summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys()Roger Quadros2013-04-022-2/+167
| | | | | | | | | This helper allows board support code to add the PHY's VCC and RESET regulators which are GPIO controlled as well as the NOP PHY device. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* usb: phy: nop: Add some parameters to platform dataRoger Quadros2013-03-181-0/+5
| | | | | | | | | | | | | Add clk_rate parameter to platform data. If supplied, the NOP phy driver will program the clock to that rate during probe. Also add 2 flags, needs_vcc and needs_reset. If the flag is set and the regulator couldn't be found then the driver will bail out with -EPROBE_DEFER. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Linux 3.9-rc3v3.9-rc3Linus Torvalds2013-03-171-1/+1
|
* perf,x86: fix link failure for non-Intel configsDavid Rientjes2013-03-171-1/+5
| | | | | | | | | | | | | | | Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") introduces a link failure since perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL: arch/x86/power/built-in.o: In function `restore_processor_state': (.text+0x45c): undefined reference to `perf_restore_debug_store' Fix it by defining the dummy function appropriately. Signed-off-by: David Rientjes <rientjes@google.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* perf,x86: fix wrmsr_on_cpu() warning on suspend/resumeLinus Torvalds2013-03-171-1/+3
| | | | | | | | | | | | | | | | | | | | | Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") fixed a crash when doing PEBS performance profiling after resuming, but in using init_debug_store_on_cpu() to restore the DS_AREA mtrr it also resulted in a new WARN_ON() triggering. init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU cross-calls to do the MSR update. Which is not really valid at the early resume stage, and the warning is quite reasonable. Now, it all happens to _work_, for the simple reason that smp_call_function_single() ends up just doing the call directly on the CPU when the CPU number matches, but we really should just do the wrmsr() directly instead. This duplicates the wrmsr() logic, but hopefully we can just remove the wrmsr_on_cpu() version eventually. Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2013-03-177-12/+25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Eric's rcu barrier patch fixes a long standing problem with our unmount code hanging on to devices in workqueue helpers. Liu Bo nailed down a difficult assertion for in-memory extent mappings." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix warning of free_extent_map Btrfs: fix warning when creating snapshots Btrfs: return as soon as possible when edquot happens Btrfs: return EIO if we have extent tree corruption btrfs: use rcu_barrier() to wait for bdev puts at unmount Btrfs: remove btrfs_try_spin_lock Btrfs: get better concurrency for snapshot-aware defrag work
| * Btrfs: fix warning of free_extent_mapLiu Bo2013-03-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Users report that an extent map's list is still linked when it's actually going to be freed from cache. The story is that a) when we're going to drop an extent map and may split this large one into smaller ems, and if this large one is flagged as EXTENT_FLAG_LOGGING which means that it's on the list to be logged, then the smaller ems split from it will also be flagged as EXTENT_FLAG_LOGGING, and this is _not_ expected. b) we'll keep ems from unlinking the list and freeing when they are flagged with EXTENT_FLAG_LOGGING, because the log code holds one reference. The end result is the warning, but the truth is that we set the flag EXTENT_FLAG_LOGGING only during fsync. So clear flag EXTENT_FLAG_LOGGING for extent maps split from a large one. Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Reported-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
| * Btrfs: fix warning when creating snapshotsLiu Bo2013-03-141-6/+5
| | | | | | | | | | | | | | | | | | | | | | Creating snapshot passes extent_root to commit its transaction, but it can lead to the warning of checking root for quota in the __btrfs_end_transaction() when someone else is committing the current transaction. Since we've recorded the needed root in trans_handle, just use it to get rid of the warning. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
| * Btrfs: return as soon as possible when edquot happensWang Shilong2013-03-141-4/+6
| | | | | | | | | | | | | | | | | | If one of qgroup fails to reserve firstly, we should return immediately, it is unnecessary to continue check. Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
| * Btrfs: return EIO if we have extent tree corruptionJosef Bacik2013-03-141-1/+4
| | | | | | | | | | | | | | | | | | | | | | The callers of lookup_inline_extent_info all handle getting an error back properly, so return an error if we have corruption instead of being a jerk and panicing. Still WARN_ON() since this is kind of crucial and I've been seeing it a bit too much recently for my taste, I think we're doing something wrong somewhere. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
| * btrfs: use rcu_barrier() to wait for bdev puts at unmountEric Sandeen2013-03-141-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Doing this would reliably fail with -EBUSY for me: # mount /dev/sdb2 /mnt/scratch; umount /mnt/scratch; mkfs.btrfs -f /dev/sdb2 ... unable to open /dev/sdb2: Device or resource busy because mkfs.btrfs tries to open the device O_EXCL, and somebody still has it. Using systemtap to track bdev gets & puts shows a kworker thread doing a blkdev put after mkfs attempts a get; this is left over from the unmount path: btrfs_close_devices __btrfs_close_devices call_rcu(&device->rcu, free_device); free_device INIT_WORK(&device->rcu_work, __free_device); schedule_work(&device->rcu_work); so unmount might complete before __free_device fires & does its blkdev_put. Adding an rcu_barrier() to btrfs_close_devices() causes unmount to wait until all blkdev_put()s are done, and the device is truly free once unmount completes. Cc: stable@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
| * Btrfs: remove btrfs_try_spin_lockLiu Bo2013-03-141-1/+0
| | | | | | | | | | | | | | | | Remove a useless function declaration Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
| * Btrfs: get better concurrency for snapshot-aware defrag workLiu Bo2013-03-141-0/+3
| | | | | | | | | | | | | | | | | | Using spinning case instead of blocking will result in better concurrency overall. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* | Merge branch 'kbuild' of ↵Linus Torvalds2013-03-151-5/+6
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fix from Michal Marek: "One fix for for make headers_install/headers_check to not require make 3.81. The requirement has been accidentally introduced in 3.7." * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: fix make headers_check with make 3.80
| * | kbuild: fix make headers_check with make 3.80Sam Ravnborg2013-03-051-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 10b63956 ("UAPI: Plumb the UAPI Kbuilds into the user header installation and checking") introduced a dependency of make 3.81 due to use of $(or ...) We do not want to lift the requirement to gmake 3.81 just yet... Included are a straightforward conversion to $(if ...) Bisected-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: <stable@vger.kernel.org> [v3.7+] Signed-off-by: Michal Marek <mmarek@suse.cz>
* | | Merge tag 'for-3.9-rc3' of git://openrisc.net/jonas/linuxLinus Torvalds2013-03-153-8/+11
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull OpenRISC bug fixes from Jonas Bonn: - The GPIO descriptor work has exposed how broken the non-GPIOLIB bits for OpenRISC were. We now require GPIOLIB as this is the preferred way forward. - The system.h split introduced a bug in llist.h for arches using asm-generic/cmpxchg.h directly, which is currently only OpenRISC. The patch here moves two defines from asm-generic/atomic.h to asm-generic/cmpxchg.h to make things work as they should. - The VIRT_TO_BUS selector was added for OpenRISC, but OpenRISC does not have the virt_to_bus methods, so there's a patch to remove it again. * tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux: openrisc: remove HAVE_VIRT_TO_BUS asm-generic: move cmpxchg*_local defs to cmpxchg.h openrisc: require gpiolib
| * | | openrisc: remove HAVE_VIRT_TO_BUSJonas Bonn2013-03-131-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | The OpenRISC arch doesn't actually have the virt_to_bus methods Signed-off-by: Jonas Bonn <jonas@southpole.se>
| * | | asm-generic: move cmpxchg*_local defs to cmpxchg.hJonas Bonn2013-03-132-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | asm/cmpxchg.h can be included on its own and needs to be self-consistent. The definitions for the cmpxchg*_local macros, as such, need to be part of this file. This fixes a build issue on OpenRISC since the system.h smashing patch 96f951edb1f1bdbbc99b0cd458f9808bb83d58ae that introdued the direct inclusion asm/cmpxchg.h into linux/llist.h. CC: David Howells <dhowells@redhat.com> Signed-off-by: Jonas Bonn <jonas@southpole.se> Acked-by: Arnd Bergmann <arnd@arndb.de>
