summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* USB: omninet: fix port-data memory leakJohan Hovold2012-10-251-18/+18
| | | | | | | | | | | | | | | Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: fix port-data memory leakJohan Hovold2012-10-251-30/+32
| | | | | | | | | | | | | | | | | | Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that this patch also fixes a second port-data memory leak in the error path of attach, should parallel-port initialisation fail. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: digi_acceleport: fix port-data memory leakJohan Hovold2012-10-251-50/+67
| | | | | | | | | | | | | | | | | | | | Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the oob port is never registered as a port device and should thus be handled in attach and release. Compile-only tested. Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ch341: fix port-data memory leakJohan Hovold2012-10-251-7/+16
| | | | | | | | | | | | | | Fix port-data memory leak by moving port data allocation to port_probe and actually implementing deallocation. Note that this driver has never even bothered to try to deallocate it's port data... Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: whiteheat: fix port-data memory leakJohan Hovold2012-10-251-33/+26
| | | | | | | | | | | | | | | | | | | Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the fifth port (command port) is never registered as a port device and thus should be handled in attach and release. Compile-only tested. Cc: <support@connecttech.com> Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: whiteheat: fix memory leak in error pathJohan Hovold2012-10-251-0/+1
| | | | | | | | | Make sure command buffer is deallocated in case of errors during attach. Cc: <support@connecttech.com> Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: metro-usb: fix io after disconnectJohan Hovold2012-10-251-9/+6
| | | | | | | | | Make sure no control urb is submitted during close after a disconnect by checking the disconnected flag. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: metro-usb: fix port-data memory leakJohan Hovold2012-10-251-37/+13
| | | | | | | | | | | | | | | | | Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the call to metrousb_clean (close) in shutdown was redundant. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-storage: add unusual_devs entry for Casio EX-N1 digital cameraMichael Shigorin2012-10-241-0/+6
| | | | | | | | | | | | | | This commit sets removable subclass for Casio EX-N1 digital camera. The patch has been tested within an ALT Linux kernel: http://git.altlinux.org/people/led/packages/?p=kernel-image-3.0.git;a=commitdiff;h=c0fd891836e89fe0c93a4d536a59216d90e4e3e7 See also https://bugzilla.kernel.org/show_bug.cgi?id=49221 Signed-off-by: Oleksandr Chumachenko <ledest@gmail.com> Signed-off-by: Michael Shigorin <mike@osdn.org.ua> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: Fix memory leak in sierra_release()Lennart Sorensen2012-10-241-0/+1
| | | | | | | | | | I found a memory leak in sierra_release() (well sierra_probe() I guess) that looses 8 bytes each time the driver releases a device. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Acked-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb hub: use flush_work instead of flush_work_syncOctavian Purdila2012-10-231-1/+1
| | | | | | | | | | | | flush_work_sync and flush_work are now the same and flush_work_sync has been deprecated. This fixes the following warning: drivers/usb/core/hub.c: In function hub_quiesce: drivers/usb/core/hub.c:1216:3: warning: flush_work_sync is deprecated (declared at include/linux/workqueue.h:448) [-Wdeprecated-declarations] Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Add missing license tag to ezusb driver.Dave Jones2012-10-231-0/+1
| | | | | | | ezusb: module license 'unspecified' taints kernel Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'for-usb-linus-2012-10-23' of ↵Greg Kroah-Hartman2012-10-232-5/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus xHCI fixes for 3.7-rc3 Hi Greg, Here's four bug fixes for 3.7. The first patch fixes a potential deadlock in the USB port power off code, and the last two patches fix bugs in the USB 3.0 Link PM patchset. The second one is trivial and removes an unnecessary cast. Sarah Sharp
