summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kill do_generic_mapping_readChristoph Hellwig2008-02-082-28/+5
| | | | | | | | | | | | do_generic_mapping_read was used by gfs2 for internals reads, but this use of the interface was rather suboptimal (as was the whole interface) and has been replaced by an internal helper now. This patch kills do_generic_mapping_read and surrounding damage in preparation of additional cleanups for the buffered read path. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Remove __STRICT_ANSI__ from linux/types.hMike Frysinger2008-02-081-3/+3
| | | | | | | | | All of the asm-*/types.h headers have been updated to no longer check __STRICT_ANSI__ for the 64bit types, so this brings linux/types.h in line. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* BKL-Removal: convert pipe to use unlocked_ioctl tooAndi Kleen2008-02-081-9/+7
| | | | | | | | | No BKL needed in pipe_ioctl Signed-off-by: Andi Kleen <ak@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PWM LED driverDavid Brownell2008-02-083-0/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | This is a LED driver using the PWM on newer SOCs from Atmel; brightness is controlled by changing the PWM duty cycle. So for example if you've set up two leds labeled "pwm0" and "pwm1": echo 0 > /sys/class/leds/pwm2/brightness # off (0%) echo 80 > /sys/class/leds/pwm2/brightness echo 255 > /sys/class/leds/pwm2/brightness # on (100%) Note that "brightness" here isn't linear; maybe that should change. Going from 4 to 8 probably doubles perceived brightness, while 244 to 248 is imperceptible. This is mostly intended to be a simple example of PWM, although it's realistic since LCD backlights are often driven with PWM to conserve battery power (and offer brightness options). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Basic PWM driver for AVR32 and AT91David Brownell2008-02-086-0/+546
| | | | | | | | | | | | | | | PWM device setup, and a simple PWM driver exposing a programming interface giving access to each channel's full capabilities. Note that this doesn't support starting several channels in synch. [hskinnemoen@atmel.com: allocate platform device dynamically] [hskinnemoen@atmel.com: Kconfig fix] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* OSS: constify function pointer tablesJan Engelhardt2008-02-082-4/+4
| | | | | | Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* procfs: constify function pointer tablesJan Engelhardt2008-02-0819-34/+34
| | | | | | | | | | | | Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-By: David Howells <dhowells@redhat.com> Acked-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* reiserfs: constify function pointer tablesJan Engelhardt2008-02-081-1/+1
| | | | | | | Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Acked-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* isofs: implement dmode optionJan Kara2008-02-083-9/+18
| | | | | | | | | | Implement dmode option for iso9660 filesystem to allow setting of access rights for directories on the filesystem. Signed-off-by: Jan Kara <jack@suse.cz> Cc: "Ilya N. Golubev" <gin@mo.msk.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* workqueue: make delayed_work_timer_fn() staticLi Zefan2008-02-082-3/+1
| | | | | | | | delayed_work_timer_fn() is a timer function, make it static. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_serial: show tty name in /proc/interruptsHaavard Skinnemoen2008-02-081-1/+2
| | | | | | | | | | | When possible, pass the tty name to request_irq() so that the user can easily distinguish the different serial ports in /proc/interrupts. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_serial: use container_of instead of direct castHaavard Skinnemoen2008-02-081-17/+23
| | | | | | | | | | | As pointed out by David Brownell, we really ought to be using container_of when converting from "struct uart_port *" to "struct atmel_uart_port *". Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_serial: fix broken RX buffer allocationHaavard Skinnemoen2008-02-081-1/+2
| | | | | | | | | | Introduced by atmel_serial-split-the-interrupt-handler.patch. Thanks to michael <trimarchi@gandalf.sssup.it> for spotting it. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_serial: add DMA supportChip Coldwell2008-02-082-24/+383
