summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* batman-adv: network coding - add the initial infrastructure codeMartin Hundebøll2013-03-1310-1/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: don't use !! in bool conversionAntonio Quartulli2013-03-132-5/+5
| | | | | | | | | In C standard any expression different from 0 will be converted to 'true' when casting to bool (whatever is the length of the value). Therefore all the "!!" conversions can be removed. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* batman-adv: Return reason for failure in batadv_check_unicast_packet()Martin Hundebøll2013-03-131-4/+14
| | | | | | | | | | | batadv_check_unicast_packet() is changed to return a value based on the reason to drop the packet, which will be useful information for future users of batadv_check_unicast_packet(). Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* batman-adv: replace redundant primary_if_get callsMarek Lindner2013-03-133-46/+11
| | | | | | | | | The batadv_priv struct carries a pointer to its own interface struct. Therefore, it is not necessary to retrieve the soft_iface via the primary interface. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* qlcnic: Bump up the version to 5.1.37Shahed Shaikh2013-03-131-2/+2
| | | | | Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlcnic: Implement flash sysfs callback for 83xx adapterHimanshu Madhani2013-03-133-8/+265
| | | | | | | | | | | | QLogic applications use these callbacks to perform o NIC Partitioning (NPAR) configuration and management o Diagnostic tests o Flash access and updates Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'cpsw'David S. Miller2013-03-134-14/+165
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mugunthan V N says: ==================== This patch serires implements the following features in CPSW driver * get/set phy link settings * interrupt pacing * get phy id via ioctl cmd SIOCGMIIPHY Changes from initial version * Made active-slave common for cpts, ethtool and SIOCGMIIPHY ioctl * Cleaned CPSW DT binding documentation by seperating slave nodes under sub-section * implemented get phy id via ioctl cmd SIOCGMIIPHY ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * drivers: net: ethernet: cpsw: implement get phy_id via ioctlMugunthan V N2013-03-131-2/+14
| | | | | | | | | | | | | | | | Implement get phy_id via ioctl SIOCGMIIPHY. In switch mode active phy_id is returned and in dual EMAC mode slave's specific phy_id is returned. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * driver: net: ethernet: cpsw: implement interrupt pacing via ethtoolMugunthan V N2013-03-131-0/+104
| | | | | | | | | | | | | | | | | | This patch implements support for interrupt pacing block of CPSW via ethtool Inetrrupt pacing block is common of both the ethernet interface in dual emac mode Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * driver: net: ethernet: cpsw: implement ethtool get/set phy settingMugunthan V N2013-03-131-0/+29
| | | | | | | | | | | | | | This patch implements get/set of the phy settings via ethtool apis Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * drivers: net: ethernet: cpsw: change cpts_active_slave to active_slaveMugunthan V N2013-03-134-10/+11
| | | | | | | | | | | | | | | | | | Change cpts_active_slave to active_slave so that the same DT property can be used to ethtool and SIOCGMIIPHY. CC: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * documentation: dt: bindings: cpsw: cleanup documentationMugunthan V N2013-03-131-2/+7
|/ | | | | | | | Move all the slave note properties to separate section to reduce the confusion between slave note properties and cpsw node properties Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ks8851_mll: basic ethernet statisticsDavid J. Choi2013-03-121-6/+26
| | | | | | | Implement to collect ethernet statistical information on ks8851_mll device. Signed-off-by: David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* driver: isdn: hisax: remove cast for kmalloc/kzalloc return valueZhang Yanfei2013-03-122-2/+2
| | | | | | | | | | remove cast for kmalloc/kzalloc return value. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* driver: isdn: capi: remove cast for kmalloc return valueZhang Yanfei2013-03-121-2/+1
| | | | | | | | | | remove cast for kmalloc return value. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* mv643xx_eth with 88E1318S: support Wake on LANMichael Stapelberg2013-03-122-0/+159
| | | | | | | | | | | This has been tested on a qnap TS-119P II. Note that enabling WOL with "ethtool -s eth0 wol g" is not enough; you also need to tell the PIC microcontroller inside the qnap that WOL should be enabled by sending 0xF2 with qcontrol(1) and you have to disable EUP ("Energy-using Products", a European power-saving thing) by sending 0xF4. Signed-off-by: Michael Stapelberg <michael@stapelberg.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: add set_wol/get_wol functionsMichael Stapelberg2013-03-122-0/+26