| * xhci: fix integer overflowOliver Neukum2012-10-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | xhci_service_interval_to_ns() returns long long to avoid an overflow. However, the type cast happens too late. The fix is to force ULL from the beginning. This patch should be backported to kernels as old as 3.5, that contain the commit e3567d2c15a7a8e2f992a5f7c7683453ca406d82 "xhci: Add Intel U1/U2 timeout policy." Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: stable@vger.kernel.org
| * xhci: endianness xhci_calculate_intel_u2_timeoutOliver Neukum2012-10-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | An le16 is accessed without conversion. This patch should be backported to kernels as old as 3.5, that contain the commit e3567d2c15a7a8e2f992a5f7c7683453ca406d82 "xhci: Add Intel U1/U2 timeout policy." Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: stable@vger.kernel.org
| * usb/xhci: Remove (__force__ __u16) before assigning DeviceRemovable and ↵Lan Tianyu2012-10-221-3/+2
| | | | | | | | | | | | | | | | | | | | assign directly. Struct usb_hub_descriptor.ss.DeviceRemovable has been defined as __le16 and (__force__ __u16) doesn't need. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * usb/xhci: release xhci->lock during turning on/off usb port's acpi power ↵Lan Tianyu2012-10-221-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | resource and checking the existence of port's power resource When setting usb port's acpi power resource, there will be some xhci hub requests. This will cause dead lock since xhci->lock has been held before setting acpi power resource in the xhci_hub_control(). The usb_acpi_power_manageable() function might fall into sleep so release xhci->lock before invoking it. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | Merge tag 'fixes-for-v3.7-rc3' of ↵Greg Kroah-Hartman2012-10-234-5/+13
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus usb: fixes for v3.7-rc3 Here's a new set of fixes for v3.7-rc3. It's quite small, only four patches. There's one bug fix for the newly added musb-dsps glue layer where we could be overflowing a buffer when creating the instance name. NET2272 got a fix for a case where the lock would be left held when exiting the IRQ handler with error in case of Spurious IRQs. Renensas USBHS got a DMA stall fix which would cause transfers to stall forever and a NULL pointer deref fix in case of pipe detach.
| * usb: renesas_usbhs: fixup dma transfer stallKuninori Morimoto2012-10-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | renesas_usbhs driver can switch DMA/PIO transfer by using handler, and each handler have push/pop direction. But unfortunately, current dma push handler didn't a path which calls usbhs_pipe_enable(). Thus, dma transfer never happened. this patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: renesas_usbhs: fixup: avoid NULL access on error case pipe detachKuninori Morimoto2012-10-231-0/+5
| | | | | | | | | | | | | | | | | | | | If renesas_usbhs or DMAEngine interrupt didn't happen by a certain cause, urb->ep will be NULL by usb time out. Then, host mode will access to it and crash kernel. This patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: gadget: net2272: fix missing unlock on error in net2272_irq()Wei Yongjun2012-10-231-1/+3
| | | | | | | | | | | | | | | | Add the missing unlock on the error handle path in function net2272_irq(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: dsps: fix res_name lengthDaniel Mack2012-10-231-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The res_name is used for the name construction of a DT property as follows: sprintf(res_name, "port%d-mode", id); Hence, res_name must be at least 11 characters long in order to store the name including the terminating '\0'. While at it, use to snprintf() rather than sprintf() when accessing this buffer. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb hub: send clear_tt_buffer_complete events when canceling TT clear workOctavian Purdila2012-10-221-2/+5
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a race condition in the USB hub code with regard to handling TT clear requests that can get the HCD driver in a deadlock. Usually when an TT clear request is scheduled it will be executed immediately: <7>[ 6.077583] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us] <3>[ 6.078041] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82 <7>[ 6.078299] hub_tt_work:731 <7>[ 9.309089] usb 2-1.5: link qh1-0e01/f4d506c0 start 0 [1/2 us] <7>[ 9.324526] ehci_hcd 0000:00:1d.0: reused qh f4d4db00 schedule <7>[ 9.324539] usb 2-1.3: link qh1-0e01/f4d4db00 start 0 [1/2 us] <7>[ 9.341530] usb 1-1.1: link qh4-0e01/f397aec0 start 2 [1/2 us] <7>[ 10.116159] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us] <3>[ 10.116459] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82 <7>[ 10.116537] hub_tt_work:731 However, if a suspend operation is triggered before hub_tt_work is scheduled, hub_quiesce will cancel the work without notifying the HCD driver: <3>[ 35.033941] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d80 <5>[ 35.034022] sd 0:0:0:0: [sda] Stopping disk <7>[ 35.034039] hub 2-1:1.0: hub_suspend <7>[ 35.034067] usb 2-1: unlink qh256-0001/f3b1ab00 start 1 [1/0 us] <7>[ 35.035085] hub 1-0:1.0: hub_suspend <7>[ 35.035102] usb usb1: bus suspend, wakeup 0 <7>[ 35.035106] ehci_hcd 0000:00:1a.0: suspend root hub <7>[ 35.035298] hub 2-0:1.0: hub_suspend <7>[ 35.035313] usb usb2: bus suspend, wakeup 0 <7>[ 35.035315] ehci_hcd 0000:00:1d.0: suspend root hub <6>[ 35.250017] PM: suspend of devices complete after 216.979 msecs <6>[ 35.250822] PM: late suspend of devices complete after 0.799 msecs <7>[ 35.252343] ehci_hcd 0000:00:1d.0: wakeup: 1 <7>[ 35.262923] ehci_hcd 0000:00:1d.0: --> PCI D3hot <7>[ 35.263302] ehci_hcd 0000:00:1a.0: wakeup: 1 <7>[ 35.273912] ehci_hcd 0000:00:1a.0: --> PCI D3hot <6>[ 35.274254] PM: noirq suspend of devices complete after 23.442 msecs <6>[ 35.274975] ACPI: Preparing to enter system sleep state S3 <6>[ 35.292666] PM: Saving platform NVS memory <7>[ 35.295030] Disabling non-boot CPUs ... <6>[ 35.297351] CPU 1 is now offline <6>[ 35.300345] CPU 2 is now offline <6>[ 35.303929] CPU 3 is now offline <7>[ 35.303931] lockdep: fixing up alternatives. <6>[ 35.304825] Extended CMOS year: 2000 When the device will resume the EHCI driver will get stuck in ehci_endpoint_disable waiting for the tt_clearing flag to reset: <0>[ 47.610967] usb 2-1.3: **** DPM device timeout **** <7>[ 47.610972] f2f11c60 00000092 f2f11c0c c10624a5 00000003 f4c6e880 c1c8a4c0 c1c8a4c0 <7>[ 47.610983] 15c55698 0000000b f56b34c0 f2a45b70 f4c6e880 00000082 f2a4602c f2f11c30 <7>[ 47.610993] c10787f8 f4cac000 f2a45b70 00000000 f4cac010 f2f11c58 00000046 00000001 <7>[ 47.611004] Call Trace: <7>[ 47.611006] [<c10624a5>] ? sched_clock_cpu+0xf5/0x160 <7>[ 47.611019] [<c10787f8>] ? lock_release_holdtime.part.22+0x88/0xf0 <7>[ 47.611026] [<c103ed46>] ? lock_timer_base.isra.35+0x26/0x50 <7>[ 47.611034] [<c17592d3>] ? schedule_timeout+0x133/0x290 <7>[ 47.611044] [<c175b43e>] schedule+0x1e/0x50 <7>[ 47.611051] [<c17592d8>] schedule_timeout+0x138/0x290 <7>[ 47.611057] [<c10624a5>] ? sched_clock_cpu+0xf5/0x160 <7>[ 47.611063] [<c103e560>] ? usleep_range+0x40/0x40 <7>[ 47.611070] [<c1759445>] schedule_timeout_uninterruptible+0x15/0x20 <7>[ 47.611077] [<c14935f4>] ehci_endpoint_disable+0x64/0x160 <7>[ 47.611084] [<c147d1ee>] ? usb_hcd_flush_endpoint+0x10e/0x1d0 <7>[ 47.611092] [<c1165663>] ? sysfs_add_file+0x13/0x20 <7>[ 47.611100] [<c147d5a9>] usb_hcd_disable_endpoint+0x29/0x40 <7>[ 47.611107] [<c147fafc>] usb_disable_endpoint+0x5c/0x80 <7>[ 47.611111] [<c147fb57>] usb_disable_interface+0x37/0x50 <7>[ 47.611116] [<c1477650>] usb_reset_and_verify_device+0x4b0/0x640 <7>[ 47.611122] [<c1474665>] ? hub_port_status+0xb5/0x100 <7>[ 47.611129] [<c147a975>] usb_port_resume+0xd5/0x220 <7>[ 47.611136] [<c148877f>] generic_resume+0xf/0x30 <7>[ 47.611142] [<c14821a3>] usb_resume+0x133/0x180 <7>[ 47.611147] [<c1473b10>] ? usb_dev_thaw+0x10/0x10 <7>[ 47.611152] [<c1473b1d>] usb_dev_resume+0xd/0x10 <7>[ 47.611157] [<c13baa60>] dpm_run_callback+0x40/0xb0 <7>[ 47.611164] [<c13bdb03>] ? pm_runtime_enable+0x43/0x70 <7>[ 47.611171] [<c13bafc6>] device_resume+0x1a6/0x2c0 <7>[ 47.611177] [<c13ba940>] ? dpm_show_time+0xe0/0xe0 <7>[ 47.611183] [<c13bb0f9>] async_resume+0x19/0x40 <7>[ 47.611189] [<c10580c4>] async_run_entry_fn+0x64/0x160 <7>[ 47.611196] [<c104a244>] ? process_one_work+0x104/0x480 <7>[ 47.611203] [<c104a24c>] ? process_one_work+0x10c/0x480 <7>[ 47.611209] [<c104a2c0>] process_one_work+0x180/0x480 <7>[ 47.611215] [<c104a244>] ? process_one_work+0x104/0x480 <7>[ 47.611220] [<c1058060>] ? async_schedule+0x10/0x10 <7>[ 47.611226] [<c104c15c>] worker_thread+0x11c/0x2f0 <7>[ 47.611233] [<c104c040>] ? manage_workers.isra.27+0x1f0/0x1f0 <7>[ 47.611239] [<c10507f8>] kthread+0x78/0x80 <7>[ 47.611244] [<c1750000>] ? timer_cpu_notify+0xd6/0x20d <7>[ 47.611253] [<c1050780>] ? __init_kthread_worker+0x60/0x60 <7>[ 47.611258] [<c176357e>] kernel_thread_helper+0x6/0xd <7>[ 47.611283] ------------[ cut here ]------------ This patch changes hub_quiesce behavior to flush the TT clear work instead of canceling it, to make sure that no TT clear request remains uncompleted before suspend. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Linux 3.7-rc2v3.7-rc2Linus Torvalds2012-10-201-1/+1
