summaryrefslogtreecommitdiffstats
path: root/sound/soc/pxa/pxa-ssp.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/pxa/pxa-ssp.c')
-rw-r--r--sound/soc/pxa/pxa-ssp.c24
1 files changed, 13 insertions, 11 deletions
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 9e95e5117c88..544fd9566f4d 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -121,10 +122,9 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream,
ssp_disable(ssp);
}
- if (cpu_dai->dma_data) {
- kfree(cpu_dai->dma_data);
- cpu_dai->dma_data = NULL;
- }
+ kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
+ snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
+
return ret;
}
@@ -141,10 +141,8 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
clk_disable(ssp->clk);
}
- if (cpu_dai->dma_data) {
- kfree(cpu_dai->dma_data);
- cpu_dai->dma_data = NULL;
- }
+ kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
+ snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
}
#ifdef CONFIG_PM
@@ -569,19 +567,23 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
u32 sspsp;
int width = snd_pcm_format_physical_width(params_format(params));
int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf;
+ struct pxa2xx_pcm_dma_params *dma_data;
+
+ dma_data = snd_soc_dai_get_dma_data(dai, substream);
/* generate correct DMA params */
- if (cpu_dai->dma_data)
- kfree(cpu_dai->dma_data);
+ kfree(dma_data);
/* Network mode with one active slot (ttsa == 1) can be used
* to force 16-bit frame width on the wire (for S16_LE), even
* with two channels. Use 16-bit DMA transfers for this case.
*/
- cpu_dai->dma_data = ssp_get_dma_params(ssp,
+ dma_data = ssp_get_dma_params(ssp,
((chn == 2) && (ttsa != 1)) || (width == 32),
substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ snd_soc_dai_set_dma_data(dai, substream, dma_data);
+
/* we can only change the settings if the port is not in use */
if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
return 0;
OpenPOWER on IntegriCloud