summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: dwc: Staticise non-exported i2s_start()Mark Brown2012-07-041-1/+2
| | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: SPEAr spdif_out: Add spdif out supportVipin Kumar2012-07-042-0/+468
| | | | | | | | | This patch implements the spdif out driver for ST peripheral. This peripheral implements IEC60958 standard Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: STA529: Add support for STA529 Audio CodecRajeev Kumar2012-07-043-0/+447
| | | | | | | | | | The STA529 is a digital stereo class-D audio amplifier. It includes an audio DSP, an ST proprietary high-efficiency class-D driver and CMOS power output stage. It is intended for high-efficiency digital-to-power-audio conversion for portable applications. Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: tlv320aic3x: extending registers cacheJiri Prchal2012-07-041-1/+3
| | | | | | | Adds missing register default values to cache. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: tlv320aic3x: add missing registers and bitsJiri Prchal2012-07-041-1/+18
| | | | | | | | Adds register and bit shift definitions in header file. Changes are for TLV320AIC310x based on data sheet. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8994: Don't suspend accessory detectionMark Brown2012-07-031-37/+0
| | | | | | | | Leave it up to the machine driver to disable accessory detection if desired, the common pattern is to have accessory detection be a wake source. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: core: Try to use regmap if the driver doesn't set up any I/OMark Brown2012-07-031-0/+4
| | | | | | | | | | Since most new drivers are expected to use regmap and since frequently the only thing we need to do in the CODEC probe function is configure the I/O try to initialise the register I/O using regmap if the driver hasn't done so after probe(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* ASoC: wm8962: Log AIF configuration requested by hw_params()Mark Brown2012-07-031-0/+3
| | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: tegra: use dmaengine based dma driverLaxman Dewangan2012-07-033-1/+119
| | | | | | | | | | | | | | | | | | | Use the dmaengine based Tegra APB DMA driver for data transfer between SPI fifo and memory in place of legacy Tegra APB DMA. Because generic soc-dmaengine-pcm uses the DMAs API based on dmaengine, using the exported APIs provided by this generic driver. The new driver is selected if legacy driver is not selected and new dma driver is enabled through config file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: dapm: Remove incomplete stereo codeBenoît Thébaudeau2012-07-031-10/+12
| | | | | | | | Stereo is not yet supported by dapm widgets, so remove stereo code from snd_soc_dapm_get_volsw(), and warn if stereo controls are detected. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: smdk_wm8994: Convert to use snd_soc_register_card()Sachin Kamat2012-07-031-13/+23
| | | | | | | | | Current method for machine driver to register with the ASoC core is to use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: dapm: Fix snd_soc_dapm_put_volsw() connectBenoît Thébaudeau2012-06-291-7/+1
| | | | | | | | | | | | snd_soc_dapm_put_volsw() sets connect incorrectly in the case max > 1 with invert. In that case, the raw disconnect value should be max, which corresponds to the userspace value 0. This use case currently does not appear upstream, but it could break SOC_DAPM_SINGLE() or SOC_DAPM_SINGLE_TLV() elsewhere or in the future. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: spdif: Build separate RX and TX objectsMark Brown2012-06-291-2/+3
| | | | | | | | Otherwise we fail to link when building as modules due to multiple init/exit functions. Reported-by: Fengguang Wu <wfg@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: spdif_receiver: Add support for spdif in Audio CodecVipin Kumar2012-06-282-1/+68
| | | | | | | | This patch adds the support for spdif in audio codec. Signed-off-by: vipin Kumar <vipin.kumar@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: dwc: Add missing __iomem annotationsMark Brown2012-06-281-2/+2
| | | | | | Otherwise sparse gets very upset with us. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm5102: Remove unused platform data headerMark Brown2012-06-271-1/+0
| | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: dwc: Bodge around continuing absence of clock API stubsMark Brown2012-06-251-0/+1
| | | | | | | | | The patches for stubbing out the generic clock API still haven't been applied so we need to either add ifdefs here or add a dependency until someone decides to actually apply them. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8996: Move register default configuration to I2C probeMark Brown2012-06-251-151/+180
| | | | | | | This gets the registers set up as early as possible, mainly useful for the GPIOs to ensure that they're in the correct mode. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8996: Inline wm8996_reset() and optimise cache-only usageMark Brown2012-06-251-18/+13
