summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ide: don't set hwif->dma_ops in init_dma() methodSergei Shtylyov2009-01-063-6/+2
| | | | | | | | | | | Replace setting of 'hwif->dma_ops' in the 'alim15x3' and 'palm_bk3710' drivers' init_dma() methods with initializing the corresponding member of their 'struct ide_port_info' instances and remove such setting from the 'hpt366' driver that just doesn't use 'sff_dma_ops'. Along with some code save, this prepares us for the next patch... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Resurrect IT8172 IDE controller driverShane McDonald2009-01-064-0/+175
| | | | | | | | | | | | | | | | | | | | | | | | | Support for the IT8172 IDE controller was removed from the kernel sometime after 2.6.18. Support for the only boards that used the IT8172 was removed from the kernel after 2.6.18, as they had never compiled since 2.6.0. However, there are a couple of platforms that use this chip: the PMC-Sierra Xiao Hu thin-client computer, which is no longer in production, and the Linksys NSS4000 Network Attached Storage box, which is based on the Xiao Hu board. I am attempting to add support for the Xiao Hu to the kernel, and this IT8172 IDE controller is the first bit of code in this effort. This patch resurrects the IT8172 IDE controller code. I began with the 2.6.18 version of the it8172.c file, and have moved it forward so that it works with the latest version of the kernel. I have run this driver on a PMC-Sierra Xiao Hu board with the 2.6.28 kernel, and I have had no problems with it in my configuration. The attached patch applies cleanly against 2.6.28. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: alan@lxorguk.ukuu.org.uk [bart: s/HWIF(drive)/drive->hwif/] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* piix: sync ich_laptop[] with ata_piix.cBartlomiej Zolnierkiewicz2009-01-061-0/+2
| | | | | | Allows UDMA > 33 on ACER TM290 and ACER Aspire 1694WLMi. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: update warm-plug HOWTOBartlomiej Zolnierkiewicz2009-01-061-0/+5
| | | | | Reported-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: fix ide_port_scan() to do ACPI setup after initializing request queuesBartlomiej Zolnierkiewicz2009-01-061-1/+1
| | | | | | | | This makes ide_port_scan()'s behavior match ide_host_register()'s one and fixes OOPS in elv_may_queue() during port re-scan. Reported-and-tested-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove now redundant ->cur_dev checksBartlomiej Zolnierkiewicz2009-01-061-61/+46
| | | | | | | | | | | * ->cur_dev should now be always valid if ->handler is set so remove redundant checks from ide_intr() and ide_timer_expiry(). * Apply CodingStyle fixups in ide_timer_expiry() while at it. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove unused ide_hwif_t.sg_mapped fieldBartlomiej Zolnierkiewicz2009-01-061-1/+0
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: struct ide_atapi_pc - remove unused fields and update documentationBartlomiej Zolnierkiewicz2009-01-061-4/+0
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove superfluous hwif variable assignment from ide_timer_expiry()Bartlomiej Zolnierkiewicz2009-01-061-1/+0
| | | | | | There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use ide_pci_is_in_compatibility_mode() helper in setup-pci.cBartlomiej Zolnierkiewicz2009-01-061-2/+1
| | | | | | There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: make "paranoia" ->handler check in ide_intr() more strictBartlomiej Zolnierkiewicz2009-01-061-6/+3
| | | | | | | | If ->handler is set while it shouldn't be it indicates deep problems so BUG_ON()-ning and preventing further damage is much more appropriate than merely printing an error message. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-cd: convert to ide-atapi facilitiesBorislav Petkov2009-01-063-95/+8
| | | | | | | | | | ... and remove no longer needed cdrom_start_packet_command and cdrom_transfer_packet_command. Tested lightly with ide-cd and ide-floppy. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-cd: start DMA before sending the actual packet commandBorislav Petkov2009-01-061-3/+3
| | | | | | | | | as it is done for all other IDE ATAPI devices. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-cd: wait for DRQ to get set per defaultBorislav Petkov2009-01-061-14/+7
| | | | | | | ... instead of assuming it is set for accelerated DRQ type devices. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: Fix drive's DWORD-IO handlingMario Schwalbe2009-01-061-2/+1
| | | | | | | | | | | | According the documentation, id[ATA_ID_DWORD_IO] is non-zero if the drive supports dword IO, while the code disables support by setting IDE_DFLAG_NO_IO_32BIT. In addition, this word has been reused by the ATA8 specification. This patch fixes both cases. Signed-off-by: Mario Schwalbe <schwalbe@inf.tu-dresden.de> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> [bart: remove id[ATA_ID_DWORD_IO] check altogether per Sergei's suggestion] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add port and host iteratorsBartlomiej Zolnierkiewicz2009-01-067-85/+67
| | | | | | | | | | | | | | | Add ide_port_for_each_dev() / ide_host_for_each_port() iterators and update IDE code to use them. While at it: - s/unit/i/ variable in ide_port_wait_ready(), ide_probe_port(), ide_port_tune_devices(), ide_port_init_devices_data(), do_reset1(), ide_acpi_set_state() and scc_dma_end() - s/d/i/ variable in ide_proc_port_register_devices() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: dynamic allocation of device structuresBartlomiej Zolnierkiewicz2009-01-067-33/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | Allocate device structures dynamically instead of having them embedded in ide_hwif_t: * Remove needless zeroing of port structure from ide_init_port_data(). * Add ide_hwif_t.devices[MAX_DRIVES] (table of pointers to the devices). * Add ide_port_{alloc,free}_devices() helpers and use them respectively in ide_{host,free}_alloc(). * Convert all users of ->drives[] to use ->devices[] instead. While at it: * Use drive->dn for the slave device check in scc_pata.c. As a nice side-effect this patch cuts ~1kB (x86-32) from the resulting code size: text data bss dec hex filename 53963 1244 237 55444 d894 drivers/ide/ide-core.o.before 52981 1244 237 54462 d4be drivers/ide/ide-core.o.after Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: NUMA aware allocation of host and port structuresBartlomiej Zolnierkiewicz2009-01-061-4/+5
| | | | | | kzalloc() -> kzalloc_node() in ide_host_alloc(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* it821x: use ide_get_pair_dev() helperBartlomiej Zolnierkiewicz2009-01-061-6/+2
| | | | | | | | | Because presence of the peer device was not checked in it821x_set_pio_mode() PIO0 mode was used for taskfile PIO in single device configurations. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* cmd64x: use ide_get_pair_dev() helperBartlomiej Zolnierkiewicz2009-01-061-2/+4
| | | | | | | There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* cmd640: use ide_get_pair_dev() helperBartlomiej Zolnierkiewicz2009-01-061-3/+2
| | | | | | | There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* amd74xx: use ide_get_pair_dev() helperBartlomiej Zolnierkiewicz2009-01-061-2/+2
| | | | | | | There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ->error method from struct ide_driverBartlomiej Zolnierkiewicz2009-01-065-17/+2
| | | | | | | | * Remove (now superfluous) ->error method from struct ide_driver. * Unexport __ide_error() and make it static. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: unexport ide_wait_not_busy()Bartlomiej Zolnierkiewicz2009-01-061-3/+0
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ide_driver_t typedefBartlomiej Zolnierkiewicz2009-01-0611-47/+47
| | | | | | | | While at it: - s/struct ide_driver_s/struct ide_driver/ - use to_ide_driver() macro in ide-proc.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove 'byte' typedefBartlomiej Zolnierkiewicz2009-01-065-21/+19
| | | | | | | Just use u8 instead, also s/__u8/u8/ in ide-cd.h while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ide_pci_enablebit_t typedefBartlomiej Zolnierkiewicz2009-01-062-4/+5
| | | | | | | Remove needless parens while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove local_irq_set() macroBartlomiej Zolnierkiewicz2009-01-063-4/+4
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove HWIF() macroBartlomiej Zolnierkiewicz2009-01-0635-103/+102
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: move ide_init_port_data() and friends to ide-probe.cBartlomiej Zolnierkiewicz2009-01-063-154/+136
| | | | | | | | | | | | | | | | | * Move IDE_DEFAULT_MAX_FAILURES to <linux/ide.h>. * Move ide_cfg_mtx, ide_hwif_to_major[], ide_port_init_devices_data(), ide_init_port_data(), ide_init_port_hw() and ide_unregister() to ide-probe.c from ide.c. * Make ide_unregister(), ide_init_port_data(), ide_init_port_hw() and ide_cfg_mtx static. While at it: * Remove stale ide_init_port_data() documentation and ide_lock extern. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: update ide_unregister() documentationBartlomiej Zolnierkiewicz2009-01-061-13/+5
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: merge ide_hwgroup_t with ide_hwif_t (v2)Bartlomiej Zolnierkiewicz2009-01-0626-266/+188
| | | | | | | | | | | | | | | | | | | * Merge ide_hwgroup_t with ide_hwif_t. * Cleanup init_irq() accordingly, then remove no longer needed ide_remove_port_from_hwgroup() and ide_ports[]. * Remove now unused HWGROUP() macro. While at it: * ide_dump_ata_error() fixups v2: * Fix ->quirk_list check in do_ide_request() (s/hwif->cur_dev/prev_port->cur_dev). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use lock bitops for ports serialization (v2)Bartlomiej Zolnierkiewicz2009-01-062-71/+69
| | | | | | | | | | | | | | | | | | | | | | | * Add ->host_busy field to struct ide_host and use it's first bit together with lock bitops to provide new ports serialization method. * Convert core IDE code to use new ide_[un]lock_host() helpers. This removes the need for taking hwgroup->lock if host is already busy on serialized hosts and makes it possible to merge ide_hwgroup_t into ide_hwif_t (done in the later patch). * Remove no longer needed ide_hwgroup_t.busy and ide_[un]lock_hwgroup(). * Update do_ide_request() documentation. v2: * ide_release_lock() should be called inside IDE_HFLAG_SERIALIZE check. * Add ide_hwif_t.busy flag and ide_[un]lock_port() for serializing devices on a port. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove hwgroup->hwif and {drive,hwif}->nextBartlomiej Zolnierkiewicz2009-01-063-100/+15
