summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* V4L/DVB (11843): ir-kbd-i2c: Don't use i2c_client.name for our own needsJean Delvare2009-06-166-15/+17
| | | | | | | | | | In the standard device driver binding model, the name field of struct i2c_client is used to match devices to their drivers, so we must stop using it for internal purposes. Define a separate field in struct IR_i2c as a replacement, and use it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11842): radio-mr800.c: missing mutex includeAlessio Igor Bogani2009-06-161-0/+1
| | | | | | | | | | | radio-mr800.c uses struct mutex, so while <linux/mutex.h> seems to be pulled in indirectly by one of the headers it already includes, the right thing is to include it directly. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11841): core: fix potential mutex_unlock without mutex_lock in ↵Simon Arlott2009-06-161-10/+4
| | | | | | | | | | | | | | | | | | | dvb_dvr_read dvb_dvr_read may unlock the dmxdev mutex and return -ENODEV, except this function is a file op and will never be called with the mutex held. There's existing mutex_lock and mutex_unlock around the actual read but it's commented out. These should probably be uncommented but the read blocks and this could block another non-blocking reader on the mutex instead. This change comments out the extra mutex_unlock. [akpm@linux-foundation.org: cleanups, simplification] Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11840): change kmalloc to vmalloc for sglist allocation in ↵Cohen David.A2009-06-162-8/+11
| | | | | | | | | | | | | | | | | videobuf_dma_map/unmap Change kmalloc()/kfree() to vmalloc()/vfree() for sglist allocation during videobuf_dma_map() and videobuf_dma_unmap() High resolution sensors might require too many contiguous pages to be allocated for sglist by kmalloc() during videobuf_dma_map() (i.e. 256Kib for 8MP sensor). In such situations, kmalloc() could face some problem to find the required free memory. vmalloc() is a safer solution instead, as the allocated memory does not need to be contiguous. Signed-off-by: David Cohen <david.cohen@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11837): uvcvideo: Start status polling on device openLaurent Pinchart2009-06-164-3/+34
| | | | | | | | | | | | | | | | | | | | | Most UVC camera include an interrupt endpoint to report control value changes, video streaming errors and camera button events. The USB controller continuously polls the interrupt endpoint to retrieve such events. This prevents the device from being auto-suspended, and thus consumes power. Reporting video streaming errors don't make sense when the V4L2 device is closed. Control value changes are probably useless as well if nobody listens to the events, although caching will probably have to be completely disabled then. No polling is thus be required when /dev/videoX is not opened. To enable auto-suspend and save power do not poll the interrupt endpoint until the device is open. We lose the ability to detect button events if no application is using the camera. http://bugzilla.kernel.org/show_bug.cgi?id=11948 Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11836): uvcvideo: Add missing whitespaces to multi-line format strings.Laurent Pinchart2009-06-161-8/+8
| | | | | Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11835): uvcvideo: Parse frame descriptors with non-continuous indexes.Laurent Pinchart2009-06-162-28/+13
| | | | | | | | | | The UVC specification requires frame descriptors indexes to range from 1 to the number of frame descriptors. At least some Hercules Dualpix Infinite webcams erroneously use non-continuous index ranges. Make the driver support them. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11833): dvb-usb: Remove support for Genpix-CW3K (damages hardware)Alan Nisota2009-06-161-6/+2
| | | | | | | | | | | | I have been informed by the manufacturer that the patch currently in the v4l tree to support the Genpix-CW3K version of the hardware will actually damage the firmware on recent units. As he seems to not want this hardware supported in Linux, and I do not know how to detect the difference between affected and not-affected units, I am requesting the immediate removal of support for this device. This patch removes a portion of the changeset dce7e08ed2b1 applied 2007-08-18 relating to this specific device. Adapted patch to not remove code, but to only to comment it out. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11832): dibusb_mc: fix i2c to not corrupt eeprom in case of strange ↵matthieu castet2009-06-161-2/+5
