summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* cfg80211/mac80211: extensible frame processingJohannes Berg2010-08-2415-195/+452
| | | | | | | | | | | | | | | Allow userspace to register for more than just action frames by giving the frame subtype, and make it possible to use this in various modes as well. With some tweaks and some added functionality this will, in the future, also be usable in AP mode and be able to replace the cooked monitor interface currently used in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove unused don't-encrypt flagJohannes Berg2010-08-241-2/+0
| | | | | | | | | | | | | When MFP is disabled, action frames will not be encrypted since they are management frames and the only management frames that can then be encrypted are authentication frames. Therefore, setting the don't-encrypt flag on action frames is unnecessary. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: mark ieee80211_hdrlen constJohannes Berg2010-08-242-2/+2
| | | | | | | | | | | | | | | | This function analyses only its single, value-passed argument, and has no side effects. Thus it can be const, which makes mac80211 smaller, for example: text data bss dec hex filename 362518 16720 884 380122 5ccda mac80211.ko (before) 362358 16720 884 379962 5cc3a mac80211.ko (after) a 160 byte saving in text size, and an optimisation because the function won't be called as often. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* drivers/net/wireless/libertas/cfg.c: needs sched.hAndrew Morton2010-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | i386 allmodconfig: drivers/net/wireless/libertas/cfg.c: In function 'lbs_scan_worker': drivers/net/wireless/libertas/cfg.c:722: error: 'TASK_NORMAL' undeclared (first use in this function) drivers/net/wireless/libertas/cfg.c:722: error: (Each undeclared identifier is reported only once drivers/net/wireless/libertas/cfg.c:722: error: for each function it appears in.) drivers/net/wireless/libertas/cfg.c: In function 'lbs_cfg_connect': drivers/net/wireless/libertas/cfg.c:1267: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function 'signal_pending' drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function 'schedule_timeout' So wait.h has a dependency on sched.h, but doesn't include sched.h. This patch doesn't fix that. Cc: Dan Williams <dcbw@redhat.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: check if WEP is available for shared key authJohannes Berg2010-08-161-0/+15
| | | | | | | | | When shared key auth is requested, cfg80211 should verify that the device is capable of WEP crypto which is required. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: dont advertise WEP if unavailableJohannes Berg2010-08-161-0/+5
| | | | | | | | When WEP is unavailable, don't advertise it to cfg80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove unused status flag checksJohannes Berg2010-08-162-20/+9
| | | | | | | | | | | | The decryption code verifies whether or not a given frame was decrypted and verified by hardware. This is unnecessary, as the crypto RX handler already does it long before the decryption code is even invoked, so remove that code to avoid confusion. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move key tfm setupJohannes Berg2010-08-161-16/+10
| | | | | | | | | There's no need to keep separate if statements for setting up the CCMP/AES-CMAC tfm structs; move that into the existing switch statement. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use cipher suite selectorsJohannes Berg2010-08-1631-260/+236
| | | | | | | | | | | | | Currently, mac80211 translates the cfg80211 cipher suite selectors into ALG_* values. That isn't all too useful, and some drivers benefit from the distinction between WEP40 and WEP104 as well. Therefore, convert it all to use the cipher suite selectors. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: [spi] use common firmware request helper and new firmware locationsDan Williams2010-08-162-80/+69
| | | | | | | | | linux-firmware puts libertas firmware in /libertas. Fix the driver to look there first, but fall back to the old firmware names if the new ones don't exist. Add preference for newer firmware versions too. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: [sdio] use common firmware request helper and new firmware locationsDan Williams2010-08-162-87/+60
| | | | | | | | | linux-firmware puts libertas firmware in /libertas. Fix the driver to look there first, but fall back to the old firmware names if the new ones don't exist. Add preference for newer firmware versions too. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: [cs] use common firmware request helper and new firmware locationsDan Williams2010-08-161-56/+74
| | | | | | | | | linux-firmware puts libertas firmware in /libertas. Fix the driver to look there first, but fall back to the old firmware names if the new ones don't exist. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: add two-stage firmware request helperDan Williams2010-08-162-0/+118