| | | | | | | | | | | | | | | | | | | | | * Add 'int port_count' field to ide_hwgroup_t to keep the track of the number of ports in the hwgroup. Then update init_irq() and ide_remove_port_from_hwgroup() to use it. * Remove no longer needed hwgroup->hwif, {drive,hwif}->next, ide_add_drive_to_hwgroup() and ide_remove_drive_from_hwgroup() (hwgroup->drive now only denotes the currently active device in the hwgroup). * Update locking documentation in <linux/ide.h>. While at it: * Rename ->drive field in ide_hwgroup_t to ->cur_dev. * Use __func__ in ide_timer_expiry(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use per-port IRQ handlersBartlomiej Zolnierkiewicz2009-01-064-66/+34
| | | | | | | | | Use hwif instead of hwgroup as {request,free}_irq()'s cookie, teach ide_intr() to return early for non-active serialized ports, modify unexpected_intr() accordingly and then use per-port IRQ handlers instead of per-hwgroup ones. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ->cur_port to struct ide_host and use it for serialized hostsBartlomiej Zolnierkiewicz2009-01-062-10/+16
| | | | | | | | | * Pass 'ide_hwif_t *' instead of 'ide_hwgroup_t *' to unexpected_intr(). * Cache pointer to the port currently being serviced in ->cur_port and use it instead of hwif->hwgroup on serialized hosts. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: fix setting nIEN on idle devicesBartlomiej Zolnierkiewicz2009-01-061-4/+6
| | | | | | | | Fix do_ide_request() to operate on previous device / port instead of the current one. The original code was wrong since at least Feb 2002 (2.4.0 timeframe). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: fix LOCKDEP warningBartlomiej Zolnierkiewicz2009-01-061-1/+0
| | | | | | | | | | | | | | | | | | | commit 295f00042aaf6b553b5f37348f89bab463d4a469 ("ide: don't execute the next queued command from the hard-IRQ context") overlooked that ide_do_drive_cmd() (used for REQUEST SENSE command handling) may still invoke do_ide_request() (->request_fn) in the hard-IRQ context through blk_start_queueing(). This resulted in a LOCKDEP warning after commit b599bc7a1199419e122cb2e9ec6b0fa2cfbbc17b ("ide: use per-device request queue locks (v2)"). Since calling blk_start_queuing() in ide_do_drive_cmd() doesn't make much sense as the port is already marked as busy (so the execution of the new command will be deferred anyway) then just remove it fixing LOCKDEP warning and saving some CPU cycles at the same time. Reported-and-tested-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Grissiom <chaos.proton@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds2009-01-0522-983/+1319
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm snapshot: extend exception store functions dm snapshot: split out exception store implementations dm snapshot: rename struct exception_store dm snapshot: separate out exception store interface dm mpath: move trigger_event to system workqueue dm: add name and uuid to sysfs dm table: rework reference counting dm: support barriers on simple devices dm request: extend target interface dm request: add caches dm ioctl: allow dm_copy_name_and_uuid to return only one field dm log: ensure log bitmap fits on log device dm log: move region_size validation dm log: avoid reinitialising io_req on every operation dm: consolidate target deregistration error handling dm raid1: fix error count dm log: fix dm_io_client leak on error paths dm snapshot: change yield to msleep dm table: drop reference at unbind
| * dm snapshot: extend exception store functionsJonathan Brassow2009-01-066-37/+55
| | | | | | | | | | | | | | | | | | Supply dm_add_exception as a callback to the read_metadata function. Add a status function ready for a later patch and name the functions consistently. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * dm snapshot: split out exception store implementationsAlasdair G Kergon2009-01-066-737/+833
| | | | | | | | | | | | | | | | Move the existing snapshot exception store implementations out into separate files. Later patches will place these behind a new interface in preparation for alternative implementations. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * dm snapshot: rename struct exception_storeJonathan Brassow2009-01-063-24/+25
| | | | | | | | | | | | | | Rename struct exception_store to dm_exception_store. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * dm snapshot: separate out exception store interfaceJonathan Brassow2009-01-064-120/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | Pull structures that bridge the gap between snapshot and exception store out of dm-snap.h and put them in a new .h file - dm-exception-store.h. This file will define the API for new exception stores. Ultimately, dm-snap.h is unnecessary, since only dm-snap.c should be using it. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * dm mpath: move trigger_event to system workqueueAlasdair G Kergon2009-01-061-4/+4
| | | | | | | | | | | | | | | | | | The same workqueue is used both for sending uevents and processing queued I/O. Deadlock has been reported in RHEL5 when sending a uevent was blocked waiting for the queued I/O to be processed. Use scheduled_work() for the asynchronous uevents instead. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * dm: add name and uuid to sysfsMilan Broz2009-01-064-2/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement simple read-only sysfs entry for device-mapper block device. This patch adds a simple sysfs directory named "dm" under block device properties and implements - name attribute (string containing mapped device name) - uuid attribute (string containing UUID, or empty string if not set) The kobject is embedded in mapped_device struct, so no additional memory allocation is needed for initializing sysfs entry. During the processing of sysfs attribute we need to lock mapped device which is done by a new function dm_get_from_kobj, which returns the md associated with kobject and increases the usage count. Each 'show attribute' function is responsible for its own locking. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * dm table: rework reference countingMikulas Patocka2009-01-064-20/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rework table reference counting. The existing code uses a reference counter. When the last reference is dropped and the counter reaches zero, the table destructor is called. Table reference counters are acquired/released from upcalls from other kernel code (dm_any_congested, dm_merge_bvec, dm_unplug_all). If the reference counter reaches zero in one of the upcalls, the table destructor is called from almost random kernel code. This leads to various problems: * dm_any_congested being called under a spinlock, which calls the destructor, which calls some sleeping function. * the destructor attempting to take a lock that is already taken by the same process. * stale reference from some other kernel code keeps the table constructed, which keeps some devices open, even after successful return from "dmsetup remove". This can confuse lvm and prevent closing of underlying devices or reusing device minor numbers. The patch changes reference counting so that the table destructor can be called only at predetermined places. The table has always exactly one reference from either mapped_device->map or hash_cell->new_map. After this patch, this reference is not counted in table->holders. A pair of dm_create_table/dm_destroy_table functions is used for table creation/destruction. Temporary references from the other code increase table->holders. A pair of dm_table_get/dm_table_put functions is used to manipulate it. When the table is about to be destroyed, we wait for table->holders to reach 0. Then, we call the table destructor. We use active waiting with msleep(1), because the situation happens rarely (to one user in 5 years) and removing the device isn't performance-critical task: the user doesn't care if it takes one tick more or not. This way, the destructor is called only at specific points (dm_table_destroy function) and the above problems associated with lazy destruction can't happen. Finally remove the temporary protection added to dm_any_congested(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * dm: support barriers on simple devicesAndi Kleen2009-01-065-10/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement barrier support for single device DM devices This patch implements barrier support in DM for the common case of dm linear just remapping a single underlying device. In this case we can safely pass the barrier through because there can be no reordering between devices. NB. Any DM device might cease to support barriers if it gets reconfigured so code must continue to allow for a possible -EOPNOTSUPP on every barrier bio submitted. - agk Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * dm request: extend target interfaceKiyoshi Ueda2009-01-061-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the following target interfaces for request-based dm. map_rq : for mapping a request rq_end_io : for finishing a request busy : for avoiding performance regression from bio-based dm. Target can tell dm core not to map requests now, and that may help requests in the block layer queue to be bigger by I/O merging. In bio-based dm, this behavior is done by device drivers managing the block layer queue. But in request-based dm, dm core has to do that since dm core manages the block layer queue. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * dm request: add cachesKiyoshi Ueda2009-01-061-1/+40
| | | | | | | | | | | | | | | | This patch prepares some kmem_caches for request-based dm. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * dm ioctl: allow dm_copy_name_and_uuid to return only one fieldMilan Broz2009-01-061-2/+4
| | | | | | | | | | | | | | | | | | | | | | Allow NULL buffer in dm_copy_name_and_uuid if you only want to return one of the fields. (Required by a following patch that adds these fields to sysfs.) Signed-off-by: Milan Broz <mbroz@redhat.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
OpenPOWER on IntegriCloud