| | | | | | | | | | | | | | | | | | read pattern dibusb_i2c_xfer seems to do things very dangerous : it assumes that it get only write/read request or write request. That means that read can be understood as write. For example a program doing file = open("/dev/i2c-x", O_RDWR); ioctl(file, I2C_SLAVE, 0x50) read(file, data, 10) will corrupt the eeprom as it will be understood as a write. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11831): dib0700: added USB IDs for Terratec T3 and T5Patrick Boettcher2009-06-162-4/+10
| | | | | | | This patch adds the USB IDs for the Terratec devices T3 and T5. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11830): dib0700: add support for Leadtek WinFast DTV Dongle Htomas petr2009-06-162-1/+8
| | | | | | | | | | "Leadtek WinFast DTV Dongle H" is a hybrid digital/analog USB-stick TV receiver. The code below allows the digital part to work with dvb_usb in linux. Signed-off-by: tomas petr <tom-petr@seznam.cz> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11829): Rewrote frontend-attach mechanism to gain noise-less ↵Patrick Boettcher2009-06-162-355/+413
| | | | | | | | | | | | | deactivation of submodules This patch is reorganizing the frontend-attach mechanism in order to gain noise-less (superflous prints) deactivation of submodules. Credits go to Uwe Bugla for helping to clean and test the code. Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11828): Reducing print-level of I2C error printsMatthias Schwarzott2009-06-162-2/+2
| | | | | | | | | Reducing the print-levle of I2C error prints cleans some unwanted but unavoidable errors from default syslog-level. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11827): Add support for Terratec Grabster AV350Mauro Carvalho Chehab2009-06-162-0/+33
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11825): em28xx: add Terratec GrabbyMauro Carvalho Chehab2009-06-162-0/+19
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11810): em28xx: properly set packet size based on the device's ↵Devin Heitmueller2009-06-164-2/+56
| | | | | | | | | | | | | | | | | | | | eeprom configuration. The em28xx actually has a register that tells the driver what the maximum packet size is (based on a value programmed into the eeprom). Make use of that register instead of assuming a hardcoded value of 564 (since 564 is not correct for devices that do QAM such as the KWorld 340u). Note that for now the em2874 code isn't there, falling back to the 564 value, however this is not a problem since there are not any em2874 based devices in the current v4l-dvb tree). Thanks to Jarod Wilson for detecting the initial problem and figuring out that the isoc configuration was wrong for his device. Cc: Jarod Wilson <jarod@wilsonet.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11808): au0828: get rid of debug printk that was causing compile ↵Devin Heitmueller2009-06-161-5/+0
| | | | | | | | | | | failures Remove a debug printk() line I added which is no longer needed, and happened to be causing compile failures on some earlier kernels in Han's daily compile report. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11807): cx88: remove xc5000 reset for Pinnacle 800iDevin Heitmueller2009-06-161-4/+16
| | | | | | | | | | | | | | | | | | | | | | | According to the engineer at PCTV Systems, the xc5000 reset pin is supposed to be on GPIO12. However, despite three nights of effort, pulling that GPIO low didn't reset the xc5000. While pulling MO_SRST_IO low does reset the xc5000, this also resets in the s5h1409 being reset as well. This causes tuning to always fail since the internal state of the s5h1409 does not match the driver's state. Given that the only two conditions in which the driver performs a reset is during firmware load and powering down the chip, I am taking out the reset. We know that the chip is being reset when the cx88 comes online, and not being able to do power management for this board is better than not having any tuning at all. Problem discovered when implementing proper power management for the xc5000, which results in calls to the reset callback *after* s5h1409 is initialized. Cc: Steven Toth <stoth@kernellabs.com> Cc: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11806): xc5000: add copyright lineDevin Heitmueller2009-06-161-0/+1
| | | | | | | | Add copyright line for xc5000.c. Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11805): au0828: send command to power down tuner when done with analogDevin Heitmueller2009-06-161-0/+3
| | | | | | | | Make sure the au0828 issues the command to power down the tuner when the user is done using analog support. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11804): xc5000: poll at 5ms interval for register write command ↵Devin Heitmueller2009-06-161-2/+2
