summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* sh: mach-migor: Kill off unused Migo-R machvec.Paul Mundt2008-12-221-9/+0
| | | | | | | | This kills off the special Migo-R machvec, as nothing is using it. By default this will switch to using the generic machvec, which provides the same functionality. This saves us a bit of space in the machvec section. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: add ov772x reset delay on Migo-RMagnus Damm2008-12-221-0/+1
| | | | | | | Add reset delay for the ov772x device on Migo-R. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Drop the special qemu defconfig.Paul Mundt2008-12-221-949/+0
| | | | | | | QEMU can now use rts7751r2dplus_defconfig directly, there is no more need for a neutered defconfig. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Delete unnecessary mov in the interrupt exception entry point.Aoi Shinkai2008-12-221-2/+2
| | | | | | | | | The INTEVT read at interrupt exception entry is uneccessary, as the read is deferred until we are ready to enter do_IRQ(). The kgdb nmi path still requires it, so move it there. Signed-off-by: Aoi Shinkai <shinkoi2005@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Fix an off-by-1 check in __mutex_fastpath_unlock().Paul Mundt2008-12-221-1/+1
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Update rsk701_defconfig to reflect mach-rsk changes.Paul Mundt2008-12-221-1/+13
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Enable leds-gpio in rsk7203 defconfig.Paul Mundt2008-12-221-12/+53
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Consolidate rsk7203/7201 in to a new mach-rsk.Paul Mundt2008-12-228-100/+44
| | | | | | | RSK+ platforms have quite a few characteristics in common, so roll them together in to a shiny new RSK mach-type. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Provide ftrace_make_call()/ftrace_make_nop().Paul Mundt2008-12-221-0/+24
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Disable -Werror for arch/sh/oprofile/.Paul Mundt2008-12-221-2/+0
| | | | | | | drivers/oprofile/ objects have proven to be problematic in this regard, so simply disable -Werror for now. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Add plain udivsi3 (not _i4*) for gcc-4.1 and lower.Takashi YOSHII2008-12-224-629/+713
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We chan't share code for udivsi3 and udivsi3_i4, because they have a different clobber list. Copy udivsi3 from gcc-4.1.2. As shown in arch/sh/lib/udivsi3.S (and -Os.S), .global __udivsi3_i4i .global __udivsi3_i4 .global __udivsi3 __udivsi3_i4i: ... Three symbols are sharing one code, which is actually udivsi3_i4i. But, this results unwanted code with gcc 4.1. In gcc, these three are treated as pseudo instructions that have their own clobber list apart from the usual calling convention. According to sh's machine description. The clobber list is as follows: - udivsi3_i4i : t,r1,pr,mach,macl - udivsi3_i4 : t,r0,r1,r4,r5,pr,dr0,dr2,dr4 - udivsi3 : t,r4,pr The caller of udivsi3 will be left with a broken r1 and mac*. gcc-4.1.x and older(at least to 3.4) generate udivsi3. ST's gcc-4.1.1 seems to be OK because it has _i4i. Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* Fix incorrect use of loose in c-checksum.cNick Andrew2008-12-221-2/+2
| | | | | | | | | Fix incorrect use of loose in c-checksum.c It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Fix up the SH-4A mutex fastpath semantics.Paul Mundt2008-12-221-16/+21
| | | | | | | | | This fixes up the __mutex_fastpath_xxx() routines to match the semantics noted in the comment. Previously these were looping rather than doing a single-pass, which is counter-intuitive, as the slow path takes care of the looping for us in the event of contention. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: allow CONFIG_CPU_IDLEMagnus Damm2008-12-221-1/+3
| | | | | | | Allow users to select CONFIG_CPU_IDLE regardless of processor type or board. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: allow CONFIG_PMMagnus Damm2008-12-221-6/+9
| | | | | | | | Allow users to select CONFIG_PM regardless of processor type or board. Suspend and hibernation are only allowed on supported platforms. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: move the hp6xx pm codeMagnus Damm2008-12-225-108/+77
| | | | | | | | | | Move the not-so-generic pm code from arch/sh/kernel/pm.c to the platform directory together with the rest of the hp6xx pm code. This is done to let non-hp6xx platforms enable CONFIG_PM. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: update se7343 defconfigMagnus Damm2008-12-221-29/+274