| | | | | | | | | This allows ethernet drivers (such as the mv643xx_eth) to support Wake on LAN on platforms where PHY registers have to be configured for Wake on LAN (e.g. the Marvell Kirkwood based qnap TS-119P II). Signed-off-by: Michael Stapelberg <michael@stapelberg.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp: TLP loss detection.Nandita Dukkipati2013-03-127-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | This is the second of the TLP patch series; it augments the basic TLP algorithm with a loss detection scheme. This patch implements a mechanism for loss detection when a Tail loss probe retransmission plugs a hole thereby masking packet loss from the sender. The loss detection algorithm relies on counting TLP dupacks as outlined in Sec. 3 of: http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01 The basic idea is: Sender keeps track of TLP "episode" upon retransmission of a TLP packet. An episode ends when the sender receives an ACK above the SND.NXT (tracked by tlp_high_seq) at the time of the episode. We want to make sure that before the episode ends the sender receives a "TLP dupack", indicating that the TLP retransmission was unnecessary, so there was no loss/hole that needed plugging. If the sender gets no TLP dupack before the end of the episode, then it reduces ssthresh and the congestion window, because the TLP packet arriving at the receiver probably plugged a hole. Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp: Tail loss probe (TLP)Nandita Dukkipati2013-03-1212-28/+171
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch series implement the Tail loss probe (TLP) algorithm described in http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01. The first patch implements the basic algorithm. TLP's goal is to reduce tail latency of short transactions. It achieves this by converting retransmission timeouts (RTOs) occuring due to tail losses (losses at end of transactions) into fast recovery. TLP transmits one packet in two round-trips when a connection is in Open state and isn't receiving any ACKs. The transmitted packet, aka loss probe, can be either new or a retransmission. When there is tail loss, the ACK from a loss probe triggers FACK/early-retransmit based fast recovery, thus avoiding a costly RTO. In the absence of loss, there is no change in the connection state. PTO stands for probe timeout. It is a timer event indicating that an ACK is overdue and triggers a loss probe packet. The PTO value is set to max(2*SRTT, 10ms) and is adjusted to account for delayed ACK timer when there is only one oustanding packet. TLP Algorithm On transmission of new data in Open state: -> packets_out > 1: schedule PTO in max(2*SRTT, 10ms). -> packets_out == 1: schedule PTO in max(2*RTT, 1.5*RTT + 200ms) -> PTO = min(PTO, RTO) Conditions for scheduling PTO: -> Connection is in Open state. -> Connection is either cwnd limited or no new data to send. -> Number of probes per tail loss episode is limited to one. -> Connection is SACK enabled. When PTO fires: new_segment_exists: -> transmit new segment. -> packets_out++. cwnd remains same. no_new_packet: -> retransmit the last segment. Its ACK triggers FACK or early retransmit based recovery. ACK path: -> rearm RTO at start of ACK processing. -> reschedule PTO if need be. In addition, the patch includes a small variation to the Early Retransmit (ER) algorithm, such that ER and TLP together can in principle recover any N-degree of tail loss through fast recovery. TLP is controlled by the same sysctl as ER, tcp_early_retrans sysctl. tcp_early_retrans==0; disables TLP and ER. ==1; enables RFC5827 ER. ==2; delayed ER. ==3; TLP and delayed ER. [DEFAULT] ==4; TLP only. The TLP patch series have been extensively tested on Google Web servers. It is most effective for short Web trasactions, where it reduced RTOs by 15% and improved HTTP response time (average by 6%, 99th percentile by 10%). The transmitted probes account for <0.5% of the overall transmissions. Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* fec: Use devm_request_and_ioremap()Fabio Estevam2013-03-121-18/+3
| | | | | | | Using devm_request_and_ioremap() can make the code cleaner and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* fec: Remove unused pci headerFabio Estevam2013-03-121-1/+0
| | | | | | | PCI header is not needed, so get rid of it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: using for_each_set_bit to simplify the codeWei Yongjun2013-03-122-12/+3