| | | | | | | | | | | | | | | | completion Instead of polling at 100ms intervals for register writes, poll at 5ms intervals. This is consistent with the xc5000 specification, and improves tuning time by up to 500 ms on devices that such as the au0828 which do not properly implement i2c clock stretching (since the five register writes that occur for a tuning request often do not complete immediately but do complete far before 100ms has gone by). The net amount of time we wait before timing out is unchanged (500ms). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11803): xc5000: add support for DVB-T tuningDavid T.L. Wong2009-06-161-18/+45
| | | | | | | | This patch adds XC5000 supports for DVB-T 6MHz and 8MHz bandwidth. Signed-off-by: David T.L. Wong <davidtlwong@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11802): xc5000: switch to new xc5000 firmware 1.6.114 with ↵Devin Heitmueller2009-06-161-2/+2
| | | | | | | | | | | | | redistribution rights Xceive has graciously allowed us to now freely redistribute the xc5000 firmware, which eliminates the need for users to manually extract the blob from the Hauppauge driver. Thanks to Brian Mathews <bmathews@xceive.com> for providing this code Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11801): dib0700: reduce xc5000 sleep time for Pinnacle 801e to 10msDevin Heitmueller2009-06-161-2/+2
| | | | | | | According to the xc5000 spec, the reset pin only needs to be held low for 10ms. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11800): tuner-xc2028: show the proper module description for ↵Devin Heitmueller2009-06-161-1/+1
| | | | | | | | | | no_poweroff option There was a typo in the module description for the "no_poweroff" option, where the help was being associated with the "debug" option instead. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11799): xc5000: don't load firmware until a tuning request is madeDevin Heitmueller2009-06-161-4/+0
| | | | | | | | | | | | Defer loading of the xc5000 firmware until it is actually needed. This helps on distros that have hald, which results in the device not being available for use for around ten seconds in cases where the i2c bus is slow (such as the HVR-950Q). Also, the firmware load isn't really useful since we immediately put the device to sleep afterward, which means a firmware reload will be required anyway. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11798): xc5000: add "no_poweroff" module optionDevin Heitmueller2009-06-161-0/+10
| | | | | | | | | | Provide for the ability for a user to disable putting the tuner to sleep, in case he doesn't want to incur the cost of reloading the firmware when starting up his/her application. The module options are intentionally identical to xc3028. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11797): xc5000: cleanup firmware loading messagesDevin Heitmueller2009-06-161-2/+3
| | | | | | | | | Make it a little more obvious in the dmesg output what is going on during firmware upload. This is more important for boards like the HVR-950q that take nearly seven seconds to do the upload. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11796): xc5000: start using the newer "finerfreq" tuning commandDevin Heitmueller2009-06-161-2/+5
| | | | | | | | | Starting in firmware version 1.1.44, Xceive recommends using the FINERFREQ for all normal tuning (the doc indicates reg 0x03 should only be used for fast scanning for channel lock) Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11795): xc5000: add build version to debug infoDevin Heitmueller2009-06-161-2/+10
| | | | | | | Expose the firmware build number along with the other version info Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11794): au0828: reduce reset time for xc5000 to 10msDevin Heitmueller2009-06-161-2/+2
| | | | | | | | | The xc5000 datasheet indicates that the reset pin only needs to be held low for 10ms. Reduce the value accordingly, which speeds up the firmware load time a bit. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11793): xc5000: Properly support power down for newer firmwareDevin Heitmueller2009-06-161-3/+5
| | | | | | | | | Xceive got rid of the XREG_POWER_DOWN register in later firmware revisions. Their technical support informed me that the correct way to put the tuner to sleep is to pull the reset pin (but don't reload the firmware). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11792): xc5000: switch to new version of Xceive firmwareDevin Heitmueller2009-06-161-2/+2
| | | | | | | | | This switches to a new version of the xc5000 firmware, extracted from the latest Hauppauge driver. It includes the support for the XREG_BUSY register (a lack of which was causing tuning to take 3200ms instead of around 300ms). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11791): xc5000: do not sleep after digital tuningDevin Heitmueller2009-06-161-5/+9