| | | | | | | | | | | | | | | | Update the se7343 defconfig with: - use 33MHz PCLK - increase max number of SCIFs - add serial console configuration to compiled-in kernel command line - add 8250 serial port support - add sh-mobile-i2c driver - add uio driver to export VEU and VPU - add usb support and isp1161 host controller - add dm9601 ethernet-over-usb support - remove smc91x support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: remove ioport cruft and smc91x from se7343Magnus Damm2008-12-224-323/+1
| | | | | | | | | Remove out-of-date se7343 ioport code including some old support for unknown-ne2000-pcmcia-card, cf-over-pcmcia and a mysterical smc91x that once must have been on a special daughterboard. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: add isp1161 usb host device to se7343Magnus Damm2008-12-221-0/+45
| | | | | | | Add isp1161 platform data to get usb host working on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: add st16c2550 devices to se7343Magnus Damm2008-12-222-1/+38
| | | | | | | Add 8250 platform data to setup the ST16C2550C chip on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: fix number of interrupts on se7343Magnus Damm2008-12-221-1/+1
| | | | | | | | Fix to make sure that the on-board interrupt sources are included in the interrupt count on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: sh7343 scif configuration updateMagnus Damm2008-12-221-2/+17
| | | | | | | | Fix interrupt values for the first sh7343 SCIF port and update the configuration to include the remaining 3 ones. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: propagate r_clkMagnus Damm2008-12-221-0/+2
| | | | | | | | Make sure the 32 KHz r_clk rate gets propagated correctly. Without this fix the clocks for RTC, CMT, KEYSC and RWDT are stuck at 0 Hz. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: RSK+ 7201 board support.Peter Griffin2008-12-225-0/+802
| | | | | | | This patch adds support for the RTE RSK+ 7201 board. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Add support for SH7201 CPU subtype.Peter Griffin2008-12-2210-8/+455
| | | | | | | This patch adds support for the SH-2A FPU based SH7201 processor subtype. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Switch HD64461 from hw_interrupt_type to irq_chipMatt Fleming2008-12-221-90/+25
| | | | | | | | | | | | | | Use struct irq_chip for the interrupt handler for the HD64461. Also convert some in{b,w} and out{b,w} calls to the equivalent __raw_* calls. Include <linux/io.h> and not <asm/io.h> to stop checkpatch.pl complaining. This change should now allow machines with HD64461 to define GENERIC_HARDIRQS_NO__DO_IRQ. Acked-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: pci-sh7780: fix pci memory address maskYoshihiro Shimoda2008-12-221-7/+5
| | | | | | | | Fix the problem that cannot work a PCI device when system memory size is 256Mbyte in 29bit address mode. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Provide a dyn_arch_ftrace struct definition.Paul Mundt2008-12-221-2/+7
| | | | | | Needed for dynamic ftrace API changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Split out the idle loop for reuse between _32/_64 variants.Paul Mundt2008-12-225-123/+83
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Consolidate cpu_relax()/cpu_sleep() definitions across _32/_64.Paul Mundt2008-12-223-5/+3
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: do not latency trace idle.Paul Mundt2008-12-221-0/+4
| | | | | | | | | | | | | Description snipped from Steven Rostedt's PPC patch: When idle is called, interrupts are blocked, but the idle function will still wake up on an interrupt. The problem is that the interrupt disabled latency tracer will take this call to idle as a latency. This patch disables the latency tracing when going into idle. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Tidy up backtrace formatting with kallsyms disabled.Paul Mundt2008-12-222-6/+3
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Add a simple code dumper for SUPERH32 show_regs().Paul Mundt2008-12-224-3/+579
| | | | | | | | | | This implements a simple show_code() that is in turn plugged in to show_regs() to provide minimal code dumping at the end of the trace. Built on top of a simple instruction disassembler derived from the binutils opcode table. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Add a few more branch types to the branch emulator.Paul Mundt2008-12-221-6/+11
| | | | | | | This plugs in some extra encodings for matching more bsr/bsrf/jsr branches. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Re-add support for best fit ISA tuning if none is available.Paul Mundt2008-12-221-5/+20