| | | | | | | Using for_each_set_bit() to simplify the code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: using for_each_set_bit_from to simplify the codeWei Yongjun2013-03-121-3/+1
| | | | | | | Using for_each_set_bit_from() to simplify the code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: use list_move instead of list_del/list_addWei Yongjun2013-03-121-2/+1
| | | | | | | | Using list_move() instead of list_del() + list_add(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlcnic: remove duplicated include from qlcnic_sysfs.cWei Yongjun2013-03-121-2/+0
| | | | | | | Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Restore FCoE 4-port devices supportDmitry Kravkov2013-03-121-10/+0
| | | | | | | | | | | bnx2x FW 1.78.17 properly supports DCBX configuration for 4-port devices, enabling FCoE support on 57840 boards. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: use FW 7.8.17Dmitry Kravkov2013-03-127-147/+338
| | | | | | | | | | Update appropriate HSI files and adapt driver accordingly. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Avoid using zero MACYuval Mintz2013-03-121-7/+5
| | | | | | | | | | Prevent bnx2x devices which are used mainly for storage from using zero MAC addresses as their primary MAC address. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Control SFP+ tap values via nvm configYaniv Rosner2013-03-122-34/+60
| | | | | | | | | Configure SFP+ tap values to optimize link signal according to NVRAM setup. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Add EEE support for BCM84834Yaniv Rosner2013-03-121-1/+2
| | | | | | | Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Add RJ45 SFP module detectionYaniv Rosner2013-03-121-8/+13
| | | | | | | | | | Add RJ45 SFP module detection. In case the user set 10G link speed, and the module doesn't support it, then force the speed to 1G and notify the user. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Get gso_segs from FWYuval Mintz2013-03-121-4/+5
| | | | | | | Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Control number of vfs dynamicallyAriel Elior2013-03-124-44/+91
| | | | | | | | | | | | 1. Support sysfs interface for getting the maximal number of virtual functions of a given physical function. 2. Support sysfs interface for getting and setting the current number of virtual functions. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Add iproute2 support for vfsAriel Elior2013-03-128-46/+277
| | | | | | | | | | | This patch adds support for iproute2 callbacks allowing querying a physical function as to its child virtual functions, and setting the macs and vlans of said virtual functions. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Prevent "Unknown MF" print in SF modeAriel Elior2013-03-121-0/+3
| | | | | | | | | | | | When using a chip operating in Single Function mode, when the chip is probed the bnx2x would print a message warning of an unknown Multi Function mode. This patch prevents said message. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Take chip version from MFWYuval Mintz2013-03-122-6/+8
| | | | | | | | | | | In latest boards, the CHIP_METAL register contains an incorrect revision value, so the correct one needs to be obtained in a different manner. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Set ethtool ops for vfsAriel Elior2013-03-123-4/+29
| | | | | | | | | | | | | Virtual functions don't have access to HW registers, therefore most ethtool ops are forbidden to them. Instead of checking in each op whether the device being driven is a virtual function or a physical function, this patch creates a separate ethtool ops struct for virtual functions and uses it to initialize the ethtool ops of the driver in case it is driving a virtual function device. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: fix vlan-mac memory leakYuval Mintz2013-03-121-0/+1
| | | | | | | | | | Release (previously leaking) memory when elements are removed from pending execution lists in the bnx2x driver. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet: amd: use PTR_RET instead of IS_ERR + PTR_ERRSilviu-Mihai Popescu2013-03-124-10/+4
| | | | | | | | | This uses PTR_RET instead of IS_ERR and PTR_ERR in order to increase readability. Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com> Acked-by: <Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy/micrel: move flag handling to function for common useHector Palacios2013-03-121-9/+18
| | | | | | | | | | | The flag MICREL_PHY_50MHZ_CLK is not of exclusive use of KSZ8051 model. At least KSZ8021 and KSZ8031 models also use it. This patch moves the handling of this and future flags to a separate function so that the different PHY models can call it on their init function, if needed. Signed-off-by: Hector Palacios <hector.palacios@digi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy/micrel: Add support for KSZ8031Hector Palacios2013-03-122-0/+15
