summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* libata: clean up SFF init messTejun Heo2007-05-1143-315/+313
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The intention of using port_mask in SFF init helpers was to eventually support exoctic configurations such as combination of legacy and native port on the same controller. This never became actually necessary and the related code always has been subtly broken one way or the other. Now that new init model is in place, there is no reason to make common helpers capable of handling all corner cases. Exotic cases can simply dealt within LLDs as necessary. This patch removes port_mask handling in SFF init helpers. SFF init helpers don't take n_ports argument and interpret it into port_mask anymore. All information is carried via port_info. n_ports argument is dropped and always two ports are allocated. LLD can tell SFF to skip certain port by marking it dummy. Note that SFF code has been treating unuvailable ports this way for a long time until recent breakage fix from Linus and is consistent with how other drivers handle with unavailable ports. This fixes 1-port legacy host handling still broken after the recent native mode fix and simplifies SFF init logic. The following changes are made... * ata_pci_init_native_host() and ata_init_legacy_host() both now try to initialized whatever they can and mark failed ports dummy. They return 0 if any port is successfully initialized. * ata_pci_prepare_native_host() and ata_pci_init_one() now doesn't take n_ports argument. All info should be specified via port_info array. Always two ports are allocated. * ata_pci_init_bmdma() exported to be used by LLDs in exotic cases. * port_info handling in all LLDs are standardized - all port_info arrays are const stack variable named ppi. Unless the second port is different from the first, its port_info is specified as NULL (tells libata that it's identical to the last non-NULL port_info). * pata_hpt37x/hpt3x2n: don't modify static variable directly. Make an on-stack copy instead as ata_piix does. * pata_uli: It has 4 ports instead of 2. Don't use ata_pci_prepare_native_host(). Allocate the host explicitly and use init helpers. It's simple enough. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement libata.spindown_compatTejun Heo2007-05-114-1/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that libata uses sd->manage_start_stop, libata spins down disk on shutdown. In an attempt to compensate libata's previous shortcoming, some distros sync and spin down disks attached via libata in their shutdown(8). Some disks spin back up just to spin down again on STANDBYNOW1 if the command is issued when the disk is spun down, so this double spinning down causes problem. This patch implements module parameter libata.spindown_compat which, when set to one (default value), prevents libata from spinning down disks on shutdown thus avoiding double spinning down. Note that libata spins down disks for suspend to mem and disk, so with libata.spindown_compat set to one, disks should be properly spun down in all cases without modifying shutdown(8). shutdown(8) should be fixed eventually. Some drive do spin up on SYNCHRONZE_CACHE even when their cache is clean. Those disks currently spin up briefly when sd tries to shutdown the device and then the machine powers off immediately, which can't be good for the head. We can't skip SYNCHRONIZE_CACHE during shudown as it can be dangerous data integrity-wise. So, this spindown_compat parameter is already scheduled for removal by the end of the next year and here's what shutdown(8) should do. * Check whether /sys/modules/libata/parameters/spindown_compat exists. If it does, write 0 to it. * For each libata harddisk { * Check whether /sys/class/scsi_disk/h:c:i:l/manage_start_stop exists. Iff it doesn't, synchronize cache and spin the disk down as before. } The above procedure will make shutdown(8) work properly with kernels before this change, ones with this workaround and later ones without it. To accelerate shutdown(8) updates, if the compat mode is in use, this patch prints BIG FAT warning for five seconds during shutdown (the optimal interval to annoy the user just the right amount discovered by hours of tireless usability testing). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: reimplement suspend/resume support using sdev->manage_start_stopTejun Heo2007-05-1145-575/+14