| | | | | | | | | | There is only one caller and this allows us to cleanly leave the CODEC with the internal LDO powered down which is the default state we're looking for and means that we can robustly disable the register cache only when we either disable the LDO or power down the external regulators. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8996: Move regulator notifier callbacks into I2C levelMark Brown2012-06-251-21/+20
| | | | | | Now that we're using regmap the cache is available here. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8904: Move register default setup into I2C probe()Mark Brown2012-06-251-56/+55
| | | | | | | Get it done as early as possible, it's neater and minimises the time the pins aren't configured as requested. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8904: Move regulator acquisition and device identification to I2CMark Brown2012-06-251-61/+51
| | | | | | It's more idiomatic to have the resource allocation at this level. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8904: Rely entirely on the core for bias level managementMark Brown2012-06-251-27/+3
| | | | | | | | | | Even though the WM8904 is able to use idle_bias_off during both probe and resume we were needlessly leaving the device in standby mode. Instead power the device down as soon as we've confirmed that we can talk to it and don't manage the bias level at all over suspend and resume, the core will take us down to our minimum power level. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge tag 'v3.5-rc4' into for-3.6Mark Brown2012-06-25626-3042/+6577
|\ | | | | | | Linux 3.5-rc4 contains some bug fixes which overlap with new features.
| * Linux 3.5-rc4v3.5-rc4Linus Torvalds2012-06-241-1/+1
| |
| * Fix typo in printed messagesAnatol Pomozov2012-06-243-3/+3
| | | | | | | | | | | | Coult -> Could Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2012-06-242-33/+67
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull KVM fixes from Avi Kivity: "Fixing a scheduling-while-atomic bug in the ppc code, and a bug which allowed pci bridges to be assigned to guests." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_page KVM: Fix PCI header check on device assignment
| | * KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_pagePaul Mackerras2012-06-191-30/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the moment we call kvmppc_pin_guest_page() in kvmppc_update_vpa() with two spinlocks held: the vcore lock and the vcpu->vpa_update_lock. This is not good, since kvmppc_pin_guest_page() calls down_read() and get_user_pages_fast(), both of which can sleep. This bug was introduced in 2e25aa5f ("KVM: PPC: Book3S HV: Make virtual processor area registration more robust"). This arranges to drop those spinlocks before calling kvmppc_pin_guest_page() and re-take them afterwards. Dropping the vcore lock in kvmppc_run_core() means we have to set the vcore_state field to VCORE_RUNNING before we drop the lock, so that other vcpus won't try to run this vcore. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
| | * KVM: Fix PCI header check on device assignmentJan Kiszka2012-06-151-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The masking was wrong (must have been 0x7f), and there is no need to re-read the value as pci_setup_device already does this for us. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43339 Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * | Merge tag 'rdma-fixes' of ↵Linus Torvalds2012-06-246-46/+55
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA fixes from Roland Dreier: - Fixes to new ocrdma driver - Typo in test in CMA * tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: QP type check on received REQs should be AND not OR RDMA/ocrdma: Fix off by one in ocrdma_query_gid() RDMA/ocrdma: Fixed RQ error CQE polling RDMA/ocrdma: Correct queue SGE calculation RDMA/ocrdma: Correct reported max queue sizes RDMA/ocrdma: Fixed GID table for vlan and events
| | * \ Merge branches 'cma' and 'ocrdma' into for-linusRoland Dreier2012-06-245-45/+54
| | |\ \
| | | * | RDMA/ocrdma: Fix off by one in ocrdma_query_gid()Dan Carpenter2012-06-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dev->sgid_tbl[] array is allocated in ocrdma_alloc_resources(). It has OCRDMA_MAX_SGID elements so the test here is off by one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | | * | RDMA/ocrdma: Fixed RQ error CQE pollingParav Pandit2012-06-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix RQ/SRQ error CQE polling. Return error CQE to consumer for error case which was not returned previously. Signed-off-by: Parav Pandit <parav.pandit@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | | * | RDMA/ocrdma: Correct queue SGE calculationMahesh Vardhamanaiah2012-06-114-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix max sge calculation for sq, rq, srq for all hardware types. Signed-off-by: Mahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | | * | RDMA/ocrdma: Correct reported max queue sizesMahesh Vardhamanaiah2012-06-112-11/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix code to read the max wqe and max rqe values from mailbox response. Signed-off-by: Mahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | | * | RDMA/ocrdma: Fixed GID table for vlan and eventsParav Pandit2012-06-111-29/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Fix reporting GID table addition events. 