summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] pcmcia: IDs for Elan serial PCMCIA devciesTony Olech2006-12-043-1/+27
| | | | | | | | | | Add IDs for Elan serial PCMCIA devices. In addition, move the pdaudio_cf driver from matching based on manf_id and card_id to the more specific prod_id1 and prod_id2 to avoid false positives. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* [PATCH] pcmcia: allow for four multifunction subdevicesDominik Brodowski2006-12-041-2/+2
| | | | | | | Some Elan serial cards allow for four (independent) multifunction subdevices. Teach the PCMCIA core to deal with such devices. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* [PATCH] pcmcia: handle __copy_from_user() return value in ioctlDominik Brodowski2006-12-041-1/+6
| | | | | | | | | | Handle __copy_from_user() return value. drivers/pcmcia/pcmcia_ioctl.c:597: warning: ignoring return value of '__copy_from_user', declared with attribute warn_unused_result Noticed and first fix by Randy Dunlap. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* [PATCH] pcmcia: multifunction card handling fixesDominik Brodowski2006-12-042-68/+90
| | | | | | | | | | | | | | | | | | s->functions needs to be initialized earlier, for the "let's see how high it increases" approach means that pcmcia_request_irq() (which makes use of this value) is confused, and might request an exclusive IRQ first even though it is not supposed to. Also, a CIS override autoloaded using the firmware loader may allow for the use of more or less functions in a multifunction card. Therefore, we may need to schedule a call to add this second function later on, or simply remove the other function (it's always the first -valid- function which reaches this codepath). Many thanks to Fabrice Bellet for debugging and testing patches. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* [PATCH] pcmcia: allow shared IRQs on pd6729 socketsKomuro2006-12-041-4/+4
| | | | | | | | Use IRQF_PROBE_SHARED flag for request_irq() to find an unused interrupt for PCMCIA cards. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* [PATCH] pcmcia: start over after CIS overrideDominik Brodowski2006-12-043-7/+11
| | | | | | | When overriding the CIS, re-start the configuration of the card from scratch. Reported and debugged by Fabrice Bellet <fabrice@bellet.info> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* [PATCH] cm4000_cs: fix return value checkAkinobu Mita2006-12-042-6/+6
| | | | | | | | | | The return value of class_create() need to be checked with IS_ERR(). And register_chrdev() returns errno on failure. This patch includes these fixes for cm4000_cs and cm4040_cs. Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com> Signed-off-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* [PATCH] pcmcia: yet another IDE IDMarcin Juszkiewicz2006-12-042-0/+2
| | | | | | | | | | | | | Microdrive reported by one of OpenEmbedded developers. product info: "WEIDA", "TWTTI", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) (equivalent update to pata_pcmcia.c by Dominik Brodowski) Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* [PATCH] pcmcia: Add an id to ide-cs.cMatt Reimer2006-12-042-0/+2
| | | | | | | | | | | Add an ID entry for: product info: "TRANSCEND", "TS1GCF80", "", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2006-12-0460-981/+3822
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (82 commits) [PATCH] pata_ali: small fixes [PATCH] pata_via: VIA 8251 bridged systems are now out and about [PATCH] trivial piix: swap bogus dot for comma space [PATCH] sata_promise: PHYMODE4 fixup [PATCH] libata: always use polling IDENTIFY [libata] pata_cs5535: fix build [PATCH] ahci: do not powerdown during initialization [PATCH] libata: prepare ata_sg_clean() for invocation from EH [PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf() [PATCH] libata: implement ata_exec_internal_sg() [PATCH] libata: make sure IRQ is cleared after ata_bmdma_freeze() [PATCH] libata: move BMDMA host status recording from EH to interrupt handler [PATCH] libata: make sure sdev doesn't go away while rescanning [PATCH] libata: don't request sense if the port is frozen [PATCH] libata: fix READ CAPACITY simulation [PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, take #2 [PATCH] libata: set IRQF_SHARED for legacy PCI IDE IRQs [PATCH] libata: remove unused HSM_ST_UNKNOWN [PATCH] libata: kill unnecessary sht->max_sectors initializations [PATCH] libata: add missing sht->slave_destroy ...