| * | | openrisc: require gpiolibJonas Bonn2013-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent move to GPIO descriptors breaks the OpenRISC build. Requiring gpiolib resolves this; using gpiolib exclusively is also the recommended way forward for all arches by the developers working on these GPIO changes. The non-gpiolib implementation for OpenRISC never worked anyway... Signed-off-by: Jonas Bonn <jonas@southpole.se>
* | | | Merge tag 'char-misc-3.9-rc2' of ↵Linus Torvalds2013-03-157-7/+10
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg Kroah-Hartman: "Here are some tiny fixes for the w1 drivers and the final removal patch for getting rid of CONFIG_EXPERIMENTAL (all users of it are now gone from your tree, this just drops the Kconfig item itself.) All have been in the linux-next tree for a while" * tag 'char-misc-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: final removal of CONFIG_EXPERIMENTAL w1: fix oops when w1_search is called from netlink connector w1-gpio: fix unused variable warning w1-gpio: remove erroneous __exit and __exit_p() ARM: w1-gpio: fix erroneous gpio requests
| * | | | final removal of CONFIG_EXPERIMENTALKees Cook2013-03-121-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove "config EXPERIMENTAL" itself, now that every "depends on" it has been removed from the tree. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | w1: fix oops when w1_search is called from netlink connectorMarcin Jurkowski2013-03-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Sat, Mar 02, 2013 at 10:45:10AM +0100, Sven Geggus wrote: > This is the bad commit I found doing git bisect: > 04f482faf50535229a5a5c8d629cf963899f857c is the first bad commit > commit 04f482faf50535229a5a5c8d629cf963899f857c > Author: Patrick McHardy <kaber@trash.net> > Date: Mon Mar 28 08:39:36 2011 +0000 Good job. I was too lazy to bisect for bad commit;) Reading the code I found problematic kthread_should_stop call from netlink connector which causes the oops. After applying a patch, I've been testing owfs+w1 setup for nearly two days and it seems to work very reliable (no hangs, no memleaks etc). More detailed description and possible fix is given below: Function w1_search can be called from either kthread or netlink callback. While the former works fine, the latter causes oops due to kthread_should_stop invocation. This patch adds a check if w1_search is serving netlink command, skipping kthread_should_stop invocation if so. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Josh Boyer <jwboyer@gmail.com> Tested-by: Sven Geggus <lists@fuchsschwanzdomain.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> # 3.0+
| * | | | w1-gpio: fix unused variable warningJohan Hovold2013-03-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8a1861d997 ("w1-gpio: Simplify & get rid of defines") removed the compile guards from the device-tree id table, thereby generating a warning when building without device-tree support. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | w1-gpio: remove erroneous __exit and __exit_p()Johan Hovold2013-03-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8a1861d997 ("w1-gpio: Simplify & get rid of defines") changed (apparently unknowingly) the driver to a hotpluggable platform-device driver but did not not update the section markers for probe and remove (to __devinit/exit, which have since been removed). A later commit fixed the section mismatch for probe, but left remove marked with __exit. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> # 3.8 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | ARM: w1-gpio: fix erroneous gpio requestsJohan Hovold2013-03-124-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix regression introduced by commit d2323cf773 ("onewire: w1-gpio: add ext_pullup_enable pin in platform data") which added a gpio entry to the platform data, but did not add the required initialisers to the board files using it. Consequently, the driver would request gpio 0 at probe, which could break other uses of the corresponding pin. On AT91 requesting gpio 0 changes the pin muxing for PIOA0, which, for instance, breaks SPI0 on at91sam9g20. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | | Merge tag 'sound-3.9' of ↵Linus Torvalds2013-03-158-28/+89
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes, as expected for the middle rc: - A couple of fixes for potential NULL dereferences and out-of-range array accesses revealed by static code parsers - A fix for the wrong error handling detected by trinity - A regression fix for missing audio on some MacBooks - CA0132 DSP loader fixes - Fix for EAPD control of IDT codecs on machines w/o speaker - Fix a regression in the HD-audio widget list parser code - Workaround for the NuForce UDH-100 USB audio" * tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs sound: sequencer: cap array index in seq_chn_common_event() ALSA: hda/ca0132 - Remove extra setting of dsp_state. ALSA: hda/ca0132 - Check download state of DSP. ALSA: hda/ca0132 - Check if dspload_image succeeded. ALSA: hda - Disable IDT eapd_switch if there are no internal speakers ALSA: hda - Fix snd_hda_get_num_raw_conns() to return a correct value ALSA: usb-audio: add a workaround for the NuForce UDH-100 ALSA: asihpi - fix potential NULL pointer dereference ALSA: seq: Fix missing error handling in snd_seq_timer_open()
| * | | | | ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecsTakashi Iwai2013-03-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During the transition to the generic parser, the hook to the codec specific automute function was forgotten. This resulted in the silent output on some MacBooks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | sound: sequencer: cap array index in seq_chn_common_event()Dan Carpenter2013-03-151-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "chn" here is a number between 0 and 255, but ->chn_info[] only has 16 elements so there is a potential write beyond the end of the array. If the seq_mode isn't SEQ_2 then we let the individual drivers (either opl3.c or midi_synth.c) handle it. Those functions all do a bounds check on "chn" so I haven't changed anything here. The opl3.c driver has up to 18 channels and not 16. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: hda/ca0132 - Remove extra setting of dsp_state.Dylan Reid2013-03-151-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spec->dsp_state is initialized to DSP_DOWNLOAD_INIT, no need to reset and check it in ca0132_download_dsp(). Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: hda/ca0132 - Check download state of DSP.Dylan Reid2013-03-151-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of using the dspload_is_loaded() function, check the dsp_state that is kept in the spec. The dspload_is_loaded() function returns true if the DSP transfer was never started. This false-positive leads to multiple second delays when ca0132_setup_efaults() times out on each write. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: hda/ca0132 - Check if dspload_image succeeded.Dylan Reid2013-03-151-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If dspload_image() fails, it was ignored and dspload_wait_loaded() was still called. dsp_loaded should never be set to true in this case, skip it. The check in dspload_wait_loaded() return true if the DSP is loaded or if it never started. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: hda - Disable IDT eapd_switch if there are no internal speakersDavid Henningsson2013-03-141-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If there are no internal speakers, we should not turn the eapd switch off, because it might be necessary to keep high for Headphone. BugLink: https://bugs.launchpad.net/bugs/1155016 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: hda - Fix snd_hda_get_num_raw_conns() to return a correct valueTakashi Iwai2013-03-121-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the connection list expansion in hda_codec.c and hda_proc.c, the value returned from snd_hda_get_num_raw_conns() is used as the array size to store the connection list. However, the function returns simply a raw value of the AC_PAR_CONNLIST_LEN parameter, and the widget list with ranges isn't considered there. Thus it may return a smaller size than the actual list, which results in -ENOSPC in snd_hda_get_raw_conections(). This patch fixes the bug by parsing the connection list correctly also for snd_hda_get_num_raw_conns(). Reported-and-tested-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: usb-audio: add a workaround for the NuForce UDH-100Clemens Ladisch2013-03-121-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NuForce UDH-100 numbers its interfaces incorrectly, which makes the interface associations come out wrong, which results in the driver erroring out with the message "Audio class v2 interfaces need an interface association". Work around this by searching for the interface association descriptor also in some other place where it might have ended up. Reported-and-tested-by: Dave Helstroom <helstroom@google.