accessing the PCI host controller itself is added with this patch, by setting bus to TGT. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline optionTkhai Kirill2013-03-011-12/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a machine has X (X < 4) sunsu ports and cmdline option "console=ttySY" is passed, where X < Y <= 4, than the following panic happens: Unable to handle kernel NULL pointer dereference TPC: <sunsu_console_setup+0x78/0xe0> RPC: <sunsu_console_setup+0x74/0xe0> I7: <register_console+0x378/0x3e0> Call Trace: [0000000000453a38] register_console+0x378/0x3e0 [0000000000576fa0] uart_add_one_port+0x2e0/0x340 [000000000057af40] su_probe+0x160/0x2e0 [00000000005b8a4c] platform_drv_probe+0xc/0x20 [00000000005b6c2c] driver_probe_device+0x12c/0x220 [00000000005b6da8] __driver_attach+0x88/0xa0 [00000000005b4df4] bus_for_each_dev+0x54/0xa0 [00000000005b5a54] bus_add_driver+0x154/0x260 [00000000005b7190] driver_register+0x50/0x180 [00000000006d250c] sunsu_init+0x18c/0x1e0 [00000000006c2668] do_one_initcall+0xe8/0x160 [00000000006c282c] kernel_init_freeable+0x12c/0x1e0 [0000000000603764] kernel_init+0x4/0x100 [0000000000405f64] ret_from_syscall+0x1c/0x2c [0000000000000000] (null) 1)Fix the panic; 2)Increment registered port number every successful probe. Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> CC: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge tag 'arm64-fixes' of ↵Linus Torvalds2013-03-196-15/+3
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: - Fix !SMP build error. - Fix padding computation in struct ucontext (no ABI change). - Minor clean-up after the signal patches (unused var). - Two old Kconfig options clean-up. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED arm64: fix padding computation in struct ucontext arm64: Fix build error with !SMP arm64: Removed unused variable in compat_setup_rt_frame()
| * | | | arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORSPaul Bolle2013-03-192-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig entry for DEBUG_ERRORS is a verbatim copy of the former arm entry for that symbol. It got removed in v2.6.39 because it wasn't actually used anywhere. There are still no users of DEBUG_ERRORS so remove this entry too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> [catalin.marinas@arm.com: removed option from defconfig] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | | arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATEDPaul Bolle2013-03-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Config option GENERIC_HARDIRQS_NO_DEPRECATED was removed in commit 78c89825649a9a5ed526c507603196f467d781a5 ("genirq: Remove the now obsolete config options and select statements"), but the select was accidentally reintroduced in commit 8c2c3df31e3b87cb5348e48776c366ebd1dc5a7a ("arm64: Build infrastructure"). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | | arm64: fix padding computation in struct ucontextAndreas Schwab2013-03-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The expression to compute the padding needed to fill the uc_sigmask field to 1024 bits actually computes the padding needed for 1080 bits. Fortunately, due to the 16-byte alignment of the following field (uc_mcontext) the definition in glibc contains enough bytes of padding after uc_sigmask so that the overall offsets and size match in both definitions. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | | arm64: Fix build error with !SMPCatalin Marinas2013-03-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The __atomic_hash is only defined when SMP is enabled but the arm64ksyms.c exports it even for the UP case. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | | arm64: Removed unused variable in compat_setup_rt_frame()Catalin Marinas2013-03-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent clean-up of the compat signal code left an unused 'stack' variable. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2013-03-1958-244/+387