| * [PATCH] pata_ali: small fixesAlan2006-12-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Switch to pci_get_bus_and_slot because some x86 systems seem to be handing us a device with dev->bus = NULL. Also don't apply the isa fixup to revision C6 and later of the chip. Really we need to work out wtf is handing us pdev->bus = NULL, but firstly and more importantly we need the drivers working. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_via: VIA 8251 bridged systems are now out and aboutAlan2006-12-041-0/+2
| | | | | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] trivial piix: swap bogus dot for comma spaceAlan2006-12-041-1/+1
| | | | | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] sata_promise: PHYMODE4 fixupMikael Pettersson2006-12-031-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds code to fix up the PHYMODE4 "align timing" register value on second-generation Promise SATA chips. Failure to correct this value on non-x86 machines makes drive detection prone to failure due to timeouts. (I've observed about 50% detection failure rates on SPARC64.) The HW boots with a bad value in this register, but on x86 machines the Promise BIOS corrects it to the value recommended by the manual, so most people have been unaffected by this issue. After developing the patch I checked Promise's SATAII driver, and discovered that it also corrects PHYMODE4 just like this patch does. This patch depends on the sata_promise SATAII updates patch I sent recently. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: always use polling IDENTIFYTejun Heo2006-12-035-17/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libata switched to IRQ-driven IDENTIFY when IRQ-driven PIO was introduced. This has caused a lot of problems including device misdetection and phantom device. ATA_FLAG_DETECT_POLLING was added recently to selectively use polling IDENTIFY on problemetic drivers but many controllers and devices are affected by this problem and trying to adding ATA_FLAG_DETECT_POLLING for each such case is diffcult and not very rewarding. This patch makes libata always use polling IDENTIFY. This is consistent with libata's original behavior and drivers/ide's behavior. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [libata] pata_cs5535: fix buildJeff Garzik2006-12-031-1/+1
| | | | | | | | | | | | Noticed by Tejun and others. Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] ahci: do not powerdown during initializationTejun Heo2006-12-031-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ahci_init_controller() calls ahci_deinit_port() to make sure the controller is stopped before initializing the controller. In turn, ahci_deinit_port() invokes ahci_power_down() to power down the port. If the controller supports slumber mode, the link is put into it. Unfortunately, some devices don't implement link powersaving mode properly and show erratic behavior after link is put into slumber mode. For example, HL-DT-ST DVD-RAM GSA-H30N completely locks up on slumber transition and can only be recovered with the *REAL* hard reset - power removal and reapply. Note that this makes the first probing reset different from all others. If the above dvd-ram is hotplugged after ahci is initialized, no problem occurs because ahci is already fully initialized with phy powered up. So, this might also be the reason for other weird AHCI initial probing abnormalities. This patch moves power up/down out of port init/deinit and call them only when needed. Power down is now called only when suspending. As system suspend usually involves powering down 12v for storage devices, this shouldn't cause problem even if the attached device doesn't support slumber mode. However, in partial power management and suspend failure cases, devices might lock up after suspend attempt. I thought about removing transition to slumber mode altogether but ahci spec mandates it before HBA D3 state transition. Blacklisting such devices might be the solution. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: prepare ata_sg_clean() for invocation from EHTejun Heo2006-12-032-3/+4
| | | | | | | | | | | | Make ata_sg_clean() global and don't allow NCQ for internal commands. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf()Tejun Heo2006-12-033-112/+145
| | | | | | | | | | | | | | Separate out rw ATA taskfile building from ata_scsi_rw_xlat() into ata_build_rw_tf(). This will be used to improve media error handling. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: implement ata_exec_internal_sg()Tejun Heo2006-12-032-7/+46
| | | | | | | | | | | | | | | | Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: make sure IRQ is cleared after ata_bmdma_freeze()Tejun Heo2006-12-032-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that BMDMA status is recorded in irq handler. ata_bmdma_freeze() is free to manipulate host status. Under certain circumstances, some controllers (ICH7 in enhanced mode w/ IRQ shared) raise IRQ when CTL register is written to and ATA_NIEN doesn't mask it. This patch makes ata_bmdma_freeze() clear all pending IRQs after freezing a port. This change makes explicit clearing in ata_device_add() unnecessary and thus kills it. The removed code was SFF-specific and was in the wrong place. Note that ->freeze() handler is always called under ap->lock held and irq disabled. Even if CTL manipulation causes stuck IRQ, it's cleared immediately. This should be safe (enough) even in SMP environment. More correct solution is to mask the IRQ from IRQ controller but that would be an overkill. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: move BMDMA host status recording from EH to interrupt handlerTejun Heo2006-12-033-3/+11
| | | | | | | | | | | | | | | | | | For certain errors, interrupt handler alter BMDMA host status before entering EH (clears active and intr). Thus altered BMDMA host status value is recorded by BMDMA EH and reported to user. Move BMDMA host status recording from EH to interrupt handler. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: make sure sdev doesn't go away while rescanningTejun Heo2006-12-031-4/+16
| | | | | | | | | | | | | | ata_scsi_dev_rescan() doesn't synchronize against SCSI device detach and the target sdev might go away in the middle. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: don't request sense if the port is frozenTejun Heo2006-12-031-13/+15
| | | | | | | | | | | | | | | | If EH command is issued to a frozen port, it fails with AC_ERR_SYSTEM. libata used to request sense even when the port is frozen needlessly adding AC_ERR_SYSTEM to err_mask. Don't do it. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: fix READ CAPACITY simulationTejun Heo2006-12-031-45/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * READ CAPACITY (16) implementation fixed. Result was shifted by two bytes. Carlos Pardo spotted this problem and submitted preliminary patch. Capacity => 2TB is handled correctly now. (verifid w/ fake capacity) * Use dev->n_sectors instead of re-reading directly from ID data. * Define and use ATA_SCSI_RBUF_SET() which considers rbuf length. This should be done for all simulation functions. Userland can issue any simulated command with arbitrary buffer length. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Carlos Pardo <Carlos.Pardo@siliconimage.com>
| * [PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, ↵Tejun Heo2006-12-033-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | take #2 This patch implements ATA_FLAG_SETXFER_POLLING and use in pata_via. If this flag is set, transfer mode setting performed by polling not by interrupt. This should help those controllers which raise interrupt before the command is actually complete on SETXFER. Rationale for this approach. * uses existing facility and relatively simple * no busy sleep in the interrupt handler * updating drivers is easy While at it, kill now unused flag ATA_FLAG_SRST in pata_via. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: set IRQF_SHARED for legacy PCI IDE IRQsTejun Heo2006-12-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are machines out there which share legacy PCI IDE IRQs w/ other devices. libata SFF interrupt/HSM code is ready for shared IRQ and has been setting IRQF_SHARED for devices in native PCI mode. Device in legacy mode is still a PCI device and thus supposedly uses active-low level triggered IRQ. Machines with such setup should be quite rare and w/o this flag libata is likely to fail loading and render the system unuseable. Also, IDE driver has been setting IRQF_SHARED for devices in legacy mode for a looooong time. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: remove unused HSM_ST_UNKNOWNTejun Heo2006-12-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HSM_ST_UNKNOWN is not used anywhere. Its value is zero and supposed to serve sanity check purpose but HSM_ST_IDLE is used for that purpose. This unused state causes confusion. After a port is initialized but before the first command is executed, the idle hsm state is UNKNOWN. However, once a command has completed, the idle hsm state is IDLE. This defeats sanity check in ata_pio_task() for the first command. This patch removes HSM_ST_UNKNOWN and consequently make HSM_ST_IDLE the default state. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: kill unnecessary sht->max_sectors initializationsTejun Heo2006-12-0343-49/+0
| | | | | | | | | | | | | | sht->max_sectors is overrided unconditionally in ->slave_configure. There's no reason to set it to any value. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: add missing sht->slave_destroyTejun Heo2006-12-034-0/+4
| | | | | | | | | | | | | | Add missing sht->slave_destroy. Most drivers received this fix in didn't. Fix those four drives. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: print cdb[0] in failed qc reportTejun Heo2006-12-011-2/+3
| | | | | | | | | | | | | | Print cdb[0] in failed qc report. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] sata_nv: fix ATAPI in ADMA modeRobert Hancock2006-12-011-130/+188
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The attached patch against 2.6.19-rc6-mm1 fixes some problems in sata_nv with ATAPI devices on controllers running in ADMA mode. Some of the logic in the nv_adma_bmdma_* functions was inverted causing a bunch of warnings and caused those functions not to work properly. Also, when an ATAPI device is connected, we need to use the legacy DMA engine. The code now disables the PCI configuration register bits for ADMA so that this works, and ensures that no ATAPI DMA commands go through until this is done. Fixes Bugzilla http://bugzilla.kernel.org/show_bug.cgi?id=7538 Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_marvell: merge Mandriva patchesAlan2006-12-011-3/+3
| | | | | | | | | | | | | | | | | | Correct and complete the Marvell PATA cable detection logic. From: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_hpt3x3: suspend/resume supportAlan2006-12-011-12/+34
| | | | | | | | | | | | | | Again split the chipset init away and call it both on resume and on setup Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata : more drivers that need only standard suspend and resumeAlan2006-12-012-3/+11
| | | | | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] hpt36x: Suspend/resume supportAlan2006-12-011-14/+35
| | | | | | | | | | | | | | | | Another chipset which needs some reconfiguration after a resume. All the chip setup is moved to a new function called in both setup and resume. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_via suspend/resume supportAlan2006-12-011-18/+76
| | | | | | | | | | | | | | | | | | | | The major VIA issues were handled by the quirks update for resume quirks. The ATA driver also has to do some work however when resuming from RAM. Certain chips need the FIFO reconfiguring, and the 66MHz clock setup updating. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_amd: suspend/resumeAlan2006-12-011-2/+23
| | | | | | | | | | | | | | | | Early AMD chips require FIFO and/or simplex flag clearing work on resume from RAM. Most devices need no help Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_it821x: Suspend/Resume supportAlan2006-12-011-2/+14
| | | | | | | | | | | | | | | | If you are using the noraid option then after a suspend/resume sequence we need to reset the card back out of raid mode again. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_serverworks suspend/resumeAlan2006-12-011-2/+30
| | | | | | | | | | | | | | | | The Serverworks chips need various fixups doing on a resume from RAM. Conveniently the needed functions were already split out ready for re-use Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_cmd64x: suspend/resumeAlan2006-12-011-2/+20
| | | | | | | | | | | | | | | | On a resume of the CMD64x we must restore MRDMODE and latency if the BIOS didn't get them right originally. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_cs5520: resume supportAlan2006-12-011-2/+22
| | | | | | | | | | | | | | | | | | The CS5520 doesn't need much help to resume but we do need to restore pcicfg which may have been reset to the BIOS default which is sometimes incorrect. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] PATA libata: suspend/resume simple casesAlan2006-12-0115-47/+82
| | | | | | | | | | | | | | | | | | This patch adds the suspend/resume callbacks for drivers which don't need any additional help (beyond the pci resume quirk patch I posted earlier anyway). Also bring version numbers back inline with master copies. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_sil680 suspend/resumeAlan2006-12-011-27/+55
| | | | | | | | | | | | | | | | | | The SI680 can come back from s2ram with the clocks disabled (crash time) or wrong (ugly as this can cause CRC errors, and in theory corruption). On a resume we must put the clock back. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_rz1000: Force readahead off on resumeAlan2006-12-011-15/+33
| | | | | | | | | | | | | | | | | | | | | | The RZ1000 is a generic device except that it has a readahead fifo flaw that corrupts. We force this off at init time but we want to be paranoid and force it off at resume as well. I don't know of any actual hardware that supports both RZ1000 and suspend to RAM but given its a disk muncher better safe than sorry. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_ali: suspend/resume supportAlan2006-12-011-51/+84
| | | | | | | | | | | | | | | | | | Various chipset functions must be reprogrammed on a resume from RAM, without this things like ATAPI DMA stop working on resume with some chipset variants. Split the chipset programming and init time method selection into two functions. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_jmicron: fix JMB368 support, add suspend/resume handlingAlan2006-12-011-6/+28
| | | | | | | | | | | | | | | | | | This (and the pci resume quirk code) get the JMicron controllers to resume properly. Without this patch the drive mapping changes when you suspend/resume which is not good at all.... Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_cs5530: suspend/resume supportAlan2006-12-011-37/+62
| | | | | | | | | | | | | | | | | | The 5530 needs various set up performing both at init time and resume time. To keep the code clean the common setup code is moved into a new function and called from both handlers. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] pata_hpt366 enablebitsAlan2006-12-011-1/+9
| | | | | | | | | | | | | | More enablebits Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] sata_promise fixes and updatesMikael Pettersson2006-12-011-11/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the sata_promise driver as follows: - Correct typo in definition of PDC_TBG_MODE: it's at 0x41C not 0x41 in first-generation chips. This error caused PCI access alignment exceptions on SPARC64, and on all platforms it disabled the expected initialisation of TBG mode. - Add flags field to struct pdc_host_priv. Define PDC_FLAG_GEN_II and use it to distinguish first- and second-generation chips. - Prevent the FLASH_CTL FIFO_SHD bit from being set to 1 on second- generation chips. This matches Promises' ulsata2 driver. - Prevent TBG mode and SLEW rate initialisation in second-generation chips. These two registers have moved, TBG mode has been redefined, and Promise's ulsata2 driver no longer attempts to initialise them. - Correct PCI device table so devices 0x3570, 0x3571, and 0x3d73 are marked as 2057x (2nd gen) not 2037x (1st gen). - Correct PCI device table so device 0x3d17 is marked as 40518 (2nd gen 4 ports) not 20319 (1st gen 4 ports). - Correct pdc_ata_init_one() to treat 20771 as a second-generation chip. Tested on 0x3d75 (2nd gen), 0x3d73 (2nd gen), and 0x3373 (1st gen) chips. The information comes from the newly uploaded Promise SATA HW specs, Promise's ultra and ulsata2 drivers, and debugging on 3d75/3d73/3373 chips. hp->hotplug_offset could now be removed and its value recomputed in pdc_host_init() using hp->flags, but that would be a cleanup not a functional change, so I'm ignoring it for now. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
OpenPOWER on IntegriCloud