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: asihpi - fix potential NULL pointer dereferenceWei Yongjun2013-03-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dereference should be moved below the NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | ALSA: seq: Fix missing error handling in snd_seq_timer_open()Takashi Iwai2013-03-111-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | snd_seq_timer_open() didn't catch the whole error path but let through if the timer id is a slave. This may lead to Oops by accessing the uninitialized pointer. BUG: unable to handle kernel NULL pointer dereference at 00000000000002ae IP: [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 PGD 785cd067 PUD 76964067 PMD 0 Oops: 0002 [#4] SMP CPU 0 Pid: 4288, comm: trinity-child7 Tainted: G D W 3.9.0-rc1+ #100 Bochs Bochs RIP: 0010:[<ffffffff819b3477>] [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 RSP: 0018:ffff88006ece7d38 EFLAGS: 00010246 RAX: 0000000000000286 RBX: ffff88007851b400 RCX: 0000000000000000 RDX: 000000000000ffff RSI: ffff88006ece7d58 RDI: ffff88006ece7d38 RBP: ffff88006ece7d98 R08: 000000000000000a R09: 000000000000fffe R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8800792c5400 R14: 0000000000e8f000 R15: 0000000000000007 FS: 00007f7aaa650700(0000) GS:ffff88007f800000(0000) GS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002ae CR3: 000000006efec000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process trinity-child7 (pid: 4288, threadinfo ffff88006ece6000, task ffff880076a8a290) Stack: 0000000000000286 ffffffff828f2be0 ffff88006ece7d58 ffffffff810f354d 65636e6575716573 2065756575712072 ffff8800792c0030 0000000000000000 ffff88006ece7d98 ffff8800792c5400 ffff88007851b400 ffff8800792c5520 Call Trace: [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff819b17e9>] snd_seq_queue_timer_open+0x29/0x70 [<ffffffff819ae01a>] snd_seq_ioctl_set_queue_timer+0xda/0x120 [<ffffffff819acb9b>] snd_seq_do_ioctl+0x9b/0xd0 [<ffffffff819acbe0>] snd_seq_ioctl+0x10/0x20 [<ffffffff811b9542>] do_vfs_ioctl+0x522/0x570 [<ffffffff8130a4b3>] ? file_has_perm+0x83/0xa0 [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff811b95ed>] sys_ioctl+0x5d/0xa0 [<ffffffff813663fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81faed69>] system_call_fastpath+0x16/0x1b Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | | | Merge branch 'fixes-for-3.9' of ↵Linus Torvalds2013-03-151-2/+3
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping fix from Marek Szyprowski: "An important fix for all ARM architectures which use ZONE_DMA. Without it dma_alloc_* calls with GFP_ATOMIC flag might have allocated buffers outsize DMA zone." * 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation
| * | | | | | ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocationMarek Szyprowski2013-03-141-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Atomic pool should always be allocated from DMA zone if such zone is available in the system to avoid issues caused by limited dma mask of any of the devices used for making an atomic allocation. Reported-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Stable <stable@vger.kernel.org> [v3.6+]
* | | | | | | Merge tag 'mfd-fixes-3.9-1' of ↵Linus Torvalds2013-03-1516-23/+63
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes Pull MFD fixes from Samuel Ortiz: "This is the first batch of MFD fixes for 3.9. With this one we have: - An ab8500 build failure fix. - An ab8500 device tree parsing fix. - A fix for twl4030_madc remove routine to work properly (when built-in). - A fix for properly registering palmas interrupt handler. - A fix for omap-usb init routine to actually write into the hostconfig register. - A couple of warning fixes for ab8500-gpadc and tps65912" * tag 'mfd-fixes-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes: mfd: twl4030-madc: Remove __exit_p annotation mfd: ab8500: Kill "reg" property from binding mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO mfd: wm831x: Don't forward declare enum wm831x_auxadc mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource() mfd: tps65912: Declare and use tps65912_irq_exit() mfd: palmas: Provide irq flags through DT/platform data mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error mfd: omap-usb-host: Actually update hostconfig
| * | | | | | | mfd: twl4030-madc: Remove __exit_p annotationArnd Bergmann2013-03-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4740f73fe5 "mfd: remove use of __devexit" removed the __devexit annotation on the twl4030_madc_remove function, but left an __exit_p() present on the pointer to this function. Using __exit_p was as wrong with the devexit in place as it is now, but now we get a gcc warning about an unused function. In order for the twl4030_madc_remove to work correctly in built-in code, we have to remove the __exit_p. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | | | | | mfd: ab8500: Kill "reg" property from bindingArnd Bergmann2013-03-125-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ab8500 device is a child of the prcmu device, which is a memory mapped bus device, whose children are addressable using physical memory addresses, not using mailboxes, so a mailbox number in the ab8500 node cannot be parsed by DT. Nothing uses this number, since it was only introduced as part of the failed attempt to clean up prcmu mailbox handling, and we can simply remove it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | | | | | mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDOAxel Lin2013-03-121-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit c8801a8e "regulator: core: Mark all get and enable calls as __must_check", we must check return value of regulator_enable() to silence below build warning. CC drivers/mfd/ab8500-gpadc.o drivers/mfd/ab8500-gpadc.c: In function 'ab8500_gpadc_runtime_resume': drivers/mfd/ab8500-gpadc.c:598:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] drivers/mfd/ab8500-gpadc.c: In function 'ab8500_gpadc_probe': drivers/mfd/ab8500-gpadc.c:655:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] Also convert to devm_regulator_get(), this fixes a missing regulator_put() call in ab8500_gpadc_remove(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | | | | | mfd: wm831x: Don't forward declare enum wm831x_auxadcMark Brown2013-03-122-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can't forward declare enums. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | | | | | mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource()Mark Brown2013-03-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Looks like the conversion to enum was missed for the definition of this function, the declaration has been updated. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | | | | | mfd: tps65912: Declare and use tps65912_irq_exit()Mark Brown2013-03-122-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up interrupts on exit, silencing a sparse warning caused by tps65912_irq_exit() being defined but not prototyped as we go. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | | | | | mfd: palmas: Provide irq flags through DT/platform dataLaxman Dewangan2013-03-122-3/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently driver sets the irq type to IRQF_TRIGGER_LOW which is causing interrupt registration failure in ARM based SoCs as: [ 0.208479] genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0xf0) [ 0.208513] dummy 0-0059: Failed to request IRQ 118: -22 Provide the irq flags through platform data if device is registered through board file or get the irq type from DT node property in place of hardcoding the irq flag in driver to support multiple platforms. Also configure the device to generate the interrupt signal according to flag type. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | | | | | mfd: Make AB8500_CORE select POWER_SUPPLY to fix build errorAxel Lin2013-03-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes below build error when CONFIG_POWER_SUPPLY is not set. drivers/built-in.o: In function `ab8500_power_off': drivers/mfd/ab8500-sysctrl.c:37: undefined reference to `power_supply_get_by_name' drivers/mfd/ab8500-sysctrl.c:53: undefined reference to `power_supply_get_by_name' make: *** [vmlinux] Error 1 Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | | | | | mfd: omap-usb-host: Actually update hostconfigRoger Quadros2013-03-121-3/+3
| |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The helper functions omap_usbhs_rev1_hostconfig() and omap_usbhs_rev2_hostconfig() don't write into the hostconfig register. Make sure that we write the return value into the hostconfig register. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | | | | | | Merge tag 'hwmon-for-linus' of ↵Linus Torvalds2013-03-154-11/+42
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Bug fixes for pmbus, ltc2978, and lineage-pem drivers Added specific maintainer for some hwmon drivers" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pmbus/ltc2978) Fix temperature reporting hwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute() hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes MAINTAINERS: Add maintainer for MAX6697, INA209, and INA2XX drivers
| * | | | | | | hwmon: (pmbus/ltc2978) Fix temperature reportingGuenter Roeck2013-03-141-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On LTC2978, only READ_TEMPERATURE is supported. It reports the internal junction temperature. This register is unpaged. On LTC3880, READ_TEMPERATURE and READ_TEMPERATURE2 are supported. READ_TEMPERATURE is paged and reports external temperatures. READ_TEMPERATURE2 is unpaged and reports the internal junction temperature. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.2+ Acked-by: Jean Delvare <khali@linux-fr.org>
OpenPOWER on IntegriCloud