| | | | | | | | | Don't sleep for 400ms polling the tuner's lock if in digital mode (since the xc5000 lock status registers appear to only be reliable in analog mode) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11790): xc5000: restore sleep routineDevin Heitmueller2009-06-161-18/+5
| | | | | | | | | | | | | | | | | Bring back the code that puts the xc5000 to sleep. For the Pinnacle 801e this results in power consumption at idle dropping from 325ma to 124ma. If there are *actually* any devices that don't work in this configuration, they should set dvb_frontend.ops.tuner_ops.sleep to NULL (per mkrufky's suggestion) Also, had to make sure we were making sure the firmware was loaded in the digital version of set_params, or else we end up get i2c errors if the device is asleep Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11789): xc5000: check xc5000_readreg return value for XC_RESULT_SUCCESSDevin Heitmueller2009-06-161-4/+4
| | | | | | | | Make return value checking for calls to i2c routines explicit. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11788): xc5000: cleanup i2c write routinesDevin Heitmueller2009-06-161-16/+8
| | | | | | | | | Cleanup the i2c write routine, getting rid of a passthrough function with only one caller Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11787): xc5000: cleanup i2c read routinesDevin Heitmueller2009-06-161-42/+20
| | | | | | | | | | | | This patch centralizes the i2c read functions, and eliminates pass-through function only called by one caller. Make reading of xc5000 registers an atomic i2c transaction in case we're on a multi-master bus. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11786): xc5000: handle tuner reset failures properlyDevin Heitmueller2009-06-161-14/+13
| | | | | | | | Properly handle tuner reset failures (before it was always returning success) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11775): tuner: add support Philips MK5 tunerDmitri Belimov2009-06-163-0/+32
| | | | | Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11773): cx23885: clean up struct names for Hauppauge WinTV-HVR127X ↵Michael Krufky2009-06-161-6/+6
| | | | | | | devices Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11772): cx23885: update model matrix for "k2c2" retail boardsMichael Krufky2009-06-161-0/+36
| | | | | Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11771): cx23885: add DVB-T tuning support for Hauppauge WinTV-HVR1210Michael Krufky2009-06-164-2/+44
| | | | | Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11770): cx23885: add ATSC/QAM tuning support for Hauppauge ↵Michael Krufky2009-06-164-0/+35
| | | | | | | WinTV-HVR1255 Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11769): cx23885: add ATSC/QAM tuning support for Hauppauge ↵Michael Krufky2009-06-164-2/+18
| | | | | | | WinTV-HVR1275 Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11768): cx23885: add ATSC/QAM tuning support for Hauppauge ↵Michael Krufky2009-06-162-0/+35
| | | | | | | WinTV-HVR1270 Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11767): cx23885: Add preliminary support for the HVR1270Steven Toth2009-06-163-0/+23
| | | | | | | | | | | | The patch means the board will be recognised, and the parts brought out of reset correctly. This patches depends on the centralized GPIO patch to be merged. What's missing before the HVR-1270 will function for DTV? The model# needs to be added to avoid 'unknown model' output and the LG3305/Tuner need to be attached in cx23885-dvb.c Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11766): cx23885: mark functions encoder_on_port[bc] as static inlineMichael Krufky2009-06-161-2/+2
| | | | | Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11765): cx23885: Add generic functions for driving GPIO'sSteven Toth2009-06-162-0/+98
| | | | | | | | | | | | | | The GPIO's on the product can be in one of three places. To date we've mainly used the GPIO's on the bridge itself, and once on the encoder. Rather than having the complexity of multiple GPIO writes/reads from isolated placed in the driver we'll route them through this function, so we can make intelligent decisions about 1) Where the GPIO lives and 2) Whether it conflicts (based on board) with some other function to avoid bugs. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11763): dvb-ttpci: Some whitespace adjustmentsOliver Endriss2009-06-161-13/+6
| | | | | | | Some whitespace adjustments. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
OpenPOWER on IntegriCloud