|
* Merge tag 'arm64-fixes' of ↵Linus Torvalds2012-10-209-45/+83
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: "Main changes: - AArch64 Linux compilation fixes following 3.7-rc1 changes (MODULES_USE_ELF_RELA, update_vsyscall() prototype) - Unnecessary register setting in start_thread() (thanks to Al Viro) - ptrace fixes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: fix alignment padding in assembly code arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpoints arm64: ptrace: make structure padding explicit for debug registers arm64: No need to set the x0-x2 registers in start_thread() arm64: Ignore memory blocks below PHYS_OFFSET arm64: Fix the update_vsyscall() prototype arm64: Select MODULES_USE_ELF_RELA arm64: Remove duplicate inclusion of mmu_context.h in smp.c
| * arm64: fix alignment padding in assembly codeMarc Zyngier2012-10-202-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An interesting effect of using the generic version of linkage.h is that the padding is defined in terms of x86 NOPs, which can have even more interesting effects when the assembly code looks like this: ENTRY(func1) mov x0, xzr ENDPROC(func1) // fall through ENTRY(func2) mov x0, #1 ret ENDPROC(func2) Admittedly, the code is not very nice. But having code from another architecture doesn't look completely sane either. The fix is to add arm64's version of linkage.h, which causes the insertion of proper AArch64 NOPs. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpointsWill Deacon2012-10-181-16/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If a debugger tries to zero a hardware debug control register, the kernel will try to infer both the type and length of the breakpoint in order to sanity-check against the requested regset type. This will fail because the encoding will appear as a zero-length breakpoint. This patch changes the control register setting so that disabled breakpoints are treated as HW_BREAKPOINT_EMPTY and no further sanity-checking is required. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: ptrace: make structure padding explicit for debug registersWill Deacon2012-10-182-7/+32
| | | | | | | | | | | | | | | | | | | | | | | | The user_hwdebug_state structure contains implicit padding to conform to the alignment requirements of the AArch64 ABI (namely that aggregates must be aligned to their most aligned member). This patch fixes the ptrace functions operating on struct user_hwdebug_state so that the padding is handled correctly. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: No need to set the x0-x2 registers in start_thread()Catalin Marinas2012-10-181-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For historical reasons, ARM used to set r0-r2 in start_thread() to the first values on the user stack when starting a new user application. The same logic has been inherited in AArch64. The x0 register is overridden by the sys_execve() return value so it's always zero on success. The x1 and x2 registers are ignored by AArch64 and EABI AArch32 applications, so we can safely remove the register setting for both native and compat user space. This also fixes a potential fault with the kernel accessing user space stack directly. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Al Viro <viro@zeniv.linux.org.uk>
| * arm64: Ignore memory blocks below PHYS_OFFSETCatalin Marinas2012-10-181-0/+12
| | | | | | | | | | | | | | | | | | | | According to Documentation/arm64/booting.txt, the kernel image must be loaded at a pre-defined offset from the start of RAM so that the kernel can calculate PHYS_OFFSET based on this address. If the DT contains memory blocks below this PHYS_OFFSET, report them and ignore the corresponding memory range. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: Fix the update_vsyscall() prototypeCatalin Marinas2012-10-181-10/+10
| | | | | | | | | | | | | | | | | | | | With commit 576094b7 (time: Introduce new GENERIC_TIME_VSYSCALL) the old update_vsyscall() prototype is no longer available. This patch updates the arm64 port. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: John Stultz <john.stultz@linaro.org>
| * arm64: Select MODULES_USE_ELF_RELACatalin Marinas2012-10-181-0/+1
| | | | | | | | | | | | | | | | | | With commit 786d35d4 (make most arch asm/module.h files use asm-generic/module.h) arm64 needs to enable MODULES_USE_ELF_RELA for loadable modules. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com>
| * arm64: Remove duplicate inclusion of mmu_context.h in smp.cSachin Kamat2012-10-161-1/+0
| | | | | | | | | | | | | | asm/mmu_context.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* | use clamp_t in UNAME26 fixKees Cook2012-10-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The min/max call needed to have explicit types on some architectures (e.g. mn10300). Use clamp_t instead to avoid the warning: kernel/sys.c: In function 'override_release': kernel/sys.c:1287:10: warning: comparison of distinct pointer types lacks a cast [enabled by default] Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2012-10-199-17/+56
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Assorted small fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf python: Properly link with libtraceevent perf hists browser: Add back callchain folding symbol perf tools: Fix build on sparc. perf python: Link with libtraceevent perf python: Initialize 'page_size' variable tools lib traceevent: Fix missed freeing of subargs in free_arg() in filter lib tools traceevent: Add back pevent assignment in __pevent_parse_format() perf hists browser: Fix off-by-two bug on the first column perf tools: Remove warnings on JIT samples for srcline sort key perf tools: Fix segfault when using srcline sort key perf: Require exclude_guest to use PEBS - kernel side enforcement perf tool: Precise mode requires exclude_guest
| * | perf python: Properly link with libtraceeventArnaldo Carvalho de Melo2012-10-203-14/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Namhyung Kim reported that the build fails with: GEN python/perf.so gcc: error: python_ext_build/tmp//../../libtraceevent.a: No such file or directory error: command 'gcc' failed with exit status 1 cp: cannot stat `python_ext_build/lib/perf.so': No such file or directory make: *** [python/perf.so] Error 1 We need to propagate the TE_PATH variable to the setup.py file. Reported-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/n/tip-8umiPbm4sxpknKivbjgykhut@git.kernel.org [ Fixed superfluous variable build error. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar2012-10-209-6/+44
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: * The python binding needs to link with libtraceevent and to initialize the 'page_size' variable so that mmaping works again. * The callchain folding character that appears on the TUI just before the overhead had disappeared due to recent changes, add it back. * Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. Kernel side enforcement fix by Peter Zijlstra, tooling side fix by David Ahern. * Fix build on sparc due to UAPI, fix from David Miller. * Fixes for the srclike sort key for unresolved symbols and when processing samples in JITted code, where we don't have an ELF file, just an special symbol table, fixes from Namhyung Kim. * Fix some leaks in libtraceevent, from Steven Rostedt. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * | perf hists browser: Add back callchain folding symbolArnaldo Carvalho de Melo2012-10-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 5395a04841fc ("perf hists: Separate overhead and baseline columns") makes the "Overhead" column no more the first one, this caused the test that checks if it is time to show if a histogram entry has callchains never hits. Fix it by checking if the 'i' variable is equal to PERF_HPP__OVERHEAD instead of 0. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-w3lcbx0fx1fnh3l2cbq40q2e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * | perf tools: Fix build on sparc.David Miller2012-10-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | More UAPI stuff. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20121017.010656.383828471689899431.davem@davemloft.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * | perf python: Link with libtraceeventArnaldo Carvalho de Melo2012-10-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The evsel methods to read tracepoint fields uses libtraceevent functions, becoming needed by the python binding as well. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-j3o4v7jyvp9ke9n230l96a1m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * | perf python: Initialize 'page_size' variableArnaldo Carvalho de Melo2012-10-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 0c1fe6b: 'perf tools: Have the page size value available for all tools' Broke the python binding because the global variable 'page_size' is initialized on the main() routine, that is not called when using just the python binding, causing evlist.mmap() to fail because it expects that variable to be initialized to the system's page size. Fix it by initializing it on the binding init routine. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-vrvp3azmbfzexnpmkhmvtzzc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * | tools lib traceevent: Fix missed freeing of subargs in free_arg() in filterSteven Rostedt2012-10-161-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of args were missed in free_args(), as well as subargs. That is args like FILTER_ARG_NUM have left and right pointers to other args that also need to be freed. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1349137408.22822.135.camel@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * | lib tools traceevent: Add back pevent assignment in __pevent_parse_format()Steven Rostedt2012-10-161-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even though with the change of commit commit 2b29175 "tools lib traceevent: Carve out events format parsing routine", allowed __pevent_parse_format() to parse an event without the need of a pevent handler, the event still needs to assign the pevent handed to it. There's no problem with assigning it if the pevent is NULL, as the event->pevent would be NULL without the assignment. But function parsing handlers may be assigned to the pevent handler to help in parsing the event. If there's no pevent then there would not be any function handlers, but if the pevent isn't assigned first before parsing the event, it wont honor the function handlers that were assigned. Worse yet, the current code crashes if an event has a function that it tries to parse. For example: # perf record -e scsi:scsi_dispatch_cmd_timeout Segmentation fault (core dumped) This happens because the scsi_dispatch_cmd_timeout event format has the following: scsi_trace_parse_cdb(p, __get_dynamic_array(cmnd), REC->cmd_len) which hasn't been defined by the pevent code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1349136831.22822.133.camel@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * | perf hists browser: Fix off-by-two bug on the first columnNamhyung Kim2012-10-161-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 5395a04841fc ("perf hists: Separate overhead and baseline columns") makes the "Overhead" column no more the first one. So it resulted in the mis-aligned column in the normal (non-diff) output. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/None Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * | perf tools: Remove warnings on JIT samples for srcline sort keyNamhyung Kim2012-10-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using the srcline sort key with perf report, I see many lines of warning related to JIT samples like below: addr2line: '/tmp/perf-1397.map': No such file Since it's not a ELF binary and doesn't provide such information, just use the raw ip address. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Irina Tirdea <irina.tirdea@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1350272383-7016-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * | perf tools: Fix segfault when using srcline sort keyNamhyung Kim2012-10-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The srcline sort key is for grouping samples based on their source file and line number. It use addr2line tool to get the information but it requires dso name. It caused a segfault when a sample does not have the name by dereferencing a NULL pointer. Fix it by using raw ip addresses for those samples. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1350272383-7016-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * | perf: Require exclude_guest to use PEBS - kernel side enforcementPeter Zijlstra2012-10-161-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. This patch enforces exclude_guest kernel side. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Avi Kivity <avi@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Robert Richter <robert.richter@amd.com> Link: http://lkml.kernel.org/r/1347569955-54626-3-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * | perf tool: Precise mode requires exclude_guestDavid Ahern2012-10-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary of events per Peter: "Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. AMB IBS does work but doesn't currently support exclude_* at all, setting an exclude_* bit will make it fail." This patch handles userspace perf command, setting the exclude_guest attribute if precise mode is requested, but only if a user has not specified a request for guest or host only profiling (G or H attribute). Kernel side AMD currently ignores all exclude_* bits, so there is no impact to existing IBS code paths. Robert Richter has a patch where IBS code will return EINVAL if an exclude_* bit is set. When this goes in it means use of :p on AMD with IBS will first fail with EINVAL (because exclude_guest will be set). Then the existing fallback code within perf will unset exclude_guest and try again. The second attempt will succeed if the CPU supports IBS profiling. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Robert Richter <robert.richter@amd.com> Tested-by: Robert Richter <robert.richter@amd.com> Reviewed-by: Robert Richter <robert.richter@amd.com> Cc: Avi Kivity <avi@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Link: http://lkml.kernel.org/r/1347569955-54626-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* | | | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2012-10-1932-75/+133
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc fixes from Olof Johansson: "A set of fixes and some minor cleanups for -rc2: - A series from Arnd that fixes warnings in drivers and other code included by ARM defconfigs. Most have been acked by corresponding maintainers (and seem quite hard to argue not picking up anyway in the few exception cases). - A few misc patches from the list for integrator/vt8500/i.MX - A batch of fixes to OMAP platforms, fixing: - boot problems on beaglebone, - regression fixes for local timers - clockdomain locking fixes - a few boot/sparse warnings - For Tegra: - Clock rate calculation overflow fix - Revert a change that removed timer clocks and a fix for symbol name clashes - For Renesas: - IO accessor / annotation cleanups to remove warnings - For Kirkwood/Dove/mvebu: - Fixes for device trees for Dove (some minor cleanups, some fixes) - Fixes for the mvebu gpio driver - Fix build problem for Feroceon due to missing ifdefs - Fix lsxl DTS files" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: kirkwood: fix buttons on lsxl boards ARM: kirkwood: fix LEDs names for lsxl boards ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2 gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_type ARM: dove: Add crypto engine to DT ARM: dove: Remove watchdog from DT ARM: dove: Restructure SoC device tree descriptor ARM: dove: Fix clock names of sata and gbe ARM: dove: Fix tauros2 device tree init ARM: dove: Add pcie clock support ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable ARM: s3c: mark s3c2440_clk_add as __init_refok spi/s3c64xx: use correct dma_transfer_direction type ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck ARM: OMAP: resolve sparse warning concerning debug_card_init() ARM: OMAP4: Fix twd_local_timer_register regression ARM: tegra: add tegra_timer clock ARM: tegra: rename tegra system timer ...
| * \ \ \ Merge tag 'kirkwood_fixes_for_v3.7' of ↵Olof Johansson2012-10-193-12/+12
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: - improve #ifdef logic to prevent linker errors with CACHE_FEROCEON_L2 - lsxl board dts fixes * tag 'kirkwood_fixes_for_v3.7' of git://git.infradead.org/users/jcooper/linux: ARM: kirkwood: fix buttons on lsxl boards ARM: kirkwood: fix LEDs names for lsxl boards ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2
OpenPOWER on IntegriCloud