summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* tg3: Reintroduce 5717_PLUSMatt Carlson2011-04-062-24/+17
| | | | | | | | This patch reintroduces the TG3_FLG3_5717_PLUS to identify 5717 and later devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: 5717_PLUS => 57765_PLUSMatt Carlson2011-04-062-22/+22
| | | | | | | | | The 57765 arrived before the 5717 and has a subset of the features supported by the 5717. This patch renames the 5717_PLUS flag so that it can be reintroduced to designate only 5717 and later devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Cleanup extended rx ring size codeMatt Carlson2011-04-062-21/+27
| | | | | | | | | | Hardcoded values are used in multiple places to describe the maximum rx ring sizes. This patch replaces those values with preprocessor constants. This patch also introduces a new TG3_FLG3_LRG_PROD_RING_CAP to determine if the device is capable of supporting larger ring sizes. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Allow no-cache copy from user on transmitTom Herbert2011-04-046-6/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses __copy_from_user_nocache on transmit to bypass data cache for a performance improvement. skb_add_data_nocache and skb_copy_to_page_nocache can be called by sendmsg functions to use this feature, initial support is in tcp_sendmsg. This functionality is configurable per device using ethtool. Presumably, this feature would only be useful when the driver does not touch the data. The feature is turned on by default if a device indicates that it does some form of checksum offload; it is off by default for devices that do no checksum offload or indicate no checksum is necessary. For the former case copy-checksum is probably done anyway, in the latter case the device is likely loopback in which case the no cache copy is probably not beneficial. This patch was tested using 200 instances of netperf TCP_RR with 1400 byte request and one byte reply. Platform is 16 core AMD x86. No-cache copy disabled: 672703 tps, 97.13% utilization 50/90/99% latency:244.31 484.205 1028.41 No-cache copy enabled: 702113 tps, 96.16% utilization, 50/90/99% latency 238.56 467.56 956.955 Using 14000 byte request and response sizes demonstrate the effects more dramatically: No-cache copy disabled: 79571 tps, 34.34 %utlization 50/90/95% latency 1584.46 2319.59 5001.76 No-cache copy enabled: 83856 tps, 34.81% utilization 50/90/95% latency 2508.42 2622.62 2735.88 Note especially the effect on latency tail (95th percentile). This seems to provide a nice performance improvement and is consistent in the tests I ran. Presumably, this would provide the greatest benfits in the presence of an application workload stressing the cache and a lot of transmit data happening. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: range check STP parametersstephen hemminger2011-04-047-93/+107
| | | | | | | | | | | | | | | | | | | | | | | | Apply restrictions on STP parameters based 802.1D 1998 standard. * Fixes missing locking in set path cost ioctl * Uses common code for both ioctl and sysfs This is based on an earlier patch Sasikanth V but with overhaul. Note: 1. It does NOT enforce the restriction on the relationship max_age and forward delay or hello time because in existing implementation these are set as independant operations. 2. If STP is disabled, there is no restriction on forward delay 3. No restriction on holding time because users use Linux code to act as hub or be sticky. 4. Although standard allow 0-255, Linux only allows 0-63 for port priority because more bits are reserved for port number. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: allow creating bridge devices with netlinkstephen hemminger2011-04-045-87/+101
| | | | | | | | | | | | | | | | | | Add netlink device ops to allow creating bridge device via netlink. This works in a manner similar to vlan, macvlan and bonding. Example: # ip link add link dev br0 type bridge # ip link del dev br0 The change required rearranging initializtion code to deal with being called by create link. Most of the initialization happens in br_dev_setup, but allocation of stats is done in ndo_init callback to deal with allocation failure. Sysfs setup has to wait until after the network device kobject is registered. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: allow creating/deleting fdb entries via netlinkstephen hemminger2011-04-043-0/+144
| | | | | | | | | | | | Use RTM_NEWNEIGH and RTM_DELNEIGH to allow updating of entries in bridge forwarding table. This allows manipulating static entries which is not possible with existing tools. Example (using bridge extensions to iproute2) # br fdb add 00:02:03:04:05:06 dev eth0 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: add netlink notification on forward entry changesstephen hemminger2011-04-043-0/+127
| | | | | | | | | | | | | | This allows applications to query and monitor bridge forwarding table in the same method used for neighbor table. The forward table entries are returned in same structure format as used by the ioctl. If more information is desired in future, the netlink method is extensible. Example (using bridge extensions to iproute2) # br monitor Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: split rcu and no-rcu cases of fdb lookupstephen hemminger2011-04-041-3/+16
| | | | | | | | | In some cases, look up of forward database entry is done with RCU; and for others no RCU is needed because of locking. Split the two cases into two differnt loops (and take off inline). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: track last used time in forwarding tablestephen hemminger2011-04-043-8/+10
| | | | | | | | Adds tracking the last used time in forwarding table. Rename ageing_timer to updated to better describe it. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: change arguments to fdb_createstephen hemminger2011-04-041-8/+10
| | | | | | | | | Later patch provides ability to create non-local static entry. To make this easier move the updating of the flag values to after the code that creates entry. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* pkt_sched: QFQ - quick fair queue schedulerstephen hemminger2011-04-044-0/+1164
| | | | | | | | | | | This is an implementation of the Quick Fair Queue scheduler developed by Fabio Checconi. The same algorithm is already implemented in ipfw in FreeBSD. Fabio had an earlier version developed on Linux, I just cleaned it up. Thanks to Eric Dumazet for testing this under load. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen: netfront: assume all hw features are available until backend connection ↵Ian Campbell2011-04-041-0/+8
| | | | | | | | | | | | setup We need to assume that all features will be available when registering the netdev otherwise they are ommitted from the initial set of dev->wanted_features. When we connect to the backed we reduce the set as necessary due to the call to netdev_update_features() in xennet_connect(). Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2011-04-0438-68/+149
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
| * mlx4: fix kfree on error path in new_steering_entry()Mariusz Kozlowski2011-04-031-2/+2
| | | | | | | | | | | | | | | | On error path kfree() should get pointer to memory allocated by kmalloc() not the address of variable holding it (which is on stack). Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tcp: len check is unnecessarily devastating, change to WARN_ONIlpo Järvinen2011-04-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | All callers are prepared for alloc failures anyway, so this error can safely be boomeranged to the callers domain without super bad consequences. ...At worst the connection might go into a state where each RTO tries to (unsuccessfully) re-fragment with such a mis-sized value and eventually dies. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sctp: malloc enough room for asconf-ack chunkWei Yongjun2011-04-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometime the ASCONF_ACK parameters can equal to the fourfold of ASCONF parameters, this only happend in some special case: ASCONF parameter is : Unrecognized Parameter (4 bytes) ASCONF_ACK parameter should be: Error Cause Indication parameter (8 bytes header) + Error Cause (4 bytes header) + Unrecognized Parameter (4bytes) Four 4bytes Unrecognized Parameters in ASCONF chunk will cause panic. Pid: 0, comm: swapper Not tainted 2.6.38-next+ #22 Bochs Bochs EIP: 0060:[<c0717eae>] EFLAGS: 00010246 CPU: 0 EIP is at skb_put+0x60/0x70 EAX: 00000077 EBX: c09060e2 ECX: dec1dc30 EDX: c09469c0 ESI: 00000000 EDI: de3c8d40 EBP: dec1dc58 ESP: dec1dc2c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=dec1c000 task=c09aef20 task.ti=c0980000) Stack: c09469c0 e1894fa4 00000044 00000004 de3c8d00 de3c8d00 de3c8d44 de3c8d40 c09060e2 de25dd80 de3c8d40 dec1dc7c e1894fa4 dec1dcb0 00000040 00000004 00000000 00000800 00000004 00000004 dec1dce0 e1895a2b dec1dcb4 de25d960 Call Trace: [<e1894fa4>] ? sctp_addto_chunk+0x4e/0x89 [sctp] [<e1894fa4>] sctp_addto_chunk+0x4e/0x89 [sctp] [<e1895a2b>] sctp_process_asconf+0x32f/0x3d1 [sctp] [<e188d554>] sctp_sf_do_asconf+0xf8/0x173 [sctp] [<e1890b02>] sctp_do_sm+0xb8/0x159 [sctp] [<e18a2248>] ? sctp_cname+0x0/0x52 [sctp] [<e189392d>] sctp_assoc_bh_rcv+0xac/0xe3 [sctp] [<e1897d76>] sctp_inq_push+0x2d/0x30 [sctp] [<e18a21b2>] sctp_rcv+0x7a7/0x83d [sctp] [<c077a95c>] ? ipv4_confirm+0x118/0x125 [<c073a970>] ? nf_iterate+0x34/0x62 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c0747992>] ip_local_deliver_finish+0xf5/0x194 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44 [<c0747ab3>] ip_local_deliver+0x3e/0x44 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c074775c>] ip_rcv_finish+0x29f/0x2c7 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44 [<c0747cae>] ip_rcv+0x1f5/0x233 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7 [<c071dce3>] __netif_receive_skb+0x310/0x336 [<c07221f3>] netif_receive_skb+0x4b/0x51 [<e0a4ed3d>] cp_rx_poll+0x1e7/0x29c [8139cp] [<c072275e>] net_rx_action+0x65/0x13a [<c0445a54>] __do_softirq+0xa1/0x149 [<c04459b3>] ? __do_softirq+0x0/0x149 <IRQ> [<c0445891>] ? irq_exit+0x37/0x72 [<c040a7e9>] ? do_IRQ+0x81/0x95 [<c07b3670>] ? common_interrupt+0x30/0x38 [<c0428058>] ? native_safe_halt+0xa/0xc [<c040f5d7>] ? default_idle+0x58/0x92 [<c0408fb0>] ? cpu_idle+0x96/0xb2 [<c0797989>] ? rest_init+0x5d/0x5f [<c09fd90c>] ? start_kernel+0x34b/0x350 [<c09fd0cb>] ? i386_start_kernel+0xba/0xc1 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sctp: fix auth_hmacs field's length of struct sctp_cookieWei Yongjun2011-04-011-1/+1
| | | | | | | | | | | | | | | | | | | | auth_hmacs field of struct sctp_cookie is used for store Requested HMAC Algorithm Parameter, and each HMAC Identifier is 2 bytes, so the length should be: SCTP_AUTH_NUM_HMACS * sizeof(__u16) + 2 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: Fix dev dev_ethtool_get_rx_csum() for forced NETIF_F_RXCSUMMichał Mirosław2011-04-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | dev_ethtool_get_rx_csum() won't report rx checksumming when it's not changeable and driver is converted to hw_features and friends. Fix this. (dev->hw_features & NETIF_F_RXCSUM) check is dropped - if the ethtool_ops->get_rx_csum is set, then driver is not coverted, yet. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * usbnet: use eth%d name for known ethernet devicesArnd Bergmann2011-04-0111-12/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The documentation for the USB ethernet devices suggests that only some devices are supposed to use usb0 as the network interface name instead of eth0. The logic used there, and documented in Kconfig for CDC is that eth0 will be used when the mac address is a globally assigned one, but usb0 is used for the locally managed range that is typically used on point-to-point links. Unfortunately, this has caused a lot of pain on the smsc95xx device that is used on the popular pandaboard without an EEPROM to store the MAC address, which causes the driver to call random_ether_address(). Obviously, there should be a proper MAC addressed assigned to the device, and discussions are ongoing about how to solve this, but this patch at least makes sure that the default interface naming gets a little saner and matches what the user can expect based on the documentation, including for new devices. The approach taken here is to flag whether a device might be a point-to-point link with the new FLAG_POINTTOPOINT setting in the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one of the two. The usbnet framework only looks at the MAC address for device naming if both flags are set, otherwise it trusts the flag. Signed-off-by: Arnd Bergmann <arnd.bergmann@linaro.org> Tested-by: Andy Green <andy.green@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * starfire: clean up dma_addr_t size testFUJITA Tomonori2011-04-011-5/+1
| | | | | | | | | | | | | | | | Now we have CONFIG_ARCH_DMA_ADDR_T_64BIT. We can fix the hacky dma_addr_t size test cleanly. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'master' of ↵David S. Miller2011-04-0118-35/+104
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * iwlegacy: fix bugs in change_interfaceJohannes Berg2011-03-291-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If change_interface gets invoked during a firmware restart, it may crash; prevent that from happening by checking if ctx->vif is assigned. Additionally, in my initial commit I forgot to set the vif->p2p variable correctly, so fix that too. Cc: stable@kernel.org [2.6.38+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * carl9170: Fix tx aggregation problems with some clientsChristian Lamparter2011-03-293-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some clients seem to rely upon the reception of BlockAckReqs to flush their rx reorder buffer. In order to fix aggregation for these clients carl9170 should set IEEE80211_TX_STAT_AMPDU_NO_BACK to generate a BlockAckReq if the transmission of an AMPDU subframe fails. This fixes aggregation problems with Intel 5100 Windows STAs (and maybe others as well). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * iwl3945: disable hw scan by defaultStanislaw Gruszka2011-03-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After new NetworkManager 0.8.996 changes, hardware scanning is causing microcode errors as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=683571 and sometimes kernel crashes: https://bugzilla.redhat.com/show_bug.cgi?id=688252 Also with hw scan there are very bad performance on some systems as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=671366 Since Intel no longer supports 3945, there is no chance to get proper firmware fixes, we need workaround problems by disable hardware scanning by default. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * wireless: rt2x00: rt2800usb.c add and identify idsXose Vazquez Perez2011-03-291-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | taken from staging/rt2860 0x0411,0x016f de37cd49b5a54facef174cf34496919857436e8f MelCo(Buffalo) WLI-UC-G301N 0x050d,0x825b 12840c63b0679f7fab88ea1cc26b52db8b574ce7 Belkin F5D8055 0x050d,0x935a 705059a670f3af2b37695e82de0ee58e75e656ed Belkin F6D4050 v1 0x050d,0x935b 5d92fe3387d086fc2f10426fbdb6b86d6cce5a47 Belkin F6D4050 v2 identifed from ralink driverss 0x0930,0x0a07 RT35xx TOSHIBA 2010_1215_RT3572_Linux_STA_v2.5.0.0.DPO 0x1d4d,0x0011 3072 Pegatron 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * iwl3945: do not deprecate software scanStanislaw Gruszka2011-03-291-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Software scanning can be used for workaround some performance problems, so do not deprecate it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mac80211: fix aggregation frame release during timeoutDaniel Halperin2011-03-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Suppose the aggregation reorder buffer looks like this: x-T-R1-y-R2, where x and y are frames that have not been received, T is a received frame that has timed out, and R1,R2 are received frames that have not yet timed out. The proper behavior in this scenario is to move the window past x (skipping it), release T and R1, and leave the window at y until y is received or R2 times out. As written, this code will instead leave the window at R1, because it has not yet timed out. Fix this by exiting the reorder loop only when the frame that has not timed out AND there are skipped frames earlier in the current valid window. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * cfg80211: fix BSS double-unlinking (continued)Juuso Oikarinen2011-03-281-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds to the fix "fix BSS double-unlinking" (commit 3207390a8b58bfc1335750f91cf6783c48ca19ca) by Johannes Berg. It turns out, that the double-unlinking scenario can also occur if expired BSS elements are removed whilst an interface is performing association. To work around that, replace list_del with list_del_init also in the "cfg80211_bss_expire" function, so that the check for whether the BSS still is in the list works correctly in cfg80211_unlink_bss. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * cfg80211:: fix possible NULL pointer dereferenceMariusz Kozlowski2011-03-281-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | In cfg80211_inform_bss_frame() wiphy is first dereferenced on privsz initialisation and then it is checked for NULL. This patch fixes that. Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mac80211: fix possible NULL pointer dereferenceMariusz Kozlowski2011-03-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves 'key' dereference after BUG_ON(!key) so that when key is NULL we will see proper trace instead of oops. Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mac80211: fix NULL pointer dereference in ieee80211_key_alloc()Petr Štetiar2011-03-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ieee80211_key struct can be kfree()d several times in the function, for example if some of the key setup functions fails beforehand, but there's no check if the struct is still valid before we call memcpy() and INIT_LIST_HEAD() on it. In some cases (like it was in my case), if there's missing aes-generic module it could lead to the following kernel OOPS: Unable to handle kernel NULL pointer dereference at virtual address 0000018c .... PC is at memcpy+0x80/0x29c ... Backtrace: [<bf11c5e4>] (ieee80211_key_alloc+0x0/0x234 [mac80211]) from [<bf1148b4>] (ieee80211_add_key+0x70/0x12c [mac80211]) [<bf114844>] (ieee80211_add_key+0x0/0x12c [mac80211]) from [<bf070cc0>] (__cfg80211_set_encryption+0x2a8/0x464 [cfg80211]) Signed-off-by: Petr Štetiar <ynezz@true.cz> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k: fix a chip wakeup related crash in ath9k_startFelix Fietkau2011-03-281-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | When the chip is still asleep when ath9k_start is called, ath9k_hw_configpcipowersave can trigger a data bus error. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mac80211: fix a crash in minstrel_ht in HT mode with no supported MCS ratesFelix Fietkau2011-03-281-7/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a client connects in HT mode but does not provide any valid MCS rates, the function that finds the next sample rate gets stuck in an infinite loop. Fix this by falling back to legacy rates if no usable MCS rates are found. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * Bluetooth: Fix warning with hci_cmd_timerThomas Gleixner2011-03-241-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After we made debugobjects working again, we got the following: WARNING: at lib/debugobjects.c:262 debug_print_object+0x8e/0xb0() Hardware name: System Product Name ODEBUG: free active (active state 0) object type: timer_list hint: hci_cmd_timer+0x0/0x60 Pid: 2125, comm: dmsetup Tainted: G W 2.6.38-06707-gc62b389 #110375 Call Trace: [<ffffffff8104700a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff810470b6>] warn_slowpath_fmt+0x46/0x50 [<ffffffff812d3a5e>] debug_print_object+0x8e/0xb0 [<ffffffff81bd8810>] ? hci_cmd_timer+0x0/0x60 [<ffffffff812d4685>] debug_check_no_obj_freed+0x125/0x230 [<ffffffff810f1063>] ? check_object+0xb3/0x2b0 [<ffffffff810f3630>] kfree+0x150/0x190 [<ffffffff81be4d06>] ? bt_host_release+0x16/0x20 [<ffffffff81be4d06>] bt_host_release+0x16/0x20 [<ffffffff813a1907>] device_release+0x27/0xa0 [<ffffffff812c519c>] kobject_release+0x4c/0xa0 [<ffffffff812c5150>] ? kobject_release+0x0/0xa0 [<ffffffff812c61f6>] kref_put+0x36/0x70 [<ffffffff812c4d37>] kobject_put+0x27/0x60 [<ffffffff813a21f7>] put_device+0x17/0x20 [<ffffffff81bda4f9>] hci_free_dev+0x29/0x30 [<ffffffff81928be6>] vhci_release+0x36/0x70 [<ffffffff810fb366>] fput+0xd6/0x1f0 [<ffffffff810f8fe6>] filp_close+0x66/0x90 [<ffffffff810f90a9>] sys_close+0x99/0xf0 [<ffffffff81d4c96b>] system_call_fastpath+0x16/0x1b That timer was introduced with commit 6bd32326cda(Bluetooth: Use proper timer for hci command timout) Timer seems to be running when the thing is closed. Removing the timer unconditionally fixes the problem. And yes, it needs to be fixed before the HCI_UP check. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| | * Bluetooth: delete hanging L2CAP channelAndrei Emeltchenko2011-03-241-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | Sometimes L2CAP connection remains hanging. Make sure that L2CAP channel is deleted. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| | * Bluetooth: Fix missing hci_dev_lock_bh in user_confirm_replyJohan Hedberg2011-03-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The code was correctly calling _unlock at the end of the function but there was no actual _lock call anywhere. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| | * Bluetooth: Fix sending LE data over USBVinicius Costa Gomes2011-03-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have support for LE connections, before discarding a frame we must check if there's a LE connection over that transport. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| | * Bluetooth: Fix HCI_RESET command synchronizationGustavo F. Padovan2011-03-243-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can't send new commands before a cmd_complete for the HCI_RESET command shows up. Reported-by: Mikko Vinni <mmvinni@yahoo.com> Reported-by: Justin P. Mattock <justinmattock@gmail.com> Reported-by: Ed Tomlinson <edt@aei.ca> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Tested-by: Justin P. Mattock <justinmattock@gmail.com> Tested-by: Mikko Vinni <mmvinni@yahoo.com> Tested-by: Ed Tomlinson <edt@aei.ca>
| | * Bluetooth: Increment unacked_frames count only the first transmitSuraj Sumangala2011-03-241-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch lets 'l2cap_pinfo.unacked_frames' be incremented only the first time a frame is transmitted. Previously it was being incremented for retransmitted packets too resulting the value to cross the transmit window size. Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| | * Bluetooth: add support for Apple MacBook Pro 8,2Marc-Antoine Perennou2011-03-241-0/+3
| | | | | | | | | | | | | | | | | | | | | Just adding the vendor details makes it work fine. Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * | appletalk: Fix OOPS in atalk_release().David S. Miller2011-03-311-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 60d9f461a20ba59219fdcdc30cbf8e3a4ad3f625 ("appletalk: remove the BKL") added a dereference of "sk" before checking for NULL in atalk_release(). Guard the code block completely, rather than partially, with the NULL check. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | mlx4: Fixing bad size of event queue bufferYevgeny Petrilin2011-03-311-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should reduce the number of reserved completion queues from the total number of entries. Since the queue size is power of two, not reducing the reserved entries, caused a double queue size, which may lead to allocation failures in some cases. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | mlx4: Fixing use after freeYevgeny Petrilin2011-03-311-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of allocation failure, tried to use the promiscuous QP entry that was previously freed. Now freeing this entry only in case we will not put it back to the list of promiscuous entries. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bonding:typo in commentPeter Pan(潘卫平)2011-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | | use accumulates instead of acumulates. Signed-off-by: Pan Weiping <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | mISDN: fix "persistant" typoJan Engelhardt2011-04-031-10/+10
| | | | | | | | | | | | | | | Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | xen: netfront: fix declaration orderEric Dumazet2011-04-031-36/+36
| | | | | | | | | | | | | | | | | | | | | | | | Must declare xennet_fix_features() and xennet_set_features() before using them. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | vlan: convert VLAN devices to use ndo_fix_features()Michał Mirosław2011-04-022-42/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note: get_flags was actually broken, because it should return the flags capped with vlan_features. This is now done implicitly by limiting netdev->hw_features. RX checksumming offload control is (and was) broken, as there was no way before to say whether it's done for tagged packets. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: Call netdev_features_change() from netdev_update_features()Michał Mirosław2011-04-023-9/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | Issue FEAT_CHANGE notification when features are changed by netdev_update_features(). This will allow changes made by extra constraints on e.g. MTU change to be properly propagated like changes via ethtool. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: convert sunhme/sungem network drivers to hw_featuresMichał Mirosław2011-04-012-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Side effects: - TX offloads (HW csum, scatter-gather) can be toggled now - RX checksum is reported correctly now (it's always active) Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud