summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] initio: bugfix for accessors patchBoaz Harrosh2007-12-181-0/+1
| | | | | | | | | | patch: [SCSI] initio: convert to use the data buffer accessors had a small but fatal bug in that it didn't increment the pointer into the initio scatterlist descriptors as it looped over the block generated ones. Fixed here. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] st: fix kernel BUG at include/linux/scatterlist.h:59!FUJITA Tomonori2007-12-181-0/+1
| | | | | | | | | This is caused by a missing scatterlist initialisation (it only shows up when sg list handling debugging is turned on). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Kai Makisara <Kai.Makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] initio: fix conflict when loading driverAlan Cox2007-12-181-0/+1
| | | | | | | | | | | | | | | | | | > I have a scanner connected to a Initio INI-950 SCSI card and I recently > upgraded from SuSE 10.2 to 10.3. The new kernel doesn't see any of my > devices. I get the following in /var/log/messages: > > ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 16 > initio: I/O port range 0x0 is busy. > ACPI: PCI interrupt for device 0000:00:0a.0 disabled Humm not a collision - thats a bug in the driver updating. Looks like the changes I made and combined with Christoph's lost a line somewhere when I was merging it all. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] sym53c8xx: fix "irq X: nobody cared" regressionTony Battersby2007-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | | The patch described by the following excerpt from ChangeLog-2.6.24-rc1 eventually causes a "irq X: nobody cared" error after a while: commit 99c9e0a1d6cfe1ba1169a7a81435ee85bc00e4a1 Author: Matthew Wilcox <matthew@wil.cx> Date: Fri Oct 5 15:55:12 2007 -0400 [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE After this happens, the kernel disables the IRQ, causing the SCSI card to stop working until the next reboot. The problem is caused by the interrupt handler returning IRQ_NONE instead of IRQ_HANDLED after handling an interrupt-on-the-fly (INTF) condition. The following patch fixes the problem. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] dpt_i2o: driver is only 32 bit so don't set 64 bit DMA maskJames Bottomley2007-12-181-2/+1
| | | | | | | | | This fixes a potential corruption bug where the truncation would cause reading or writing to the wrong memory area on machines with >4GB of main memory. Cc: Stable Kernel Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] sym53c8xx: fix free_irq() regressionTony Battersby2007-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | The following commit changed the pointer passed to request_irq(), but failed to change the pointer passed to free_irq(): commit 99c9e0a1d6cfe1ba1169a7a81435ee85bc00e4a1 Author: Matthew Wilcox <matthew@wil.cx> Date: Fri Oct 5 15:55:12 2007 -0400 [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE ... The result is that free_irq() doesn't actually take any action. This patch fixes it. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [IPSEC]: Fix potential dst leak in xfrm_lookupHerbert Xu2007-12-111-3/+6
| | | | | | | | | | | If we get an error during the actual policy lookup we don't free the original dst while the caller expects us to always free the original dst in case of error. This patch fixes that. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [VLAN]: Fix potential race in vlan_cleanup_module vs vlan_ioctl_handler.Pavel Emelyanov2007-12-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The vlan module cleanup function starts with vlan_netlink_fini(); vlan_ioctl_set(NULL); The first call removes all the vlan devices and the second one closes the vlan ioctl. AFAIS there's a tiny race window between these two calls - after rtnl unregistered all the vlans, but the ioctl handler isn't set to NULL yet, user can manage to call this ioctl and create one vlan device, and that this function will later BUG_ON seeing non-emply hashes. I think, that we must first close the vlan ioctl and only after this remove all the vlans with the vlan_netlink_fini() call. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Fix wrong comments for unregister_net*Wang Chen2007-12-111-4/+2
| | | | | | | | There are some return value comments for void functions. Fixed it. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2]: Update version to 1.6.9.Michael Chan2007-12-111-2/+2
| | | | | Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2]: Fix RX packet rot.Michael Chan2007-12-112-13/+14
| | | | | | | | | | | | | | | Packets can be left in the RX ring if the NAPI budget is reached. This is caused by storing the latest rx index at the beginning of bnx2_rx_int(). We may not process all the work up to this index if the budget is reached and so some packets in the RX ring may rot when we later check for more work using this stored rx index. The fix is to not store this latest hw index and only store the processed rx index. We use a new function bnx2_get_hw_rx_cons() to fetch the latest hw rx index. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2]: Add PHY_DIS_EARLY_DAC workaround.Michael Chan2007-12-111-2/+3
| | | | | | | 5709 Ax and Bx chips all need this workaround. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [S390]: Fix use of skb after netif_rxJulia Lawall2007-12-112-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently, Wang Chen submitted a patch (d30f53aeb31d453a5230f526bea592af07944564) to move a call to netif_rx(skb) after a subsequent reference to skb, because netif_rx may call kfree_skb on its argument. netif_rx_ni calls netif_rx, so the same problem occurs in the files below. I have left the updating of dev->last_rx after the calls to netif_rx_ni because it seems time dependent, but moved the other field updates before. This was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression skb, e,e1; @@ ( netif_rx(skb); | netif_rx_ni(skb); ) ... when != skb = e ( skb = e1 | * skb ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XTENSA]: Fix use of skb after netif_rxJulia Lawall2007-12-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently, Wang Chen submitted a patch (d30f53aeb31d453a5230f526bea592af07944564) to move a call to netif_rx(skb) after a subsequent reference to skb, because netif_rx may call kfree_skb on its argument. The same problem occurs in some other drivers as well. This was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression skb, e,e1; @@ ( netif_rx(skb); | netif_rx_ni(skb); ) ... when != skb = e ( skb = e1 | * skb ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [UM]: Fix use of skb after netif_rxJulia Lawall2007-12-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently, Wang Chen submitted a patch (d30f53aeb31d453a5230f526bea592af07944564) to move a call to netif_rx(skb) after a subsequent reference to skb, because netif_rx may call kfree_skb on its argument. The same problem occurs in some other drivers as well. This was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression skb, e,e1; @@ ( netif_rx(skb); | netif_rx_ni(skb); ) ... when != skb = e ( skb = e1 | * skb ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPv6] ESP: Discard dummy packets introduced in rfc4303Thomas Graf2007-12-111-0/+6
| | | | | | | | | | RFC4303 introduces dummy packets with a nexthdr value of 59 to implement traffic confidentiality. Such packets need to be dropped silently and the payload may not be attempted to be parsed as it consists of random chunk. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPv4] ESP: Discard dummy packets introduced in rfc4303Thomas Graf2007-12-111-0/+5
| | | | | | | | | | RFC4303 introduces dummy packets with a nexthdr value of 59 to implement traffic confidentiality. Such packets need to be dropped silently and the payload may not be attempted to be parsed as it consists of random chunk. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV4]: Swap the ifa allocation with the"ipv4_devconf_setall" callPavel Emelyanov2007-12-111-2/+1
| | | | | | | | | | | | | According to Herbert, the ipv4_devconf_setall should be called only when the ifa is added to the device. However, failed ifa allocation may bring things into inconsistent state. Move the call to ipv4_devconf_setall after the ifa allocation. Fits both net-2.6 (with offsets) and net-2.6.25 (cleanly). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6] XFRM: Fix auditing rt6i_flags; use RTF_xxx flags instead of RTCF_xxx.YOSHIFUJI Hideaki2007-12-111-1/+1
| | | | | | | | | RTCF_xxx flags, defined in include/linux/in_route.h) are available for IPv4 route (rtable) entries only. Use RTF_xxx flags instead, defined in include/linux/ipv6_route.h, for IPv6 route entries (rt6_info). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Linux 2.6.24-rc5v2.6.24-rc5Linus Torvalds2007-12-101-1/+1
|
* xen: relax signature checkJeremy Fitzhardinge2007-12-101-1/+1
| | | | | | | | Some versions of Xen 3.x set their magic number to "xen-3.[12]", so relax the test to match them. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2007-12-105-5/+25
|\ | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Malta: Enable tickless and highres timers. [MIPS] Bigsur: Enable tickless and and highres timers. qemu: do not enable IP7 blindly [MIPS] Alchemy: Fix Au1x SD controller IRQ [MIPS] Don't byteswap writes to display when running bigendian
| * [MIPS] Malta: Enable tickless and highres timers.Ralf Baechle2007-12-091-0/+8
| | | | | | | | | | | | | | | | Most Malta use an FPGA CPU card which rarely is good for more than 40MHz. So the performance penalta of the regular timer interrupt, especially for the VSMP kernel model is significant, even at a mere 100Hz. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Bigsur: Enable tickless and and highres timers.Ralf Baechle2007-12-091-0/+9
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * qemu: do not enable IP7 blindlyAtsushi Nemoto2007-12-091-1/+1
| | | | | | | | | | | | | | IP7 will be enabled automatically in mips_clockevent_init(), if available. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Alchemy: Fix Au1x SD controller IRQManuel Lauss2007-12-091-2/+5
| | | | | | | | | | | | | | | | With the introduction of MIPS_CPU_IRQ_BASE, the hardcoded IRQ number of the au1100/au1200 SD controller(s) is no longer valid. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * [MIPS] Don't byteswap writes to display when running bigendianChris Dearman2007-12-091-2/+2
| | | | | | | | | | Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | proc: remove/Fix proc generic d_revalidateEric W. Biederman2007-12-101-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ultimately to implement /proc perfectly we need an implementation of d_revalidate because files and directories can be removed behind the back of the VFS, and d_revalidate is the only way we can let the VFS know that this has happened. Unfortunately the linux VFS can not cope with anything in the path to a mount point going away. So a proper d_revalidate method that calls d_drop also needs to call have_submounts which is moderately expensive, so you really don't want a d_revalidate method that unconditionally calls it, but instead only calls it when the backing object has really gone away. proc generic entries only disappear on module_unload (when not counting the fledgling network namespace) so it is quite rare that we actually encounter that case and has not actually caused us real world trouble yet. So until we get a proper test for keeping dentries in the dcache fix the current d_revalidate method by completely removing it. This returns us to the current status quo. So with CONFIG_NETNS=n things should look as they have always looked. For CONFIG_NETNS=y things work most of the time but there are a few rare corner cases that don't behave properly. As the network namespace is barely present in 2.6.24 this should not be a problem. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "Denis V. Lunev" <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | atmel_spi: reload RCR before TCRRini van Zetten2007-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have a wifi module connected to the spi bus and got sometimes FIFO overrun errors on the spi bus. After some investigation i found that the driver loads the TCR (transmit count) register before the RCR (receive count). When the transfer list is not empty the atmel_spi_next_message is called while tx and rx are enabled. As soon as the TCR is loaded, hardware starts transfer and causes a rx fifo overrun because the RCR is not loaded yet. Load the RCR before the TCR. After this patch the fifo overrun disapears at out setup. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Rini van Zetten <rini@arvoo.nl> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | MAINTAINERS: update stale entriesJoe Perches2007-12-101-15/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some bad email addresses are removed: linux-tr@linuxtr.net ehaase@inf.fu-berlin.de Some are updated: linux@maxim.org.za to andrew@sanpeople.com linux-kernel@linux-mips.org to linux-mips@linux-mips.org jdike@karaya.com to jdike@addtoit.com The PCMCIA entry is corrected to a web address The ZR36120 VIDEO FOR LINUX DRIVER entry is removed Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | esp_scsi: fix reset cleanup spinlock recursionMaciej W. Rozycki2007-12-103-4/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The esp_reset_cleanup() function is called with the host lock held and invokes starget_for_each_device() which wants to take it too. Here is a fix along the lines of shost_for_each_device()/__shost_for_each_device() adding a __starget_for_each_device() counterpart which assumes the lock has already been taken. Eventually, I think the driver should get modified so that more work is done as a softirq rather than in the interrupt context, but for now it fixes a bug that causes the spinlock debugger to fire. While at it, it fixes a small number of cosmetic problems with starget_for_each_device() too. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Fix NULL dereference in umem.cNeil Brown2007-12-101-1/+2
| | | | | | | | | | | | | | | | | | Fix NULL dereference in umem.c Signed-off-by: Neil Brown <neilb@suse.de> Tested-by: Dave Chinner <dgc@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drivers/serial/uartlite.c: Add missing of_node_putJulia Lawall2007-12-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There should be an of_node_put when breaking out of a loop that iterates using for_each_compatible_node. This was detected and fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ identifier d; type T; expression e; iterator for_each_compatible_node; @@ T *d; ... for_each_compatible_node(d,...) {... when != of_node_put(d) when != e = d ( return d; | + of_node_put(d); ? return ...; ) ...} // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | hugetlb: handle write-protection faults in follow_hugetlb_pageAdam Litke2007-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The follow_hugetlb_page() fix I posted (merged as git commit 5b23dbe8173c212d6a326e35347b038705603d39) missed one case. If the pte is present, but not writable and write access is requested by the caller to get_user_pages(), the code will do the wrong thing. Rather than calling hugetlb_fault to make the pte writable, it notes the presence of the pte and continues. This simple one-liner makes sure we also fault on the pte for this case. Please apply. Signed-off-by: Adam Litke <agl@us.ibm.com> Acked-by: Dave Kleikamp <shaggy@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | spi_imx: fix typo in descriptionWill Newton2007-12-101-1/+1
| | | | | | | | | | | | | | Signed-off-by: Will Newton <will.newton@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | spi_bfin5xx: fix typo in descriptionWill Newton2007-12-101-1/+1
| | | | | | | | | | | | | | Signed-off-by: Will Newton <will.newton@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | pxa2xx_spi: fix typo in descriptionWill Newton2007-12-101-1/+1
| | | | | | | | | | | | | | Signed-off-by: Will Newton <will.newton@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | asm-h8300: parentheses around definition CLOCK_TICK_RATERoel Kluin2007-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some places where CLOCK_TICK_RATE may be used incorrectly: arch/arm/mach-mx3/time.c:125: __raw_writel((v / CLOCK_TICK_RATE) - 1, MXC_GPT_GPTPR); drivers/watchdog/davinci_wdt.c:103: timer_margin = (((u64)heartbeat * CLOCK_TICK_RATE) & 0xffffffff); drivers/watchdog/davinci_wdt.c:105: timer_margin = (((u64)heartbeat * CLOCK_TICK_RATE) >> 32); drivers/watchdog/ks8695_wdt.c:64: unsigned long tval = wdt_time * CLOCK_TICK_RATE; I'm not sure whether this definition is used there, but adding parentheses should be good anyway. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | pcmcia: fix kernel-doc commentsRandy Dunlap2007-12-104-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix kernel-doc comments in drivers/pcmcia/: - ti113x.h does not contain kernel-doc, so don't use /** to begin a doc comment - yenta_socket.c: remove /** on non-kernel-doc comments; escape the ':' in an "http:" comment so that it won't be treated as a section heading; - cs.c: remove /** on non-kernel-doc comments & add function parameter info - ds.c: fix function parameter info Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | revert "dpt_i2o: convert to SCSI hotplug model"Andrew Morton2007-12-102-73/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | revert commit 55d9fcf57ba5ec427544fca7abc335cf3da78160 Author: Matthew Wilcox <matthew@wil.cx> Date: Mon Jul 30 15:19:18 2007 -0600 [SCSI] dpt_i2o: convert to SCSI hotplug model - Delete refereces to HOSTS_C - Switch to module_init/module_exit instead of detect/release - Don't pass around the host template and rename it to adpt_template - Switch from scsi_register/scsi_unregister to scsi_host_alloc, scsi_add_host, scsi_scan_host and scsi_host_put. Because it caused (for unknown reasons) Andres' all-data-reads-as-zeroes problem, reported at http://groups.google.com/group/fa.linux.kernel/msg/083a9acff0330234 Cc: Matthew Wilcox <matthew@wil.cx> Cc: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Anders Henke <anders.henke@1und1.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | aoe: properly initialise the request_queue's backing_dev_infoAndrew Morton2007-12-101-10/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AOE forgot to initialise its queue's backing_dev_info, so kernels crash. (http://bugzilla.kernel.org/show_bug.cgi?id=9482) Fix that and consoldate aoeblk_gdalloc()'s error handling. Thanks be to Jon for reporting and testing. Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: <stable@kernel.org> Cc: "Jon Nelson" <jnelson@jamponi.net> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2007-12-101-20/+155
|\ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: OHCI 1.0 Isochronous Receive support
| * | firewire: OHCI 1.0 Isochronous Receive supportJarod Wilson2007-12-101-20/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Third rendition of FireWire OHCI 1.0 Isochronous Receive support, using a zer-copy method similar to OHCI 1.1 which puts the IR data payload directly into the userspace buffer. The zero-copy implementation eliminates the video artifacts, audio popping, and buffer underrun problems seen with version 1 of this patch, as well as fixing a regression in OHCI 1.1 support introduced by version 2 of this patch. Successfully tested in OHCI 1.1 mode on the following chipsets: - NEC uPD72847 (rev 01), OHCI 1.1 (PCI) - Ti XIO2200(A) (rev 01), OHCI 1.1 (PCIe) - Ti TSB41AB2 (rev 01), OHCI 1.1 (PCI on SB Audigy) - Apple UniNorth 2 (rev 81), OHCI 1.1 (PowerBook G4 onboard) Successfully tested in OHCI 1.0 mode on the following chipsets: - Agere FW323 (rev 06), OHCI 1.0 (Mac Mini onboard) - Agere FW323 (rev 06), OHCI 1.0 (PCI) - Via VT6306 (rev 46), OHCI 1.0 (PCI) - NEC OrangeLink (rev 01), OHCI 1.0 (PCI) - NEC uPD72847 (rev 01), OHCI 1.1 (PCI) - Ti XIO2200(A) (rev 01), OHCI 1.1 (PCIe) The bulk of testing was done in an x86_64 system, but was also successfully sanity-tested on other systems, including a PPC(32) PowerBook G4 and an i686 EPIA M10k. Crude benchmarking (watching top during capture) puts the cpu utilization during capture on the EPIA's 1GHz Via C3 processor around 13%, which is down from 30% with the v1 code. Some implementation details: To maintain the same userspace API as dual-buffer mode, we set up two descriptors for every incoming packet. The first is an INPUT_MORE descriptor, pointing to a buffer large enough to hold just the packet's iso headers, immediately followed by an INPUT_LAST descriptor, pointing to a chunk of the userspace buffer big enough for the packet's data payload. With this setup, each incoming packet fills in these two descriptors in a manner that very closely emulates dual-buffer receive, to the point where the bulk of the handle_ir_* code is now identical between the two (and probably primed for some restructuring to share code between them). The only caveat I have at the moment is that neither of my OHCI 1.0 Via VT6307-based FireWire controllers work particularly well with this code for reasons I have yet to figure out. Signed-off-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | | Merge branch 'release' of ↵Linus Torvalds2007-12-1017-53/+56
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix iosapic interrupt delivery mode for CPE [IA64] kprobe: make kreturn probe handler stack unwind correct [IA64] operator priority fix in acpi_map_lsapic() [IA64] Add missing "space" to concatenated strings [IA64] make full use of macro efi_md_size [IA64] rename _bss to __bss_start [IA64] SGI Altix : fix bug in sn_io_late_init() [IA64] iosapic cleanup [IA64] signal : fix missing error checkings [IA64] export copy_page() to modules [IA64] don't assume that unwcheck.py is executable [IA64] increase .data.patch offset
| * | [IA64] Fix iosapic interrupt delivery mode for CPEKenji Kaneshige2007-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If "CPEI Processor Override" bit is not set in "Platform Interrupt Source Flags" in "Platform Interrupt Sources Structure" in ACPI MADT, the target processor of CPEI is restricted to a specific CPU. Because of this, the delivery mode for CPEI should be IOSAPIC_FIXED. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] kprobe: make kreturn probe handler stack unwind correctShaohua Li2007-12-071-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Restore regs->ccr_iip before kreturn probe handler runs. In this way, if probe handler does unwind, unwind can correctly get the stack trace. Fixes: http://sourceware.org/bugzilla/show_bug.cgi?id=5051 Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] operator priority fix in acpi_map_lsapic()Roel Kluin2007-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | '!' has a higher priority than '&', so as was this won't test the first bit, but rather evaluates to false for any non-zero lsapic->lapic_flags. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] Add missing "space" to concatenated stringsJoe Perches2007-12-073-7/+7
| | | | | | | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] make full use of macro efi_md_sizeLi Zefan2007-12-071-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Macro efi_md_size is defined in efi.c, and here we apply it throughout efi.c. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] rename _bss to __bss_startBernhard Walle2007-12-073-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename _bss to __bss_start as on other architectures. That makes it possible to use the <linux/sections.h> instead of own declarations. Also add __bss_stop because that symbol exists on other architectures. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
OpenPOWER on IntegriCloud