2. Enable vlan based GID entries only when VLAN is enabled at compile time (test CONFIG_VLAN_8021Q / CONFIG_VLAN_8021Q_MODULE). Signed-off-by: Parav Pandit <parav.pandit@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | * | | RDMA/cma: QP type check on received REQs should be AND not ORSean Hefty2012-06-191-1/+1
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change || check to the intended && when checking the QP type in a received connection request against the listening endpoint. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| * | | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2012-06-2423-42/+77
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Nothing very controversial in here. Most of the fixes are for OMAP this time around, with some orion/kirkwood and a tegra patch mixed in." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Orion: Fix Virtual/Physical mixup with watchdog ARM: Kirkwood: clk_register_gate_fn: add fn assignment ARM: Orion5x - Restore parts of io.h, with rework ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled ARM: OMAP2+: mux: fix sparse warning ARM: OMAP2+: CM: increase the module disable timeout ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks ARM: OMAP4: hwmod data: fix 32k sync timer idle modes ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby ARM: OMAP: Fix Beagleboard DVI reset gpio arm/dts: OMAP2: Fix interrupt controller binding ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0 ARM: OMAP2+: Fix MUSB ifdefs for platform init code ARM: tegra: make tegra_cpu_reset_handler_enable() __init ARM: OMAP: PM: Lock clocks list while generating summary ARM: iconnect: Remove include of removed linux/spi/orion_spi.h
| | * | | ARM: Orion: Fix Virtual/Physical mixup with watchdogAndrew Lunn2012-06-235-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The orion watchdog is expecting to be passed the physcial address of the hardware, and will ioremap() it to give a virtual address it will use as the base address for the hardware. However, when creating the platform resource record, a virtual address was being used. Add the necassary #define's so we can pass the physical address as expected. Tested on Kirkwood and Orion5x. Cc: stable <stable@vger.kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: Kirkwood: clk_register_gate_fn: add fn assignmentMarc Kleine-Budde2012-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit: 98d9986 ARM: Kirkwood: Replace clock gating the kirkwood clock gating has been reworked. A custom variant of clock gating, that calls a custom function before gating the clock off, has been introduced. However in clk_register_gate_fn() this custom function "fn" is never assigned. This patch adds the missing fn assignment. Cc: stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: Orion5x - Restore parts of io.h, with reworkAndrew Lunn2012-06-232-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4d5fc58dbe34b78157c05b319669bb3e064ba8bd (ARM: remove bunch of now unused mach/io.h files) removed the orion5x io.h. Unfortunately, this is still needed for the definition of IO_SPACE_LIMIT which overrides the default 64K. All Orion based systems have 1Mbyte of IO space per PCI[e] bus, and try to request_resource() this size. Orion5x has two such PCI buses. It is likely that the original, removed version, was broken. This version might be less broken. However, it has not been tested on hardware with a PCI card, let alone hardware with a PCI card with IO capabilities. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | Merge tag 'omap-fixes-a-for-3.5rc' of ↵Olof Johansson2012-06-237-5/+28
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes From Paul Walmsley (as per Tony Lindgren's request): "Some uncontroversial OMAP clock, hwmod, and compiler warning fixes for 3.5-rc" * tag 'omap-fixes-a-for-3.5rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled ARM: OMAP2+: mux: fix sparse warning ARM: OMAP2+: CM: increase the module disable timeout ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks ARM: OMAP4: hwmod data: fix 32k sync timer idle modes ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby ARM: OMAP: PM: Lock clocks list while generating summary
| | | * | | ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabledRicardo Neri2012-06-211-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per the OMAP4 documentation, audio over HDMI must be transmitted in no-idle mode. This patch adds the HWMOD_SWSUP_SIDLE so that omap_hwmod uses no-idle/force-idle settings instead of smart-idle mode. This is required as the DSS interface clock is used as functional clock for the HDMI wrapper audio FIFO. If no-idle mode is not used, audio could be choppy, have bad quality or not be audible at all. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> [b-cousson@ti.com: Update the subject and align the .flags location with the script template] Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | | * | | ARM: OMAP2+: mux: fix sparse warningPaul Walmsley2012-06-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bbd707acee279a61177a604822db92e8164d00db ("ARM: omap2: use machine specific hook for late init") resulted in the addition of this sparse warning: arch/arm/mach-omap2/mux.c:791:12: warning: symbol 'omap_mux_late_init' was not declared. Should it be static? Fix by including the header file containing the prototype. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Tony Lindgren <tony@atomide.com>
| | | * | | ARM: OMAP2+: CM: increase the module disable timeoutPaul Walmsley2012-06-212-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increase the timeout for disabling an IP block to five milliseconds. This is to handle the usb_host_fs idle latency, which takes almost four milliseconds after a host controller reset. This is the second of two patches needed to resolve the following boot warning: omap_hwmod: usb_host_fs: _wait_target_disable failed Thanks to Sergei Shtylyov <sshtylyov@mvista.com> for finding an unrelated hunk in a previous version of this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Tero Kristo <t-kristo@ti.com>
| | | * | | ARM: OMAP4: clock data: add clockdomains for clocks used as main clocksPaul Walmsley2012-06-211-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until the OMAP4 code is converted to disable the use of the clock framework-based clockdomain enable/disable sequence, any clock used as a hwmod main_clk must have a clockdomain associated with it. This patch populates some clock structure clockdomain names to resolve the following warnings during kernel init: omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck. omap_hwmod: trace_clk_div_ck: missing clockdomain for trace_clk_div_ck. omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck. omap_hwmod: ddrphy_ck: missing clockdomain for ddrphy_ck. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoît Cousson <b-cousson@ti.com>
| | | * | | ARM: OMAP4: hwmod data: fix 32k sync timer idle modesPaul Walmsley2012-06-211-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 32k sync timer IP block target idle modes in the hwmod data are incorrect. The IP block does not support any smart-idle modes. Update the data to reflect the correct modes. This problem was initially identified and a diff fragment posted to the lists by Benoît Cousson <b-cousson@ti.com>. A patch description bug in the first version was also identified by Benoît. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Tero Kristo <t-kristo@ti.com>
| | | * | | ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-StandbyDjamil Elaidi2012-06-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an IP is configured in Smart-Standby-Wakeup, when disabling wakeup feature the IP will not go back to Smart-Standby, but will remain in Smart-Standby-Wakeup. Signed-off-by: Djamil Elaidi <d-elaidi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | | * | | ARM: OMAP: PM: Lock clocks list while generating summaryTodd Poynor2012-06-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a53025724052b2b1edbc982a4a248784638f563d (OMAP: Add debugfs node to show the summary of all clocks) introduced clock summary, however, we are interested in seeing snapshot of the clock state, not in dynamically changing clock configurations as the data provided by clock summary will then be useless for debugging configuration issues. So, hold the common lock when dumping the clock summary. Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Todd Poynor <toddpoynor@google.com> [nm@ti.com: added commit message] Signed-off-by: Nishanth Menon <nm@ti.com> [paul@pwsan.com: minor edits to commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * | | | Merge tag 'omap-fixes-for-v3.5-rc3' of ↵Olof Johansson2012-06-236-31/+19
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here are a few fixes with the biggest one being fix for Beagle DVI reset. All of them are regression fixes, except for the missing omap2 interrupt controller binding that somehow got missed earlier." * tag 'omap-fixes-for-v3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: Fix Beagleboard DVI reset gpio arm/dts: OMAP2: Fix interrupt controller binding ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0 ARM: OMAP2+: Fix MUSB ifdefs for platform init code
OpenPOWER on IntegriCloud