diff options
Diffstat (limited to 'sound/soc/codecs')
| -rw-r--r-- | sound/soc/codecs/wm8903.c | 123 | ||||
| -rw-r--r-- | sound/soc/codecs/wm8903.h | 8 |
2 files changed, 127 insertions, 4 deletions
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index 119abceb1d85..2f912276a8f5 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -223,6 +223,9 @@ struct wm8903_priv { int fs; int deemph; + int dcs_pending; + int dcs_cache[4]; + /* Reference count */ int class_w_users; @@ -248,6 +251,10 @@ static int wm8903_volatile_register(struct snd_soc_codec *codec, unsigned int re case WM8903_WRITE_SEQUENCER_4: case WM8903_POWER_MANAGEMENT_3: case WM8903_POWER_MANAGEMENT_2: + case WM8903_DC_SERVO_READBACK_1: + case WM8903_DC_SERVO_READBACK_2: + case WM8903_DC_SERVO_READBACK_3: + case WM8903_DC_SERVO_READBACK_4: return 1; default: @@ -315,6 +322,103 @@ static int wm8903_cp_event(struct snd_soc_dapm_widget *w, return 0; } +static int wm8903_dcs_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + wm8903->dcs_pending |= 1 << w->shift; + break; + case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(codec, WM8903_DC_SERVO_0, + 1 << w->shift, 0); + break; + } + + return 0; +} + +#define WM8903_DCS_MODE_WRITE_STOP 0 +#define WM8903_DCS_MODE_START_STOP 2 + +static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm, + enum snd_soc_dapm_type event, int subseq) +{ + struct snd_soc_codec *codec = container_of(dapm, + struct snd_soc_codec, dapm); + struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); + int dcs_mode = WM8903_DCS_MODE_WRITE_STOP; + int i, val; + + /* Complete any pending DC servo starts */ + if (wm8903->dcs_pending) { + dev_dbg(codec->dev, "Starting DC servo for %x\n", + wm8903->dcs_pending); + + /* If we've no cached values then we need to do startup */ + for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) { + if (!(wm8903->dcs_pending & (1 << i))) + continue; + + if (wm8903->dcs_cache[i]) { + dev_dbg(codec->dev, + "Restore DC servo %d value %x\n", + 3 - i, wm8903->dcs_cache[i]); + + snd_soc_write(codec, WM8903_DC_SERVO_4 + i, + wm8903->dcs_cache[i] & 0xff); + } else { + dev_dbg(codec->dev, + "Calibrate DC servo %d\n", 3 - i); + dcs_mode = WM8903_DCS_MODE_START_STOP; + } + } + + /* Don't trust the cache for analogue */ + if (wm8903->class_w_users) + dcs_mode = WM8903_DCS_MODE_START_STOP; + + snd_soc_update_bits(codec, WM8903_DC_SERVO_2, + WM8903_DCS_MODE_MASK, dcs_mode); + + snd_soc_update_bits(codec, WM8903_DC_SERVO_0, + WM8903_DCS_ENA_MASK, wm8903->dcs_pending); + + switch (dcs_mode) { + case WM8903_DCS_MODE_WRITE_STOP: + break; + + case WM8903_DCS_MODE_START_STOP: + msleep(270); + + /* Cache the measured offsets for digital */ + if (wm8903->class_w_users) + break; + + for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) { + if (!(wm8903->dcs_pending & (1 << i))) + continue; + + val = snd_soc_read(codec, + WM8903_DC_SERVO_READBACK_1 + i); + dev_dbg(codec->dev, "DC servo %d: %x\n", + 3 - i, val); + wm8903->dcs_cache[i] = val; + } + break; + + default: + pr_warn("DCS mode %d delay not set\n", dcs_mode); + break; + } + + wm8903->dcs_pending = 0; + } +} + /* * When used with DAC outputs only the WM8903 charge pump supports * operation in class W mode, providing very low power consumption @@ -847,10 +951,15 @@ SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 2, 0, SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 1, WM8903_ANALOGUE_LINEOUT_0, 1, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPL_DCS", 3, WM8903_DC_SERVO_0, 3, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPR_DCS", 3, WM8903_DC_SERVO_0, 2, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("LINEOUTL_DCS", 3, WM8903_DC_SERVO_0, 1, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("LINEOUTR_DCS", 3, WM8903_DC_SERVO_0, 0, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("DCS Master", WM8903_DC_SERVO_0, 4, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPL_DCS", 3, SND_SOC_NOPM, 3, 0, wm8903_dcs_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), +SND_SOC_DAPM_PGA_S("HPR_DCS", 3, SND_SOC_NOPM, 2, 0, wm8903_dcs_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), +SND_SOC_DAPM_PGA_S("LINEOUTL_DCS", 3, SND_SOC_NOPM, 1, 0, wm8903_dcs_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), +SND_SOC_DAPM_PGA_S("LINEOUTR_DCS", 3, SND_SOC_NOPM, 0, 0, wm8903_dcs_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0, NULL, 0), @@ -979,6 +1088,11 @@ static const struct snd_soc_dapm_route intercon[] = { { "LINEOUTL_ENA_DLY", NULL, "Left Line Output PGA" }, { "LINEOUTR_ENA_DLY", NULL, "Right Line Output PGA" }, + { "HPL_DCS", NULL, "DCS Master" }, + { "HPR_DCS", NULL, "DCS Master" }, + { "LINEOUTL_DCS", NULL, "DCS Master" }, + { "LINEOUTR_DCS", NULL, "DCS Master" }, + { "HPL_DCS", NULL, "HPL_ENA_DLY" }, { "HPR_DCS", NULL, "HPR_ENA_DLY" }, { "LINEOUTL_DCS", NULL, "LINEOUTL_ENA_DLY" }, @@ -1901,6 +2015,7 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8903 = { .reg_word_size = sizeof(u16), .reg_cache_default = wm8903_reg_defaults, .volatile_register = wm8903_volatile_register, + .seq_notifier = wm8903_seq_notifier, }; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) diff --git a/sound/soc/codecs/wm8903.h b/sound/soc/codecs/wm8903.h index e8490f3edd03..9ef394ae0dd3 100644 --- a/sound/soc/codecs/wm8903.h +++ b/sound/soc/codecs/wm8903.h @@ -75,6 +75,14 @@ extern int wm8903_mic_detect(struct snd_soc_codec *codec, #define WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0 0x41 #define WM8903_DC_SERVO_0 0x43 #define WM8903_DC_SERVO_2 0x45 +#define WM8903_DC_SERVO_4 0x47 +#define WM8903_DC_SERVO_5 0x48 +#define WM8903_DC_SERVO_6 0x49 +#define WM8903_DC_SERVO_7 0x4A +#define WM8903_DC_SERVO_READBACK_1 0x51 +#define WM8903_DC_SERVO_READBACK_2 0x52 +#define WM8903_DC_SERVO_READBACK_3 0x53 +#define WM8903_DC_SERVO_READBACK_4 0x54 #define WM8903_ANALOGUE_HP_0 0x5A #define WM8903_ANALOGUE_LINEOUT_0 0x5E #define WM8903_CHARGE_PUMP_0 0x62 |