| | | | | | | | | | | This was removed in the libgcc integration, but there are still some compilers that need this. We also relax the rules on the ISA tuning in the cases where there are no matches for the CPU tuning and adopt the -any default, which matches the intent of the isa-y target list. This compensates for mismatches where binutils supports a wide array of targets whilst the compiler is much more restricted. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: More movmem alias symbol exports for older compilers.Paul Mundt2008-12-221-0/+3
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Provide optimized unaligned loads on SH-4A.Paul Mundt2008-12-222-1/+264
| | | | | | | | | | This adds support for unaligned loads on SH-4A, using the SH-4A's neutered movua.l instruction. As movua.l is r0-inspired, stores are still handled through the packed struct. Based on asm-generic/unaligned.h by Harvey Harrison. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: P4 ioremap pass-throughMagnus Damm2008-12-224-12/+17
| | | | | | | | | | | | | | | | | | | | This patch adds a pass-through case when ioremapping P4 addresses. Addresses passed to ioremap() should be physical addresses, so the best option is usually to convert the virtual address to a physical address before calling ioremap. This will give you a virtual address in P2 which matches the physical address and this works well for most internal hardware blocks on the SuperH architecture. However, some hardware blocks must be accessed through P4. Converting the P4 address to a physical and then back to a P2 does not work. One example of this is the sh7722 TMU block, it must be accessed through P4. Without this patch P4 addresses will be mapped using PTEs which requires the page allocator to be up and running. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Add SH-4A optimized fastpath mutex implementation.Michael Trimarchi2008-12-222-1/+111
| | | | | | | Add fast mutex path implementation for the SH4A architecture Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: sh7760fb: Add support SH7720/SH7721 of RenesasNobuhiro Iwamatsu2008-12-221-11/+13
| | | | | | | | SH7720 and 7721 has IP of Frame Buffer same as SH7760. This driver can support these. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: sh7760fb: Fix color pallette settingNobuhiro Iwamatsu2008-12-221-67/+19
| | | | | | | | The setting of the color palette was wrong, fixed it. And removed fb_setcmap, and added fb_setcolreg function. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: add SH DMAC burst mode constantSteve Glendinning2008-12-221-0/+1
| | | | | | | | The SH7709 datasheet defines bit 5 as set for burst mode, clear for cycle-steal mode. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: fix DMAOR register access on SH7709Steve Glendinning2008-12-221-1/+2
| | | | | | | | | | sh7709 hardware manual says DMAOR is 16 bits long on this platform. Tested and working with a modified smsc911x ethernet driver (sh-dma support patch for this driver is coming soon). Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Add platform-specific constants for SH7709Steve Glendinning2008-12-222-0/+32
| | | | | | | | I'm using these constants in support of an in-house development board, and thought they may be useful to other users of SH7709. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Provide optimized non-atomic bitops for SH-2A.Paul Mundt2008-12-222-0/+145
| | | | | | This ties in the new SH-2A 32-bit non-atomic bitops. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Add -m4al tuning for SH4AL-DSP.Paul Mundt2008-12-221-0/+1
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Add exports for __udivsi3/__sdivsi3 and the _i4 versions.Paul Mundt2008-12-223-0/+12
| | | | | | Needed by older compilers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Convert to generic bitops for IRQ-toggling implementation.Paul Mundt2008-12-224-95/+7
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Specify sane default image targets for the SH-2 platforms.Paul Mundt2008-12-221-0/+3
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Migrate necessary libgcc bits in to arch/sh/lib for SUPERH32.Paul Mundt2008-12-2215-50/+1984
| | | | | | | | This moves in the necessary libgcc bits for SUPERH32 and drops the libgcc linking for the regular targets. This in turn allows us to rip out quite a few hacks both in sh_ksyms_32 and arch/sh/Makefile. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
OpenPOWER on IntegriCloud