| | | | | | | | | | Micrel PHY KSZ8031 is similar to KSZ8021 and also requires the special initialization of "Operation Mode Strap Override" in reg 0x16 introduced in 212ea99 (phy/micrel: Implement support for KSZ8021). Signed-off-by: Hector Palacios <hector.palacios@digi.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2013-03-12335-1609/+2687
|\ | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/intel/e1000e/netdev.c Minor conflict in e1000e, a line that got fixed in 'net' has been removed in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * bridge: reserve space for IFLA_BRPORT_FAST_LEAVEstephen hemminger2013-03-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bridge multicast fast leave feature was added sufficient space was not reserved in the netlink message. This means the flag may be lost in netlink events and results of queries. Found by observation while looking up some netlink stuff for discussion with Vlad. Problem introduced by commit c2d3babfafbb9f6629cfb47139758e59a5eb0d80 Author: David S. Miller <davem@davemloft.net> Date: Wed Dec 5 16:24:45 2012 -0500 bridge: implement multicast fast leave Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller2013-03-121-3/+3
| |\ | | | | | | | | | | | | | | | | | | Included changes ares: - fix packet parsing routine to avoid to read beyond the packet boundary Signed-off-by: David S. Miller <davem@davemloft.net>
| | * batman-adv: verify tt len does not exceed packet lenMarek Lindner2013-03-111-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | batadv_iv_ogm_process() accesses the packet using the tt_num_changes attribute regardless of the real packet len (assuming the length check was done before). Therefore a length check is needed to avoid reading random memory. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
| * | net/ipv4: Ensure that location of timestamp option is storedDavid Ward2013-03-121-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is needed in order to detect if the timestamp option appears more than once in a packet, to remove the option if the packet is fragmented, etc. My previous change neglected to store the option location when the router addresses were prespecified and Pointer > Length. But now the option location is also stored when Flag is an unrecognized value, to ensure these option handling behaviors are still performed. Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cxgb4: Allow for backward compatibility with new VPD scheme.Santosh Rastapur2013-03-121-3/+9
| |/ | | | | | | | | | | | | | | | | | | | | New scheme calls for 3rd party VPD at offset 0x0 and Chelsio VPD at offset 0x400 of the function. If no 3rd party VPD is present, then a copy of Chelsio's VPD will be at offset 0x0 to keep in line with PCI spec which requires the VPD to be present at offset 0x0. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2013-03-114-14/+40
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc minor fixes mostly related to tracing" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: s390: Fix a header dependencies related build error tracing: update documentation of snapshot utility tracing: Do not return EINVAL in snapshot when not allocated tracing: Add help of snapshot feature when snapshot is empty ftrace: Update the kconfig for DYNAMIC_FTRACE
| | * s390: Fix a header dependencies related build errorLi Zefan2013-03-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 877c685607925238e302cd3aa38788dca6c1b226 ("perf: Remove include of cgroup.h from perf_event.h") caused this build failure if PERF_EVENTS is enabled: In file included from arch/s390/include/asm/perf_event.h:9:0, from include/linux/perf_event.h:24, from kernel/events/ring_buffer.c:12: arch/s390/include/asm/cpu_mf.h: In function 'qctri': arch/s390/include/asm/cpu_mf.h:61:12: error: 'EINVAL' undeclared (first use in this function) cpu_mf.h had an implicit errno.h dependency, which was added indirectly via cgroups.h but not anymore. Add it explicitly. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Link: http://lkml.kernel.org/r/51385F79.7000106@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * tracing: update documentation of snapshot utilityHiraku Toyooka2013-03-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, "snapshot" file returns success on a reset of snapshot buffer even if the buffer wasn't allocated, instead of returning EINVAL. This patch updates snapshot desctiption according to the change. Link: http://lkml.kernel.org/r/51399409.4090207@hitachi.com Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
OpenPOWER on IntegriCloud