diff options
Diffstat (limited to 'sound/pci/mixart/mixart_hwdep.h')
| -rw-r--r-- | sound/pci/mixart/mixart_hwdep.h | 145 |
1 files changed, 145 insertions, 0 deletions
diff --git a/sound/pci/mixart/mixart_hwdep.h b/sound/pci/mixart/mixart_hwdep.h new file mode 100644 index 000000000000..25190cc88cf8 --- /dev/null +++ b/sound/pci/mixart/mixart_hwdep.h @@ -0,0 +1,145 @@ +/* + * Driver for Digigram miXart soundcards + * + * definitions and makros for basic card access + * + * Copyright (c) 2003 by Digigram <alsa@digigram.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __SOUND_MIXART_HWDEP_H +#define __SOUND_MIXART_HWDEP_H + +#include <sound/hwdep.h> + +#define readl_be(x) be32_to_cpu(__raw_readl(x)) +#define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr) + +#define readl_le(x) le32_to_cpu(__raw_readl(x)) +#define writel_le(data,addr) __raw_writel(cpu_to_le32(data),addr) + +#define MIXART_MEM(mgr,x) ((mgr)->mem[0].virt + (x)) +#define MIXART_REG(mgr,x) ((mgr)->mem[1].virt + (x)) + + +/* Daughter board Type */ +#define DAUGHTER_TYPE_MASK 0x0F +#define DAUGHTER_VER_MASK 0xF0 +#define DAUGHTER_TYPEVER_MASK (DAUGHTER_TYPE_MASK|DAUGHTER_VER_MASK) + +#define MIXART_DAUGHTER_TYPE_NONE 0x00 +#define MIXART_DAUGHTER_TYPE_COBRANET 0x08 +#define MIXART_DAUGHTER_TYPE_AES 0x0E + + + +#define MIXART_BA0_SIZE (16 * 1024 * 1024) /* 16M */ +#define MIXART_BA1_SIZE (4 * 1024) /* 4k */ + +/* + * -----------BAR 0 -------------------------------------------------------------------------------------------------------- + */ +#define MIXART_PSEUDOREG 0x2000 /* base address for pseudoregister */ + +#define MIXART_PSEUDOREG_BOARDNUMBER MIXART_PSEUDOREG+0 /* board number */ + +/* perfmeter (available when elf loaded)*/ +#define MIXART_PSEUDOREG_PERF_STREAM_LOAD_OFFSET MIXART_PSEUDOREG+0x70 /* streaming load */ +#define MIXART_PSEUDOREG_PERF_SYSTEM_LOAD_OFFSET MIXART_PSEUDOREG+0x78 /* system load (reference)*/ +#define MIXART_PSEUDOREG_PERF_MAILBX_LOAD_OFFSET MIXART_PSEUDOREG+0x7C /* mailbox load */ +#define MIXART_PSEUDOREG_PERF_INTERR_LOAD_OFFSET MIXART_PSEUDOREG+0x74 /* interrupt handling load */ + +/* motherboard xilinx loader info */ +#define MIXART_PSEUDOREG_MXLX_BASE_ADDR_OFFSET MIXART_PSEUDOREG+0x9C /* 0x00600000 */ +#define MIXART_PSEUDOREG_MXLX_SIZE_OFFSET MIXART_PSEUDOREG+0xA0 /* xilinx size in bytes */ +#define MIXART_PSEUDOREG_MXLX_STATUS_OFFSET MIXART_PSEUDOREG+0xA4 /* status = EMBEBBED_STAT_XXX */ + +/* elf loader info */ +#define MIXART_PSEUDOREG_ELF_STATUS_OFFSET MIXART_PSEUDOREG+0xB0 /* status = EMBEBBED_STAT_XXX */ + +/* +* after the elf code is loaded, and the flowtable info was passed to it, +* the driver polls on this address, until it shows 1 (presence) or 2 (absence) +* once it is non-zero, the daughter board type may be read +*/ +#define MIXART_PSEUDOREG_DBRD_PRESENCE_OFFSET MIXART_PSEUDOREG+0x990 + +/* Global info structure */ +#define MIXART_PSEUDOREG_DBRD_TYPE_OFFSET MIXART_PSEUDOREG+0x994 /* Type and version of daughterboard */ + + +/* daughterboard xilinx loader info */ +#define MIXART_PSEUDOREG_DXLX_BASE_ADDR_OFFSET MIXART_PSEUDOREG+0x998 /* get the address here where to write the file */ +#define MIXART_PSEUDOREG_DXLX_SIZE_OFFSET MIXART_PSEUDOREG+0x99C /* xilinx size in bytes */ +#define MIXART_PSEUDOREG_DXLX_STATUS_OFFSET MIXART_PSEUDOREG+0x9A0 /* status = EMBEBBED_STAT_XXX */ + +/* */ +#define MIXART_FLOWTABLE_PTR 0x3000 /* pointer to flow table */ + +/* mailbox addresses */ + +/* message DRV -> EMB */ +#define MSG_INBOUND_POST_HEAD 0x010008 /* DRV posts MF + increment4 */ +#define MSG_INBOUND_POST_TAIL 0x01000C /* EMB gets MF + increment4 */ +/* message EMB -> DRV */ +#define MSG_OUTBOUND_POST_TAIL 0x01001C /* DRV gets MF + increment4 */ +#define MSG_OUTBOUND_POST_HEAD 0x010018 /* EMB posts MF + increment4 */ +/* Get Free Frames */ +#define MSG_INBOUND_FREE_TAIL 0x010004 /* DRV gets MFA + increment4 */ +#define MSG_OUTBOUND_FREE_TAIL 0x010014 /* EMB gets MFA + increment4 */ +/* Put Free Frames */ +#define MSG_OUTBOUND_FREE_HEAD 0x010010 /* DRV puts MFA + increment4 */ +#define MSG_INBOUND_FREE_HEAD 0x010000 /* EMB puts MFA + increment4 */ + +/* firmware addresses of the message fifos */ +#define MSG_BOUND_STACK_SIZE 0x004000 /* size of each following stack */ +/* posted messages */ +#define MSG_OUTBOUND_POST_STACK 0x108000 /* stack of messages to the DRV */ +#define MSG_INBOUND_POST_STACK 0x104000 /* stack of messages to the EMB */ +/* available empty messages */ +#define MSG_OUTBOUND_FREE_STACK 0x10C000 /* stack of free enveloped for EMB */ +#define MSG_INBOUND_FREE_STACK 0x100000 /* stack of free enveloped for DRV */ + + +/* defines for mailbox message frames */ +#define MSG_FRAME_OFFSET 0x64 +#define MSG_FRAME_SIZE 0x6400 +#define MSG_FRAME_NUMBER 32 +#define MSG_FROM_AGENT_ITMF_OFFSET (MSG_FRAME_OFFSET + (MSG_FRAME_SIZE * MSG_FRAME_NUMBER)) +#define MSG_TO_AGENT_ITMF_OFFSET (MSG_FROM_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE) +#define MSG_HOST_RSC_PROTECTION (MSG_TO_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE) +#define MSG_AGENT_RSC_PROTECTION (MSG_HOST_RSC_PROTECTION + 4) + + +/* + * -----------BAR 1 -------------------------------------------------------------------------------------------------------- + */ + +/* interrupt addresses and constants */ +#define MIXART_PCI_OMIMR_OFFSET 0x34 /* outbound message interrupt mask register */ +#define MIXART_PCI_OMISR_OFFSET 0x30 /* outbound message interrupt status register */ +#define MIXART_PCI_ODBR_OFFSET 0x60 /* outbound doorbell register */ + +#define MIXART_BA1_BRUTAL_RESET_OFFSET 0x68 /* write 1 in LSBit to reset board */ + +#define MIXART_HOST_ALL_INTERRUPT_MASKED 0x02B /* 0000 0010 1011 */ +#define MIXART_ALLOW_OUTBOUND_DOORBELL 0x023 /* 0000 0010 0011 */ +#define MIXART_OIDI 0x008 /* 0000 0000 1000 */ + + +int snd_mixart_setup_firmware(mixart_mgr_t *mgr); + +#endif /* __SOUND_MIXART_HWDEP_H */ |