| | | | | | | | | | | | | | | | | | | | | | | Reimplement suspend/resume support using sdev->manage_start_stop. * Device suspend/resume is now SCSI layer's responsibility and the code is simplified a lot. * DPM is dropped. This also simplifies code a lot. Suspend/resume status is port-wide now. * ata_scsi_device_suspend/resume() and ata_dev_ready() removed. * Resume now has to wait for disk to spin up before proceeding. I couldn't find easy way out as libata is in EH waiting for the disk to be ready and sd is waiting for EH to complete to issue START_STOP. * sdev->manage_start_stop is set to 1 in ata_scsi_slave_config(). This fixes spindown on shutdown and suspend-to-disk. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds2007-05-11169-5530/+10637
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (122 commits) [ALSA] version 1.0.14rc4 [ALSA] Add speaker pin sequencing to hda_codec.c:snd_hda_parse_pin_def_config() [ALSA] hda-codec - Add ALC861VD Lenovo support [ALSA] hda-codec - Fix connection list in generic parser [ALSA] usb-audio: work around wrong wMaxPacketSize on ESI M4U [ALSA] usb-audio: work around broken M-Audio MidiSport Uno firmware [ALSA] usb-audio: explicitly match Logitech QuickCam [ALSA] hda-codec - Fix a typo [ALSA] hda-codec - Fix ALC880 uniwill auto-mutes [ALSA] hda-codec - Fix AD1988 SPDIF playback route control [ALSA] wm8750 typo fix [ALSA] wavefront: only declare isapnp on CONFIG_PNP [ALSA] hda-codec - bug fixes for stac92xx HDA codecs. [ALSA] add MODULE_FIRMWARE entries [ALSA] do not depend on FW_LOADER when internal firmware images are used [ALSA] hda-codec - Fix resume of STAC92xx codecs [ALSA] usbaudio - Revert the minimal period size fix patch [ALSA] hda-codec - Add support for new HP DV series laptops [ALSA] usb-audio - Fix the minimum period size per transfer mode [ALSA] sound/pcmcia/vx/vxpocket.c: fix an if() condition ...
| * [ALSA] version 1.0.14rc4Jaroslav Kysela2007-05-111-2/+2
| | | | | | | | Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] Add speaker pin sequencing to hda_codec.c:snd_hda_parse_pin_def_config()Steve Longerbeam2007-05-111-37/+69
| | | | | | | | | | | | | | | | | | | | | | | | Some verb tables (such as an Asus VT sent by IDT) contain only speaker outs in the default pin configs, and no line-outs. In such a case the speaker sequence numbers have to be used to order the speaker out pins, just as is being done for line-out pins. Then, when speaker-outs are copied to line-outs, the line-outs will be ordered properly. Signed-off-by: Steve Longerbeam <stevel@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Add ALC861VD Lenovo supportKailang Yang2007-05-112-5/+161
| | | | | | | | | | | | | | | | | | - Added ALC861VD Lenovo support (17aa:3802, 17aa:2066) - Modify alc_subsystem_id Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Fix connection list in generic parserTakashi Iwai2007-05-111-1/+1
| | | | | | | | | | | | | | Fix the retrival of widget connection list in the generic parser. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] usb-audio: work around wrong wMaxPacketSize on ESI M4UClemens Ladisch2007-05-111-1/+5
| | | | | | | | | | | | | | | | Add a workaround for the ESI M4U that claims to support 32-byte packets but ignores the remaining bytes of packets bigger than four bytes. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] usb-audio: work around broken M-Audio MidiSport Uno firmwareClemens Ladisch2007-05-111-1/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The firmware of the M-Audio USB Uno MIDI Interface has, at least in hardware revision 1.25, a bug that garbles its USB output. When it receives a Note On MIDI message that uses running status, the resulting USB MIDI packet has a wrong CIN (4 instead of 9) and a wrong length (2 bytes, the status byte is still missing). This patch adds a workaround to track the CINs and the MIDI messages of received USB MIDI packets to detect whether a packet with CIN 4 is a correct SysEx packet or a buggy running status packet. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] usb-audio: explicitly match Logitech QuickCamDaniel Drake2007-05-111-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 93c8bf45e083b89dffe3a708363c15c1b220c723 modified the USB device matching behaviour to ignore interface class matches if the device class is vendor-specific. This patch adds explicit ID matches for Logitech QuickCam devices, which have a vendor specific device class (but standards-compliant audio interfaces). This fixes a 2.6.20 regression where the audio component of these devices was no longer usable. http://bugs.gentoo.org/show_bug.cgi?id=175715 https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/93822 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3040 Based on a patch from sergiom Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Fix a typoTakashi Iwai2007-05-111-1/+1
| | | | | | | | | | | | | | | | The AMP mute bit is bit 7. No real influence since no one uses this definition yet, though... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Fix ALC880 uniwill auto-mutesTakashi Iwai2007-05-111-6/+27
| | | | | | | | | | | | | | | | | | Fix the auto-mute controls of ALC880 uniwill model. Split to two individual functions to handle HP and front-mic mutes. For front-mic mute, use snd_hda_codec_amp_update() to be consistent with mixer. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Fix AD1988 SPDIF playback route controlTakashi Iwai2007-05-111-13/+18
| | | | | | | | | | | | | | Fix AD1988 SPDIF playback route control for selecting ADC1-3. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] wm8750 typo fixAndrew Morton2007-05-111-1/+1
| | | | | | | | | | | | | | | | I quuestion the testing status of that patch! Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] wavefront: only declare isapnp on CONFIG_PNPDavid Rientjes2007-05-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | From: David Rientjes <rientjes@google.com> isapnp[] is only used for CONFIG_PNP. If this configuration option is not set, do not declare the array. Cc: Adam Belay <ambx1@neo.rr.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - bug fixes for stac92xx HDA codecs.Steve Longerbeam2007-05-111-34/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * fixed surround playback on stac922x. Pin direction control bits were not being set correctly in stac92xx_set_pinctl(). Specifically it would refuse to set the port as an output if the port was already configured as an input. Last hunk (#8). * fixed an input mux bug on 92xx codecs. When there is more than one possible input calculated for the muxes, the actual mux widget never gets set from its reset default, which is index 0, in the stac9221 case that is port E. So alsamixer/amixer/gnome-mixer report the Mic as being the selected input source, but in fact is something else (line-in port E in stac9221 case). Another problem with this is that if you actually try to set the mux input to 'Mic', nothing happens because *cur_val == idx (see snd_hda_input_mux_put). You have to actually toggle input source to line-in then back to mic to actually set the mux widget. Hunk #7. * fixed some typos in patch_sigmatel.c. Hunk #6. * fix to stac92xx_add_dyn_out_pins() that fixes surround playback on codecs with less that 4 DACs (stac9205 for example). It reads the widget caps cache created by hda_codec to count the total number of analog DACs found. It then uses that to determine whether there will be enough independent DACs available for line/mic switch controls. Hunk #1, #2, and #3. * improvements to stac92xx_auto_fill_dac_nids() to make it more general. This fixes surround playback on some codecs in combination with the fix to stac92xx_add_dyn_out_pins() above. It reads the full connection list now, instead of just the first entry, and then locates an analog DAC in the list. If one is found and it's free, assign it to that line-out. If no free DAC is found for the line-out, return -ENODEV. It also makes sure to actually select the chosen DAC if more than one DAC is input to the pin. Hunks #4, #5. Signed-off-by: Steve Longerbeam <stevel@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] add MODULE_FIRMWARE entriesClemens Ladisch2007-05-1123-5/+109
| | | | | | | | | | | | | | Add MODULE_FIRMWARE() entries, where appropriate. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] do not depend on FW_LOADER when internal firmware images are usedClemens Ladisch2007-05-112-5/+5
| | | | | | | | | | | | | | | | | | Since request_firmware() is no longer used when the internal firmware images are used, it is no longer necessary to depend on FW_LOADER in this case. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Fix resume of STAC92xx codecsTakashi Iwai2007-05-111-0/+1