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is based on the DMA-patch by Chip Coldwell for the AT91/AT32 serial USARTS, with some tweaks to make it apply neatly on top of the other patches in this series. The RX and TX code has been moved to a tasklet and reworked a bit. Instead of depending on the ENDRX and TIMEOUT bits in CSR, we simply grab as much data as we can from the DMA buffers. I think this closes a race where the ENDRX bit is set after we read CSR but before we read RPR, although I haven't confirmed this. Similarly, the two TX handlers (ENDTX and TXBUFE) have been combined into one. Since the current code only uses a single TX buffer, there's no point in handling those interrupts separately. This also fixes a DMA sync bug in the original patch. [linux@bohmer.net: rebased onto irq-splitup patch] [hskinnemoen@atmel.com: moved to tasklet, fixed dma bug, misc cleanups] [hskinnemoen@atmel.com: atmel_serial dma: Misc fixes and cleanups] Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_serial: split the interrupt handlerRemy Bohmer2008-02-081-55/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | Split up the interrupt handler of the serial port into a interrupt top-half and a tasklet. The goal is to get the interrupt top-half as short as possible to minimize latencies on interrupts. But the old code also does some calls in the interrupt handler that are not allowed on preempt-RT in IRQF_NODELAY context. This handler is executed in this context because of the interrupt sharing with the timer interrupt. The timer interrupt on Preempt-RT runs in IRQF_NODELAY context. The tasklet takes care of handling control status changes, pushing incoming characters to the tty layer, handling break and other errors. It also handles pushing TX data into the data register. Reading the complete receive queue is still done in the top-half because we never want to miss any incoming character. [hskinnemoen@atmel.com: misc cleanups and simplifications] Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_serial: fix bugs in probe() error path and remove()Haavard Skinnemoen2008-02-081-10/+29
| | | | | | | | | | | | | | When an error happens in probe(), the clocks should be disabled, but only if the port isn't already used as a console. In remove(), the port struct shouldn't be freed because it's defined statically. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_serial: use existing console options only if BRG is runningHaavard Skinnemoen2008-02-081-8/+7
| | | | | | | | | | | If BRGR is zero, the baud rate generator isn't running, so the boot loader can't have initialized the port. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_serial: use cpu_relax() when busy-waitingHaavard Skinnemoen2008-02-081-2/+2
| | | | | | | | | | | | Replace two instances of barrier() with cpu_relax() since that's the right thing to do when busy-waiting. This does not actually change anything since cpu_relax() is defined as barrier() on both ARM and AVR32. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_serial: clean up the codeRemy Bohmer2008-02-081-105/+150
| | | | | | | | | | | | Clean up the atmel_serial driver to conform the coding rules. It contains no functional change. Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* MAINTAINERS: add Haavard as maintainer of the atmel_serial driverHaavard Skinnemoen2008-02-081-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patchset cleans up the atmel_serial driver a bit, moves a significant portion of the interrupt handler into a tasklet, and adds DMA support. This is the result of a combined effort by Chip Coldwell, Remy Bohmer and me. The patches should apply cleanly onto Linus' latest git tree, and I've also tested it on -mm (with a couple of avr32 fixes applied to make the rest of the tree compile.) With DMA, I see transfer rates around 92 kbps when transferring a big file using ZModem (both directions are roughly the same.) I've also tested the same thing with a bunch of debug options enabled. The transfer rate is slightly lower, but no errors are reported. Note that break and error handling doesn't work too well with DMA enabled. This is a common problem with all the efforts I've seen adding DMA support to this driver (including my own). The PDC error handling also accesses icount without locking. I'm tempted to just ignore the problem for now and hopefully come up with a solution later. This patch: The atmel_serial driver never had a MAINTAINERS entry, although Andrew Victor has effectively been acting as a maintainer since he got the driver merged into mainline in the first place. I'll keep Cc'ing Andrew on all patches, but I'm going to take the main responsibility for getting things moving upstream from now on. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* SMBIOS/DMI: add type 41 = Onboard Devices Extended InformationWim Van Sebroeck2008-02-082-1/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From version 2.6 of the SMBIOS standard, type 10 (On Board Devices Information) becomes obsolete. The reason for this is that no further fields can be added to this structure without adversely affecting existing software's ability to properly parse the data. Therefore type 41 (Onboard Devices Extended Information) was added. The structure is as follows: struct smbios_type_41 { u8 type; u8 length; u16 handle; u8 reference_designation_string; u8 device_type; /* same device type as in type 10 */ u8 device_type_instance; u16 segment_group_number; u8 bus_number; u8 device_function_number; }; For more info: http://www.dmtf.org/standards/smbios Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* parport: fix ieee1284_epp_read_addrStephan Boettcher2008-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We bought cheap notebooks to control our custom data acquisition system, which requires EPP mode (read/write, data/addr). The bios does not offer EPP mode, and indeed hardware EPP mode appears not to work, although the parport driver tries to use it. EPPSWE mode does work for data r/w and addr write, but addr read requires this patch. (stephan)rshgse3: lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 12) 05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) 08:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) 08:03.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) 08:03.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) (stephan)rshgse3: grep . /proc/sys/dev/parport/parport0/* /proc/sys/dev/parport/parport0/base-addr:888 1912 /proc/sys/dev/parport/parport0/dma:-1 /proc/sys/dev/parport/parport0/irq:7 /proc/sys/dev/parport/parport0/modes:PCSPP,TRISTATE,EPP /proc/sys/dev/parport/parport0/spintime:500 Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* The scheduled 'time' option removalAdrian Bunk2008-02-083-24/+0
| | | | | | | | | The scheduled removal of the 'time' option. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* remove the unused exports of sys_open/sys_readArjan van de Ven2008-02-082-2/+0
| | | | | | | | | | | These exports (which aren't used and which are in fact dangerous to use because they pretty much form a security hole to use) have been marked _UNUSED since 2.6.24 with removal in 2.6.25. This patch is their final departure from the Linux kernel tree. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* update checkpatch.pl to version 0.13Andy Whitcroft2008-02-081-96/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This version brings a large number of fixes which have built up over the Christmas period. Mostly these are fixes for false positives, both through improvments to unary checks and possible type detection. It also brings new checks for while location and CVS keywords. Of note: - a number of fixes to unary detection - detection of a number of new forms of types to improve type matching - better inline handling - recognision of '%' as an operator Andy Whitcroft (28): Version: 0.13 unary detection: maintain bracket state across lines move to pre-sanitising the entire file the text of a #error statement should be treated like it is in quotes line sanitisation needs to target double backslash correctly tighten comment guestimation for lines starting ' * ' debug: add a debug framework prevent unclosed single quotes from spreading add % as an operator the text of a #warning statement should be treated like it is in quotes possible matching applies in typedefs single statement block checks must not trigger when two or more statements possible types: local variables may also be const treat inline as a type attribute to even when out of place possible types: sparse annotations are valid indicators possible types: beef up the possible type testing check for hanging while statements on the wrong line utf8 checks need to occur against the raw lines function brace checks should use any whitespece matches comments should take up space in the line when sanitised remove debugging from if assignment checks possible types -- ensure we detect all pointer casts fix tests for function spacing in the presence of #define clean up the UTF-8 error message to be clearer test-lib: invert the status report, output success counts detect and report CVS keywords tests: break out tests Add $Id$ to the CVS keyword checks Benny Halevy (1): checkpatch.pl: recognize the #elif preprocessor directive Geert Uytterhoeven (1): print the filenames of patches where available Mauro Carvalho Chehab (1): Fix missing \n in checkpatch.pl Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fs/afs/security.c: fix uninitialized var warningAndrew Morton2008-02-081-1/+1
| | | | | | | | | fs/afs/security.c: In function 'afs_permission': fs/afs/security.c:290: warning: 'access' may be used uninitialized in this function Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fs/hfsplus/unicode.c: fix uninitialized var warningAndrew Morton2008-02-081-1/+2
| | | | | | | | | fs/hfsplus/unicode.c: In function 'hfsplus_hash_dentry': fs/hfsplus/unicode.c:328: warning: 'dsize' may be used uninitialized in this function Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: change maintainerJan Kara2008-02-081-2/+2
| | | | | | | | | | | I've tried to contact Ben Fennema a few times but without success. Since I'm currently probably closest to being an UDF maintainer, I guess it's fine to also change the entry in MAINTAINERS. Signed-off-by: Jan Kara <jack@suse.cz> Cc: <bfennema@falcon.csc.calpoly.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: fix adding entry to a directoryJan Kara2008-02-082-10/+11
| | | | | | | | | | | When adding directory entry to a directory, we have to properly increase length of the last extent. Handle this similarly as extending regular files - make extents always have size multiple of block size (it will be truncated down to proper size in udf_clear_inode()). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: cleanup directory offset handlingJan Kara2008-02-083-30/+24
| | | | | | | | | | | | Position in directory returned by readdir is offset of directory entry divided by four (don't ask me why). Make this conversion only when reading f_pos from userspace / writing it there and internally work in bytes. It makes things more easily readable and also fixes a bug (we forgot to divide length of the entry by 4 when advancing f_pos in udf_add_entry()). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: avoid unnecessary synchronous writesMike Galbraith2008-02-081-1/+1
| | | | | | | | | | Fix udf_clear_inode() to request asynchronous writeout in icache reclaim path. Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: fix signedness issueMarcin Slusarz2008-02-081-1/+1
| | | | | | | | | | | | | | | | sparse generated: fs/udf/namei.c:896:15: originally declared here fs/udf/namei.c:1147:41: warning: incorrect type in argument 3 (different signedness) fs/udf/namei.c:1147:41: expected int *offset fs/udf/namei.c:1147:41: got unsigned int *<noident> fs/udf/namei.c:1152:78: warning: incorrect type in argument 3 (different signedness) fs/udf/namei.c:1152:78: expected int *offset fs/udf/namei.c:1152:78: got unsigned int *<noident> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: fix 3 signedness & 1 unitialized variable warningsMarcin Slusarz2008-02-083-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sparse generated: fs/udf/inode.c:324:41: warning: incorrect type in argument 4 (different signedness) fs/udf/inode.c:324:41: expected long *<noident> fs/udf/inode.c:324:41: got unsigned long *<noident> inode_getblk always set 4th argument to uint32_t value 3rd parameter of map_bh is sector_t (which is unsigned long or u64) so convert phys value to sector_t fs/udf/inode.c:1818:47: warning: incorrect type in argument 3 (different signedness) fs/udf/inode.c:1818:47: expected int *<noident> fs/udf/inode.c:1818:47: got unsigned int *<noident> fs/udf/inode.c:1826:46: warning: incorrect type in argument 3 (different signedness) fs/udf/inode.c:1826:46: expected int *<noident> fs/udf/inode.c:1826:46: got unsigned int *<noident> udf_get_filelongad and udf_get_shortad are called always for uint32_t values (struct extent_position->offset), so it's safe to convert offset parameter to uint32_t gcc warned: fs/udf/inode.c: In function 'udf_get_block': fs/udf/inode.c:299: warning: 'phys' may be used uninitialized in this function initialize it to 0 (if someday someone will break inode_getblk we will catch it immediately) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: remove wrong prototype of udf_readdirMarcin Slusarz2008-02-081-62/+56
| | | | | | | | | | | | sparse generated: fs/udf/dir.c:78:5: warning: symbol 'udf_readdir' was not declared. Should it be static? there are 2 different prototypes of udf_readdir - remove them and move code around to make it still compile Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kill UDFFS_{DATE,VERSION}Adrian Bunk2008-02-082-5/+1
| | | | | | | | | | Printing date and version of a driver makes sense if there's a maintainer who's maintaining and using these, but printing ancient version information only confuses users. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: improve readability of udf_load_partitionMarcin Slusarz2008-02-081-29/+30
| | | | | | | | Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: fix udf_debug macroMarcin Slusarz2008-02-081-2/+2
| | | | | | | | | | | | | | | | | udf_debug should be enclosed with do { } while (0) to be safely used in code like below: if (something) udf_debug(); else anything; (Otherwise compiler will not compile it with: "error: expected expression before 'else'") Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: cache struct udf_inode_infoMarcin Slusarz2008-02-0811-290/+338
| | | | | | | | | | | cache UDF_I(struct inode *) return values when there are at least 2 uses in one function Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: remove UDF_I_* macros and open code themMarcin Slusarz2008-02-0814-314/+315
| | | | | | | | Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: convert byte order of constant instead of variableMarcin Slusarz2008-02-084-24/+24
| | | | | | | | | | | convert byte order of constant instead of variable, which can be done at compile time (vs run time) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: replace loops coded with goto to real loopsMarcin Slusarz2008-02-081-59/+59
| | | | | | | | Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: create common function for changing free space counterMarcin Slusarz2008-02-081-29/+20
| | | | | | | | Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: create common function for tag checksummingMarcin Slusarz2008-02-085-56/+22
| | | | | | | | Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: fix coding styleMarcin Slusarz2008-02-0814-830/+1306
| | | | | | | | | | | | | | | | | | | fix coding style errors found by checkpatch: - assignments in if conditions - braces {} around single statement blocks - no spaces after commas - printks without KERN_* - lines longer than 80 characters - spaces between "type *" and variable name before: 192 errors, 561 warnings, 8987 lines checked after: 1 errors, 38 warnings, 9468 lines checked Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: fix sparse warnings (shadowing & mismatch between declaration and ↵Marcin Slusarz2008-02-081-2/+1
| | | | | | | | | | | | | | | | definition) fix sparse warnings: fs/udf/super.c:1431:24: warning: symbol 'bh' shadows an earlier one fs/udf/super.c:1347:21: originally declared here fs/udf/super.c:472:6: warning: symbol 'udf_write_super' was not declared. Should it be static? Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Cc: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: move calculating of nr_groups into helper functionMarcin Slusarz2008-02-083-9/+13
| | | | | | | | | Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: convert macros related to bitmaps to functionsMarcin Slusarz2008-02-082-44/+55
| | | | | | | | | | | | convert UDF_SB_ALLOC_BITMAP macro to udf_sb_alloc_bitmap function convert UDF_SB_FREE_BITMAP macro to udf_sb_free_bitmap function Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: check if udf_load_logicalvol failedMarcin Slusarz2008-02-081-1/+4
| | | | | | | | | | | | udf_load_logicalvol may fail eg in out of memory conditions - check it and propagate error further Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: convert UDF_SB_ALLOC_PARTMAPS macro to udf_sb_alloc_partition_maps functionMarcin Slusarz2008-02-082-15/+23
| | | | | | | | | | | | | - convert UDF_SB_ALLOC_PARTMAPS macro to udf_sb_alloc_partition_maps function - convert kmalloc + memset to kcalloc - check if kcalloc failed (partially) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Cc: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* udf: remove some ugly macrosMarcin Slusarz2008-02-0811-442/+509
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | remove macros: - UDF_SB_PARTMAPS - UDF_SB_PARTTYPE - UDF_SB_PARTROOT - UDF_SB_PARTLEN - UDF_SB_PARTVSN - UDF_SB_PARTNUM - UDF_SB_TYPESPAR - UDF_SB_TYPEVIRT - UDF_SB_PARTFUNC - UDF_SB_PARTFLAGS - UDF_SB_VOLIDENT - UDF_SB_NUMPARTS - UDF_SB_PARTITION - UDF_SB_SESSION - UDF_SB_ANCHOR - UDF_SB_LASTBLOCK - UDF_SB_LVIDBH - UDF_SB_LVID - UDF_SB_UMASK - UDF_SB_GID - UDF_SB_UID - UDF_SB_RECORDTIME - UDF_SB_SERIALNUM - UDF_SB_UDFREV - UDF_SB_FLAGS - UDF_SB_VAT - UDF_UPDATE_UDFREV - UDF_SB_FREE and open code them convert UDF_SB_LVIDIU macro to udf_sb_lvidiu function rename some struct udf_sb_info fields: - s_volident to s_volume_ident - s_lastblock to s_last_block - s_lvidbh to s_lvid_bh - s_recordtime to s_record_time - s_serialnum to s_serial_number; - s_vat to s_vat_inode; Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Cc: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud