diff options
Diffstat (limited to 'sound/soc/codecs/wm8993.c')
| -rw-r--r-- | sound/soc/codecs/wm8993.c | 649 |
1 files changed, 427 insertions, 222 deletions
diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c index 7c7fd925db8d..d256a9340644 100644 --- a/sound/soc/codecs/wm8993.c +++ b/sound/soc/codecs/wm8993.c @@ -16,6 +16,7 @@ #include <linux/delay.h> #include <linux/pm.h> #include <linux/i2c.h> +#include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/spi/spi.h> #include <linux/slab.h> @@ -40,134 +41,113 @@ static const char *wm8993_supply_names[WM8993_NUM_SUPPLIES] = { "SPKVDD", }; -static u16 wm8993_reg_defaults[WM8993_REGISTER_COUNT] = { - 0x8993, /* R0 - Software Reset */ - 0x0000, /* R1 - Power Management (1) */ - 0x6000, /* R2 - Power Management (2) */ - 0x0000, /* R3 - Power Management (3) */ - 0x4050, /* R4 - Audio Interface (1) */ - 0x4000, /* R5 - Audio Interface (2) */ - 0x01C8, /* R6 - Clocking 1 */ - 0x0000, /* R7 - Clocking 2 */ - 0x0000, /* R8 - Audio Interface (3) */ - 0x0040, /* R9 - Audio Interface (4) */ - 0x0004, /* R10 - DAC CTRL */ - 0x00C0, /* R11 - Left DAC Digital Volume */ - 0x00C0, /* R12 - Right DAC Digital Volume */ - 0x0000, /* R13 - Digital Side Tone */ - 0x0300, /* R14 - ADC CTRL */ - 0x00C0, /* R15 - Left ADC Digital Volume */ - 0x00C0, /* R16 - Right ADC Digital Volume */ - 0x0000, /* R17 */ - 0x0000, /* R18 - GPIO CTRL 1 */ - 0x0010, /* R19 - GPIO1 */ - 0x0000, /* R20 - IRQ_DEBOUNCE */ - 0x0000, /* R21 */ - 0x8000, /* R22 - GPIOCTRL 2 */ - 0x0800, /* R23 - GPIO_POL */ - 0x008B, /* R24 - Left Line Input 1&2 Volume */ - 0x008B, /* R25 - Left Line Input 3&4 Volume */ - 0x008B, /* R26 - Right Line Input 1&2 Volume */ - 0x008B, /* R27 - Right Line Input 3&4 Volume */ - 0x006D, /* R28 - Left Output Volume */ - 0x006D, /* R29 - Right Output Volume */ - 0x0066, /* R30 - Line Outputs Volume */ - 0x0020, /* R31 - HPOUT2 Volume */ - 0x0079, /* R32 - Left OPGA Volume */ - 0x0079, /* R33 - Right OPGA Volume */ - 0x0003, /* R34 - SPKMIXL Attenuation */ - 0x0003, /* R35 - SPKMIXR Attenuation */ - 0x0011, /* R36 - SPKOUT Mixers */ - 0x0100, /* R37 - SPKOUT Boost */ - 0x0079, /* R38 - Speaker Volume Left */ - 0x0079, /* R39 - Speaker Volume Right */ - 0x0000, /* R40 - Input Mixer2 */ - 0x0000, /* R41 - Input Mixer3 */ - 0x0000, /* R42 - Input Mixer4 */ - 0x0000, /* R43 - Input Mixer5 */ - 0x0000, /* R44 - Input Mixer6 */ - 0x0000, /* R45 - Output Mixer1 */ - 0x0000, /* R46 - Output Mixer2 */ - 0x0000, /* R47 - Output Mixer3 */ - 0x0000, /* R48 - Output Mixer4 */ - 0x0000, /* R49 - Output Mixer5 */ - 0x0000, /* R50 - Output Mixer6 */ - 0x0000, /* R51 - HPOUT2 Mixer */ - 0x0000, /* R52 - Line Mixer1 */ - 0x0000, /* R53 - Line Mixer2 */ - 0x0000, /* R54 - Speaker Mixer */ - 0x0000, /* R55 - Additional Control */ - 0x0000, /* R56 - AntiPOP1 */ - 0x0000, /* R57 - AntiPOP2 */ - 0x0000, /* R58 - MICBIAS */ - 0x0000, /* R59 */ - 0x0000, /* R60 - FLL Control 1 */ - 0x0000, /* R61 - FLL Control 2 */ - 0x0000, /* R62 - FLL Control 3 */ - 0x2EE0, /* R63 - FLL Control 4 */ - 0x0002, /* R64 - FLL Control 5 */ - 0x2287, /* R65 - Clocking 3 */ - 0x025F, /* R66 - Clocking 4 */ - 0x0000, /* R67 - MW Slave Control */ - 0x0000, /* R68 */ - 0x0002, /* R69 - Bus Control 1 */ - 0x0000, /* R70 - Write Sequencer 0 */ - 0x0000, /* R71 - Write Sequencer 1 */ - 0x0000, /* R72 - Write Sequencer 2 */ - 0x0000, /* R73 - Write Sequencer 3 */ - 0x0000, /* R74 - Write Sequencer 4 */ - 0x0000, /* R75 - Write Sequencer 5 */ - 0x1F25, /* R76 - Charge Pump 1 */ - 0x0000, /* R77 */ - 0x0000, /* R78 */ - 0x0000, /* R79 */ - 0x0000, /* R80 */ - 0x0000, /* R81 - Class W 0 */ - 0x0000, /* R82 */ - 0x0000, /* R83 */ - 0x0000, /* R84 - DC Servo 0 */ - 0x054A, /* R85 - DC Servo 1 */ - 0x0000, /* R86 */ - 0x0000, /* R87 - DC Servo 3 */ - 0x0000, /* R88 - DC Servo Readback 0 */ - 0x0000, /* R89 - DC Servo Readback 1 */ - 0x0000, /* R90 - DC Servo Readback 2 */ - 0x0000, /* R91 */ - 0x0000, /* R92 */ - 0x0000, /* R93 */ - 0x0000, /* R94 */ - 0x0000, /* R95 */ - 0x0100, /* R96 - Analogue HP 0 */ - 0x0000, /* R97 */ - 0x0000, /* R98 - EQ1 */ - 0x000C, /* R99 - EQ2 */ - 0x000C, /* R100 - EQ3 */ - 0x000C, /* R101 - EQ4 */ - 0x000C, /* R102 - EQ5 */ - 0x000C, /* R103 - EQ6 */ - 0x0FCA, /* R104 - EQ7 */ - 0x0400, /* R105 - EQ8 */ - 0x00D8, /* R106 - EQ9 */ - 0x1EB5, /* R107 - EQ10 */ - 0xF145, /* R108 - EQ11 */ - 0x0B75, /* R109 - EQ12 */ - 0x01C5, /* R110 - EQ13 */ - 0x1C58, /* R111 - EQ14 */ - 0xF373, /* R112 - EQ15 */ - 0x0A54, /* R113 - EQ16 */ - 0x0558, /* R114 - EQ17 */ - 0x168E, /* R115 - EQ18 */ - 0xF829, /* R116 - EQ19 */ - 0x07AD, /* R117 - EQ20 */ - 0x1103, /* R118 - EQ21 */ - 0x0564, /* R119 - EQ22 */ - 0x0559, /* R120 - EQ23 */ - 0x4000, /* R121 - EQ24 */ - 0x0000, /* R122 - Digital Pulls */ - 0x0F08, /* R123 - DRC Control 1 */ - 0x0000, /* R124 - DRC Control 2 */ - 0x0080, /* R125 - DRC Control 3 */ - 0x0000, /* R126 - DRC Control 4 */ +static struct reg_default wm8993_reg_defaults[] = { + { 1, 0x0000 }, /* R1 - Power Management (1) */ + { 2, 0x6000 }, /* R2 - Power Management (2) */ + { 3, 0x0000 }, /* R3 - Power Management (3) */ + { 4, 0x4050 }, /* R4 - Audio Interface (1) */ + { 5, 0x4000 }, /* R5 - Audio Interface (2) */ + { 6, 0x01C8 }, /* R6 - Clocking 1 */ + { 7, 0x0000 }, /* R7 - Clocking 2 */ + { 8, 0x0000 }, /* R8 - Audio Interface (3) */ + { 9, 0x0040 }, /* R9 - Audio Interface (4) */ + { 10, 0x0004 }, /* R10 - DAC CTRL */ + { 11, 0x00C0 }, /* R11 - Left DAC Digital Volume */ + { 12, 0x00C0 }, /* R12 - Right DAC Digital Volume */ + { 13, 0x0000 }, /* R13 - Digital Side Tone */ + { 14, 0x0300 }, /* R14 - ADC CTRL */ + { 15, 0x00C0 }, /* R15 - Left ADC Digital Volume */ + { 16, 0x00C0 }, /* R16 - Right ADC Digital Volume */ + { 18, 0x0000 }, /* R18 - GPIO CTRL 1 */ + { 19, 0x0010 }, /* R19 - GPIO1 */ + { 20, 0x0000 }, /* R20 - IRQ_DEBOUNCE */ + { 21, 0x0000 }, /* R21 - Inputs Clamp */ + { 22, 0x8000 }, /* R22 - GPIOCTRL 2 */ + { 23, 0x0800 }, /* R23 - GPIO_POL */ + { 24, 0x008B }, /* R24 - Left Line Input 1&2 Volume */ + { 25, 0x008B }, /* R25 - Left Line Input 3&4 Volume */ + { 26, 0x008B }, /* R26 - Right Line Input 1&2 Volume */ + { 27, 0x008B }, /* R27 - Right Line Input 3&4 Volume */ + { 28, 0x006D }, /* R28 - Left Output Volume */ + { 29, 0x006D }, /* R29 - Right Output Volume */ + { 30, 0x0066 }, /* R30 - Line Outputs Volume */ + { 31, 0x0020 }, /* R31 - HPOUT2 Volume */ + { 32, 0x0079 }, /* R32 - Left OPGA Volume */ + { 33, 0x0079 }, /* R33 - Right OPGA Volume */ + { 34, 0x0003 }, /* R34 - SPKMIXL Attenuation */ + { 35, 0x0003 }, /* R35 - SPKMIXR Attenuation */ + { 36, 0x0011 }, /* R36 - SPKOUT Mixers */ + { 37, 0x0100 }, /* R37 - SPKOUT Boost */ + { 38, 0x0079 }, /* R38 - Speaker Volume Left */ + { 39, 0x0079 }, /* R39 - Speaker Volume Right */ + { 40, 0x0000 }, /* R40 - Input Mixer2 */ + { 41, 0x0000 }, /* R41 - Input Mixer3 */ + { 42, 0x0000 }, /* R42 - Input Mixer4 */ + { 43, 0x0000 }, /* R43 - Input Mixer5 */ + { 44, 0x0000 }, /* R44 - Input Mixer6 */ + { 45, 0x0000 }, /* R45 - Output Mixer1 */ + { 46, 0x0000 }, /* R46 - Output Mixer2 */ + { 47, 0x0000 }, /* R47 - Output Mixer3 */ + { 48, 0x0000 }, /* R48 - Output Mixer4 */ + { 49, 0x0000 }, /* R49 - Output Mixer5 */ + { 50, 0x0000 }, /* R50 - Output Mixer6 */ + { 51, 0x0000 }, /* R51 - HPOUT2 Mixer */ + { 52, 0x0000 }, /* R52 - Line Mixer1 */ + { 53, 0x0000 }, /* R53 - Line Mixer2 */ + { 54, 0x0000 }, /* R54 - Speaker Mixer */ + { 55, 0x0000 }, /* R55 - Additional Control */ + { 56, 0x0000 }, /* R56 - AntiPOP1 */ + { 57, 0x0000 }, /* R57 - AntiPOP2 */ + { 58, 0x0000 }, /* R58 - MICBIAS */ + { 60, 0x0000 }, /* R60 - FLL Control 1 */ + { 61, 0x0000 }, /* R61 - FLL Control 2 */ + { 62, 0x0000 }, /* R62 - FLL Control 3 */ + { 63, 0x2EE0 }, /* R63 - FLL Control 4 */ + { 64, 0x0002 }, /* R64 - FLL Control 5 */ + { 65, 0x2287 }, /* R65 - Clocking 3 */ + { 66, 0x025F }, /* R66 - Clocking 4 */ + { 67, 0x0000 }, /* R67 - MW Slave Control */ + { 69, 0x0002 }, /* R69 - Bus Control 1 */ + { 70, 0x0000 }, /* R70 - Write Sequencer 0 */ + { 71, 0x0000 }, /* R71 - Write Sequencer 1 */ + { 72, 0x0000 }, /* R72 - Write Sequencer 2 */ + { 73, 0x0000 }, /* R73 - Write Sequencer 3 */ + { 74, 0x0000 }, /* R74 - Write Sequencer 4 */ + { 75, 0x0000 }, /* R75 - Write Sequencer 5 */ + { 76, 0x1F25 }, /* R76 - Charge Pump 1 */ + { 81, 0x0000 }, /* R81 - Class W 0 */ + { 85, 0x054A }, /* R85 - DC Servo 1 */ + { 87, 0x0000 }, /* R87 - DC Servo 3 */ + { 96, 0x0100 }, /* R96 - Analogue HP 0 */ + { 98, 0x0000 }, /* R98 - EQ1 */ + { 99, 0x000C }, /* R99 - EQ2 */ + { 100, 0x000C }, /* R100 - EQ3 */ + { 101, 0x000C }, /* R101 - EQ4 */ + { 102, 0x000C }, /* R102 - EQ5 */ + { 103, 0x000C }, /* R103 - EQ6 */ + { 104, 0x0FCA }, /* R104 - EQ7 */ + { 105, 0x0400 }, /* R105 - EQ8 */ + { 106, 0x00D8 }, /* R106 - EQ9 */ + { 107, 0x1EB5 }, /* R107 - EQ10 */ + { 108, 0xF145 }, /* R108 - EQ11 */ + { 109, 0x0B75 }, /* R109 - EQ12 */ + { 110, 0x01C5 }, /* R110 - EQ13 */ + { 111, 0x1C58 }, /* R111 - EQ14 */ + { 112, 0xF373 }, /* R112 - EQ15 */ + { 113, 0x0A54 }, /* R113 - EQ16 */ + { 114, 0x0558 }, /* R114 - EQ17 */ + { 115, 0x168E }, /* R115 - EQ18 */ + { 116, 0xF829 }, /* R116 - EQ19 */ + { 117, 0x07AD }, /* R117 - EQ20 */ + { 118, 0x1103 }, /* R118 - EQ21 */ + { 119, 0x0564 }, /* R119 - EQ22 */ + { 120, 0x0559 }, /* R120 - EQ23 */ + { 121, 0x4000 }, /* R121 - EQ24 */ + { 122, 0x0000 }, /* R122 - Digital Pulls */ + { 123, 0x0F08 }, /* R123 - DRC Control 1 */ + { 124, 0x0000 }, /* R124 - DRC Control 2 */ + { 125, 0x0080 }, /* R125 - DRC Control 3 */ + { 126, 0x0000 }, /* R126 - DRC Control 4 */ }; static struct { @@ -225,9 +205,11 @@ static struct { struct wm8993_priv { struct wm_hubs_data hubs_data; + struct device *dev; + struct regmap *regmap; struct regulator_bulk_data supplies[WM8993_NUM_SUPPLIES]; struct wm8993_platform_data pdata; - enum snd_soc_control_type control_type; + struct completion fll_lock; int master; int sysclk_source; int tdm_slots; @@ -242,17 +224,137 @@ struct wm8993_priv { int fll_src; }; -static int wm8993_volatile(struct snd_soc_codec *codec, unsigned int reg) +static bool wm8993_volatile(struct device *dev, unsigned int reg) { switch (reg) { case WM8993_SOFTWARE_RESET: + case WM8993_GPIO_CTRL_1: case WM8993_DC_SERVO_0: case WM8993_DC_SERVO_READBACK_0: case WM8993_DC_SERVO_READBACK_1: case WM8993_DC_SERVO_READBACK_2: - return 1; + return true; default: - return 0; + return false; + } +} + +static bool wm8993_readable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case WM8993_SOFTWARE_RESET: + case WM8993_POWER_MANAGEMENT_1: + case WM8993_POWER_MANAGEMENT_2: + case WM8993_POWER_MANAGEMENT_3: + case WM8993_AUDIO_INTERFACE_1: + case WM8993_AUDIO_INTERFACE_2: + case WM8993_CLOCKING_1: + case WM8993_CLOCKING_2: + case WM8993_AUDIO_INTERFACE_3: + case WM8993_AUDIO_INTERFACE_4: + case WM8993_DAC_CTRL: + case WM8993_LEFT_DAC_DIGITAL_VOLUME: + case WM8993_RIGHT_DAC_DIGITAL_VOLUME: + case WM8993_DIGITAL_SIDE_TONE: + case WM8993_ADC_CTRL: + case WM8993_LEFT_ADC_DIGITAL_VOLUME: + case WM8993_RIGHT_ADC_DIGITAL_VOLUME: + case WM8993_GPIO_CTRL_1: + case WM8993_GPIO1: + case WM8993_IRQ_DEBOUNCE: + case WM8993_GPIOCTRL_2: + case WM8993_GPIO_POL: + case WM8993_LEFT_LINE_INPUT_1_2_VOLUME: + case WM8993_LEFT_LINE_INPUT_3_4_VOLUME: + case WM8993_RIGHT_LINE_INPUT_1_2_VOLUME: + case WM8993_RIGHT_LINE_INPUT_3_4_VOLUME: + case WM8993_LEFT_OUTPUT_VOLUME: + case WM8993_RIGHT_OUTPUT_VOLUME: + case WM8993_LINE_OUTPUTS_VOLUME: + case WM8993_HPOUT2_VOLUME: + case WM8993_LEFT_OPGA_VOLUME: + case WM8993_RIGHT_OPGA_VOLUME: + case WM8993_SPKMIXL_ATTENUATION: + case WM8993_SPKMIXR_ATTENUATION: + case WM8993_SPKOUT_MIXERS: + case WM8993_SPKOUT_BOOST: + case WM8993_SPEAKER_VOLUME_LEFT: + case WM8993_SPEAKER_VOLUME_RIGHT: + case WM8993_INPUT_MIXER2: + case WM8993_INPUT_MIXER3: + case WM8993_INPUT_MIXER4: + case WM8993_INPUT_MIXER5: + case WM8993_INPUT_MIXER6: + case WM8993_OUTPUT_MIXER1: + case WM8993_OUTPUT_MIXER2: + case WM8993_OUTPUT_MIXER3: + case WM8993_OUTPUT_MIXER4: + case WM8993_OUTPUT_MIXER5: + case WM8993_OUTPUT_MIXER6: + case WM8993_HPOUT2_MIXER: + case WM8993_LINE_MIXER1: + case WM8993_LINE_MIXER2: + case WM8993_SPEAKER_MIXER: + case WM8993_ADDITIONAL_CONTROL: + case WM8993_ANTIPOP1: + case WM8993_ANTIPOP2: + case WM8993_MICBIAS: + case WM8993_FLL_CONTROL_1: + case WM8993_FLL_CONTROL_2: + case WM8993_FLL_CONTROL_3: + case WM8993_FLL_CONTROL_4: + case WM8993_FLL_CONTROL_5: + case WM8993_CLOCKING_3: + case WM8993_CLOCKING_4: + case WM8993_MW_SLAVE_CONTROL: + case WM8993_BUS_CONTROL_1: + case WM8993_WRITE_SEQUENCER_0: + case WM8993_WRITE_SEQUENCER_1: + case WM8993_WRITE_SEQUENCER_2: + case WM8993_WRITE_SEQUENCER_3: + case WM8993_WRITE_SEQUENCER_4: + case WM8993_WRITE_SEQUENCER_5: + case WM8993_CHARGE_PUMP_1: + case WM8993_CLASS_W_0: + case WM8993_DC_SERVO_0: + case WM8993_DC_SERVO_1: + case WM8993_DC_SERVO_3: + case WM8993_DC_SERVO_READBACK_0: + case WM8993_DC_SERVO_READBACK_1: + case WM8993_DC_SERVO_READBACK_2: + case WM8993_ANALOGUE_HP_0: + case WM8993_EQ1: + case WM8993_EQ2: + case WM8993_EQ3: + case WM8993_EQ4: + case WM8993_EQ5: + case WM8993_EQ6: + case WM8993_EQ7: + case WM8993_EQ8: + case WM8993_EQ9: + case WM8993_EQ10: + case WM8993_EQ11: + case WM8993_EQ12: + case WM8993_EQ13: + case WM8993_EQ14: + case WM8993_EQ15: + case WM8993_EQ16: + case WM8993_EQ17: + case WM8993_EQ18: + case WM8993_EQ19: + case WM8993_EQ20: + case WM8993_EQ21: + case WM8993_EQ22: + case WM8993_EQ23: + case WM8993_EQ24: + case WM8993_DIGITAL_PULLS: + case WM8993_DRC_CONTROL_1: + case WM8993_DRC_CONTROL_2: + case WM8993_DRC_CONTROL_3: + case WM8993_DRC_CONTROL_4: + return true; + default: + return false; } } @@ -369,8 +471,10 @@ static int _wm8993_set_fll(struct snd_soc_codec *codec, int fll_id, int source, unsigned int Fref, unsigned int Fout) { struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec); + struct i2c_client *i2c = to_i2c_client(codec->dev); u16 reg1, reg4, reg5; struct _fll_div fll_div; + unsigned int timeout; int ret; /* Any change? */ @@ -441,14 +545,22 @@ static int _wm8993_set_fll(struct snd_soc_codec *codec, int fll_id, int source, reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT; snd_soc_write(codec, WM8993_FLL_CONTROL_5, reg5); + /* If we've got an interrupt wired up make sure we get it */ + if (i2c->irq) + timeout = msecs_to_jiffies(20); + else if (Fref < 1000000) + timeout = msecs_to_jiffies(3); + else + timeout = msecs_to_jiffies(1); + + try_wait_for_completion(&wm8993->fll_lock); + /* Enable the FLL */ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA); - /* Both overestimates */ - if (Fref < 1000000) - msleep(3); - else - msleep(1); + timeout = wait_for_completion_timeout(&wm8993->fll_lock, timeout); + if (i2c->irq && !timeout) + dev_warn(codec->dev, "Timed out waiting for FLL\n"); dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout); @@ -946,6 +1058,8 @@ static int wm8993_set_bias_level(struct snd_soc_codec *codec, struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec); int ret; + wm_hubs_set_bias_level(codec, level); + switch (level) { case SND_SOC_BIAS_ON: case SND_SOC_BIAS_PREPARE: @@ -963,12 +1077,10 @@ static int wm8993_set_bias_level(struct snd_soc_codec *codec, if (ret != 0) return ret; - snd_soc_cache_sync(codec); + regcache_cache_only(wm8993->regmap, false); + regcache_sync(wm8993->regmap); - /* Tune DC servo configuration */ - snd_soc_write(codec, 0x44, 3); - snd_soc_write(codec, 0x56, 3); - snd_soc_write(codec, 0x44, 0); + wm_hubs_vmid_ena(codec); /* Bring up VMID with fast soft start */ snd_soc_update_bits(codec, WM8993_ANTIPOP2, @@ -1024,14 +1136,8 @@ static int wm8993_set_bias_level(struct snd_soc_codec *codec, WM8993_VMID_RAMP_MASK | WM8993_BIAS_SRC, 0); -#ifdef CONFIG_REGULATOR - /* Post 2.6.34 we will be able to get a callback when - * the regulators are disabled which we can use but - * for now just assume that the power will be cut if - * the regulator API is in use. - */ - codec->cache_sync = 1; -#endif + regcache_cache_only(wm8993->regmap, true); + regcache_mark_dirty(wm8993->regmap); regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies); @@ -1378,6 +1484,45 @@ out: return 0; } +static irqreturn_t wm8993_irq(int irq, void *data) +{ + struct wm8993_priv *wm8993 = data; + int mask, val, ret; + + ret = regmap_read(wm8993->regmap, WM8993_GPIO_CTRL_1, &val); + if (ret != 0) { + dev_err(wm8993->dev, "Failed to read interrupt status: %d\n", + ret); + return IRQ_NONE; + } + + ret = regmap_read(wm8993->regmap, WM8993_GPIOCTRL_2, &mask); + if (ret != 0) { + dev_err(wm8993->dev, "Failed to read interrupt mask: %d\n", + ret); + return IRQ_NONE; + } + + /* The IRQ pin status is visible in the register too */ + val &= ~(mask | WM8993_IRQ); + if (!val) + return IRQ_NONE; + + if (val & WM8993_TEMPOK_EINT) + dev_crit(wm8993->dev, "Thermal warning\n"); + + if (val & WM8993_FLL_LOCK_EINT) { + dev_dbg(wm8993->dev, "FLL locked\n"); + complete(&wm8993->fll_lock); + } + + ret = regmap_write(wm8993->regmap, WM8993_GPIO_CTRL_1, val); + if (ret != 0) + dev_err(wm8993->dev, "Failed to ack interrupt: %d\n", ret); + + return IRQ_HANDLED; +} + static const struct snd_soc_dai_ops wm8993_ops = { .set_sysclk = wm8993_set_sysclk, .set_fmt = wm8993_set_dai_fmt, @@ -1402,6 +1547,7 @@ static struct snd_soc_dai_driver wm8993_dai = { .channels_max = 2, .rates = WM8993_RATES, .formats = WM8993_FORMATS, + .sig_bits = 24, }, .capture = { .stream_name = "Capture", @@ -1409,6 +1555,7 @@ static struct snd_soc_dai_driver wm8993_dai = { .channels_max = 2, .rates = WM8993_RATES, .formats = WM8993_FORMATS, + .sig_bits = 24, }, .ops = &wm8993_ops, .symmetric_rates = 1, @@ -1418,49 +1565,20 @@ static int wm8993_probe(struct snd_soc_codec *codec) { struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec); struct snd_soc_dapm_context *dapm = &codec->dapm; - int ret, i, val; + int ret; wm8993->hubs_data.hp_startup_mode = 1; wm8993->hubs_data.dcs_codes_l = -2; wm8993->hubs_data.dcs_codes_r = -2; wm8993->hubs_data.series_startup = 1; - ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C); + codec->control_data = wm8993->regmap; + ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_REGMAP); if (ret != 0) { dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); return ret; } - for (i = 0; i < ARRAY_SIZE(wm8993->supplies); i++) - wm8993->supplies[i].supply = wm8993_supply_names[i]; - - ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8993->supplies), - wm8993->supplies); - if (ret != 0) { - dev_err(codec->dev, "Failed to request supplies: %d\n", ret); - return ret; - } - - ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies), - wm8993->supplies); - if (ret != 0) { - dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); - goto err_get; - } - - val = snd_soc_read(codec, WM8993_SOFTWARE_RESET); - if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) { - dev_err(codec->dev, "Invalid ID register value %x\n", val); - ret = -EINVAL; - goto err_enable; - } - - ret = snd_soc_write(codec, WM8993_SOFTWARE_RESET, 0xffff); - if (ret != 0) - goto err_enable; - - codec->cache_only = 1; - /* By default we're using the output mixers */ wm8993->class_w_users = 2; @@ -1489,15 +1607,15 @@ static int wm8993_probe(struct snd_soc_codec *codec) ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY); if (ret != 0) - goto err_enable; + return ret; - snd_soc_add_controls(codec, wm8993_snd_controls, + snd_soc_add_codec_controls(codec, wm8993_snd_controls, ARRAY_SIZE(wm8993_snd_controls)); if (wm8993->pdata.num_retune_configs != 0) { dev_dbg(codec->dev, "Using ReTune Mobile\n"); } else { dev_dbg(codec->dev, "No ReTune Mobile, using normal EQ\n"); - snd_soc_add_controls(codec, wm8993_eq_controls, + snd_soc_add_codec_controls(codec, wm8993_eq_controls, ARRAY_SIZE(wm8993_eq_controls)); } @@ -1509,13 +1627,14 @@ static int wm8993_probe(struct snd_soc_codec *codec) wm_hubs_add_analogue_routes(codec, wm8993->pdata.lineout1_diff, wm8993->pdata.lineout2_diff); + /* If the line outputs are differential then we aren't presenting + * VMID as an output and can disable it. + */ + if (wm8993->pdata.lineout1_diff && wm8993->pdata.lineout2_diff) + codec->dapm.idle_bias_off = 1; + return 0; -err_enable: - regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies); -err_get: - regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies); - return ret; } static int wm8993_remove(struct snd_soc_codec *codec) @@ -1578,41 +1697,149 @@ static int wm8993_resume(struct snd_soc_codec *codec) #define wm8993_resume NULL #endif +/* Tune DC servo configuration */ +static struct reg_default wm8993_regmap_patch[] = { + { 0x44, 3 }, + { 0x56, 3 }, + { 0x44, 0 }, +}; + +static const struct regmap_config wm8993_regmap = { + .reg_bits = 8, + .val_bits = 16, + + .max_register = WM8993_MAX_REGISTER, + .volatile_reg = wm8993_volatile, + .readable_reg = wm8993_readable, + + .cache_type = REGCACHE_RBTREE, + .reg_defaults = wm8993_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(wm8993_reg_defaults), +}; + static struct snd_soc_codec_driver soc_codec_dev_wm8993 = { .probe = wm8993_probe, .remove = wm8993_remove, .suspend = wm8993_suspend, .resume = wm8993_resume, .set_bias_level = wm8993_set_bias_level, - .reg_cache_size = ARRAY_SIZE(wm8993_reg_defaults), - .reg_word_size = sizeof(u16), - .reg_cache_default = wm8993_reg_defaults, - .volatile_register = wm8993_volatile, }; -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) static __devinit int wm8993_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct wm8993_priv *wm8993; - int ret; + unsigned int reg; + int ret, i; wm8993 = devm_kzalloc(&i2c->dev, sizeof(struct wm8993_priv), GFP_KERNEL); if (wm8993 == NULL) return -ENOMEM; + wm8993->dev = &i2c->dev; + init_completion(&wm8993->fll_lock); + + wm8993->regmap = regmap_init_i2c(i2c, &wm8993_regmap); + if (IS_ERR(wm8993->regmap)) { + ret = PTR_ERR(wm8993->regmap); + dev_err(&i2c->dev, "Failed to allocate regmap: %d\n", ret); + return ret; + } + i2c_set_clientdata(i2c, wm8993); + for (i = 0; i < ARRAY_SIZE(wm8993->supplies); i++) + wm8993->supplies[i].supply = wm8993_supply_names[i]; + + ret = regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8993->supplies), + wm8993->supplies); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); + goto err; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies), + wm8993->supplies); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); + goto err_get; + } + + ret = regmap_read(wm8993->regmap, WM8993_SOFTWARE_RESET, ®); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret); + goto err_enable; + } + + if (reg != 0x8993) { + dev_err(&i2c->dev, "Invalid ID register value %x\n", reg); + ret = -EINVAL; + goto err_enable; + } + + ret = regmap_write(wm8993->regmap, WM8993_SOFTWARE_RESET, 0xffff); + if (ret != 0) + goto err_enable; + + ret = regmap_register_patch(wm8993->regmap, wm8993_regmap_patch, + ARRAY_SIZE(wm8993_regmap_patch)); + if (ret != 0) + dev_warn(wm8993->dev, "Failed to apply regmap patch: %d\n", + ret); + + if (i2c->irq) { + /* Put GPIO1 into interrupt mode (only GPIO1 can output IRQ) */ + ret = regmap_update_bits(wm8993->regmap, WM8993_GPIO1, + WM8993_GPIO1_PD | + WM8993_GPIO1_SEL_MASK, 7); + if (ret != 0) + goto err_enable; + + ret = request_threaded_irq(i2c->irq, NULL, wm8993_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "wm8993", wm8993); + if (ret != 0) + goto err_enable; + + } + + regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies); + + regcache_cache_only(wm8993->regmap, true); + ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm8993, &wm8993_dai, 1); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); + goto err_irq; + } + + return 0; + +err_irq: + if (i2c->irq) + free_irq(i2c->irq, wm8993); +err_enable: + regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies); +err_get: + regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies); +err: + regmap_exit(wm8993->regmap); return ret; } -static __devexit int wm8993_i2c_remove(struct i2c_client *client) +static __devexit int wm8993_i2c_remove(struct i2c_client *i2c) { - snd_soc_unregister_codec(&client->dev); - kfree(i2c_get_clientdata(client)); + struct wm8993_priv *wm8993 = i2c_get_clientdata(i2c); + + snd_soc_unregister_codec(&i2c->dev); + if (i2c->irq) + free_irq(i2c->irq, wm8993); + regmap_exit(wm8993->regmap); + regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies); + regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies); + return 0; } @@ -1631,30 +1858,8 @@ static struct i2c_driver wm8993_i2c_driver = { .remove = __devexit_p(wm8993_i2c_remove), .id_table = wm8993_i2c_id, }; -#endif - -static int __init wm8993_modinit(void) -{ - int ret = 0; -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) - ret = i2c_add_driver(&wm8993_i2c_driver); - if (ret != 0) { - pr_err("WM8993: Unable to register I2C driver: %d\n", - ret); - } -#endif - return ret; -} -module_init(wm8993_modinit); - -static void __exit wm8993_exit(void) -{ -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) - i2c_del_driver(&wm8993_i2c_driver); -#endif -} -module_exit(wm8993_exit); +module_i2c_driver(wm8993_i2c_driver); MODULE_DESCRIPTION("ASoC WM8993 driver"); MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