| | | | | | | | | | | | | | | SDIO, GSPI, and CS all use 2-stage firmware and the loading process and logic should be the same. Allow module parameters to override the automatic firmware choice, otherwise just walk the bus driver's firmware table and pick out the first firmware pair that exists for the given model. Some special care is taken to allow overriding of just the helper or the main firmware, but let the other of the pair be chosen automatically. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: [usb] use new firmware locationsDan Williams2010-08-162-7/+54
| | | | | | | | | Look for firmware where the linux-firmware tree actually puts it, but fall back to original firmware name & location when the new location doesn't exist. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Remove ieee80211_rx_status from rt2x00_devIvo van Doorn2010-08-166-20/+16
| | | | | | | | | | | | | | | | rt2x00 was keeping a copy of ieee80211_rx_status embedded into the rt2x00_dev structure. For each RX frame, this structure was copied into the skb->cb where mac80211 would handle it further. However at the moment only the fields current band, and frequency were updated. Whereas the band was already provided directly within the rt2x00_dev structure. Save a memcpy action, and reduce memory a bit, by adding a curr_freq field to rt2x00_dev, and completely remove the ieee80211_rx_status structure from rt2x00_dev. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Update comments regarding TXWI and TX_STA_FIFOHelmut Schaa2010-08-161-1/+26
| | | | | | | | | | Add some comments about the TXWI fields and the TX_STA_FIFO register. Especially describe the relationship between the TXWI field PACKETID and the PID field in the TX_STA_FIFO register. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Implement TX status reporting for rt2800usbIvo van Doorn2010-08-164-107/+162
| | | | | | | | | | | | | | | | | | The TX_STA_FIFO register which is used for per-frame TX frame status reporting is also valid on rt2800usb. We can move the rt2800pci_txdone function into rt2800lib where it can also be used by rt2800usb. rt2800usb needs to overwrite the txdone work handler to a different function. Both rt2800usb as rt2800_txdone need to take into account that IO failures can occur while uploading the URB, which means that when obtaining the new entry the IO status must be checked. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Request TXWI pointer from driverIvo van Doorn2010-08-164-18/+26
| | | | | | | | | | | | | | | | | The only reason why the write_tx_data callback function is needed inside the driver, is because the location of the TXWI descriptor is different on PCI and USB hardware. Except for the beacon, where the TXWI is always at the start of the SKB buffer. In both cases the drivers write_tx_data function only wrap around the function rt2800_write_txwi. Move write_tx_data completely into the rt2800lib library, and add a callback function to obtain the TXWI pointer. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Add helper function for reporting tx statusIvo van Doorn2010-08-164-13/+16
| | | | | | | | | | | | At some points, some drivers can't report the full TX status information. This can happen for the UNKNOWN state, or the FAILURE state (in case the URB failed). Add a wrapper function to simplify reporting the empty TX information. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Set MIMO PS flag in tx descriptor for STAs in dynamic SMPS modeIvo van Doorn2010-08-163-1/+14
| | | | | | Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Move USB tx/rx done handling to workqueueIvo van Doorn2010-08-165-62/+128
| | | | | | | | | | | | | | | | | | | | | Move all TX and RX completion handling into a work structure, which is handeled on the mac80211 workqueue. This simplifies the code in rt2x00lib since it no longer needs to check if the device is USB or PCI to decide which mac80211 function should be used. In the watchdog some changes are needed since it can no longer rely on the TX completion function to be run while looping through the entries. (Both functions now work on the same workqueue, so this would deadlock). So the watchdog now waits for the URB to return, and handle the TX status report directly. As a side-effect, the debugfs entry for the RX queue now correctly displays the positions of the INDEX and INDEX_DONE counters. This also implies that it is not possible to perform checks like queue_empty() and queue_full() on the RX queue. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: remove duplicate get_hw_crypto_keytype()Luis R. Rodriguez2010-08-161-17/+1
| | | | | | | | | Use ath9k_cmn_get_hw_crypto_keytype() instead which is already exported and shared, and does exactly the same thing. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* drivers/net/wireless/ath/ath9k: Adjust confusing if indentationJulia Lawall2010-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* drivers/net/wireless/prism54: Adjust confusing if indentationJulia Lawall2010-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Indent the branch of an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* drivers/net/wireless/libertas: Adjust confusing if indentationJulia Lawall2010-08-161-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the point of the patched code, err has already been tested, so it is only worthwhile to test it again in the if branches where it is changed. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: support sysfs namespacesJohannes Berg2010-08-164-2/+19
| | | | | | | | | | | Enable using network namespaces with wireless devices even when sysfs is enabled using the same infrastructure that was built for netdevs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: allow drivers to request SM PS mode changeJohannes Berg2010-08-164-1/+48
| | | | | | | | | | | | | Sometimes drivers have more information than the stack about how their antennas/chains are used, and may require that the SM PS mode be changed. This could happen, for example, when detecting that the user disconnected an antenna. Thus this patch introduces API to allow drivers to request SM PS mode changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: per interface idle notificationJohannes Berg2010-08-167-16/+81
| | | | | | | | | Sometimes we don't just need to know whether or not the device is idle, but also per interface. This adds that reporting capability to mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net: mac80211: Fix a typo.Andrea Gelmini2010-08-161-1/+1
| | | | | | | "userpace" -> "userspace" Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: deauth doesn't always imply disconnectJohannes Berg2010-08-161-2/+3
| | | | | | | | | | | When an AP sends a deauth frame, or we send one to an AP, that only means we lost our connection if we were actually connected to that AP. Check this to avoid sending spurious "disconnected" events and breaking "iw ... link" reporting. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: AMPDU rx reorder timeout timerChristian Lamparter2010-08-164-12/+97
| | | | | | | | | | | | | | | | | | | | | This patch introduces a new timer, which will release queued-up MPDUs from the reorder buffer, whenever they've waited for more than HT_RX_REORDER_BUF_TIMEOUT (which is at around 100 ms). The advantage of having a dedicated timer, instead of relying on a constant stream of freshly arriving aMPDUs to release the old ones, is particularly observable when even a small fraction of MPDUs are forever lost at low network speeds. Previously under these circumstances frames would become stuck in the reorder buffer and the network stack of both HT peers throttled back, instead of revving up and gunning the pipes. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove unused rate function parameterChristian Lamparter2010-08-161-16/+6
| | | | | | | | | This patch removes a few stale parameters and variables which survived the last, large rx-path reorganization: "mac80211: correctly place aMPDU RX reorder code" Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: put rx handlers into separate functionsChristian Lamparter2010-08-161-86/+128
| | | | | | | | | This patch takes the reorder logic from the RX path and moves it into separate routines to make the expired frame release accessible. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: shorten the calibration interval during strong interferenceFelix Fietkau2010-08-162-2/+8
| | | | | | | | | | | | | When the noise floor limits are being bypassed because of strong interference, sensitivity is also reduced. In order to recover from this as quickly as possible, trigger a long periodic calibration every second instead of every 30 seconds, until the NF median is within limits again. This is especially important if the interference lasts for a while, since it takes multiple clean NF calibrations to bring the median back to normal. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: use AP beacon miss as a trigger for fast recalibrationFelix Fietkau2010-08-164-4/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When beacons get stuck in AP mode, the most likely cause is interference. Such interference can often go on for a while, and too many consecutive beacon misses can lead to connected clients getting dropped. Since connected clients might not be subjected to the same interference if that happens to be very local, the AP should try to deal with it as good as it can. One way to do this is to trigger an NF calibration with automatic baseband update right after the beacon miss. In my tests with very strong interference, this allowed the AP to continue