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Fix ARM BPF JIT handling of negative 'k' values, from Chen Gang. 2) Insufficient space reserved for bridge netlink values, fix from Stephen Hemminger. 3) Some dst_neigh_lookup*() callers don't interpret error pointer correctly, fix from Zhouyi Zhou. 4) Fix transport match in SCTP active_path loops, from Xugeng Zhang. 5) Fix qeth driver handling of multi-order SKB frags, from Frank Blaschka. 6) fec driver is missing napi_disable() call, resulting in crashes on unload, from Georg Hofmann. 7) Don't try to handle PMTU events on a listening socket, fix from Eric Dumazet. 8) Fix timestamp location calculations in IP option processing, from David Ward. 9) FIB_TABLE_HASHSZ setting is not controlled by the correct kconfig tests, from Denis V Lunev. 10) Fix TX descriptor push handling in SFC driver, from Ben Hutchings. 11) Fix isdn/hisax and tulip/de4x5 kconfig dependencies, from Arnd Bergmann. 12) bnx2x statistics don't handle 4GB rollover correctly, fix from Maciej Żenczykowski. 13) Openvswitch bug fixes for vport del/new error reporting, missing genlmsg_end() call in netlink processing, and mis-parsing of LLC/SNAP ethernet types. From Rich Lane. 14) SKB pfmemalloc state should only be propagated from the head page of a compound page, fix from Pavel Emelyanov. 15) Fix link handling in tg3 driver for 5715 chips when autonegotation is disabled. From Nithin Sujir. 16) Fix inverted test of cpdma_check_free_tx_desc return value in davinci_emac driver, from Mugunthan V N. 17) vlan_depth is incorrectly calculated in skb_network_protocol(), from Li RongQing. 18) Fix probing of Gobi 1K devices in qmi_wwan driver, and fix NCM device mode backwards compat in cdc_ncm driver. From Bjørn Mork. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) inet: limit length of fragment queue hash table bucket lists qeth: Fix scatter-gather regression qeth: Fix invalid router settings handling qeth: delay feature trace tcp: dont handle MTU reduction on LISTEN socket bnx2x: fix occasional statistics off-by-4GB error vhost/net: fix heads usage of ubuf_info bridge: Add support for setting BR_ROOT_BLOCK flag. bnx2x: add missing napi deletion in error path drivers: net: ethernet: ti: davinci_emac: fix usage of cpdma_check_free_tx_desc() ethernet/tulip: DE4x5 needs VIRT_TO_BUS isdn: hisax: netjet requires VIRT_TO_BUS net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibility rtnetlink: Mask the rta_type when range checking Revert "ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally" Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug smsc75xx: configuration help incorrectly mentions smsc95xx net: fec: fix missing napi_disable call net: fec: restart the FEC when PHY speed changes skb: Propagate pfmemalloc on skb from head page only ...
| * | | | | inet: limit length of fragment queue hash table bucket listsHannes Frederic Sowa2013-03-195-16/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces a constant limit of the fragment queue hash table bucket list lengths. Currently the limit 128 is choosen somewhat arbitrary and just ensures that we can fill up the fragment cache with empty packets up to the default ip_frag_high_thresh limits. It should just protect from list iteration eating considerable amounts of cpu. If we reach the maximum length in one hash bucket a warning is printed. This is implemented on the caller side of inet_frag_find to distinguish between the different users of inet_fragment.c. I dropped the out of memory warning in the ipv4 fragment lookup path, because we already get a warning by the slab allocator. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jesper Dangaard Brouer <jbrouer@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | qeth: Fix scatter-gather regressionFrank Blaschka2013-03-193-8/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a scatter-gather regression introduced with commit 5640f768 net: use a per task frag allocator Now the qeth driver can cope with bigger framents and split a fragment in sub framents if required. Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | qeth: Fix invalid router settings handlingStefan Raspl2013-03-192-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Give a bad return code when specifying a router setting that is either invalid or not support on the respective device type. In addition, fall back the previous setting instead of silently switching back to 'no routing'. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | qeth: delay feature traceStefan Raspl2013-03-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Delay tracing of the card features until the optional commands have been enabled. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | tcp: dont handle MTU reduction on LISTEN socketEric Dumazet2013-03-182-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an ICMP ICMP_FRAG_NEEDED (or ICMPV6_PKT_TOOBIG) message finds a LISTEN socket, and this socket is currently owned by the user, we set TCP_MTU_REDUCED_DEFERRED flag in listener tsq_flags. This is bad because if we clone the parent before it had a chance to clear the flag, the child inherits the tsq_flags value, and next tcp_release_cb() on the child will decrement sk_refcnt. Result is that we might free a live TCP socket, as reported by Dormando. IPv4: Attempt to release TCP socket in state 1 Fix this issue by testing sk_state against TCP_LISTEN early, so that we set TCP_MTU_REDUCED_DEFERRED on appropriate sockets (not a LISTEN one) This bug was introduced in commit 563d34d05786 (tcp: dont drop MTU reduction indications) Reported-by: dormando <dormando@rydia.net> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | bnx2x: fix occasional statistics off-by-4GB errorMaciej Żenczykowski2013-03-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UPDATE_QSTAT function introduced on February 15, 2012 in commit 1355b704b9ba "bnx2x: consistent statistics after internal driver reload" incorrectly fails to handle overflow during addition of the lower 32-bit field of a stat. This bug is present since 3.4-rc1 and should thus be considered a candidate for stable 3.4+ releases. Google-Bug-Id: 8374428 Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: Mintz Yuval <yuvalmin@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | vhost/net: fix heads usage of ubuf_infoMichael S. Tsirkin2013-03-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ubuf info allocator uses guest controlled head as an index, so a malicious guest could put the same head entry in the ring twice, and we will get two callbacks on the same value. To fix use upend_idx which is guaranteed to be unique. Reported-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | bridge: Add support for setting BR_ROOT_BLOCK flag.Vlad Yasevich2013-03-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the support was already there. The only thing that was missing was the call to set the flag. Add this call. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | bnx2x: add missing napi deletion in error pathMichal Schmidt2013-03-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the hardware initialization fails in bnx2x_nic_load() after adding napi objects, they would not be deleted. A subsequent attempt to unload the bnx2x module detects a corruption in the napi list. Add the missing napi deletion to the error path. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | Merge branch 'for-davem' of ↵David S. Miller2013-03-178-76/+108
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== On the NFC bits, Samuel says: "With this one we have: - A fix for properly decreasing socket ack log. - A timer and works cleanup upon NFC device removal. - A monitoroing socket cleanup round from llcp_socket_release. - A proper error report to pending sockets upon NFC device removal." Regarding the Bluetooth bits, Gustavo says: "I have these two patches for 3.9, these add support for two more devices to the bluetooth drivers." Along with those, we have a few wireless driver fixes... Bing Zhao provides an mwifiex to prevent an out-of-bounds memory access. John Crispin offers a Kconfig fix to enable some otherwise dead code in rt2x00. The correct symbols were added in -rc1 through a different tree, but the symbols for enabling the wireless driver didn't match. Larry Finger brings an rtlwifi fix for a scheduling while atomic bug, and another fix for a reassociation problem caused by failing to clear the BSSID after a disconnect. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * \ \ \ \ Merge branch 'master' of ↵John W. Linville2013-03-158-76/+108
| | |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| | | * | | | | rtlwifi: rtl8192cu: Fix problem that prevents reassociationLarry Finger2013-03-131-52/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was failing to clear the BSSID when a disconnect happened. That prevented a reconnection. This problem is reported at https://bugzilla.redhat.com/show_bug.cgi?id=789605, https://bugzilla.redhat.com/show_bug.cgi?id=866786, https://bugzilla.redhat.com/show_bug.cgi?id=906734, and https://bugzilla.kernel.org/show_bug.cgi?id=46171. Thanks to Jussi Kivilinna for making the critical observation that led to the solution. Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Tested-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Tested-by: Alessandro Lannocca <alessandro.lannocca@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * | | | | rt2x00: fix rt2x00 to work with the new ralink SoC config symbolsJohn Crispin2013-03-132-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since v3.9-rc1 the kernel has basic support for Ralink WiSoC. The config symbols are named slightly different than before. Fix the rt2x00 to match the new symbols. The commit causing this breakage is: commit ae2b5bb6570481b50a7175c64176b82da0a81836 Author: John Crispin <blogic@openwrt.org> Date: Sun Jan 20 22:05:30 2013 +0100 MIPS: ralink: adds Kbuild files Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * | | | | Merge branch 'for-upstream' of ↵John W. Linville2013-03-132-0/+6
