diff options
Diffstat (limited to 'sound/soc/codecs/cs4270.c')
-rw-r--r-- | sound/soc/codecs/cs4270.c | 91 |
1 files changed, 75 insertions, 16 deletions
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index ffe122d1cd76..dfbeb2db61b3 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -28,6 +28,7 @@ #include <sound/initval.h> #include <linux/i2c.h> #include <linux/delay.h> +#include <linux/regulator/consumer.h> #include "cs4270.h" @@ -106,6 +107,10 @@ #define CS4270_MUTE_DAC_A 0x01 #define CS4270_MUTE_DAC_B 0x02 +static const char *supply_names[] = { + "va", "vd", "vlc" +}; + /* Private data for the CS4270 */ struct cs4270_private { struct snd_soc_codec codec; @@ -114,6 +119,9 @@ struct cs4270_private { unsigned int mode; /* The mode (I2S or left-justified) */ unsigned int slave_mode; unsigned int manual_mute; + + /* power domain regulators */ + struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; }; /** @@ -192,6 +200,11 @@ static struct cs4270_mode_ratios cs4270_mode_ratios[] = { * This function must be called by the machine driver's 'startup' function, * otherwise the list of supported sample rates will not be available in * time for ALSA. + * + * For setups with variable MCLKs, pass 0 as 'freq' argument. This will cause + * theoretically possible sample rates to be enabled. Call it again with a + * proper value set one the external clock is set (most probably you would do + * that from a machine's driver 'hw_param' hook. */ static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai, int clk_id, unsigned int freq, int dir) @@ -205,20 +218,27 @@ static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai, cs4270->mclk = freq; - for (i = 0; i < NUM_MCLK_RATIOS; i++) { - unsigned int rate = freq / cs4270_mode_ratios[i].ratio; - rates |= snd_pcm_rate_to_rate_bit(rate); - if (rate < rate_min) - rate_min = rate; - if (rate > rate_max) - rate_max = rate; - } - /* FIXME: soc should support a rate list */ - rates &= ~SNDRV_PCM_RATE_KNOT; + if (cs4270->mclk) { + for (i = 0; i < NUM_MCLK_RATIOS; i++) { + unsigned int rate = freq / cs4270_mode_ratios[i].ratio; + rates |= snd_pcm_rate_to_rate_bit(rate); + if (rate < rate_min) + rate_min = rate; + if (rate > rate_max) + rate_max = rate; + } + /* FIXME: soc should support a rate list */ + rates &= ~SNDRV_PCM_RATE_KNOT; - if (!rates) { - dev_err(codec->dev, "could not find a valid sample rate\n"); - return -EINVAL; + if (!rates) { + dev_err(codec->dev, "could not find a valid sample rate\n"); + return -EINVAL; + } + } else { + /* enable all possible rates */ + rates = SNDRV_PCM_RATE_8000_192000; + rate_min = 8000; + rate_max = 192000; } codec_dai->playback.rates = rates; @@ -579,7 +599,8 @@ static int cs4270_probe(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_codec *codec = cs4270_codec; - int ret; + struct cs4270_private *cs4270 = codec->private_data; + int i, ret; /* Connect the codec to the socdev. snd_soc_new_pcms() needs this. */ socdev->card->codec = codec; @@ -599,8 +620,26 @@ static int cs4270_probe(struct platform_device *pdev) goto error_free_pcms; } + /* get the power supply regulators */ + for (i = 0; i < ARRAY_SIZE(supply_names); i++) + cs4270->supplies[i].supply = supply_names[i]; + + ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(cs4270->supplies), + cs4270->supplies); + if (ret < 0) + goto error_free_pcms; + + ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies), + cs4270->supplies); + if (ret < 0) + goto error_free_regulators; + return 0; +error_free_regulators: + regulator_bulk_free(ARRAY_SIZE(cs4270->supplies), + cs4270->supplies); + error_free_pcms: snd_soc_free_pcms(socdev); @@ -616,8 +655,12 @@ error_free_pcms: static int cs4270_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = cs4270_codec; + struct cs4270_private *cs4270 = codec->private_data; snd_soc_free_pcms(socdev); + regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), cs4270->supplies); + regulator_bulk_free(ARRAY_SIZE(cs4270->supplies), cs4270->supplies); return 0; }; @@ -799,17 +842,33 @@ MODULE_DEVICE_TABLE(i2c, cs4270_id); static int cs4270_soc_suspend(struct platform_device *pdev, pm_message_t mesg) { struct snd_soc_codec *codec = cs4270_codec; - int reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL; + struct cs4270_private *cs4270 = codec->private_data; + int reg, ret; - return snd_soc_write(codec, CS4270_PWRCTL, reg); + reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL; + if (reg < 0) + return reg; + + ret = snd_soc_write(codec, CS4270_PWRCTL, reg); + if (ret < 0) + return ret; + + regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), + cs4270->supplies); + + return 0; } static int cs4270_soc_resume(struct platform_device *pdev) { struct snd_soc_codec *codec = cs4270_codec; + struct cs4270_private *cs4270 = codec->private_data; struct i2c_client *i2c_client = codec->control_data; int reg; + regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies), + cs4270->supplies); + /* In case the device was put to hard reset during sleep, we need to * wait 500ns here before any I2C communication. */ ndelay(500); |