| | | | | | | | | | | | | | Added a missing call to resume mixer controls for STAC92xx codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] usbaudio - Revert the minimal period size fix patchTakashi Iwai2007-05-111-3/+4
| | | | | | | | | | | | | | | | | | | | The last patch didn't really work (false report). Although the hardware supports 125us minimum period, the current usb-audio driver code assumes the 1ms period in many places. Rollback the change. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Add support for new HP DV series laptopsTobin Davis2007-05-111-0/+3
| | | | | | | | | | | | | | | | | | This patch adds support for 3 new HP laptops to the Conexant 'Venice' driver. Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] usb-audio - Fix the minimum period size per transfer modeTakashi Iwai2007-05-111-1/+3
| | | | | | | | | | | | | | | | The minimal period size is 125us for high-speed mode while 1ms for full-speed mode. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] sound/pcmcia/vx/vxpocket.c: fix an if() conditionAdrian Bunk2007-05-111-1/+1
| | | | | | | | | | | | | | | | It seems noone ever tried to use this driver with more than one device. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] snd-emu10k1: Prevent E-Mu 1010 Notebook card from hanging PC.James Courtier-Dutton2007-05-111-0/+9
| | | | | | | | | | | | | | E-Mu 1010 is not currently supported yet. Needs development work. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] Add description of imac-intel modelTakashi Iwai2007-05-111-0/+1
| | | | | | | | | | | | | | Added the description of missing imac-intel model for hda-intel driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] snd_hda_intel: fix for intel imacSylvain FORET2007-05-111-0/+12
| | | | | | | | | | | | | | | | | | Add handling of Intel-iMac-specific pinconfig of the sound card. Intel-iMac now handled as a separated subsystem. Signed-off-by: Sylvain FORET <sylvain.foret@anu.edu.au> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-intel - Add ATI RS780,R600 HDMI audio supportWolke Liu2007-05-112-1/+6
| | | | | | | | | | | | | | | | This patch is for ATI RS780 and R600 HDMI support. Signed-off-by: Wolke Liu <wolke.liu@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Prefer audio codec name as the mixer nameTakashi Iwai2007-05-111-1/+2
| | | | | | | | | | | | | | | | Prefer the name of audio codecs as the mixer name even if modem codecs are probed before the audio codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] Don't use request_firmware if internal firmwares are definedTakashi Iwai2007-05-115-64/+62
| | | | | | | | | | | | | | | | | | Don't use request_firmware() if the internal firmwares are defined via Kconfig. Otherwise it results in a significant delay at loading time (minutes). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Fix model for ASUS A9rpTakashi Iwai2007-05-111-0/+1
| | | | | | | | | | | | | | Fixed the model (asus-laptop) for ASUS A9rp with ALC660 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] HDA-Intel: Fix headphone squeal on Conexant audioTobin Davis2007-05-111-17/+6
| | | | | | | | | | | | | | | | | | This patch fixes the headphone squeal and noise on Conexant CX20551 (Waikiki) audio. Signed-off-by: Tobin Davis <gruemaster@email.uophx.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] ice1724 - Misc fixes for Prodigy192Pavel Hofman2007-05-112-1/+16
| | | | | | | | | | | | | | | | | | - always set 256fs in SPDIF master clock mode - disable deemphasis filter in AK4114 for Prodigy192 Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-intel - Fix detection of audio codec on Toshiba A100Takashi Iwai2007-05-111-4/+7
| | | | | | | | | | | | | | | | | | | | | | Some boards have the audio codec on slot #3 while the modem codec on slot #0. The driver should continue to probe the slots when no audio codec is found. This fixes the problem of no device on Toshiba A100 (and some other ATI SB450 devices). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Fix output pin types in auto configurationTakashi Iwai2007-05-111-9/+25
| | | | | | | | | | | | | | | | Use PIN_HP output type for HP pin widgets accordingly, instead of always applying PIN_OUT. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Add line_out_type to auto_pin_cfg structTakashi Iwai2007-05-112-0/+9
| | | | | | | | | | | | | | | | Added line_out_type field to auto_pin_cfg struct to provide the pin type of default line_outs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Add support for Asus A8JN LaptopTobin Davis2007-05-111-0/+1