| | | |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
| | | | * | | | | Bluetooth: Device 0cf3:3008 should map AR 3012Sunguk Lee2013-03-112-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=3008 Rev= 0.01 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Sunguk Lee <d3m3vilurr@gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
| | | | * | | | | Bluetooth: Add support for atheros 04ca:3004 device to ath3kJosh Boyer2013-02-202-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Yet another version of the atheros bluetooth chipset T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3004 Rev=00.01 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb This resolves https://bugzilla.redhat.com/show_bug.cgi?id=844750 Reported-by: niktr@mail.ru Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
| | | * | | | | | Merge tag 'nfc-fixes-3.9-1' of ↵John W. Linville2013-03-112-9/+55
| | | |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes Samuel Ortiz <sameo@linux.intel.com> says: This is the first NFC pull request for 3.9 fixes With this one we have: - A fix for properly decreasing socket ack log. - A timer and works cleanup upon NFC device removal. - A monitoroing socket cleanup round from llcp_socket_release. - A proper error report to pending sockets upon NFC device removal. Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | | * | | | | | NFC: llcp: Report error to pending sockets when a device is removedSamuel Ortiz2013-03-081-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | | | * | | | | | NFC: llcp: Clean raw sockets from nfc_llcp_socket_releaseSamuel Ortiz2013-03-081-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | | | * | | | | | NFC: llcp: Clean local timers and works when removing a deviceSamuel Ortiz2013-03-081-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Whenever an adapter is removed we must clean all the local structures, especially the timers and scheduled work. Otherwise those asynchronous threads will eventually try to access the freed nfc_dev pointer if an LLCP link is up. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | | | * | | | | | NFC: llcp: Decrease socket ack log when accepting a connectionSamuel Ortiz2013-03-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is really difficult to test with real NFC devices, but without this fix an LLCP server will eventually refuse new connections. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| | | * | | | | | | rtlwifi: rtl8192cu: Fix schedule while atomic bug splatLarry Finger2013-03-081-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When run at debug 3 or higher, rtl8192cu reports a BUG as follows: BUG: scheduling while atomic: kworker/u:0/5281/0x00000002 INFO: lockdep is turned off. Modules linked in: rtl8192cu rtl8192c_common rtlwifi fuse af_packet bnep bluetooth b43 mac80211 cfg80211 ipv6 snd_hda_codec_conexant kvm_amd k vm snd_hda_intel snd_hda_codec bcma rng_core snd_pcm ssb mmc_core snd_seq snd_timer snd_seq_device snd i2c_nforce2 sr_mod pcmcia forcedeth i2c_core soundcore cdrom sg serio_raw k8temp hwmon joydev ac battery pcmcia_core snd_page_alloc video button wmi autofs4 ext4 mbcache jbd2 crc16 thermal processor scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic pata_acpi pata_amd [last unloaded: rtlwifi] Pid: 5281, comm: kworker/u:0 Tainted: G W 3.8.0-wl+ #119 Call Trace: [<ffffffff814531e7>] __schedule_bug+0x62/0x70 [<ffffffff81459af0>] __schedule+0x730/0xa30 [<ffffffff81326e49>] ? usb_hcd_link_urb_to_ep+0x19/0xa0 [<ffffffff8145a0d4>] schedule+0x24/0x70 [<ffffffff814575ec>] schedule_timeout+0x18c/0x2f0 [<ffffffff81459ec0>] ? wait_for_common+0x40/0x180 [<ffffffff8133f461>] ? ehci_urb_enqueue+0xf1/0xee0 [<ffffffff810a579d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81459f65>] wait_for_common+0xe5/0x180 [<ffffffff8107d1c0>] ? try_to_wake_up+0x2d0/0x2d0 [<ffffffff8145a08e>] wait_for_completion_timeout+0xe/0x10 [<ffffffff8132ab1c>] usb_start_wait_urb+0x8c/0x100 [<ffffffff8132adf9>] usb_control_msg+0xd9/0x130 [<ffffffffa057dd8d>] _usb_read_sync+0xcd/0x140 [rtlwifi] [<ffffffffa057de0e>] _usb_read32_sync+0xe/0x10 [rtlwifi] [<ffffffffa04b0555>] rtl92cu_update_hal_rate_table+0x1a5/0x1f0 [rtl8192cu] The cause is a synchronous read from routine rtl92cu_update_hal_rate_table(). The resulting output is not critical, thus the debug statement is deleted. Reported-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud