diff options
Diffstat (limited to 'sound/soc')
| -rw-r--r-- | sound/soc/atmel/Kconfig | 21 | ||||
| -rw-r--r-- | sound/soc/atmel/Makefile | 4 | ||||
| -rw-r--r-- | sound/soc/atmel/playpaq_wm8510.c | 473 | ||||
| -rw-r--r-- | sound/soc/codecs/ad1836.h | 2 | ||||
| -rw-r--r-- | sound/soc/codecs/cs4270.c | 10 | ||||
| -rw-r--r-- | sound/soc/codecs/cs42l51.c | 2 | ||||
| -rw-r--r-- | sound/soc/codecs/max9877.c | 10 | ||||
| -rw-r--r-- | sound/soc/codecs/wm8994.c | 7 | ||||
| -rw-r--r-- | sound/soc/fsl/mpc8610_hpcd.c | 24 | ||||
| -rw-r--r-- | sound/soc/samsung/smdk_wm8994.c | 1 | ||||
| -rw-r--r-- | sound/soc/samsung/speyside.c | 2 | ||||
| -rw-r--r-- | sound/soc/soc-core.c | 6 |
12 files changed, 40 insertions, 522 deletions
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index bee3c94f58b0..d1fcc816ce97 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -1,6 +1,6 @@ config SND_ATMEL_SOC tristate "SoC Audio for the Atmel System-on-Chip" - depends on ARCH_AT91 || AVR32 + depends on ARCH_AT91 help Say Y or M if you want to add support for codecs attached to the ATMEL SSC interface. You will also need @@ -24,25 +24,6 @@ config SND_AT91_SOC_SAM9G20_WM8731 Say Y if you want to add support for SoC audio on WM8731-based AT91sam9g20 evaluation board. -config SND_AT32_SOC_PLAYPAQ - tristate "SoC Audio support for PlayPaq with WM8510" - depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS - select SND_ATMEL_SOC_SSC - select SND_SOC_WM8510 - help - Say Y or M here if you want to add support for SoC audio - on the LRS PlayPaq. - -config SND_AT32_SOC_PLAYPAQ_SLAVE - bool "Run CODEC on PlayPaq in slave mode" - depends on SND_AT32_SOC_PLAYPAQ - default n - help - Say Y if you want to run with the AT32 SSC generating the BCLK - and FRAME signals on the PlayPaq. Unless you want to play - with the AT32 as the SSC master, you probably want to say N here, - as this will give you better sound quality. - config SND_AT91_SOC_AFEB9260 tristate "SoC Audio support for AFEB9260 board" depends on ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile index e7ea56bd5f82..a5c0bf19da78 100644 --- a/sound/soc/atmel/Makefile +++ b/sound/soc/atmel/Makefile @@ -8,9 +8,5 @@ obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o # AT91 Machine Support snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o -# AT32 Machine Support -snd-soc-playpaq-objs := playpaq_wm8510.o - obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o -obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c deleted file mode 100644 index 73ae99ad4578..000000000000 --- a/sound/soc/atmel/playpaq_wm8510.c +++ /dev/null @@ -1,473 +0,0 @@ -/* sound/soc/at32/playpaq_wm8510.c - * ASoC machine driver for PlayPaq using WM8510 codec - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum@acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c - * - * NOTE: If you don't have the AT32 enhanced portmux configured (which - * isn't currently in the mainline or Atmel patched kernel), you will - * need to set the MCLK pin (PA30) to peripheral A in your board initialization - * code. Something like: - * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); - * - */ - -/* #define DEBUG */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> - -#include <mach/at32ap700x.h> -#include <mach/portmux.h> - -#include "../codecs/wm8510.h" -#include "atmel-pcm.h" -#include "atmel_ssc_dai.h" - - -/*-------------------------------------------------------------------------*\ - * constants -\*-------------------------------------------------------------------------*/ -#define MCLK_PIN GPIO_PIN_PA(30) -#define MCLK_PERIPH GPIO_PERIPH_A - - -/*-------------------------------------------------------------------------*\ - * data types -\*-------------------------------------------------------------------------*/ -/* SSC clocking data */ -struct ssc_clock_data { - /* CMR div */ - unsigned int cmr_div; - - /* Frame period (as needed by xCMR.PERIOD) */ - unsigned int period; - - /* The SSC clock rate these settings where calculated for */ - unsigned long ssc_rate; -}; - - -/*-------------------------------------------------------------------------*\ - * module data -\*-------------------------------------------------------------------------*/ -static struct clk *_gclk0; -static struct clk *_pll0; - -#define CODEC_CLK (_gclk0) - - -/*-------------------------------------------------------------------------*\ - * Sound SOC operations -\*-------------------------------------------------------------------------*/ -#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE -static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( - struct snd_pcm_hw_params *params, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai); - struct ssc_device *ssc = ssc_p->ssc; - struct ssc_clock_data cd; - unsigned int rate, width_bits, channels; - unsigned int bitrate, ssc_div; - unsigned actual_rate; - - - /* - * Figure out required bitrate - */ - rate = params_rate(params); - channels = params_channels(params); - width_bits = snd_pcm_format_physical_width(params_format(params)); - bitrate = rate * width_bits * channels; - - - /* - * Figure out required SSC divider and period for required bitrate - */ - cd.ssc_rate = clk_get_rate(ssc->clk); - ssc_div = cd.ssc_rate / bitrate; - cd.cmr_div = ssc_div / 2; - if (ssc_div & 1) { - /* round cmr_div up */ - cd.cmr_div++; - } - cd.period = width_bits - 1; - - - /* - * Find actual rate, compare to requested rate - */ - actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); - pr_debug("playpaq_wm8510: Request rate = %u, actual rate = %u\n", - rate, actual_rate); - - - return cd; -} -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - -static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai); - struct ssc_device *ssc = ssc_p->ssc; - unsigned int pll_out = 0, bclk = 0, mclk_div = 0; - int ret; - - - /* Due to difficulties with getting the correct clocks from the AT32's - * PLL0, we're going to let the CODEC be in charge of all the clocks - */ -#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - const unsigned int fmt = (SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); -#else - struct ssc_clock_data cd; - const unsigned int fmt = (SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS); -#endif - - if (ssc == NULL) { - pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n"); - return -EINVAL; - } - - - /* - * Figure out PLL and BCLK dividers for WM8510 - */ - switch (params_rate(params)) { - case 48000: - pll_out = 24576000; - mclk_div = WM8510_MCLKDIV_2; - bclk = WM8510_BCLKDIV_8; - break; - - case 44100: - pll_out = 22579200; - mclk_div = WM8510_MCLKDIV_2; - bclk = WM8510_BCLKDIV_8; - break; - - case 22050: - pll_out = 22579200; - mclk_div = WM8510_MCLKDIV_4; - bclk = WM8510_BCLKDIV_8; - break; - - case 16000: - pll_out = 24576000; - mclk_div = WM8510_MCLKDIV_6; - bclk = WM8510_BCLKDIV_8; - break; - - case 11025: - pll_out = 22579200; - mclk_div = WM8510_MCLKDIV_8; - bclk = WM8510_BCLKDIV_8; - break; - - case 8000: - pll_out = 24576000; - mclk_div = WM8510_MCLKDIV_12; - bclk = WM8510_BCLKDIV_8; - break; - - default: - pr_warning("playpaq_wm8510: Unsupported sample rate %d\n", - params_rate(params)); - return -EINVAL; - } - - - /* - * set CPU and CODEC DAI configuration - */ - ret = snd_soc_dai_set_fmt(codec_dai, fmt); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CODEC DAI format (%d)\n", - ret); - return ret; - } - ret = snd_soc_dai_set_fmt(cpu_dai, fmt); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CPU DAI format (%d)\n", - ret); - return ret; - } - - - /* - * Set CPU clock configuration - */ -#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai); - pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n", - cd.cmr_div, cd.period); - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n", - ret); - return ret; - } - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD, - cd.period); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CPU transmit period (%d)\n", - ret); - return ret; - } -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - /* - * Set CODEC clock configuration - */ - pr_debug("playpaq_wm8510: " - "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n", - clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div); - - -#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk); - if (ret < 0) { - pr_warning - ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n", - ret); - return ret; - } -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - ret = snd_soc_dai_set_pll(codec_dai, 0, 0, - clk_get_rate(CODEC_CLK), pll_out); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n", - ret); - return ret; - } - - - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n", - ret); - return ret; - } - - - return 0; -} - - - -static struct snd_soc_ops playpaq_wm8510_ops = { - .hw_params = playpaq_wm8510_hw_params, -}; - - - -static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = { - SND_SOC_DAPM_MIC("Int Mic", NULL), - SND_SOC_DAPM_SPK("Ext Spk", NULL), -}; - - - -static const struct snd_soc_dapm_route intercon[] = { - /* speaker connected to SPKOUT */ - {"Ext Spk", NULL, "SPKOUTP"}, - {"Ext Spk", NULL, "SPKOUTN"}, - - {"Mic Bias", NULL, "Int Mic"}, - {"MICN", NULL, "Mic Bias"}, - {"MICP", NULL, "Mic Bias"}, -}; - - - -static int playpaq_wm8510_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - int i; - - /* - * Add DAPM widgets - */ - for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++) - snd_soc_dapm_new_control(dapm, &playpaq_dapm_widgets[i]); - - - - /* - * Setup audio path interconnects - */ - snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon)); - - - - /* always connected pins */ - snd_soc_dapm_enable_pin(dapm, "Int Mic"); - snd_soc_dapm_enable_pin(dapm, "Ext Spk"); - - - - /* Make CSB show PLL rate */ - snd_soc_dai_set_clkdiv(rtd->codec_dai, WM8510_OPCLKDIV, - WM8510_OPCLKDIV_1 | 4); - - return 0; -} - - - -static struct snd_soc_dai_link playpaq_wm8510_dai = { - .name = "WM8510", - .stream_name = "WM8510 PCM", - .cpu_dai_name= "atmel-ssc-dai.0", - .platform_name = "atmel-pcm-audio", - .codec_name = "wm8510-codec.0-0x1a", - .codec_dai_name = "wm8510-hifi", - .init = playpaq_wm8510_init, - .ops = &playpaq_wm8510_ops, -}; - - - -static struct snd_soc_card snd_soc_playpaq = { - .name = "LRS_PlayPaq_WM8510", - .dai_link = &playpaq_wm8510_dai, - .num_links = 1, -}; - -static struct platform_device *playpaq_snd_device; - - -static int __init playpaq_asoc_init(void) -{ - int ret = 0; - - /* - * Configure MCLK for WM8510 - */ - _gclk0 = clk_get(NULL, "gclk0"); - if (IS_ERR(_gclk0)) { - _gclk0 = NULL; - ret = PTR_ERR(_gclk0); - goto err_gclk0; - } - _pll0 = clk_get(NULL, "pll0"); - if (IS_ERR(_pll0)) { - _pll0 = NULL; - ret = PTR_ERR(_pll0); - goto err_pll0; - } - ret = clk_set_parent(_gclk0, _pll0); - if (ret) { - pr_warning("snd-soc-playpaq: " - "Failed to set PLL0 as parent for DAC clock\n"); - goto err_set_clk; - } - clk_set_rate(CODEC_CLK, 12000000); - clk_enable(CODEC_CLK); - -#if defined CONFIG_AT32_ENHANCED_PORTMUX - at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0); -#endif - - - /* - * Create and register platform device - */ - playpaq_snd_device = platform_device_alloc("soc-audio", 0); - if (playpaq_snd_device == NULL) { - ret = -ENOMEM; - goto err_device_alloc; - } - - platform_set_drvdata(playpaq_snd_device, &snd_soc_playpaq); - - ret = platform_device_add(playpaq_snd_device); - if (ret) { - pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n", - ret); - goto err_device_add; - } - - return 0; - - -err_device_add: - if (playpaq_snd_device != NULL) { - platform_device_put(playpaq_snd_device); - playpaq_snd_device = NULL; - } -err_device_alloc: -err_set_clk: - if (_pll0 != NULL) { - clk_put(_pll0); - _pll0 = NULL; - } -err_pll0: - if (_gclk0 != NULL) { - clk_put(_gclk0); - _gclk0 = NULL; - } - return ret; -} - - -static void __exit playpaq_asoc_exit(void) -{ - if (_gclk0 != NULL) { - clk_put(_gclk0); - _gclk0 = NULL; - } - if (_pll0 != NULL) { - clk_put(_pll0); - _pll0 = NULL; - } - -#if defined CONFIG_AT32_ENHANCED_PORTMUX - at32_free_pin(MCLK_PIN); -#endif - - platform_device_unregister(playpaq_snd_device); - playpaq_snd_device = NULL; -} - -module_init(playpaq_asoc_init); -module_exit(playpaq_asoc_exit); - -MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>"); -MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ad1836.h b/sound/soc/codecs/ad1836.h index 444747f0db26..dd7be0dbbc58 100644 --- a/sound/soc/codecs/ad1836.h +++ b/sound/soc/codecs/ad1836.h @@ -34,7 +34,7 @@ #define AD1836_ADC_CTRL2 13 #define AD1836_ADC_WORD_LEN_MASK 0x30 -#define AD1836_ADC_WORD_OFFSET 5 +#define AD1836_ADC_WORD_OFFSET 4 #define AD1836_ADC_SERFMT_MASK (7 << 6) #define AD1836_ADC_SERFMT_PCK256 (0x4 << 6) #define AD1836_ADC_SERFMT_PCK128 (0x5 << 6) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index f1f237ecec2a..73f46eb459f1 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -601,7 +601,6 @@ static int cs4270_soc_suspend(struct snd_soc_codec *codec, pm_message_t mesg) static int cs4270_soc_resume(struct snd_soc_codec *codec) { struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); - struct i2c_client *i2c_client = to_i2c_client(codec->dev); int reg; regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies), @@ -612,14 +611,7 @@ static int cs4270_soc_resume(struct snd_soc_codec *codec) ndelay(500); /* first restore the entire register cache ... */ - for (reg = CS4270_FIRSTREG; reg <= CS4270_LASTREG; reg++) { - u8 val = snd_soc_read(codec, reg); - - if (i2c_smbus_write_byte_data(i2c_client, reg, val)) { - dev_err(codec->dev, "i2c write failed\n"); - return -EIO; - } - } + snd_soc_cache_sync(codec); /* ... then disable the power-down bits */ reg = snd_soc_read(codec, CS4270_PWRCTL); diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c index 8c3c8205d19e..1ee66361f61b 100644 --- a/sound/soc/codecs/cs42l51.c +++ b/sound/soc/codecs/cs42l51.c @@ -555,7 +555,7 @@ static int cs42l51_probe(struct snd_soc_codec *codec) static struct snd_soc_codec_driver soc_codec_device_cs42l51 = { .probe = cs42l51_probe, - .reg_cache_size = CS42L51_NUMREGS, + .reg_cache_size = CS42L51_NUMREGS + 1, .reg_word_size = sizeof(u8), }; diff --git a/sound/soc/codecs/max9877.c b/sound/soc/codecs/max9877.c index 9e7e964a5fa3..dcf6f2a1600a 100644 --- a/sound/soc/codecs/max9877.c +++ b/sound/soc/codecs/max9877.c @@ -106,13 +106,13 @@ static int max9877_set_2reg(struct snd_kcontrol *kcontrol, unsigned int mask = mc->max; unsigned int val = (ucontrol->value.integer.value[0] & mask); unsigned int val2 = (ucontrol->value.integer.value[1] & mask); - unsigned int change = 1; + unsigned int change = 0; - if (((max9877_regs[reg] >> shift) & mask) == val) - change = 0; + if (((max9877_regs[reg] >> shift) & mask) != val) + change = 1; - if (((max9877_regs[reg2] >> shift) & mask) == val2) - change = 0; + if (((max9877_regs[reg2] >> shift) & mask) != val2) + change = 1; if (change) { max9877_regs[reg] &= ~(mask << shift); diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 9c982e47eb99..6c2988549003 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -2357,6 +2357,11 @@ static int wm8994_hw_params(struct snd_pcm_substream *substream, bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT; lrclk = bclk_rate / params_rate(params); + if (!lrclk) { + dev_err(dai->dev, "Unable to generate LRCLK from %dHz BCLK\n", + bclk_rate); + return -EINVAL; + } dev_dbg(dai->dev, "Using LRCLK rate %d for actual LRCLK %dHz\n", lrclk, bclk_rate / lrclk); @@ -3178,6 +3183,8 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) switch (wm8994->revision) { case 0: case 1: + case 2: + case 3: wm8994->hubs.dcs_codes_l = -9; wm8994->hubs.dcs_codes_r = -5; break; diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index 31af405bda84..ae49f1c78c6d 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -392,7 +392,8 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) } if (strcasecmp(sprop, "i2s-slave") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_I2S; + machine_data->dai_format = + SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; @@ -409,31 +410,38 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) } machine_data->clk_frequency = be32_to_cpup(iprop); } else if (strcasecmp(sprop, "i2s-master") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_I2S; + machine_data->dai_format = + SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "lj-slave") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J; + machine_data->dai_format = + SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "lj-master") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J; + machine_data->dai_format = + SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBS_CFS; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "rj-slave") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J; + machine_data->dai_format = + SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBM_CFM; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "rj-master") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J; + machine_data->dai_format = + SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBS_CFS; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "ac97-slave") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_AC97; + machine_data->dai_format = + SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBM_CFM; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "ac97-master") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_AC97; + machine_data->dai_format = + SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBS_CFS; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else { diff --git a/sound/soc/samsung/smdk_wm8994.c b/sound/soc/samsung/smdk_wm8994.c index f75e43997d5b..ad9ac42522e2 100644 --- a/sound/soc/samsung/smdk_wm8994.c +++ b/sound/soc/samsung/smdk_wm8994.c @@ -9,6 +9,7 @@ #include "../codecs/wm8994.h" #include <sound/pcm_params.h> +#include <linux/module.h> /* * Default CFG switch settings to use this driver: diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c index 85bf541a771d..4b8e35410eb1 100644 --- a/sound/soc/samsung/speyside.c +++ b/sound/soc/samsung/speyside.c @@ -191,7 +191,7 @@ static int speyside_late_probe(struct snd_soc_card *card) snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic"); snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC"); snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC"); - snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker"); + snd_soc_dapm_ignore_suspend(&card->dapm, "Main Speaker"); snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output"); snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input"); diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index a5d3685a5d38..a25fa63ce9a2 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -709,6 +709,12 @@ int snd_soc_resume(struct device *dev) struct snd_soc_card *card = dev_get_drvdata(dev); int i, ac97_control = 0; + /* If the initialization of this soc device failed, there is no codec + * associated with it. Just bail out in this case. + */ + if (list_empty(&card->codec_dev_list)) + return 0; + /* AC97 devices might have other drivers hanging off them so * need to resume immediately. Other drivers don't have that * problem and may take a substantial amount of time to resume |