| | | | | | | | | | | | | | | | | | This patch adds support for the Asus A8JN Laptop. Other modes were tested, this one worked best. Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] sound: fix incorrect use of platform_device_register()Akinobu Mita2007-05-112-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The platform_device allocated by platform_device_alloc() should be added to the device hierarchy by platform_device_add() instead of platform_device_register(). Otherwise it will hit WARN_ON() in platform_device_register(). by illegal refcount. This patch fixes such incorrect usages in portman2x4 and mts64 drivers. Also it removes unnecessary trailing whitespaces. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Fix 8-channel auto-configurationTakashi Iwai2007-05-111-7/+2
| | | | | | | | | | | | | | | | Fix the auto-configuration of 8-channel devices. The sequence numbers of usual 7.1 outputs are: 0/1/2/4 = Front/CLFE/Rear/Side Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] intel8x0 - Fix Oops in crash kernelTakashi Iwai2007-05-111-10/+10
| | | | | | | | | | | | | | | | | | | | | | When intel8x0 driver is loaded in the crash kernel, it gets Oops occasionally. This is because the irq handler gets called before the proper hardware initialization. Now defer it after snd_intel8x0_chip_init(). (reference: http://lkml.org/lkml/2007/3/5/252) Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] sound: SPIN_LOCK_UNLOCKED cleanupMilind Arun Choudhary2007-05-111-3/+3
| | | | | | | | | | | | | | | | SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Add support for Gigabyte S-Series GA-M57SLI-S4 motherboardTobin Davis2007-05-111-0/+1
| | | | | | | | | | | | | | | | | | Added the support for Gigabyte S-Series GA-M57SLI-S4 motherboard (model=6stack-dig). Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Fix surround output on AD1986ATakashi Iwai2007-05-111-24/+16
| | | | | | | | | | | | | | | | | | | | Fix surround output on AD1986A codec 3stack model. The following bugs are fixed: - init verbs for 3stack disabled the shared surround outputs - a channel mode change resulted in the mute of surrounds Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] ASoC Kconfig descriptionLiam Girdwood2007-05-111-6/+8
| | | | | | | | | | | | | | | | This patch makes the ASoC Kconfig descriptions a little more meaningful. Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] ASoC Samsung S3C24xx updates - i2sGraeme Gregory2007-05-112-2/+6
| | | | | | | | | | | | | | | | | | | | This patch adds DMA size fields to the S3C24xx audio DMA params and exports the S3C24xx I2S digital audio interface. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] ASoC Samsung S3c24xx updates - audio DMA cleanupGraeme Gregory2007-05-112-22/+27
| | | | | | | | | | | | | | | | | | This patch cleans up the audio DMA for the Samsung S3C24xx platform. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] hda-codec - Add first generation macbook subsystem IDAbhijit Bhopatkar2007-05-111-0/+3
| | | | | | | | | | | | | | | | | | | | First generation MacBooks were getting ignored by sigmatel drivers and wrongly being identified as MACMINI. This patch makes them identify as MACBOOK. Signed-off-by: Abhijit Bhopatkar <bainonline@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] ASoC export AC97 DAIGraeme Gregory2007-05-112-0/+2
| | | | | | | | | | | | | | | | | | | | This patch exports the ASoC AC97 Digital Audio Interface as a GPL'ed symbol. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] ASoC WM8753 codec - build changesLiam Girdwood2007-05-112-0/+6
| | | | | | | | | | | | | | | | This patch adds the WM8753 codec driver to the kernel build system. Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
| * [ALSA] SoC WM8753 codec supportLiam Girdwood2007-05-113-0/+1938
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch series adds support for the WM8753 codec as found on the OpenMoko Neo 1973 (other Neo 1973 and Samsung S3C24xx patches to follow today) as well other new devices. Features:- o HiFi and Voice DAI supported (inc runtime switching of DAI mode) o DAPM o All mixers o PLL calculator o 16,20 and 24bit samples. o WM8753 I2C ID added to include/linux/i2c-id.h From: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Seth Forshee <seth.forshee@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
OpenPOWER on IntegriCloud