transmitting beacons after only 2-3 misses, which allows a normal client to stay connected. With some of the newer - really sensitive - chips, the maximum noise floor limit is very low, which can be problematic during very strong interference. To avoid an endless loop of stuck beacons -> nfcal -> periodic calibration -> stuck beacons, the beacon miss event also sets a flag, which allows the calibration code to bypass the chip specific maximum NF value. This flag is automatically cleared, as soon as the first NF median goes back below the limits for all chains. In my tests, this allowed an ath9k AP to survive very strong interference (measured NF: -68, or sometimes even higher) without losing connectivity to its clients. Even under these conditions, I was able to transmit several mbits/s through the interface. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: apply the noise floor validation to the median instead of singleFelix Fietkau2010-08-161-19/+32
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: add a separate debug level for stuck beaconsFelix Fietkau2010-08-162-3/+5
| | | | | | | | | | Stuck beacons are a useful indicator for debugging various PHY issues such as calibration. Putting them on the same debug level as the other beacon stuff makes it hard to spot them in huge amounts of spam. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Don't squash error codes in key setup functionsBen Hutchings2010-08-164-16/+14
| | | | | | | | | | | | | | | ieee80211_add_key() currently returns -ENOMEM in case of any error, including a missing crypto algorithm. Change ieee80211_key_alloc() and ieee80211_aes_{key_setup_encrypt,cmac_key_setup}() to encode errors with ERR_PTR() rather than returning NULL, and change ieee80211_add_key() accordingly. Compile-tested only. Reported-by: Marcin Owsiany <porridge@debian.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: track IBSS manager statusJohannes Berg2010-08-166-2/+25
| | | | | | | | | | | | Only the IBSS manager, ie. the station that sent the IBSS beacon last, should be replying to probe responses. This requires implementing the mac80211 tx_last_beacon callback, which we can do thanks to the ucode beacon notification. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: make iwl_set_hw_params static to _agnWey-Yi Guy2010-08-163-20/+18
| | | | | | | iwl_set_hw_params() only used by _agn, make it static Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: log pci revision idWey-Yi Guy2010-08-161-0/+1
| | | | | | | | Log the information after reading the PCI_REVISION_ID from pci config space, Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: make iwl_hw_detect static to _agnWey-Yi Guy2010-08-163-9/+7
| | | | | | | iwl_hw_detect() only used by _agn, make it static Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas_tf: if_usb.c: Some more formatting fixesThomas Klute2010-08-161-18/+31
| | | | | | | Split some long lines to make checkpatch.pl happy. ;-) Signed-off-by: Thomas Klute <thomas2.klute@uni-dortmund.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas_tf: if_usb.c: Whitespace cleanupThomas Klute2010-08-161-4/+4
| | | | | Signed-off-by: Thomas Klute <thomas2.klute@uni-dortmund.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: unify scan and work mutexesJohannes Berg2010-08-165-43/+38
| | | | | | | | | | | | | Having both scan and work mutexes is not just a bit too fine grained, it also creates issues when there's code that needs both since they then need to be acquired in the right order, which can be hard to do. Therefore, use just a single mutex for both. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: make scan workqueue functions staticStanislaw Gruszka2010-08-163-16/+6
| | | | | | | | | We do not need export iwl_bg.*scan.*() functions just for initialize workqueue in other module. Making that functions static helps with iwl-scan.c code review a bit. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: don't check rates on PLCP error framesJohannes Berg2010-08-161-20/+29
| | | | | | | | | Frames that failed PLCP error checks are most likely microwave transmissions (well, maybe not ...) and don't have a proper rate detected, so ignore it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: better association request debuggingDan Williams2010-08-161-8/+29
| | | | | | | | | Bring back the comment about FW v5 status codes from the pre-cfg80211 driver, and let through status codes that aren't remapped by the firmware. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: better scan response debuggingDan Williams2010-08-161-4/+20
| | | | | | | Make it a bit easier to debug scan results in the future. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: add fastcc to debug print for channel changeLuis R. Rodriguez2010-08-161-2/+3
| | | | | | | This helps us debug channel changes better. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud