summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* OMAPDSS: interface drivers register their panel devicesTomi Valkeinen2012-05-119-41/+128
| | | | | | | | | | | | | | | | | | | | | Currently the higher level omapdss platform driver gets the list of displays in its platform data, and uses that list to create the omap_dss_device for each display. With DT, the logical way to do the above is to list the displays under each individual output, i.e. we'd have "dpi" node, under which we would have the display that uses DPI. In other words, each output driver handles the displays that use that particular output. To make the current code ready for DT, this patch modifies the output drivers so that each of them creates the display devices which use that output. However, instead of changing the platform data to suit this method, each output driver is passed the full list of displays, and the drivers pick the displays that are meant for them. This allows us to keep the old platform data, and thus we avoid the need to change the board files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: change default_device handlingTomi Valkeinen2012-05-111-5/+9
| | | | | | | | | | | | | | | | | | | | We currently have a two ways to set a "default panel device" for dss, to which the overlays are connected when the omapdss driver is loaded: - in textual format (name of the display) as cmdline parameter - as a pointer to the panel device from board file via pdata The current code handles this in a bit too complex way by using both of the above methods during runtime. However, with DT we don't have pdata anymore, so the code handling the second case won't work anymore. The current code has also the problem that it modifies the platform_data. This patch simplifies the code a bit by using the pointer method only inside the probe function, and stores the name of the panel device. This way we only need to handle the textual format during operation and also avoid modifying the platform_data. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPFB: add __init & __exitTomi Valkeinen2012-05-111-5/+4
| | | | | | Change omapfb to use platform_driver_probe and add __init & __exit. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: add __init & __exitTomi Valkeinen2012-05-1110-56/+56
| | | | | | | Now that we are using platform_driver_probe() we can add __inits and __exits all around. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: use platform_driver_probe for dsi/hdmi/rfbi/venc/dpi/sdiTomi Valkeinen2012-05-116-12/+6
| | | | | | | | Now that the core.c doesn't fail if output driver's init fails, we can change the uses of platform_driver_register to platform_driver_probe. This will allow us to use __init in the following patches. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: move the creation of debugfs filesTomi Valkeinen2012-05-118-74/+48
| | | | | | | | Instead of having an ugly #ifdef mess in the core.c for creating debugfs files, add a dss_debugfs_create_file() function that the dss drivers can use to create the debugfs files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: handle output-driver reg/unreg more dynamicallyTomi Valkeinen2012-05-112-93/+59
| | | | | | | | Initialize and uninitialize the output drivers by using arrays of pointers to the init/uninit functions. This simplifies the code slightly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: remove uses of dss_runtime_get/putTomi Valkeinen2012-05-119-99/+11
| | | | | | | | | Now that the omapdss_core device is the parent for all other dss devices, we don't need to use the dss_runtime_get/put anymore. Instead, enabling omapdss_core will happen automatically when a child device is enabled. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: create DPI & SDI driversTomi Valkeinen2012-05-115-41/+71
| | | | | | | | | | | | | | | We currently have separate device/driver for each DSS HW module. The DPI and SDI outputs are more or less parts of the DSS or DISPC hardware modules, but in SW it makes sense to represent them as device/driver pairs similarly to all the other outputs. This also makes sense for device tree, as each node under dss will be a platform device, and handling DPI & SDI somehow differently than the rest would just make the code more complex. This patch modifies the dpi.c and sdi.c to create drivers for the platform devices. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: create DPI & SDI devicesTomi Valkeinen2012-05-111-0/+57
| | | | | | | | | | | | | | | | We currently have separate device/driver for each DSS HW module. The DPI and SDI outputs are more or less parts of the DSS or DISPC hardware modules, but in SW it makes sense to represent them as device/driver pairs similarly to all the other outputs. This also makes sense for device tree, as each node under dss will be a platform device, and handling DPI & SDI somehow differently than the rest would just make the code more complex. This patch modifies arch/arm/mach-omap2/display.c to create platform devices for DPI and SDI, and later patches will implement driver for them. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: create custom pdevs for DSS omap_devicesTomi Valkeinen2012-05-111-14/+87
| | | | | | | | | Instead of using omap_device_build() to create the omap_devices for DSS hwmods, create them with a custom function. This will allow us to create a parent-child hierarchy for the devices so that the omapdss_core device is parent for the rest of the dss hwmod devices. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: use platform_driver_probe for core/dispc/dssTomi Valkeinen2012-05-113-6/+3
| | | | | | | | The platform devices for omapdss, dss and dispc drivers are always present, so we can use platform_driver_probe instead of platform_driver_register. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: remove return from platform_driver_unregTomi Valkeinen2012-05-116-6/+6
| | | | | | | | | For unknown reasons we seem to have a return in each of the omapdss's uninit functions, which is a void function. Remove the returns. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: clean up the omapdss platform data messTomi Valkeinen2012-05-117-60/+62
| | | | | | | | | | | | | | | | | The omapdss pdata handling is a mess. This is more evident when trying to use device tree for DSS, as we don't have platform data anymore in that case. This patch cleans the pdata handling by: - Remove struct omap_display_platform_data. It was used just as a wrapper for struct omap_dss_board_info. - Pass the platform data only to omapdss device. The drivers for omap dss hwmods do not need the platform data. This should also work better for DT, as we can create omapdss device programmatically in generic omap boot code, and thus we can pass the pdata to it. - Create dss functions for get_ctx_loss_count and dsi_enable/disable_pads that the dss hwmod drivers can call. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: DSI: use dsi_get_dsidev_id(dsidev) instead of dsidev->idTomi Valkeinen2012-05-111-3/+3
| | | | | | | | The DSI driver uses dsi_get_dsidev_id() to get the ID number for the DSI instance. However, there were a few places where dsidev->id was used instead of the function. Fix those places to use the function. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: TFP410: pdata rewriteTomi Valkeinen2012-05-111-34/+38
| | | | | | | | To ease device tree adaptation in the future, rewrite TFP410 platform data handling to be done inside probe(), so that probe() is the only place where we need to handle the DT/pdata choice. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPFB: fix parsing of vram parameterTomi Valkeinen2012-05-111-1/+1
| | | | | | | | | | | | | omapfb_parse_vram_param()'s check for end pointer returned from simple_strtoul() is wrong, causing the code to bug if the second or later vram parameters are non-parseable, for example "omapfb.vram=0:2M,:5M". However, even in that case the code will most likely bail out with -EINVAL in the following checks, so the bug is probably not a fatal one. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: Hein Tibosch <hein_tibosch@yahoo.es>
* OMAPDSS: OMAPFB: always allow to configure overlayGrazvydas Ignotas2012-05-111-2/+2
| | | | | | | | | | | | | Currently when multiple overlays are active, OMAPFB_SETUP_PLANE fails. Instead of failing, allow it to configure the first overlay as if there was only one overlay, the remaining ones will have to be configured in other ways (sysfs). This allows overlay-controlling programs (like video players) to function properly when framebuffer is cloned to another display (like TV). Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* OMAPDSS: VENC: allow switching venc output type at runtimeGrazvydas Ignotas2012-05-112-1/+54
| | | | | | | | | | | | | | VENC output type (composite/svideo) doesn't have to be fixed by board wiring, it is possible to also provide composite signal through svideo luminance connector (software enabled), which is what pandora does. Having to recompile the kernel for users who have TV connector types that don't match default board setting is very inconvenient, especially for users of a consumer device, so add support for switching VENC output type at runtime over a new sysfs file output_type. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* Merge branch 'for-l-o-3.5'Tomi Valkeinen2012-05-1019-448/+251
|\ | | | | | | | | | | | | | | Conflicts: drivers/video/omap2/displays/panel-taal.c Merge OMAP DSS related board file changes. The branch will also be merged through linux-omap tree to solve conflicts.
| * OMAPDSS: DSI: implement generic DSI pin configTomi Valkeinen2012-05-095-89/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for device tree, this patch changes how the DSI pins are configured. The current configuration method is only doable with board files and the configuration data is OMAP specific. This patch moves the configuration data to the panel's platform data, and the data can easily be given via DT in the future. The configuration data format is also changed to a generic one which should be suitable for all platforms. The new format is an array of pin numbers, where the array items start from clock + and -, then data1 + and -, and so on. For example: { 0, // pin num for clock lane + 1, // pin num for clock lane - 2, // pin num for data1 lane + 3, // pin num for data1 lane - ... } The pin numbers are translated by the DSI driver and used to configure the hardware appropriately. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| * OMAPDSS: Taal: move reset gpio handling to taal driverTomi Valkeinen2012-05-092-16/+15
| | | | | | | | | | | | | | | | | | The reset GPIO for Taal panel driver is currently requested in the 4430sdp board file. This patch moves the gpio request/free into the Taal driver, where it should be. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| * OMAPDSS: TFP410: rename dvi files to tfp410Tomi Valkeinen2012-05-0913-12/+12
| | | | | | | | | | | | | | | | Now that the tfp410 driver has been renamed in the code, this patch finishes the renaming by renaming the files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| * OMAPDSS: TFP410: rename dvi -> tfp410Tomi Valkeinen2012-05-0914-78/+78
| | | | | | | | | | | | | | | | | | The driver for the TFP410 DPI-to-DVI chip was named quite badly as "DVI panel driver". This patch renames the code to use tfp410 name for the driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| * OMAP: board-files: remove custom PD GPIO handling for DVI outputTomi Valkeinen2012-05-0912-257/+14
| | | | | | | | | | | | | | | | Now that the panel-dvi driver handles the PD (power-down) GPIO, we can remove the custom PD handling from the board files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| * OMAPDSS: panel-dvi: add PD gpio handlingTomi Valkeinen2012-05-092-0/+33
| | | | | | | | | | | | | | | | | | | | The driver for the TFP410 chip should handle the power-down signal of the chip, instead of the current way of handling it in the board files. This patch adds power_down_gpio into the device's platform data, and adds the necessary code in the driver to request and handle the GPIO. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | Merge branch 'archit/set-timing-work'Tomi Valkeinen2012-05-0911-90/+175
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An overlay manager's timings (the manager size, and blanking parameters if an LCD manager) are DISPC shadow registers, and they should hence follow the correct programming model. This series makes the video timings an extra_info parameter in manager's private data. The interface drivers now apply the timings instead of directly writing to registers. This change also prevents the need to use display resolution for overlay checks, hence making some of the APPLY functions less dependent on the display. Some DISPC functions that needed display width can also use these privately stored timings. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAPDSS: DISPC: Remove usage of dispc_mgr_get_device()Archit Taneja2012-05-093-32/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The functions calc_fclk_five_taps() and check_horiz_timing_omap3() use the function dispc_mgr_get_device() to get the omap_dss_device pointer to which the manager is connected, the width of the panel is derived from that. The manager's timing is stored in it's private data in APPLY. This contains the latest timings applied to the manager. Pass these timings to dispc_ovl_setup() and use them in the above functions. Remove the function dispc_mgr_get_device() as it isn't used any more. Signed-off-by: Archit Taneja <archit@ti.com>
| * | OMAPDSS: DISPC: Remove omap_dss_device pointer usage from dispc_mgr_pclk_rate()Archit Taneja2012-05-091-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pixel clock rate for the TV manager is calculated by checking the device type connected to the manager, and then requesting the VENC/HDMI interface for the pixel clock rate. Remove the use of omap_dss_device pointer from here by checking which interface generates the pixel clock by reading the DSS_CTRL.VENC_HDMI_SWITCH bit. Signed-off-by: Archit Taneja <archit@ti.com>
| * | OMAPDSS: APPLY: Remove an unnecessary omap_dss_device pointerArchit Taneja2012-05-091-3/+0
| | | | | | | | | | | | | | | | | | | | | The omap_dss_device pointer declared in dss_ovl_setup_fifo() isn't used. Remove the pointer variable declaration and it's assignment. Signed-off-by: Archit Taneja <archit@ti.com>
| * | OMAPDSS: DPI/HDMI: Apply manager timings even if panel is disabledArchit Taneja2012-05-092-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DPI and HDMI interfaces use their 'set_timing' functions to take in a new set of timings. If the panel is disabled, they do not disable and re-enable the interface. Currently, the manager timings are applied in hdmi_power_on() and dpi_set_mode() respectively, these are not called by set_timings if the panel is disabled. When checking overlay and manager data, the DSS driver uses the last applied manager timings, and not the timings held by omap_dss_device struct. Hence, there is a need to apply the new manager timings even if the panel is disabled. Apply the manager timings if the panel is disabled. Eventually, there should be one common place where the timings are applied independent of the state of the panel. Signed-off-by: Archit Taneja <archit@ti.com>
| * | OMAPDSS: APPLY: Remove display dependency from overlay and manager checksArchit Taneja2012-05-094-25/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to check the validity of overlay and manager info, there was a need to use the omap_dss_device struct to get the panel resolution. The manager's private data in APPLY now contains the manager timings. Hence, we don't need to rely on the display resolution any more. Pass the manager's timings in private data to dss_mgr_check(). Remove the need to pass omap_dss_device structs in the functions which check for the validity of overlay and manager parameters. Signed-off-by: Archit Taneja <archit@ti.com>
| * | OMAPDSS: APPLY: Don't check manager settings if it is disabledArchit Taneja2012-05-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a manager is disabled, there is no guarantee at any point in time that all it's parameters are configured. There is always a chance that some more parameters are yet to be configured by a user of DSS, or by DSS itself. However, when the manager is enabled, we can be certain that all the parameters have been configured, as we can't enable a manager with an incomplete configuration. Therefore, if a manager is disabled, don't check for the validity of it's parameters or the parameters of the overlays connected to it. Only check once it is enabled. Add a check in dss_check_settings_low() to achieve the same. Signed-off-by: Archit Taneja <archit@ti.com>
| * | OMAPDSS: MANAGER: Create a function to check manager timingsArchit Taneja2012-05-094-3/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a function dss_mgr_check_timings() which wraps around the function dispc_mgr_timings_ok(). This is mainly a clean up to hide dispc functions from interface drivers. dss_mgr_check_timings() is added in the function dss_mgr_check(), it currently takes the timings maintained in the omap_dss_device struct. This would be later replaced by the timings stored in the manager's private data. Make dss_mgr_check_timings() and dispc_mgr_timings_ok() take a const omap_video_timings pointer since these functions just check the timings. Signed-off-by: Archit Taneja <archit@ti.com>
| * | OMAPDSS: Apply manager timings instead of direct DISPC writesArchit Taneja2012-05-096-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the function dispc_mgr_set_timings() with dss_mgr_set_timings() in the interface drivers. The latter function ensures that the timing related DISPC registers are configured according to the shadow register programming model. Remove the call to dispc_mgr_go() in dpi_set_timings() as the manager's go bit is set by dss_mgr_set_timings(). Signed-off-by: Archit Taneja <archit@ti.com>
| * | OMAPDSS: APPLY: Add manager timings as extra_info in private dataArchit Taneja2012-05-092-13/+85
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DISPC manager size and DISPC manager blanking parameters(for LCD managers) follow the shadow register programming model. Currently, they are programmed directly by the interface drivers. To configure manager timings using APPLY, there is a need to introduce extra info flags for managers, similar to what is done for overlays. This is needed because timings aren't a part of overlay_manager_info struct configured by a user of DSS, they are configured internally by the interface or panel drivers. Add dirty and shadow_dirty extra_info flags for managers, update these flags at the appropriate places. Rewrite the function extra_info_update_ongoing() slightly as checking for manager's extra_info flags can simplify the code a bit. Create function dss_mgr_set_timings() which applies the new manager timings to extra_info. Signed-off-by: Archit Taneja <archit@ti.com>
* | OMAPDSS: DISPC: Remove Fake VSYNC supportArchit Taneja2012-05-094-35/+0
| | | | | | | | | | | | | | | | | | | | Fake VSYNC support is a hack and has some bugs in it. It isn't used by any user of DSS. Remove Fake VSYNC support. For DSI command mode and RFBI panels, a user of DSS should wait for the completion of a frame by using the panel driver's sync op. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAPDSS: Fix DSI_FCLK clock source selectionArchit Taneja2012-05-091-2/+3
| | | | | | | | | | | | | | | | | | The wrong bit field was being updated in DSS_CTRL when trying to configure the clock source of DSI2 functional clock. Use the correct bit field based on the dsi module number. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAPDSS: HDMI: define and dump CORE registers in correct orderArchit Taneja2012-05-092-68/+59
| | | | | | | | | | | | | | | | | | | | | | | | The HDMI core register offset macros aren't defined in ascending order of their values, some of the offset macros are also redefined. The same issues occur when these core registers are dumped. Clean up the ordering of HDMI core registers and remove repeated registers in the definition in ti_hdmi_4xxx_ip.h and in ti_hdmi_4xxx_core_dump(). Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAPDSS: HDMI: Fix ti_hdmi_4xxx_core_dumpArchit Taneja2012-05-091-70/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function ti_hdmi_4xxx_core_dump has some bugs, the following mention the bugs and the solutions: - The macros DUMPCORE and DUMPCOREAV in ti_hdmi_4xxx_core_dump() use hdmi_pll_base() for the offsets needed to calculate register addresses, use functions hdmi_core_sys_base() amd hdmi_av_base() to calculate the correct offsets for CORE_SYS and CORE_AV registers. - Many of the CORE_AV registers use the DUMPCORE macro, and hence the register addresses are calculated incorrectly. Rename the current DUMPCOREAV macro as DUMPCOREAV2 as it takes 2 arguments to dump indexed CORE_AV registers, create a new macro called DUMPCOREAV which is now used for dumping non-indexed CORE_AV registers. Thanks to Ancy Tom <ancytom@gmail.com> for pointing out the issues. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAPDSS: DISPC: Correct DISPC functional clock usageChandrabhanu Mahapatra2012-05-032-27/+41
| | | | | | | | | | | | | | | | | | | | DISPC_FCLK is incorrectly used as functional clock of DISPC in scaling calculations. So, DISPC_CORE_CLK replaces as functional clock of DISPC. DISPC_CORE_CLK is derived from DISPC_FCLK divided by an independent DISPC divisor LCD. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAPDSS: DISPC: Handle synclost errors in OMAP3Chandrabhanu Mahapatra2012-05-031-3/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In OMAP3 DISPC video overlays suffer from some undocumented horizontal position and timing related limitations leading to SYNCLOST errors. Whenever the image window is moved towards the right of the screen SYNCLOST errors become frequent. Checks have been implemented to see that DISPC driver rejects configuration exceeding above limitations. This code was successfully tested on OMAP3. This code is written based on code written by Ville Syrjälä <ville.syrjala@nokia.com> in Linux OMAP kernel. Ville Syrjälä <ville.syrjala@nokia.com> had added checks for video overlay horizontal timing and DISPC horizontal blanking length limitations. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAPDSS: DISPC: Enable predecimationChandrabhanu Mahapatra2012-05-031-81/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In OMAP3 and OMAP4, the DISPC Scaler can downscale an image up to 4 times, and up to 2 times in OMAP2. However, with predecimation, the image can be reduced to 16 times by fetching only the necessary pixels in memory. Then this predecimated image can be downscaled further by the DISPC scaler. The pipeline is configured to use a burst of size 8 * 128 bits which consists of 8 mini bursts of 16 bytes each. So, horizontal predecimation more than 16 can lead to complete discarding of such mini bursts. L3 interconnect may handover the bus to some other initiator and inturn delay the fetching of pixels leading to underflows. So, maximum predecimation limit is fixed at 16. Based on the downscaling required, a prior calculation of predecimation values for width and height of an image is done. Since, Predecimation reduces quality of an image higher priorty is given to DISPC Scaler for downscaling. This code was successfully tested on OMAP2, OMAP3 and OMAP4. Horizontal and vertical predecimation worked fine except for some synclost errors due to undocumented errata in OMAP3 which are fixed later and skewed images were seen on OMAP2 and OMAP3 during horizontal predecimation which will be addressed in the future patches. This code is based on code written by Lajos Molnar <lajos@ti.com> who had added predecimation support for NV12/YUV/rotated/SDMA buffers. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | ARM: OMAP2+ Add Primview displays to panel-genericJan Weitzel2012-04-231-0/+63
| | | | | | | | | | | | | | | | | | | | Add displays to panel-generic-dpi.c Prime View PD050VL1 (640 x 480) Prime View PD104SLF (800 x 600) Prime View PM070WL4 (800 x 480) Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAPDSS: DISPC: Clean up manager timing/size functionsArchit Taneja2012-04-235-23/+37
| | | | | | | | | | | | | | | | | | | | | | Clean up the DISPC manager timings related function by: - Create a common function to set size for LCD and TV. - Create a common function to check timings for LCD and TV. - Add dss params to get the range of manager size. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAPDSS: DISPC: Use a common function to set manager timingsArchit Taneja2012-04-238-31/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, a LCD manager's timings is set by dispc_mgr_set_lcd_timings() and TV manager's timings is set by dispc_set_digit_size(). Use a common function called dispc_mgr_set_timings() which sets timings for both type of managers. We finally want the interface drivers to use an overlay manager function to configure it's timings, having a common DISPC function would make things cleaner. For LCD managers, dispc_mgr_set_timings() sets LCD size and blanking values, for TV manager, it sets only the TV size since blanking values don't exist for TV. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAPDSS: DISPC/RFBI: Use dispc_mgr_set_lcd_timings() for setting lcd sizeArchit Taneja2012-04-233-4/+24
| | | | | | | | | | | | | | | | | | | | | | | | The RFBI driver uses dispc_mgr_set_lcd_size() to set the width and height of the LCD manager. Replace this to use dispc_mgr_set_lcd_timings(), pass dummy blanking parameters like done in the DSI driver. This prevents the need to export dispc_mgr_set_lcd_size(), and use a common function to set lcd timings. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAPFB: remove unused FB_OMAP_BOOTLOADER_INIT config optionPeter Meerwald2012-04-231-8/+0
| | | | | | | | | | | | | | | | | | code depending on FB_OMAP_BOOTLOADER_INIT has been removed long before (e.g. Tomi Valkeinen, 03 Mar 2011: OMAP: DSS2: Remove FB_OMAP_BOOTLOADER_INIT support), but the option still exists Kconfig and has no use Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAPDSS: Add EDT ET0500G0DH6 display supportThomas Weber2012-04-231-0/+18
| | | | | | | | | | | | | | | | The EDT ET0500G0DH6 is a 5 inch display. It is tested on an OMAP3 board. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAPDSS: Add Mitsubishi AA084SB01 display supportThomas Weber2012-04-231-0/+19
| | | | | | | | | | | | | | | | | | This patch adds support for the Mitsubishi display AA084SB01. This is a 7 inch LVDS display. It is tested with an OMAP3 board. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
OpenPOWER on IntegriCloud