summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] EDAC: printk cleanupDave Peterson2006-03-268-240/+275
| | | | | | | | | | | | | | | | | | | | | This implements the following idea: On Monday 30 January 2006 19:22, Eric W. Biederman wrote: > One piece missing from this conversation is the issue that we need errors > in a uniform format. That is why edac_mc has helper functions. > > However there will always be errors that don't fit any particular model. > Could we add a edac_printk(dev, ); That is similar to dev_printk but > prints out an EDAC header and the device on which the error was found? > Letting the rest of the string be user specified. > > For actual control that interface may be to blunt, but at least for people > looking in the logs it allows all of the errors to be detected and > harvested. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: switch to kthread_ APIDave Peterson2006-03-261-78/+10
| | | | | | | | | | | | | | | | | This patch was originally posted by Christoph Hellwig (see http://lkml.org/lkml/2006/2/14/331): "Christoph Hellwig" <hch@lst.de> wrote: > Use the kthread_ API instead of opencoding lots of hairy code for kernel > thread creation and teardown, including tasklist_lock abuse. > Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Peterson <dsp@llnl.gov> Cc: <dave_peterson@pobox.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Dead code in drivers/isdn/avm/avmcard.hEric Sesterhenn2006-03-261-3/+1
| | | | | | | | | | This fixes coverity id #2. the if (i==0) is pretty useless, since we assing i=0, just the line before. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - M105 USB DECT adapterHansjoerg Lipp2006-03-262-0/+1605
| | | | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the connection-specific module "usb_gigaset", the hardware driver for Gigaset base stations connected via the M105 USB DECT adapter. It contains the code for handling probe/disconnect, AT command/response transmission, and call setup and termination, as well as handling asynchronous data transfers, PPP framing, byte stuffing, and flow control. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - isochronous data handlerHansjoerg Lipp2006-03-261-0/+1009
| | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the payload data handler for the connection-specific module "bas_gigaset". It contains the code for handling isochronous data transfers, HDLC framing and flow control. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - direct USB connectionHansjoerg Lipp2006-03-261-0/+2365
| | | | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the main source file of the connection-specific module "bas_gigaset", the hardware driver for Gigaset base stations connected directly to the computer via USB. It contains the code for handling probe/disconnect, AT command/response transmission, and call setup and termination. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - procfs interfaceHansjoerg Lipp2006-03-261-0/+81
| | | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the procfs interface to the gigaset module. The procfs interface provides access to status information and statistics about the Gigaset devices. If the drivers are built with the debugging option it also allows to change the amount of debugging output on the fly. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - tty interfaceHansjoerg Lipp2006-03-262-0/+750
| | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the tty interface to the gigaset module. The tty interface provides direct access to the AT command set of the Gigaset devices. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - isdn4linux interfaceHansjoerg Lipp2006-03-261-0/+567
| | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the isdn4linux subsystem interface to the gigaset module. The isdn4linux subsystem interface handles requests from and notifications to the isdn4linux subsystem. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - event layerHansjoerg Lipp2006-03-261-0/+1983
| | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the event layer to the gigaset module. The event layer serializes events from hardware, userspace, and other kernel subsystems. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - common moduleHansjoerg Lipp2006-03-262-0/+2141
| | | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the common include file for the Siemens Gigaset drivers, providing definitions used by all of the Gigaset ISDN driver source files. It also adds the main source file of the gigaset module which manages common functions not specific to the type of connection to the device. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - Kconfigs and MakefilesHansjoerg Lipp2006-03-265-0/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> The following patches add drivers for the Siemens Gigaset 3070 family of ISDN DECT PABXes connected via USB, either directly or over a DECT link using a Gigaset M105 or compatible DECT data adapter. The devices are integrated as ISDN adapters within the isdn4linux framework, supporting incoming and outgoing voice and data connections, and also as tty devices providing access to device specific AT commands. Supported devices include models 3070, 3075, 4170, 4175, SX205, SX255, and SX353 from the Siemens Gigaset product family, as well as the technically identical models 45isdn and 721X from the Deutsche Telekom Sinus series. Supported DECT adapters are the Gigaset M105 data and the technically identical Gigaset USB Adapter DECT, Sinus 45 data 2, and Sinus 721 data (but not the Gigaset M34 and Sinus 702 data which advertise themselves as CDC-ACM devices). These drivers have been developed over the last four years within the SourceForge project http://sourceforge.net/projects/gigaset307x/. They are being used successfully in several installations for dial-in Internet access and for voice call switching with Asterisk. This is our second attempt at submitting these drivers, taking into account the comments we received to our first submission on 2005-12-11. The patch set adds three kernel modules: - a common module "gigaset" encapsulating the common logic for controlling the PABX and the interfaces to userspace and the isdn4linux subsystem. - a connection-specific module "bas_gigaset" which handles communication with the PABX over a direct USB connection. - a connection-specific module "usb_gigaset" which does the same for a DECT connection using the Gigaset M105 USB DECT adapter. We also have a module "ser_gigaset" which supports the Gigaset M101 RS232 DECT adapter, but we didn't judge it fit for inclusion in the kernel, as it does direct programming of a i8250 serial port. It should probably be rewritten as a serial line discipline but so far we lack the neccessary knowledge about writing a line discipline for that. The drivers have been working with kernel releases 2.2 and 2.4 as well as 2.6, and although we took efforts to remove the compatibility code for this submission, it probably still shows in places. Please make allowances. This patch: Prepare the kernel build infrastructure for addition of the Gigaset ISDN drivers. It creates a Makefile and Kconfig file for the Gigaset driver and hooks them into those of the isdn4linux subsystem. It also adds a MAINTAINERS entry for the driver. This patch depends on patches 2 to 9 of the present set, as without the actual source files, activating the options added here will cause the kernel build to fail. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kprobes: fix broken fault handling for sparc64Prasanna S Panchamukhi2006-03-261-6/+60
| | | | | | | | | | | | | | | | | | | | | Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. I could not test this patch for sparc64. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kprobes: fix broken fault handling for ia64Prasanna S Panchamukhi2006-03-261-5/+43
| | | | | | | | | | | | | | | | | | | | Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Acked-by: Anil S Keshavamurthy<anil.s.keshavamurthy@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kprobes: fix broken fault handling for powerpc64Prasanna S Panchamukhi2006-03-261-8/+55
| | | | | | | | | | | | | | | | | | | | Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kprobes: fix broken fault handling for x86_64Prasanna S Panchamukhi2006-03-261-7/+55
| | | | | | | | | | | | | | | | | | | Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kprobes: fix broken fault handling for i386Prasanna S Panchamukhi2006-03-261-7/+50
| | | | | | | | | | | | | | | | | | Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kprobe handler: discard user space trapbibo,mao2006-03-265-13/+18
| | | | | | | | | | | | | | Currently kprobe handler traps only happen in kernel space, so function kprobe_exceptions_notify should skip traps which happen in user space. This patch modifies this, and it is based on 2.6.16-rc4. Signed-off-by: bibo mao <bibo.mao@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: <hiramatu@sdl.hitachi.co.jp> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kretprobe instance recycled by parent processbibo mao2006-03-266-32/+14
| | | | | | | | | | | | | | | | | When kretprobe probes the schedule() function, if the probed process exits then schedule() will never return, so some kretprobe instances will never be recycled. In this patch the parent process will recycle retprobe instances of the probed function and there will be no memory leak of kretprobe instances. Signed-off-by: bibo mao <bibo.mao@intel.com> Cc: Masami Hiramatsu <hiramatu@sdl.hitachi.co.jp> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kretprobe: kretprobe-boosterMasami Hiramatsu2006-03-261-22/+39
| | | | | | | | | | | | | | | | | | | | | | In normal operation, kretprobe makes a target function return to trampoline code. A kprobe (called trampoline_probe) has been inserted in the trampoline code. When the kernel hits this kprobe, it calls kretprobe's handler and it returns to the original return address. Kretprobe-booster removes the trampoline_probe. It allows the trampoline code to call kretprobe's handler directly instead of invoking kprobe. The trampoline code returns to the original return address. (changelog from Chuck Ebbert <76306.1226@compuserve.com> - thanks ;)) Signed-off-by: Masami Hiramatsu <hiramatu@sdl.hitachi.co.jp> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86: kprobes-boosterMasami Hiramatsu2006-03-262-2/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current kprobe copies the original instruction at the probe point and replaces it with a breakpoint instruction (int3). When the kernel hits the probe point, kprobe handler is invoked. And the copied instruction is single-step executed on the copied buffer (not on the original address) by kprobe. After that, the kprobe checks registers and modify it (if need) as if the instructions was executed on the original address. My proposal is based on the fact there are many instructions which do NOT require the register modification after the single-step execution. When the copied instruction is a kind of them, kprobe just jumps back to the next instruction after single-step execution. If so, why don't we execute those instructions directly? With kprobe-booster patch, kprobes will execute a copied instruction directly and (if need) jump back to original code. This direct execution is executed when the kprobe don't have both post_handler and break_handler, and the copied instruction can be executed directly. I sorted instructions which can be executed directly or not; - Call instructions are NG(can not be executed directly). We should correct the return address pushed into top of stack. - Indirect instructions except for absolute indirect-jumps are NG. Those instructions changes EIP randomly. We should check EIP and correct it. - Instructions that change EIP beyond the range of the instruction buffer are NG. - Instructions that change EIP to tail 5 bytes of the instruction buffer (it is the size of a jump instruction). We must write a jump instruction which backs to original kernel code in the instruction buffer. - Break point instruction is NG. We should not touch EIP and pass to other handlers. - Absolute direct/indirect jumps are OK.- Conditional Jumps are NG. - Halt and software-interruptions are NG. Because it will stay on the instruction buffer of kprobes. - Prefixes are NG. - Unknown/reserved opcode is NG. - Other 1 byte instructions are OK. But those instructions need a jump back code. - 2 bytes instructions are mapped sparsely. So, in this release, this patch don't boost those instructions. >From Intel's IA-32 opcode map described in IA-32 Intel Architecture Software Developer's Manual Vol.2 B, I determined that following opcodes are not boostable. - 0FH (2byte escape) - 70H - 7FH (Jump on condition) - 9AH (Call) and 9CH (Pushf) - C0H-C1H (Grp 2: includes reserved opcode) - C6H-C7H (Grp11: includes reserved opcode) - CCH-CEH (Software-interrupt) - D0H-D3H (Grp2: includes reserved opcode) - D6H (Reserved) - D8H-DFH (Coprocessor) - E0H-E3H (loop/conditional jump) - E8H (Call) - F0H-F3H (Prefixes and reserved) - F4H (Halt) - F6H-F7H (Grp3: includes reserved opcode) - FEH-FFH(Grp4,5: includes reserved opcode) Kprobe-booster checks whether target instruction can be boosted (can be executed directly) at arch_copy_kprobe() function. If the target instruction can be boosted, it clears "boostable" flag. If not, it sets "boostable" flag -1. This is disabled status. In resume_execution() function, If "boostable" flag is cleared, kprobe-booster measures the size of the target instruction and sets "boostable" flag 1. In kprobe_handler(), kprobe checks the "boostable" flag. If the flag is 1, it resets current kprobe and executes instruction buffer directly instead of single stepping. When unregistering a boosted kprobe, it calls synchronize_sched() after "int3" is removed. So we can ensure followings after the synchronize_sched() called. - interrupt handlers are finished on all CPUs. - instruction buffer is not executed on all CPUs. And we can release the boosted kprobe safely. And also, on preemptible kernel, the booster is not enabled where the kernel preemption is enabled. So, there are no preempted threads on the instruction buffer. The description of kretprobe-booster: ==================================== In the normal operation, kretprobe make a target function return to trampoline code. And a kprobe (called trampoline_probe) have been inserted at the trampoline code. When the kernel hits this kprobe, it calls kretprobe's handler and it returns to original return address. Kretprobe-booster patch removes the trampoline_probe. It allows the trampoline code to call kretprobe's handler directly instead of invoking kprobe. And tranpoline code returns to original return address. This new trampoline code stores and restores registers, so the kretprobe handler is still able to access those registers. Current kprobe has about 1.3 usec/probe(*) overhead, and kprobe-booster patch reduces it to 0.6 usec/probe(*). Also current kretprobe has about 2.0 usec/probe(*) overhead. Kprobe-booster patch reduces it to 1.3 usec/probe(*), and the combination of both kprobe-booster patch and kretprobe-booster patch reduces it to 0.9 usec/probe(*). I expect the combination of both patches can reduce half of a probing overhead. Performance numbers strongly depend on the processor model. Andrew Morton wrote: > These preempt tricks look rather nasty. Can you please describe what the > problem is, precisely? And how this code avoids it? Perhaps we can find > something cleaner. The problem is how to remove the copied instructions of the kprobe *safely* on the preemptable kernel (CONFIG_PREEMPT=y). Kprobes basically executes the following actions; (1)int3 (2)preempt_disable() (3)kprobe_prehandler() (4)copied instructioin(single step) (5)kprobe_posthandler() (6)preempt_enable() (7)return to the original code During the execution of copied instruction, preemption is disabled (from step (2) to (6)). When unregistering the probes, Kprobe waits for RCU quiescent state by using synchronize_sched() after removing int3 instruction. Thus we can ensure the copied instruction is not executed. On the other hand, kprobe-booster executes the following actions; (1)int3 (2)preempt_disable() (3)kprobe_prehandler() (4)preempt_enable() <-- this one is added by my patch (5)copied instruction(direct execution) (6)jmp back to the original code The problem is that we have no way to prevent preemption on step (5) or (6). We cannot call preempt_disable() after step (6), because there are no rooms to do that. Thus, some other processes may be preempted at step(5) or (6) on preemptable kernel. And I couldn't find the easy way to ensure that other processes' stack do *not* have the address of them. (I thought some way to do that, but those are very costly.) So currently, I simply boost the kprobe only when the probe point is already preemption disabled. > Also, the patch adds a preempt_enable() but I don't see a corresponding > preempt_disable(). Am I missing something? It is corresponding to the preempt_disable() in the top of kprobe_handler(). I copied the code of kprobe_handler() here: static int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; kprobe_opcode_t *addr = NULL; unsigned long *lp; struct kprobe_ctlblk *kcb; /* * We don't want to be preempted for the entire * duration of kprobe processing */ preempt_disable(); <-- HERE kcb = get_kprobe_ctlblk(); Signed-off-by: Masami Hiramatsu <hiramatu@sdl.hitachi.co.jp> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kprobes: clean up resume_execute()Masami Hiramatsu2006-03-261-16/+10
| | | | | | | | | | | | Clean up kprobe's resume_execute() for i386 arch. Signed-off-by: Masami Hiramatsu <hiramatu@sdl.hitachi.co.jp> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hrtimers: remove data fieldRoman Zippel2006-03-268-27/+22
| | | | | | | | | | | | The nanosleep cleanup allows to remove the data field of hrtimer. The callback function can use container_of() to get it's own data. Since the hrtimer structure is anyway embedded in other structures, this adds no overhead. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hrtimers: remove nsec_t typedefRoman Zippel2006-03-263-16/+10
| | | | | | | | | | | | nsec_t predates ktime_t and has mostly been superseded by it. In the few places that are left it's better to make it explicit that we're dealing with 64 bit values here. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hrtimers: remove DEFINE_KTIME and ktime_to_clock_t()Roman Zippel2006-03-261-20/+0
| | | | | | | | | | | | Now that it_real_value is gone, the last user of DEFINE_KTIME and ktime_to_clock_t are also gone, so remove it before someone starts using it again. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hrtimers: remove it_real_value calculation from proc/*/statRoman Zippel2006-03-261-4/+1
| | | | | | | | | | | | Remove the it_real_value from /proc/*/stat, during 1.2.x was the last time it returned useful data (as it was directly maintained by the scheduler), now it's only a waste of time to calculate it. Return 0 instead. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hrtimers: remove state fieldRoman Zippel2006-03-262-18/+7
| | | | | | | | | | | Remove the state field and encode this information in the rb_node similiar to normal timer. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hrtimers: simplify nanosleepRoman Zippel2006-03-262-83/+63
| | | | | | | | | | | | nanosleep is the only user of the expired state, so let it manage this itself, which makes the hrtimer code a bit simpler. The remaining time is also only calculated if requested. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hrtimers: posix-timer: cleanup common_timer_get()Roman Zippel2006-03-261-24/+26
| | | | | | | | | Cleanup common_timer_get() a little. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hrtimers: pass current time to hrtimer_forward()Roman Zippel2006-03-264-10/+17
| | | | | | | | | | | Pass current time to hrtimer_forward(). This allows to use the softirq time in the timer base when the forward function is called from the timer callback. Other places pass current time with a call to timer->base->get_time(). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hrtimers: optimize softirq runqueuesThomas Gleixner2006-03-262-10/+38
| | | | | | | | | | | | | | The hrtimer softirq is called from the timer softirq every tick. Retrieve the current time from xtime and wall_to_monotonic instead of calling base->get_time() for each timer base. Store the time in the base structure and provide a hook once clock source abstractions are in place and to keep the code open for new base clocks. Based on a patch from: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3: "nobh" writeback support for filesystems blocksize < pagesizeBadari Pulavarty2006-03-261-6/+0
| | | | | | | | | | | | There is no valid reason why we can't support "nobh" option for filesystems with blocksize != PAGESIZE. This patch lets them use "nobh" option for writeback mode for blocksize < pagesize. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3: multi-block get_block()Badari Pulavarty2006-03-261-12/+4
| | | | | | | | | | | | | Mingming Cao recently added multi-block allocation support for ext3, currently used only by DIO. I added support to map multiple blocks for mpage_readpages(). This patch add support for ext3_get_block() to deal with multi-block mapping. Basically it renames ext3_direct_io_get_blocks() as ext3_get_block(). Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3: cleanups and WARN_ON()Andrew Morton2006-03-261-125/+114
| | | | | | | | | | | | | - Clean up a few little layout things and comments. - Add a WARN_ON to a case which I was wondering about. - Tune up some inlines. Cc: Mingming Cao <cmm@us.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] remove ->get_blocks() supportBadari Pulavarty2006-03-2612-78/+34
| | | | | | | | | | Now that get_block() can handle mapping multiple disk blocks, no need to have ->get_blocks(). This patch removes fs specific ->get_blocks() added for DIO and makes it users use get_block() instead. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] map multiple blocks for mpage_readpages()Badari Pulavarty2006-03-263-22/+90
| | | | | | | | | | | | | | | | | | This patch changes mpage_readpages() and get_block() to get the disk mapping information for multiple blocks at the same time. b_size represents the amount of disk mapping that needs to mapped. On the successful get_block() b_size indicates the amount of disk mapping thats actually mapped. Only the filesystems who care to use this information and provide multiple disk blocks at a time can choose to do so. No changes are needed for the filesystems who wants to ignore this. [akpm@osdl.org: cleanups] Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] pass b_size to ->get_block()Badari Pulavarty2006-03-263-1/+11
| | | | | | | | | | | Pass amount of disk needs to be mapped to get_block(). This way one can modify the fs ->get_block() functions to map multiple blocks at the same time. [akpm@osdl.org: performance tweak] [akpm@osdl.org: remove unneeded assignments] Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] change buffer_head.b_size to size_tBadari Pulavarty2006-03-264-12/+17
| | | | | | | | | | | | | | Increase the size of the buffer_head b_size field (only) for 64 bit platforms. Update some old and moldy comments in and around the structure as well. The b_size increase allows us to perform larger mappings and allocations for large I/O requests from userspace, which tie in with other changes allowing the get_block_t() interface to map multiple blocks at once. Signed-off-by: Nathan Scott <nathans@sgi.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3_get_blocks: Adjust reservation window size for mblocksMingming Cao2006-03-261-1/+31
| | | | | | | | | | | | | | | | | Optimize the block reservation and the multiple block allocation: with the knowledge of the total number of blocks ahead, set or adjust the reservation window size properly (based on the number of blocks needed) before block allocation happens: if there isn't any reservation yet, make sure the reservation window equals to or greater than the number of blocks needed, before create an reservation window; if a reservation window is already exists, try to extends the window size to match the number of blocks to allocate. This could increase the possibility of completing multiple blocks allocation in a single request, as blocks are only allocated in the range of the inode's reservation window. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3_get_blocks: Adjust accounting info in ext3_new_blocks()Mingming Cao2006-03-261-12/+19
| | | | | | | | | Update accounting information (quota, boundary checks, free blocks number etc) in ext3_new_blocks(). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3_get_blocks: support multiple blocks allocation in ext3_new_block()Mingming Cao2006-03-262-11/+40
| | | | | | | | | | | | Change ext3_try_to_allocate() (called via ext3_new_blocks()) to try to allocate the requested number of blocks on a best effort basis: After allocated the first block, it will always attempt to allocate the next few(up to the requested size and not beyond the reservation window) adjacent blocks at the same time. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3_get_blocks: multiple block allocationMingming Cao2006-03-261-77/+193
| | | | | | | | | | | | | | Add support for multiple block allocation in ext3-get-blocks(). Look up the disk block mapping and count the total number of blocks to allocate, then pass it to ext3_new_block(), where the real block allocation is performed. Once multiple blocks are allocated, prepare the branch with those just allocated blocks info and finally splice the whole branch into the block mapping tree. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3_get_blocks: Mapping multiple blocks at a onceMingming Cao2006-03-263-34/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently ext3_get_block() only maps or allocates one block at a time. This is quite inefficient for sequential IO workload. I have posted a early implements a simply multiple block map and allocation with current ext3. The basic idea is allocating the 1st block in the existing way, and attempting to allocate the next adjacent blocks on a best effort basis. More description about the implementation could be found here: http://marc.theaimsgroup.com/?l=ext2-devel&m=112162230003522&w=2 The following the latest version of the patch: break the original patch into 5 patches, re-worked some logicals, and fixed some bugs. The break ups are: [patch 1] Adding map multiple blocks at a time in ext3_get_blocks() [patch 2] Extend ext3_get_blocks() to support multiple block allocation [patch 3] Implement multiple block allocation in ext3-try-to-allocate (called via ext3_new_block()). [patch 4] Proper accounting updates in ext3_new_blocks() [patch 5] Adjust reservation window size properly (by the given number of blocks to allocate) before block allocation to increase the possibility of allocating multiple blocks in a single call. Tests done so far includes fsx,tiobench and dbench. The following numbers collected from Direct IO tests (1G file creation/read) shows the system time have been greatly reduced (more than 50% on my 8 cpu system) with the patches. 1G file DIO write: 2.6.15 2.6.15+patches real 0m31.275s 0m31.161s user 0m0.000s 0m0.000s sys 0m3.384s 0m0.564s 1G file DIO read: 2.6.15 2.6.15+patches real 0m30.733s 0m30.624s user 0m0.000s 0m0.004s sys 0m0.748s 0m0.380s Some previous test we did on buffered IO with using multiple blocks allocation and delayed allocation shows noticeable improvement on throughput and system time. This patch: Add support of mapping multiple blocks in one call. This is useful for DIO reads and re-writes (where blocks are already allocated), also is in line with Christoph's proposal of using getblocks() in mpage_readpage() or mpage_readpages(). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 2TB files: change type of kstatfs entriesTakashi Sato2006-03-261-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | This fix was proposed by Trond Myklebust. He says: The type "sector_t" is heavily tied in to the block layer interface as an offset/handle to a block, and is subject to a supposedly block-specific configuration option: CONFIG_LBD. Despite this, it is used in struct kstatfs to save a couple of bytes on the stack whenever we call the filesystems' ->statfs(). So kstatfs's entries related to blocks are invalid on statfs64 for a network filesystem which has more than 2^32-1 blocks when CONFIG_LBD is disabled. - struct kstatfs Change the type of following entries from sector_t to u64. f_blocks f_bfree f_bavail f_files f_ffree Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 2tb-files-add-blkcnt_t-fixesAndrew Morton2006-03-264-12/+15
| | | | | | Cc: Takashi Sato <sho@tnes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 2TB files: add blkcnt_tTakashi Sato2006-03-269-1/+42
| | | | | | | | | | | | | | | | | | | Add blkcnt_t as the type of inode.i_blocks. This enables you to make the size of blkcnt_t either 4 bytes or 8 bytes on 32 bits architecture with CONFIG_LSF. - CONFIG_LSF Add new configuration parameter. - blkcnt_t On h8300, i386, mips, powerpc, s390 and sh that define sector_t, blkcnt_t is defined as u64 if CONFIG_LSF is enabled; otherwise it is defined as unsigned long. On other architectures, it is defined as unsigned long. - inode.i_blocks Change the type from sector_t to blkcnt_t. Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 2TB files: st_blocks is invalid when calling stat64Takashi Sato2006-03-265-13/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch series fixes the following problems on 32 bits architecture. o stat64 returns the lower 32 bits of blocks, although userland st_blocks has 64 bits, because i_blocks has only 32 bits. The ioctl with FIOQSIZE has the same problem. o As Dave Kleikamp said, making >2TB file on JFS results in writing an invalid block number to disk inode. The cause is the same as above too. o In generic quota code dquot_transfer(), the file usage is calculated from i_blocks via inode_get_bytes(). If the file is over 2TB, the change of usage is less than expected. The cause is the same as above too. o As Trond Myklebust said, statfs64's entries related to blocks are invalid on statfs64 for a network filesystem which has more than 2^32-1 blocks with CONFIG_LBD disabled. [PATCH 3/3] We made patches to fix problems that occur when handling a large filesystem and a large file. It was discussed on the mails titled "stat64 for over 2TB file returned invalid st_blocks". Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mempool: use mempool_create_slab_pool()Matthew Dobson2006-03-2619-72/+39
| | | | | | | | | | Modify well over a dozen mempool users to call mempool_create_slab_pool() rather than calling mempool_create() with extra arguments, saving about 30 lines of code and increasing readability. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mempool: add mempool_create_slab_pool()Matthew Dobson2006-03-261-0/+8
| | | | | | | | | Create a simple wrapper function for the common case of creating a slab-based mempool. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mempool: use common mempool kzalloc allocatorMatthew Dobson2006-03-261-15/+2
| | | | | | | | | | This patch changes a mempool user, which is basically just a wrapper around kzalloc(), to use the common mempool_kmalloc/kfree, rather than its own wrapper function, removing duplicated code. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud