summaryrefslogtreecommitdiffstats
path: root/sound/pci/cs46xx
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/cs46xx')
-rw-r--r--sound/pci/cs46xx/cs46xx.c7
-rw-r--r--sound/pci/cs46xx/cs46xx.h1744
-rw-r--r--sound/pci/cs46xx/cs46xx_dsp_scb_types.h1213
-rw-r--r--sound/pci/cs46xx/cs46xx_dsp_spos.h234
-rw-r--r--sound/pci/cs46xx/cs46xx_dsp_task_types.h252
-rw-r--r--sound/pci/cs46xx/cs46xx_lib.c16
-rw-r--r--sound/pci/cs46xx/dsp_spos.c2
-rw-r--r--sound/pci/cs46xx/dsp_spos_scb_lib.c2
8 files changed, 3459 insertions, 11 deletions
diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c
index 6cc7404e0e8f..1e007c736a8b 100644
--- a/sound/pci/cs46xx/cs46xx.c
+++ b/sound/pci/cs46xx/cs46xx.c
@@ -30,7 +30,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <sound/core.h>
-#include <sound/cs46xx.h>
+#include "cs46xx.h"
#include <sound/initval.h>
MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
@@ -167,8 +167,9 @@ static struct pci_driver cs46xx_driver = {
.probe = snd_card_cs46xx_probe,
.remove = __devexit_p(snd_card_cs46xx_remove),
#ifdef CONFIG_PM
- .suspend = snd_cs46xx_suspend,
- .resume = snd_cs46xx_resume,
+ .driver = {
+ .pm = &snd_cs46xx_pm,
+ },
#endif
};
diff --git a/sound/pci/cs46xx/cs46xx.h b/sound/pci/cs46xx/cs46xx.h
new file mode 100644
index 000000000000..29d8a8da1ba7
--- /dev/null
+++ b/sound/pci/cs46xx/cs46xx.h
@@ -0,0 +1,1744 @@
+#ifndef __SOUND_CS46XX_H
+#define __SOUND_CS46XX_H
+
+/*
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ * Cirrus Logic, Inc.
+ * Definitions for Cirrus Logic CS46xx chips
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <sound/pcm.h>
+#include <sound/pcm-indirect.h>
+#include <sound/rawmidi.h>
+#include <sound/ac97_codec.h>
+#include "cs46xx_dsp_spos.h"
+
+/*
+ * Direct registers
+ */
+
+/*
+ * The following define the offsets of the registers accessed via base address
+ * register zero on the CS46xx part.
+ */
+#define BA0_HISR 0x00000000
+#define BA0_HSR0 0x00000004
+#define BA0_HICR 0x00000008
+#define BA0_DMSR 0x00000100
+#define BA0_HSAR 0x00000110
+#define BA0_HDAR 0x00000114
+#define BA0_HDMR 0x00000118
+#define BA0_HDCR 0x0000011C
+#define BA0_PFMC 0x00000200
+#define BA0_PFCV1 0x00000204
+#define BA0_PFCV2 0x00000208
+#define BA0_PCICFG00 0x00000300
+#define BA0_PCICFG04 0x00000304
+#define BA0_PCICFG08 0x00000308
+#define BA0_PCICFG0C 0x0000030C
+#define BA0_PCICFG10 0x00000310
+#define BA0_PCICFG14 0x00000314
+#define BA0_PCICFG18 0x00000318
+#define BA0_PCICFG1C 0x0000031C
+#define BA0_PCICFG20 0x00000320
+#define BA0_PCICFG24 0x00000324
+#define BA0_PCICFG28 0x00000328
+#define BA0_PCICFG2C 0x0000032C
+#define BA0_PCICFG30 0x00000330
+#define BA0_PCICFG34 0x00000334
+#define BA0_PCICFG38 0x00000338
+#define BA0_PCICFG3C 0x0000033C
+#define BA0_CLKCR1 0x00000400
+#define BA0_CLKCR2 0x00000404
+#define BA0_PLLM 0x00000408
+#define BA0_PLLCC 0x0000040C
+#define BA0_FRR 0x00000410
+#define BA0_CFL1 0x00000414
+#define BA0_CFL2 0x00000418
+#define BA0_SERMC1 0x00000420
+#define BA0_SERMC2 0x00000424
+#define BA0_SERC1 0x00000428
+#define BA0_SERC2 0x0000042C
+#define BA0_SERC3 0x00000430
+#define BA0_SERC4 0x00000434
+#define BA0_SERC5 0x00000438
+#define BA0_SERBSP 0x0000043C
+#define BA0_SERBST 0x00000440
+#define BA0_SERBCM 0x00000444
+#define BA0_SERBAD 0x00000448
+#define BA0_SERBCF 0x0000044C
+#define BA0_SERBWP 0x00000450
+#define BA0_SERBRP 0x00000454
+#ifndef NO_CS4612
+#define BA0_ASER_FADDR 0x00000458
+#endif
+#define BA0_ACCTL 0x00000460
+#define BA0_ACSTS 0x00000464
+#define BA0_ACOSV 0x00000468
+#define BA0_ACCAD 0x0000046C
+#define BA0_ACCDA 0x00000470
+#define BA0_ACISV 0x00000474
+#define BA0_ACSAD 0x00000478
+#define BA0_ACSDA 0x0000047C
+#define BA0_JSPT 0x00000480
+#define BA0_JSCTL 0x00000484
+#define BA0_JSC1 0x00000488
+#define BA0_JSC2 0x0000048C
+#define BA0_MIDCR 0x00000490
+#define BA0_MIDSR 0x00000494
+#define BA0_MIDWP 0x00000498
+#define BA0_MIDRP 0x0000049C
+#define BA0_JSIO 0x000004A0
+#ifndef NO_CS4612
+#define BA0_ASER_MASTER 0x000004A4
+#endif
+#define BA0_CFGI 0x000004B0
+#define BA0_SSVID 0x000004B4
+#define BA0_GPIOR 0x000004B8
+#ifndef NO_CS4612
+#define BA0_EGPIODR 0x000004BC
+#define BA0_EGPIOPTR 0x000004C0
+#define BA0_EGPIOTR 0x000004C4
+#define BA0_EGPIOWR 0x000004C8
+#define BA0_EGPIOSR 0x000004CC
+#define BA0_SERC6 0x000004D0
+#define BA0_SERC7 0x000004D4
+#define BA0_SERACC 0x000004D8
+#define BA0_ACCTL2 0x000004E0
+#define BA0_ACSTS2 0x000004E4
+#define BA0_ACOSV2 0x000004E8
+#define BA0_ACCAD2 0x000004EC
+#define BA0_ACCDA2 0x000004F0
+#define BA0_ACISV2 0x000004F4
+#define BA0_ACSAD2 0x000004F8
+#define BA0_ACSDA2 0x000004FC
+#define BA0_IOTAC0 0x00000500
+#define BA0_IOTAC1 0x00000504
+#define BA0_IOTAC2 0x00000508
+#define BA0_IOTAC3 0x0000050C
+#define BA0_IOTAC4 0x00000510
+#define BA0_IOTAC5 0x00000514
+#define BA0_IOTAC6 0x00000518
+#define BA0_IOTAC7 0x0000051C
+#define BA0_IOTAC8 0x00000520
+#define BA0_IOTAC9 0x00000524
+#define BA0_IOTAC10 0x00000528
+#define BA0_IOTAC11 0x0000052C
+#define BA0_IOTFR0 0x00000540
+#define BA0_IOTFR1 0x00000544
+#define BA0_IOTFR2 0x00000548
+#define BA0_IOTFR3 0x0000054C
+#define BA0_IOTFR4 0x00000550
+#define BA0_IOTFR5 0x00000554
+#define BA0_IOTFR6 0x00000558
+#define BA0_IOTFR7 0x0000055C
+#define BA0_IOTFIFO 0x00000580
+#define BA0_IOTRRD 0x00000584
+#define BA0_IOTFP 0x00000588
+#define BA0_IOTCR 0x0000058C
+#define BA0_DPCID 0x00000590
+#define BA0_DPCIA 0x00000594
+#define BA0_DPCIC 0x00000598
+#define BA0_PCPCIR 0x00000600
+#define BA0_PCPCIG 0x00000604
+#define BA0_PCPCIEN 0x00000608
+#define BA0_EPCIPMC 0x00000610
+#endif
+
+/*
+ * The following define the offsets of the registers and memories accessed via
+ * base address register one on the CS46xx part.
+ */
+#define BA1_SP_DMEM0 0x00000000
+#define BA1_SP_DMEM1 0x00010000
+#define BA1_SP_PMEM 0x00020000
+#define BA1_SP_REG 0x00030000
+#define BA1_SPCR 0x00030000
+#define BA1_DREG 0x00030004
+#define BA1_DSRWP 0x00030008
+#define BA1_TWPR 0x0003000C
+#define BA1_SPWR 0x00030010
+#define BA1_SPIR 0x00030014
+#define BA1_FGR1 0x00030020
+#define BA1_SPCS 0x00030028
+#define BA1_SDSR 0x0003002C
+#define BA1_FRMT 0x00030030
+#define BA1_FRCC 0x00030034
+#define BA1_FRSC 0x00030038
+#define BA1_OMNI_MEM 0x000E0000
+
+
+/*
+ * The following defines are for the flags in the host interrupt status
+ * register.
+ */
+#define HISR_VC_MASK 0x0000FFFF
+#define HISR_VC0 0x00000001
+#define HISR_VC1 0x00000002
+#define HISR_VC2 0x00000004
+#define HISR_VC3 0x00000008
+#define HISR_VC4 0x00000010
+#define HISR_VC5 0x00000020
+#define HISR_VC6 0x00000040
+#define HISR_VC7 0x00000080
+#define HISR_VC8 0x00000100
+#define HISR_VC9 0x00000200
+#define HISR_VC10 0x00000400
+#define HISR_VC11 0x00000800
+#define HISR_VC12 0x00001000
+#define HISR_VC13 0x00002000
+#define HISR_VC14 0x00004000
+#define HISR_VC15 0x00008000
+#define HISR_INT0 0x00010000
+#define HISR_INT1 0x00020000
+#define HISR_DMAI 0x00040000
+#define HISR_FROVR 0x00080000
+#define HISR_MIDI 0x00100000
+#ifdef NO_CS4612
+#define HISR_RESERVED 0x0FE00000
+#else
+#define HISR_SBINT 0x00200000
+#define HISR_RESERVED 0x0FC00000
+#endif
+#define HISR_H0P 0x40000000
+#define HISR_INTENA 0x80000000
+
+/*
+ * The following defines are for the flags in the host signal register 0.
+ */
+#define HSR0_VC_MASK 0xFFFFFFFF
+#define HSR0_VC16 0x00000001
+#define HSR0_VC17 0x00000002
+#define HSR0_VC18 0x00000004
+#define HSR0_VC19 0x00000008
+#define HSR0_VC20 0x00000010
+#define HSR0_VC21 0x00000020
+#define HSR0_VC22 0x00000040
+#define HSR0_VC23 0x00000080
+#define HSR0_VC24 0x00000100
+#define HSR0_VC25 0x00000200
+#define HSR0_VC26 0x00000400
+#define HSR0_VC27 0x00000800
+#define HSR0_VC28 0x00001000
+#define HSR0_VC29 0x00002000
+#define HSR0_VC30 0x00004000
+#define HSR0_VC31 0x00008000
+#define HSR0_VC32 0x00010000
+#define HSR0_VC33 0x00020000
+#define HSR0_VC34 0x00040000
+#define HSR0_VC35 0x00080000
+#define HSR0_VC36 0x00100000
+#define HSR0_VC37 0x00200000
+#define HSR0_VC38 0x00400000
+#define HSR0_VC39 0x00800000
+#define HSR0_VC40 0x01000000
+#define HSR0_VC41 0x02000000
+#define HSR0_VC42 0x04000000
+#define HSR0_VC43 0x08000000
+#define HSR0_VC44 0x10000000
+#define HSR0_VC45 0x20000000
+#define HSR0_VC46 0x40000000
+#define HSR0_VC47 0x80000000
+
+/*
+ * The following defines are for the flags in the host interrupt control
+ * register.
+ */
+#define HICR_IEV 0x00000001
+#define HICR_CHGM 0x00000002
+
+/*
+ * The following defines are for the flags in the DMA status register.
+ */
+#define DMSR_HP 0x00000001
+#define DMSR_HR 0x00000002
+#define DMSR_SP 0x00000004
+#define DMSR_SR 0x00000008
+
+/*
+ * The following defines are for the flags in the host DMA source address
+ * register.
+ */
+#define HSAR_HOST_ADDR_MASK 0xFFFFFFFF
+#define HSAR_DSP_ADDR_MASK 0x0000FFFF
+#define HSAR_MEMID_MASK 0x000F0000
+#define HSAR_MEMID_SP_DMEM0 0x00000000
+#define HSAR_MEMID_SP_DMEM1 0x00010000
+#define HSAR_MEMID_SP_PMEM 0x00020000
+#define HSAR_MEMID_SP_DEBUG 0x00030000
+#define HSAR_MEMID_OMNI_MEM 0x000E0000
+#define HSAR_END 0x40000000
+#define HSAR_ERR 0x80000000
+
+/*
+ * The following defines are for the flags in the host DMA destination address
+ * register.
+ */
+#define HDAR_HOST_ADDR_MASK 0xFFFFFFFF
+#define HDAR_DSP_ADDR_MASK 0x0000FFFF
+#define HDAR_MEMID_MASK 0x000F0000
+#define HDAR_MEMID_SP_DMEM0 0x00000000
+#define HDAR_MEMID_SP_DMEM1 0x00010000
+#define HDAR_MEMID_SP_PMEM 0x00020000
+#define HDAR_MEMID_SP_DEBUG 0x00030000
+#define HDAR_MEMID_OMNI_MEM 0x000E0000
+#define HDAR_END 0x40000000
+#define HDAR_ERR 0x80000000
+
+/*
+ * The following defines are for the flags in the host DMA control register.
+ */
+#define HDMR_AC_MASK 0x0000F000
+#define HDMR_AC_8_16 0x00001000
+#define HDMR_AC_M_S 0x00002000
+#define HDMR_AC_B_L 0x00004000
+#define HDMR_AC_S_U 0x00008000
+
+/*
+ * The following defines are for the flags in the host DMA control register.
+ */
+#define HDCR_COUNT_MASK 0x000003FF
+#define HDCR_DONE 0x00004000
+#define HDCR_OPT 0x00008000
+#define HDCR_WBD 0x00400000
+#define HDCR_WBS 0x00800000
+#define HDCR_DMS_MASK 0x07000000
+#define HDCR_DMS_LINEAR 0x00000000
+#define HDCR_DMS_16_DWORDS 0x01000000
+#define HDCR_DMS_32_DWORDS 0x02000000
+#define HDCR_DMS_64_DWORDS 0x03000000
+#define HDCR_DMS_128_DWORDS 0x04000000
+#define HDCR_DMS_256_DWORDS 0x05000000
+#define HDCR_DMS_512_DWORDS 0x06000000
+#define HDCR_DMS_1024_DWORDS 0x07000000
+#define HDCR_DH 0x08000000
+#define HDCR_SMS_MASK 0x70000000
+#define HDCR_SMS_LINEAR 0x00000000
+#define HDCR_SMS_16_DWORDS 0x10000000
+#define HDCR_SMS_32_DWORDS 0x20000000
+#define HDCR_SMS_64_DWORDS 0x30000000
+#define HDCR_SMS_128_DWORDS 0x40000000
+#define HDCR_SMS_256_DWORDS 0x50000000
+#define HDCR_SMS_512_DWORDS 0x60000000
+#define HDCR_SMS_1024_DWORDS 0x70000000
+#define HDCR_SH 0x80000000
+#define HDCR_COUNT_SHIFT 0
+
+/*
+ * The following defines are for the flags in the performance monitor control
+ * register.
+ */
+#define PFMC_C1SS_MASK 0x0000001F
+#define PFMC_C1EV 0x00000020
+#define PFMC_C1RS 0x00008000
+#define PFMC_C2SS_MASK 0x001F0000
+#define PFMC_C2EV 0x00200000
+#define PFMC_C2RS 0x80000000
+#define PFMC_C1SS_SHIFT 0
+#define PFMC_C2SS_SHIFT 16
+#define PFMC_BUS_GRANT 0
+#define PFMC_GRANT_AFTER_REQ 1
+#define PFMC_TRANSACTION 2
+#define PFMC_DWORD_TRANSFER 3
+#define PFMC_SLAVE_READ 4
+#define PFMC_SLAVE_WRITE 5
+#define PFMC_PREEMPTION 6
+#define PFMC_DISCONNECT_RETRY 7
+#define PFMC_INTERRUPT 8
+#define PFMC_BUS_OWNERSHIP 9
+#define PFMC_TRANSACTION_LAG 10
+#define PFMC_PCI_CLOCK 11
+#define PFMC_SERIAL_CLOCK 12
+#define PFMC_SP_CLOCK 13
+
+/*
+ * The following defines are for the flags in the performance counter value 1
+ * register.
+ */
+#define PFCV1_PC1V_MASK 0xFFFFFFFF
+#define PFCV1_PC1V_SHIFT 0
+
+/*
+ * The following defines are for the flags in the performance counter value 2
+ * register.
+ */
+#define PFCV2_PC2V_MASK 0xFFFFFFFF
+#define PFCV2_PC2V_SHIFT 0
+
+/*
+ * The following defines are for the flags in the clock control register 1.
+ */
+#define CLKCR1_OSCS 0x00000001
+#define CLKCR1_OSCP 0x00000002
+#define CLKCR1_PLLSS_MASK 0x0000000C
+#define CLKCR1_PLLSS_SERIAL 0x00000000
+#define CLKCR1_PLLSS_CRYSTAL 0x00000004
+#define CLKCR1_PLLSS_PCI 0x00000008
+#define CLKCR1_PLLSS_RESERVED 0x0000000C
+#define CLKCR1_PLLP 0x00000010
+#define CLKCR1_SWCE 0x00000020
+#define CLKCR1_PLLOS 0x00000040
+
+/*
+ * The following defines are for the flags in the clock control register 2.
+ */
+#define CLKCR2_PDIVS_MASK 0x0000000F
+#define CLKCR2_PDIVS_1 0x00000001
+#define CLKCR2_PDIVS_2 0x00000002
+#define CLKCR2_PDIVS_4 0x00000004
+#define CLKCR2_PDIVS_7 0x00000007
+#define CLKCR2_PDIVS_8 0x00000008
+#define CLKCR2_PDIVS_16 0x00000000
+
+/*
+ * The following defines are for the flags in the PLL multiplier register.
+ */
+#define PLLM_MASK 0x000000FF
+#define PLLM_SHIFT 0
+
+/*
+ * The following defines are for the flags in the PLL capacitor coefficient
+ * register.
+ */
+#define PLLCC_CDR_MASK 0x00000007
+#ifndef NO_CS4610
+#define PLLCC_CDR_240_350_MHZ 0x00000000
+#define PLLCC_CDR_184_265_MHZ 0x00000001
+#define PLLCC_CDR_144_205_MHZ 0x00000002
+#define PLLCC_CDR_111_160_MHZ 0x00000003
+#define PLLCC_CDR_87_123_MHZ 0x00000004
+#define PLLCC_CDR_67_96_MHZ 0x00000005
+#define PLLCC_CDR_52_74_MHZ 0x00000006
+#define PLLCC_CDR_45_58_MHZ 0x00000007
+#endif
+#ifndef NO_CS4612
+#define PLLCC_CDR_271_398_MHZ 0x00000000
+#define PLLCC_CDR_227_330_MHZ 0x00000001
+#define PLLCC_CDR_167_239_MHZ 0x00000002
+#define PLLCC_CDR_150_215_MHZ 0x00000003
+#define PLLCC_CDR_107_154_MHZ 0x00000004
+#define PLLCC_CDR_98_140_MHZ 0x00000005
+#define PLLCC_CDR_73_104_MHZ 0x00000006
+#define PLLCC_CDR_63_90_MHZ 0x00000007
+#endif
+#define PLLCC_LPF_MASK 0x000000F8
+#ifndef NO_CS4610
+#define PLLCC_LPF_23850_60000_KHZ 0x00000000
+#define PLLCC_LPF_7960_26290_KHZ 0x00000008
+#define PLLCC_LPF_4160_10980_KHZ 0x00000018
+#define PLLCC_LPF_1740_4580_KHZ 0x00000038
+#define PLLCC_LPF_724_1910_KHZ 0x00000078
+#define PLLCC_LPF_317_798_KHZ 0x000000F8
+#endif
+#ifndef NO_CS4612
+#define PLLCC_LPF_25580_64530_KHZ 0x00000000
+#define PLLCC_LPF_14360_37270_KHZ 0x00000008
+#define PLLCC_LPF_6100_16020_KHZ 0x00000018
+#define PLLCC_LPF_2540_6690_KHZ 0x00000038
+#define PLLCC_LPF_1050_2780_KHZ 0x00000078
+#define PLLCC_LPF_450_1160_KHZ 0x000000F8
+#endif
+
+/*
+ * The following defines are for the flags in the feature reporting register.
+ */
+#define FRR_FAB_MASK 0x00000003
+#define FRR_MASK_MASK 0x0000001C
+#ifdef NO_CS4612
+#define FRR_CFOP_MASK 0x000000E0
+#else
+#define FRR_CFOP_MASK 0x00000FE0
+#endif
+#define FRR_CFOP_NOT_DVD 0x00000020
+#define FRR_CFOP_A3D 0x00000040
+#define FRR_CFOP_128_PIN 0x00000080
+#ifndef NO_CS4612
+#define FRR_CFOP_CS4280 0x00000800
+#endif
+#define FRR_FAB_SHIFT 0
+#define FRR_MASK_SHIFT 2
+#define FRR_CFOP_SHIFT 5
+
+/*
+ * The following defines are for the flags in the configuration load 1
+ * register.
+ */
+#define CFL1_CLOCK_SOURCE_MASK 0x00000003
+#define CFL1_CLOCK_SOURCE_CS423X 0x00000000
+#define CFL1_CLOCK_SOURCE_AC97 0x00000001
+#define CFL1_CLOCK_SOURCE_CRYSTAL 0x00000002
+#define CFL1_CLOCK_SOURCE_DUAL_AC97 0x00000003
+#define CFL1_VALID_DATA_MASK 0x000000FF
+
+/*
+ * The following defines are for the flags in the configuration load 2
+ * register.
+ */
+#define CFL2_VALID_DATA_MASK 0x000000FF
+
+/*
+ * The following defines are for the flags in the serial port master control
+ * register 1.
+ */
+#define SERMC1_MSPE 0x00000001
+#define SERMC1_PTC_MASK 0x0000000E
+#define SERMC1_PTC_CS423X 0x00000000
+#define SERMC1_PTC_AC97 0x00000002
+#define SERMC1_PTC_DAC 0x00000004
+#define SERMC1_PLB 0x00000010
+#define SERMC1_XLB 0x00000020
+
+/*
+ * The following defines are for the flags in the serial port master control
+ * register 2.
+ */
+#define SERMC2_LROE 0x00000001
+#define SERMC2_MCOE 0x00000002
+#define SERMC2_MCDIV 0x00000004
+
+/*
+ * The following defines are for the flags in the serial port 1 configuration
+ * register.
+ */
+#define SERC1_SO1EN 0x00000001
+#define SERC1_SO1F_MASK 0x0000000E
+#define SERC1_SO1F_CS423X 0x00000000
+#define SERC1_SO1F_AC97 0x00000002
+#define SERC1_SO1F_DAC 0x00000004
+#define SERC1_SO1F_SPDIF 0x00000006
+
+/*
+ * The following defines are for the flags in the serial port 2 configuration
+ * register.
+ */
+#define SERC2_SI1EN 0x00000001
+#define SERC2_SI1F_MASK 0x0000000E
+#define SERC2_SI1F_CS423X 0x00000000
+#define SERC2_SI1F_AC97 0x00000002
+#define SERC2_SI1F_ADC 0x00000004
+#define SERC2_SI1F_SPDIF 0x00000006
+
+/*
+ * The following defines are for the flags in the serial port 3 configuration
+ * register.
+ */
+#define SERC3_SO2EN 0x00000001
+#define SERC3_SO2F_MASK 0x00000006
+#define SERC3_SO2F_DAC 0x00000000
+#define SERC3_SO2F_SPDIF 0x00000002
+
+/*
+ * The following defines are for the flags in the serial port 4 configuration
+ * register.
+ */
+#define SERC4_SO3EN 0x00000001
+#define SERC4_SO3F_MASK 0x00000006
+#define SERC4_SO3F_DAC 0x00000000
+#define SERC4_SO3F_SPDIF 0x00000002
+
+/*
+ * The following defines are for the flags in the serial port 5 configuration
+ * register.
+ */
+#define SERC5_SI2EN 0x00000001
+#define SERC5_SI2F_MASK 0x00000006
+#define SERC5_SI2F_ADC 0x00000000
+#define SERC5_SI2F_SPDIF 0x00000002
+
+/*
+ * The following defines are for the flags in the serial port backdoor sample
+ * pointer register.
+ */
+#define SERBSP_FSP_MASK 0x0000000F
+#define SERBSP_FSP_SHIFT 0
+
+/*
+ * The following defines are for the flags in the serial port backdoor status
+ * register.
+ */
+#define SERBST_RRDY 0x00000001
+#define SERBST_WBSY 0x00000002
+
+/*
+ * The following defines are for the flags in the serial port backdoor command
+ * register.
+ */
+#define SERBCM_RDC 0x00000001
+#define SERBCM_WRC 0x00000002
+
+/*
+ * The following defines are for the flags in the serial port backdoor address
+ * register.
+ */
+#ifdef NO_CS4612
+#define SERBAD_FAD_MASK 0x000000FF
+#else
+#define SERBAD_FAD_MASK 0x000001FF
+#endif
+#define SERBAD_FAD_SHIFT 0
+
+/*
+ * The following defines are for the flags in the serial port backdoor
+ * configuration register.
+ */
+#define SERBCF_HBP 0x00000001
+
+/*
+ * The following defines are for the flags in the serial port backdoor write
+ * port register.
+ */
+#define SERBWP_FWD_MASK 0x000FFFFF
+#define SERBWP_FWD_SHIFT 0
+
+/*
+ * The following defines are for the flags in the serial port backdoor read
+ * port register.
+ */
+#define SERBRP_FRD_MASK 0x000FFFFF
+#define SERBRP_FRD_SHIFT 0
+
+/*
+ * The following defines are for the flags in the async FIFO address register.
+ */
+#ifndef NO_CS4612
+#define ASER_FADDR_A1_MASK 0x000001FF
+#define ASER_FADDR_EN1 0x00008000
+#define ASER_FADDR_A2_MASK 0x01FF0000
+#define ASER_FADDR_EN2 0x80000000
+#define ASER_FADDR_A1_SHIFT 0
+#define ASER_FADDR_A2_SHIFT 16
+#endif
+
+/*
+ * The following defines are for the flags in the AC97 control register.
+ */
+#define ACCTL_RSTN 0x00000001
+#define ACCTL_ESYN 0x00000002
+#define ACCTL_VFRM 0x00000004
+#define ACCTL_DCV 0x00000008
+#define ACCTL_CRW 0x00000010
+#define ACCTL_ASYN 0x00000020
+#ifndef NO_CS4612
+#define ACCTL_TC 0x00000040
+#endif
+
+/*
+ * The following defines are for the flags in the AC97 status register.
+ */
+#define ACSTS_CRDY 0x00000001
+#define ACSTS_VSTS 0x00000002
+#ifndef NO_CS4612
+#define ACSTS_WKUP 0x00000004
+#endif
+
+/*
+ * The following defines are for the flags in the AC97 output slot valid
+ * register.
+ */
+#define ACOSV_SLV3 0x00000001
+#define ACOSV_SLV4 0x00000002
+#define ACOSV_SLV5 0x00000004
+#define ACOSV_SLV6 0x00000008
+#define ACOSV_SLV7 0x00000010
+#define ACOSV_SLV8 0x00000020
+#define ACOSV_SLV9 0x00000040
+#define ACOSV_SLV10 0x00000080
+#define ACOSV_SLV11 0x00000100
+#define ACOSV_SLV12 0x00000200
+
+/*
+ * The following defines are for the flags in the AC97 command address
+ * register.
+ */
+#define ACCAD_CI_MASK 0x0000007F
+#define ACCAD_CI_SHIFT 0
+
+/*
+ * The following defines are for the flags in the AC97 command data register.
+ */
+#define ACCDA_CD_MASK 0x0000FFFF
+#define ACCDA_CD_SHIFT 0
+
+/*
+ * The following defines are for the flags in the AC97 input slot valid
+ * register.
+ */
+#define ACISV_ISV3 0x00000001
+#define ACISV_ISV4 0x00000002
+#define ACISV_ISV5 0x00000004
+#define ACISV_ISV6 0x00000008
+#define ACISV_ISV7 0x00000010
+#define ACISV_ISV8 0x00000020
+#define ACISV_ISV9 0x00000040
+#define ACISV_ISV10 0x00000080
+#define ACISV_ISV11 0x00000100
+#define ACISV_ISV12 0x00000200
+
+/*
+ * The following defines are for the flags in the AC97 status address
+ * register.
+ */
+#define ACSAD_SI_MASK 0x0000007F
+#define ACSAD_SI_SHIFT 0
+
+/*
+ * The following defines are for the flags in the AC97 status data register.
+ */
+#define ACSDA_SD_MASK 0x0000FFFF
+#define ACSDA_SD_SHIFT 0
+
+/*
+ * The following defines are for the flags in the joystick poll/trigger
+ * register.
+ */
+#define JSPT_CAX 0x00000001
+#define JSPT_CAY 0x00000002
+#define JSPT_CBX 0x00000004
+#define JSPT_CBY 0x00000008
+#define JSPT_BA1 0x00000010
+#define JSPT_BA2 0x00000020
+#define JSPT_BB1 0x00000040
+#define JSPT_BB2 0x00000080
+
+/*
+ * The following defines are for the flags in the joystick control register.
+ */
+#define JSCTL_SP_MASK 0x00000003
+#define JSCTL_SP_SLOW 0x00000000
+#define JSCTL_SP_MEDIUM_SLOW 0x00000001
+#define JSCTL_SP_MEDIUM_FAST 0x00000002
+#define JSCTL_SP_FAST 0x00000003
+#define JSCTL_ARE 0x00000004
+
+/*
+ * The following defines are for the flags in the joystick coordinate pair 1
+ * readback register.
+ */
+#define JSC1_Y1V_MASK 0x0000FFFF
+#define JSC1_X1V_MASK 0xFFFF0000
+#define JSC1_Y1V_SHIFT 0
+#define JSC1_X1V_SHIFT 16
+
+/*
+ * The following defines are for the flags in the joystick coordinate pair 2
+ * readback register.
+ */
+#define JSC2_Y2V_MASK 0x0000FFFF
+#define JSC2_X2V_MASK 0xFFFF0000
+#define JSC2_Y2V_SHIFT 0
+#define JSC2_X2V_SHIFT 16
+
+/*
+ * The following defines are for the flags in the MIDI control register.
+ */
+#define MIDCR_TXE 0x00000001 /* Enable transmitting. */
+#define MIDCR_RXE 0x00000002 /* Enable receiving. */
+#define MIDCR_RIE 0x00000004 /* Interrupt upon tx ready. */
+#define MIDCR_TIE 0x00000008 /* Interrupt upon rx ready. */
+#define MIDCR_MLB 0x00000010 /* Enable midi loopback. */
+#define MIDCR_MRST 0x00000020 /* Reset interface. */
+
+/*
+ * The following defines are for the flags in the MIDI status register.
+ */
+#define MIDSR_TBF 0x00000001 /* Tx FIFO is full. */
+#define MIDSR_RBE 0x00000002 /* Rx FIFO is empty. */
+
+/*
+ * The following defines are for the flags in the MIDI write port register.
+ */
+#define MIDWP_MWD_MASK 0x000000FF
+#define MIDWP_MWD_SHIFT 0
+
+/*
+ * The following defines are for the flags in the MIDI read port register.
+ */
+#define MIDRP_MRD_MASK 0x000000FF
+#define MIDRP_MRD_SHIFT 0
+
+/*
+ * The following defines are for the flags in the joystick GPIO register.
+ */
+#define JSIO_DAX 0x00000001
+#define JSIO_DAY 0x00000002
+#define JSIO_DBX 0x00000004
+#define JSIO_DBY 0x00000008
+#define JSIO_AXOE 0x00000010
+#define JSIO_AYOE 0x00000020
+#define JSIO_BXOE 0x00000040
+#define JSIO_BYOE 0x00000080
+
+/*
+ * The following defines are for the flags in the master async/sync serial
+ * port enable register.
+ */
+#ifndef NO_CS4612
+#define ASER_MASTER_ME 0x00000001
+#endif
+
+/*
+ * The following defines are for the flags in the configuration interface
+ * register.
+ */
+#define CFGI_CLK 0x00000001
+#define CFGI_DOUT 0x00000002
+#define CFGI_DIN_EEN 0x00000004
+#define CFGI_EELD 0x00000008
+
+/*
+ * The following defines are for the flags in the subsystem ID and vendor ID
+ * register.
+ */
+#define SSVID_VID_MASK 0x0000FFFF
+#define SSVID_SID_MASK 0xFFFF0000
+#define SSVID_VID_SHIFT 0
+#define SSVID_SID_SHIFT 16
+
+/*
+ * The following defines are for the flags in the GPIO pin interface register.
+ */
+#define GPIOR_VOLDN 0x00000001
+#define GPIOR_VOLUP 0x00000002
+#define GPIOR_SI2D 0x00000004
+#define GPIOR_SI2OE 0x00000008
+
+/*
+ * The following defines are for the flags in the extended GPIO pin direction
+ * register.
+ */
+#ifndef NO_CS4612
+#define EGPIODR_GPOE0 0x00000001
+#define EGPIODR_GPOE1 0x00000002
+#define EGPIODR_GPOE2 0x00000004
+#define EGPIODR_GPOE3 0x00000008
+#define EGPIODR_GPOE4 0x00000010
+#define EGPIODR_GPOE5 0x00000020
+#define EGPIODR_GPOE6 0x00000040
+#define EGPIODR_GPOE7 0x00000080
+#define EGPIODR_GPOE8 0x00000100
+#endif
+
+/*
+ * The following defines are for the flags in the extended GPIO pin polarity/
+ * type register.
+ */
+#ifndef NO_CS4612
+#define EGPIOPTR_GPPT0 0x00000001
+#define EGPIOPTR_GPPT1 0x00000002
+#define EGPIOPTR_GPPT2 0x00000004
+#define EGPIOPTR_GPPT3 0x00000008
+#define EGPIOPTR_GPPT4 0x00000010
+#define EGPIOPTR_GPPT5 0x00000020
+#define EGPIOPTR_GPPT6 0x00000040
+#define EGPIOPTR_GPPT7 0x00000080
+#define EGPIOPTR_GPPT8 0x00000100
+#endif
+
+/*
+ * The following defines are for the flags in the extended GPIO pin sticky
+ * register.
+ */
+#ifndef NO_CS4612
+#define EGPIOTR_GPS0 0x00000001
+#define EGPIOTR_GPS1 0x00000002
+#define EGPIOTR_GPS2 0x00000004
+#define EGPIOTR_GPS3 0x00000008
+#define EGPIOTR_GPS4 0x00000010
+#define EGPIOTR_GPS5 0x00000020
+#define EGPIOTR_GPS6 0x00000040
+#define EGPIOTR_GPS7 0x00000080
+#define EGPIOTR_GPS8 0x00000100
+#endif
+
+/*
+ * The following defines are for the flags in the extended GPIO ping wakeup
+ * register.
+ */
+#ifndef NO_CS4612
+#define EGPIOWR_GPW0 0x00000001
+#define EGPIOWR_GPW1 0x00000002
+#define EGPIOWR_GPW2 0x00000004
+#define EGPIOWR_GPW3 0x00000008
+#define EGPIOWR_GPW4 0x00000010
+#define EGPIOWR_GPW5 0x00000020
+#define EGPIOWR_GPW6 0x00000040
+#define EGPIOWR_GPW7 0x00000080
+#define EGPIOWR_GPW8 0x00000100
+#endif
+
+/*
+ * The following defines are for the flags in the extended GPIO pin status
+ * register.
+ */
+#ifndef NO_CS4612
+#define EGPIOSR_GPS0 0x00000001
+#define EGPIOSR_GPS1 0x00000002
+#define EGPIOSR_GPS2 0x00000004
+#define EGPIOSR_GPS3 0x00000008
+#define EGPIOSR_GPS4 0x00000010
+#define EGPIOSR_GPS5 0x00000020
+#define EGPIOSR_GPS6 0x00000040
+#define EGPIOSR_GPS7 0x00000080
+#define EGPIOSR_GPS8 0x00000100
+#endif
+
+/*
+ * The following defines are for the flags in the serial port 6 configuration
+ * register.
+ */
+#ifndef NO_CS4612
+#define SERC6_ASDO2EN 0x00000001
+#endif
+
+/*
+ * The following defines are for the flags in the serial port 7 configuration
+ * register.
+ */
+#ifndef NO_CS4612
+#define SERC7_ASDI2EN 0x00000001
+#define SERC7_POSILB 0x00000002
+#define SERC7_SIPOLB 0x00000004
+#define SERC7_SOSILB 0x00000008
+#define SERC7_SISOLB 0x00000010
+#endif
+
+/*
+ * The following defines are for the flags in the serial port AC link
+ * configuration register.
+ */
+#ifndef NO_CS4612
+#define SERACC_CHIP_TYPE_MASK 0x00000001
+#define SERACC_CHIP_TYPE_1_03 0x00000000
+#define SERACC_CHIP_TYPE_2_0 0x00000001
+#define SERACC_TWO_CODECS 0x00000002
+#define SERACC_MDM 0x00000004
+#define SERACC_HSP 0x00000008
+#define SERACC_ODT 0x00000010 /* only CS4630 */
+#endif
+
+/*
+ * The following defines are for the flags in the AC97 control register 2.
+ */
+#ifndef NO_CS4612
+#define ACCTL2_RSTN 0x00000001
+#define ACCTL2_ESYN 0x00000002
+#define ACCTL2_VFRM 0x00000004
+#define ACCTL2_DCV 0x00000008
+#define ACCTL2_CRW 0x00000010
+#define ACCTL2_ASYN 0x00000020
+#endif
+
+/*
+ * The following defines are for the flags in the AC97 status register 2.
+ */
+#ifndef NO_CS4612
+#define ACSTS2_CRDY 0x00000001
+#define ACSTS2_VSTS 0x00000002
+#endif
+
+/*
+ * The following defines are for the flags in the AC97 output slot valid
+ * register 2.
+ */
+#ifndef NO_CS4612
+#define ACOSV2_SLV3 0x00000001
+#define ACOSV2_SLV4 0x00000002
+#define ACOSV2_SLV5 0x00000004
+#define ACOSV2_SLV6 0x00000008
+#define ACOSV2_SLV7 0x00000010
+#define ACOSV2_SLV8 0x00000020
+#define ACOSV2_SLV9 0x00000040
+#define ACOSV2_SLV10 0x00000080
+#define ACOSV2_SLV11 0x00000100
+#define ACOSV2_SLV12 0x00000200
+#endif
+
+/*
+ * The following defines are for the flags in the AC97 command address
+ * register 2.
+ */
+#ifndef NO_CS4612
+#define ACCAD2_CI_MASK 0x0000007F
+#define ACCAD2_CI_SHIFT 0
+#endif
+
+/*
+ * The following defines are for the flags in the AC97 command data register
+ * 2.
+ */
+#ifndef NO_CS4612
+#define ACCDA2_CD_MASK 0x0000FFFF
+#define ACCDA2_CD_SHIFT 0
+#endif
+
+/*
+ * The following defines are for the flags in the AC97 input slot valid
+ * register 2.
+ */
+#ifndef NO_CS4612
+#define ACISV2_ISV3 0x00000001
+#define ACISV2_ISV4 0x00000002
+#define ACISV2_ISV5 0x00000004
+#define ACISV2_ISV6 0x00000008
+#define ACISV2_ISV7 0x00000010
+#define ACISV2_ISV8 0x00000020
+#define ACISV2_ISV9 0x00000040
+#define ACISV2_ISV10 0x00000080
+#define ACISV2_ISV11 0x00000100
+#define ACISV2_ISV12 0x00000200
+#endif
+
+/*
+ * The following defines are for the flags in the AC97 status address
+ * register 2.
+ */
+#ifndef NO_CS4612
+#define ACSAD2_SI_MASK 0x0000007F
+#define ACSAD2_SI_SHIFT 0
+#endif
+
+/*
+ * The following defines are for the flags in the AC97 status data register 2.
+ */
+#ifndef NO_CS4612
+#define ACSDA2_SD_MASK 0x0000FFFF
+#define ACSDA2_SD_SHIFT 0
+#endif
+
+/*
+ * The following defines are for the flags in the I/O trap address and control
+ * registers (all 12).
+ */
+#ifndef NO_CS4612
+#define IOTAC_SA_MASK 0x0000FFFF
+#define IOTAC_MSK_MASK 0x000F0000
+#define IOTAC_IODC_MASK 0x06000000
+#define IOTAC_IODC_16_BIT 0x00000000
+#define IOTAC_IODC_10_BIT 0x02000000
+#define IOTAC_IODC_12_BIT 0x04000000
+#define IOTAC_WSPI 0x08000000
+#define IOTAC_RSPI 0x10000000
+#define IOTAC_WSE 0x20000000
+#define IOTAC_WE 0x40000000
+#define IOTAC_RE 0x80000000
+#define IOTAC_SA_SHIFT 0
+#define IOTAC_MSK_SHIFT 16
+#endif
+
+/*
+ * The following defines are for the flags in the I/O trap fast read registers
+ * (all 8).
+ */
+#ifndef NO_CS4612
+#define IOTFR_D_MASK 0x0000FFFF
+#define IOTFR_A_MASK 0x000F0000
+#define IOTFR_R_MASK 0x0F000000
+#define IOTFR_ALL 0x40000000
+#define IOTFR_VL 0x80000000
+#define IOTFR_D_SHIFT 0
+#define IOTFR_A_SHIFT 16
+#define IOTFR_R_SHIFT 24
+#endif
+
+/*
+ * The following defines are for the flags in the I/O trap FIFO register.
+ */
+#ifndef NO_CS4612
+#define IOTFIFO_BA_MASK 0x00003FFF
+#define IOTFIFO_S_MASK 0x00FF0000
+#define IOTFIFO_OF 0x40000000
+#define IOTFIFO_SPIOF 0x80000000
+#define IOTFIFO_BA_SHIFT 0
+#define IOTFIFO_S_SHIFT 16
+#endif
+
+/*
+ * The following defines are for the flags in the I/O trap retry read data
+ * register.
+ */
+#ifndef NO_CS4612
+#define IOTRRD_D_MASK 0x0000FFFF
+#define IOTRRD_RDV 0x80000000
+#define IOTRRD_D_SHIFT 0
+#endif
+
+/*
+ * The following defines are for the flags in the I/O trap FIFO pointer
+ * register.
+ */
+#ifndef NO_CS4612
+#define IOTFP_CA_MASK 0x00003FFF
+#define IOTFP_PA_MASK 0x3FFF0000
+#define IOTFP_CA_SHIFT 0
+#define IOTFP_PA_SHIFT 16
+#endif
+
+/*
+ * The following defines are for the flags in the I/O trap control register.
+ */
+#ifndef NO_CS4612
+#define IOTCR_ITD 0x00000001
+#define IOTCR_HRV 0x00000002
+#define IOTCR_SRV 0x00000004
+#define IOTCR_DTI 0x00000008
+#define IOTCR_DFI 0x00000010
+#define IOTCR_DDP 0x00000020
+#define IOTCR_JTE 0x00000040
+#define IOTCR_PPE 0x00000080
+#endif
+
+/*
+ * The following defines are for the flags in the direct PCI data register.
+ */
+#ifndef NO_CS4612
+#define DPCID_D_MASK 0xFFFFFFFF
+#define DPCID_D_SHIFT 0
+#endif
+
+/*
+ * The following defines are for the flags in the direct PCI address register.
+ */
+#ifndef NO_CS4612
+#define DPCIA_A_MASK 0xFFFFFFFF
+#define DPCIA_A_SHIFT 0
+#endif
+
+/*
+ * The following defines are for the flags in the direct PCI command register.
+ */
+#ifndef NO_CS4612
+#define DPCIC_C_MASK 0x0000000F
+#define DPCIC_C_IOREAD 0x00000002
+#define DPCIC_C_IOWRITE 0x00000003
+#define DPCIC_BE_MASK 0x000000F0
+#endif
+
+/*
+ * The following defines are for the flags in the PC/PCI request register.
+ */
+#ifndef NO_CS4612
+#define PCPCIR_RDC_MASK 0x00000007
+#define PCPCIR_C_MASK 0x00007000
+#define PCPCIR_REQ 0x00008000
+#define PCPCIR_RDC_SHIFT 0
+#define PCPCIR_C_SHIFT 12
+#endif
+
+/*
+ * The following defines are for the flags in the PC/PCI grant register.
+ */
+#ifndef NO_CS4612
+#define PCPCIG_GDC_MASK 0x00000007
+#define PCPCIG_VL 0x00008000
+#define PCPCIG_GDC_SHIFT 0
+#endif
+
+/*
+ * The following defines are for the flags in the PC/PCI master enable
+ * register.
+ */
+#ifndef NO_CS4612
+#define PCPCIEN_EN 0x00000001
+#endif
+
+/*
+ * The following defines are for the flags in the extended PCI power
+ * management control register.
+ */
+#ifndef NO_CS4612
+#define EPCIPMC_GWU 0x00000001
+#define EPCIPMC_FSPC 0x00000002
+#endif
+
+/*
+ * The following defines are for the flags in the SP control register.
+ */
+#define SPCR_RUN 0x00000001
+#define SPCR_STPFR 0x00000002
+#define SPCR_RUNFR 0x00000004
+#define SPCR_TICK 0x00000008
+#define SPCR_DRQEN 0x00000020
+#define SPCR_RSTSP 0x00000040
+#define SPCR_OREN 0x00000080
+#ifndef NO_CS4612
+#define SPCR_PCIINT 0x00000100
+#define SPCR_OINTD 0x00000200
+#define SPCR_CRE 0x00008000
+#endif
+
+/*
+ * The following defines are for the flags in the debug index register.
+ */
+#define DREG_REGID_MASK 0x0000007F
+#define DREG_DEBUG 0x00000080
+#define DREG_RGBK_MASK 0x00000700
+#define DREG_TRAP 0x00000800
+#if !defined(NO_CS4612)
+#if !defined(NO_CS4615)
+#define DREG_TRAPX 0x00001000
+#endif
+#endif
+#define DREG_REGID_SHIFT 0
+#define DREG_RGBK_SHIFT 8
+#define DREG_RGBK_REGID_MASK 0x0000077F
+#define DREG_REGID_R0 0x00000010
+#define DREG_REGID_R1 0x00000011
+#define DREG_REGID_R2 0x00000012
+#define DREG_REGID_R3 0x00000013
+#define DREG_REGID_R4 0x00000014
+#define DREG_REGID_R5 0x00000015
+#define DREG_REGID_R6 0x00000016
+#define DREG_REGID_R7 0x00000017
+#define DREG_REGID_R8 0x00000018
+#define DREG_REGID_R9 0x00000019
+#define DREG_REGID_RA 0x0000001A
+#define DREG_REGID_RB 0x0000001B
+#define DREG_REGID_RC 0x0000001C
+#define DREG_REGID_RD 0x0000001D
+#define DREG_REGID_RE 0x0000001E
+#define DREG_REGID_RF 0x0000001F
+#define DREG_REGID_RA_BUS_LOW 0x00000020
+#define DREG_REGID_RA_BUS_HIGH 0x00000038
+#define DREG_REGID_YBUS_LOW 0x00000050
+#define DREG_REGID_YBUS_HIGH 0x00000058
+#define DREG_REGID_TRAP_0 0x00000100
+#define DREG_REGID_TRAP_1 0x00000101
+#define DREG_REGID_TRAP_2 0x00000102
+#define DREG_REGID_TRAP_3 0x00000103
+#define DREG_REGID_TRAP_4 0x00000104
+#define DREG_REGID_TRAP_5 0x00000105
+#define DREG_REGID_TRAP_6 0x00000106
+#define DREG_REGID_TRAP_7 0x00000107
+#define DREG_REGID_INDIRECT_ADDRESS 0x0000010E
+#define DREG_REGID_TOP_OF_STACK 0x0000010F
+#if !defined(NO_CS4612)
+#if !defined(NO_CS4615)
+#define DREG_REGID_TRAP_8 0x00000110
+#define DREG_REGID_TRAP_9 0x00000111
+#define DREG_REGID_TRAP_10 0x00000112
+#define DREG_REGID_TRAP_11 0x00000113
+#define DREG_REGID_TRAP_12 0x00000114
+#define DREG_REGID_TRAP_13 0x00000115
+#define DREG_REGID_TRAP_14 0x00000116
+#define DREG_REGID_TRAP_15 0x00000117
+#define DREG_REGID_TRAP_16 0x00000118
+#define DREG_REGID_TRAP_17 0x00000119
+#define DREG_REGID_TRAP_18 0x0000011A
+#define DREG_REGID_TRAP_19 0x0000011B
+#define DREG_REGID_TRAP_20 0x0000011C
+#define DREG_REGID_TRAP_21 0x0000011D
+#define DREG_REGID_TRAP_22 0x0000011E
+#define DREG_REGID_TRAP_23 0x0000011F
+#endif
+#endif
+#define DREG_REGID_RSA0_LOW 0x00000200
+#define DREG_REGID_RSA0_HIGH 0x00000201
+#define DREG_REGID_RSA1_LOW 0x00000202
+#define DREG_REGID_RSA1_HIGH 0x00000203
+#define DREG_REGID_RSA2 0x00000204
+#define DREG_REGID_RSA3 0x00000205
+#define DREG_REGID_RSI0_LOW 0x00000206
+#define DREG_REGID_RSI0_HIGH 0x00000207
+#define DREG_REGID_RSI1 0x00000208
+#define DREG_REGID_RSI2 0x00000209
+#define DREG_REGID_SAGUSTATUS 0x0000020A
+#define DREG_REGID_RSCONFIG01_LOW 0x0000020B
+#define DREG_REGID_RSCONFIG01_HIGH 0x0000020C
+#define DREG_REGID_RSCONFIG23_LOW 0x0000020D
+#define DREG_REGID_RSCONFIG23_HIGH 0x0000020E
+#define DREG_REGID_RSDMA01E 0x0000020F
+#define DREG_REGID_RSDMA23E 0x00000210
+#define DREG_REGID_RSD0_LOW 0x00000211
+#define DREG_REGID_RSD0_HIGH 0x00000212
+#define DREG_REGID_RSD1_LOW 0x00000213
+#define DREG_REGID_RSD1_HIGH 0x00000214
+#define DREG_REGID_RSD2_LOW 0x00000215
+#define DREG_REGID_RSD2_HIGH 0x00000216
+#define DREG_REGID_RSD3_LOW 0x00000217
+#define DREG_REGID_RSD3_HIGH 0x00000218
+#define DREG_REGID_SRAR_HIGH 0x0000021A
+#define DREG_REGID_SRAR_LOW 0x0000021B
+#define DREG_REGID_DMA_STATE 0x0000021C
+#define DREG_REGID_CURRENT_DMA_STREAM 0x0000021D
+#define DREG_REGID_NEXT_DMA_STREAM 0x0000021E
+#define DREG_REGID_CPU_STATUS 0x00000300
+#define DREG_REGID_MAC_MODE 0x00000301
+#define DREG_REGID_STACK_AND_REPEAT 0x00000302
+#define DREG_REGID_INDEX0 0x00000304
+#define DREG_REGID_INDEX1 0x00000305
+#define DREG_REGID_DMA_STATE_0_3 0x00000400
+#define DREG_REGID_DMA_STATE_4_7 0x00000404
+#define DREG_REGID_DMA_STATE_8_11 0x00000408
+#define DREG_REGID_DMA_STATE_12_15 0x0000040C
+#define DREG_REGID_DMA_STATE_16_19 0x00000410
+#define DREG_REGID_DMA_STATE_20_23 0x00000414
+#define DREG_REGID_DMA_STATE_24_27 0x00000418
+#define DREG_REGID_DMA_STATE_28_31 0x0000041C
+#define DREG_REGID_DMA_STATE_32_35 0x00000420
+#define DREG_REGID_DMA_STATE_36_39 0x00000424
+#define DREG_REGID_DMA_STATE_40_43 0x00000428
+#define DREG_REGID_DMA_STATE_44_47 0x0000042C
+#define DREG_REGID_DMA_STATE_48_51 0x00000430
+#define DREG_REGID_DMA_STATE_52_55 0x00000434
+#define DREG_REGID_DMA_STATE_56_59 0x00000438
+#define DREG_REGID_DMA_STATE_60_63 0x0000043C
+#define DREG_REGID_DMA_STATE_64_67 0x00000440
+#define DREG_REGID_DMA_STATE_68_71 0x00000444
+#define DREG_REGID_DMA_STATE_72_75 0x00000448
+#define DREG_REGID_DMA_STATE_76_79 0x0000044C
+#define DREG_REGID_DMA_STATE_80_83 0x00000450
+#define DREG_REGID_DMA_STATE_84_87 0x00000454
+#define DREG_REGID_DMA_STATE_88_91 0x00000458
+#define DREG_REGID_DMA_STATE_92_95 0x0000045C
+#define DREG_REGID_TRAP_SELECT 0x00000500
+#define DREG_REGID_TRAP_WRITE_0 0x00000500
+#define DREG_REGID_TRAP_WRITE_1 0x00000501
+#define DREG_REGID_TRAP_WRITE_2 0x00000502
+#define DREG_REGID_TRAP_WRITE_3 0x00000503
+#define DREG_REGID_TRAP_WRITE_4 0x00000504
+#define DREG_REGID_TRAP_WRITE_5 0x00000505
+#define DREG_REGID_TRAP_WRITE_6 0x00000506
+#define DREG_REGID_TRAP_WRITE_7 0x00000507
+#if !defined(NO_CS4612)
+#if !defined(NO_CS4615)
+#define DREG_REGID_TRAP_WRITE_8 0x00000510
+#define DREG_REGID_TRAP_WRITE_9 0x00000511
+#define DREG_REGID_TRAP_WRITE_10 0x00000512
+#define DREG_REGID_TRAP_WRITE_11 0x00000513
+#define DREG_REGID_TRAP_WRITE_12 0x00000514
+#define DREG_REGID_TRAP_WRITE_13 0x00000515
+#define DREG_REGID_TRAP_WRITE_14 0x00000516
+#define DREG_REGID_TRAP_WRITE_15 0x00000517
+#define DREG_REGID_TRAP_WRITE_16 0x00000518
+#define DREG_REGID_TRAP_WRITE_17 0x00000519
+#define DREG_REGID_TRAP_WRITE_18 0x0000051A
+#define DREG_REGID_TRAP_WRITE_19 0x0000051B
+#define DREG_REGID_TRAP_WRITE_20 0x0000051C
+#define DREG_REGID_TRAP_WRITE_21 0x0000051D
+#define DREG_REGID_TRAP_WRITE_22 0x0000051E
+#define DREG_REGID_TRAP_WRITE_23 0x0000051F
+#endif
+#endif
+#define DREG_REGID_MAC0_ACC0_LOW 0x00000600
+#define DREG_REGID_MAC0_ACC1_LOW 0x00000601
+#define DREG_REGID_MAC0_ACC2_LOW 0x00000602
+#define DREG_REGID_MAC0_ACC3_LOW 0x00000603
+#define DREG_REGID_MAC1_ACC0_LOW 0x00000604
+#define DREG_REGID_MAC1_ACC1_LOW 0x00000605
+#define DREG_REGID_MAC1_ACC2_LOW 0x00000606
+#define DREG_REGID_MAC1_ACC3_LOW 0x00000607
+#define DREG_REGID_MAC0_ACC0_MID 0x00000608
+#define DREG_REGID_MAC0_ACC1_MID 0x00000609
+#define DREG_REGID_MAC0_ACC2_MID 0x0000060A
+#define DREG_REGID_MAC0_ACC3_MID 0x0000060B
+#define DREG_REGID_MAC1_ACC0_MID 0x0000060C
+#define DREG_REGID_MAC1_ACC1_MID 0x0000060D
+#define DREG_REGID_MAC1_ACC2_MID 0x0000060E
+#define DREG_REGID_MAC1_ACC3_MID 0x0000060F
+#define DREG_REGID_MAC0_ACC0_HIGH 0x00000610
+#define DREG_REGID_MAC0_ACC1_HIGH 0x00000611
+#define DREG_REGID_MAC0_ACC2_HIGH 0x00000612
+#define DREG_REGID_MAC0_ACC3_HIGH 0x00000613
+#define DREG_REGID_MAC1_ACC0_HIGH 0x00000614
+#define DREG_REGID_MAC1_ACC1_HIGH 0x00000615
+#define DREG_REGID_MAC1_ACC2_HIGH 0x00000616
+#define DREG_REGID_MAC1_ACC3_HIGH 0x00000617
+#define DREG_REGID_RSHOUT_LOW 0x00000620
+#define DREG_REGID_RSHOUT_MID 0x00000628
+#define DREG_REGID_RSHOUT_HIGH 0x00000630
+
+/*
+ * The following defines are for the flags in the DMA stream requestor write
+ */
+#define DSRWP_DSR_MASK 0x0000000F
+#define DSRWP_DSR_BG_RQ 0x00000001
+#define DSRWP_DSR_PRIORITY_MASK 0x00000006
+#define DSRWP_DSR_PRIORITY_0 0x00000000
+#define DSRWP_DSR_PRIORITY_1 0x00000002
+#define DSRWP_DSR_PRIORITY_2 0x00000004
+#define DSRWP_DSR_PRIORITY_3 0x00000006
+#define DSRWP_DSR_RQ_PENDING 0x00000008
+
+/*
+ * The following defines are for the flags in the trap write port register.
+ */
+#define TWPR_TW_MASK 0x0000FFFF
+#define TWPR_TW_SHIFT 0
+
+/*
+ * The following defines are for the flags in the stack pointer write
+ * register.
+ */
+#define SPWR_STKP_MASK 0x0000000F
+#define SPWR_STKP_SHIFT 0
+
+/*
+ * The following defines are for the flags in the SP interrupt register.
+ */
+#define SPIR_FRI 0x00000001
+#define SPIR_DOI 0x00000002
+#define SPIR_GPI2 0x00000004
+#define SPIR_GPI3 0x00000008
+#define SPIR_IP0 0x00000010
+#define SPIR_IP1 0x00000020
+#define SPIR_IP2 0x00000040
+#define SPIR_IP3 0x00000080
+
+/*
+ * The following defines are for the flags in the functional group 1 register.
+ */
+#define FGR1_F1S_MASK 0x0000FFFF
+#define FGR1_F1S_SHIFT 0
+
+/*
+ * The following defines are for the flags in the SP clock status register.
+ */
+#define SPCS_FRI 0x00000001
+#define SPCS_DOI 0x00000002
+#define SPCS_GPI2 0x00000004
+#define SPCS_GPI3 0x00000008
+#define SPCS_IP0 0x00000010
+#define SPCS_IP1 0x00000020
+#define SPCS_IP2 0x00000040
+#define SPCS_IP3 0x00000080
+#define SPCS_SPRUN 0x00000100
+#define SPCS_SLEEP 0x00000200
+#define SPCS_FG 0x00000400
+#define SPCS_ORUN 0x00000800
+#define SPCS_IRQ 0x00001000
+#define SPCS_FGN_MASK 0x0000E000
+#define SPCS_FGN_SHIFT 13
+
+/*
+ * The following defines are for the flags in the SP DMA requestor status
+ * register.
+ */
+#define SDSR_DCS_MASK 0x000000FF
+#define SDSR_DCS_SHIFT 0
+#define SDSR_DCS_NONE 0x00000007
+
+/*
+ * The following defines are for the flags in the frame timer register.
+ */
+#define FRMT_FTV_MASK 0x0000FFFF
+#define FRMT_FTV_SHIFT 0
+
+/*
+ * The following defines are for the flags in the frame timer current count
+ * register.
+ */
+#define FRCC_FCC_MASK 0x0000FFFF
+#define FRCC_FCC_SHIFT 0
+
+/*
+ * The following defines are for the flags in the frame timer save count
+ * register.
+ */
+#define FRSC_FCS_MASK 0x0000FFFF
+#define FRSC_FCS_SHIFT 0
+
+/*
+ * The following define the various flags stored in the scatter/gather
+ * descriptors.
+ */
+#define DMA_SG_NEXT_ENTRY_MASK 0x00000FF8
+#define DMA_SG_SAMPLE_END_MASK 0x0FFF0000
+#define DMA_SG_SAMPLE_END_FLAG 0x10000000
+#define DMA_SG_LOOP_END_FLAG 0x20000000
+#define DMA_SG_SIGNAL_END_FLAG 0x40000000
+#define DMA_SG_SIGNAL_PAGE_FLAG 0x80000000
+#define DMA_SG_NEXT_ENTRY_SHIFT 3
+#define DMA_SG_SAMPLE_END_SHIFT 16
+
+/*
+ * The following define the offsets of the fields within the on-chip generic
+ * DMA requestor.
+ */
+#define DMA_RQ_CONTROL1 0x00000000
+#define DMA_RQ_CONTROL2 0x00000004
+#define DMA_RQ_SOURCE_ADDR 0x00000008
+#define DMA_RQ_DESTINATION_ADDR 0x0000000C
+#define DMA_RQ_NEXT_PAGE_ADDR 0x00000010
+#define DMA_RQ_NEXT_PAGE_SGDESC 0x00000014
+#define DMA_RQ_LOOP_START_ADDR 0x00000018
+#define DMA_RQ_POST_LOOP_ADDR 0x0000001C
+#define DMA_RQ_PAGE_MAP_ADDR 0x00000020
+
+/*
+ * The following defines are for the flags in the first control word of the
+ * on-chip generic DMA requestor.
+ */
+#define DMA_RQ_C1_COUNT_MASK 0x000003FF
+#define DMA_RQ_C1_DESTINATION_SCATTER 0x00001000
+#define DMA_RQ_C1_SOURCE_GATHER 0x00002000
+#define DMA_RQ_C1_DONE_FLAG 0x00004000
+#define DMA_RQ_C1_OPTIMIZE_STATE 0x00008000
+#define DMA_RQ_C1_SAMPLE_END_STATE_MASK 0x00030000
+#define DMA_RQ_C1_FULL_PAGE 0x00000000
+#define DMA_RQ_C1_BEFORE_SAMPLE_END 0x00010000
+#define DMA_RQ_C1_PAGE_MAP_ERROR 0x00020000
+#define DMA_RQ_C1_AT_SAMPLE_END 0x00030000
+#define DMA_RQ_C1_LOOP_END_STATE_MASK 0x000C0000
+#define DMA_RQ_C1_NOT_LOOP_END 0x00000000
+#define DMA_RQ_C1_BEFORE_LOOP_END 0x00040000
+#define DMA_RQ_C1_2PAGE_LOOP_BEGIN 0x00080000
+#define DMA_RQ_C1_LOOP_BEGIN 0x000C0000
+#define DMA_RQ_C1_PAGE_MAP_MASK 0x00300000
+#define DMA_RQ_C1_PM_NONE_PENDING 0x00000000
+#define DMA_RQ_C1_PM_NEXT_PENDING 0x00100000
+#define DMA_RQ_C1_PM_RESERVED 0x00200000
+#define DMA_RQ_C1_PM_LOOP_NEXT_PENDING 0x00300000
+#define DMA_RQ_C1_WRITEBACK_DEST_FLAG 0x00400000
+#define DMA_RQ_C1_WRITEBACK_SRC_FLAG 0x00800000
+#define DMA_RQ_C1_DEST_SIZE_MASK 0x07000000
+#define DMA_RQ_C1_DEST_LINEAR 0x00000000
+#define DMA_RQ_C1_DEST_MOD16 0x01000000
+#define DMA_RQ_C1_DEST_MOD32 0x02000000
+#define DMA_RQ_C1_DEST_MOD64 0x03000000
+#define DMA_RQ_C1_DEST_MOD128 0x04000000
+#define DMA_RQ_C1_DEST_MOD256 0x05000000
+#define DMA_RQ_C1_DEST_MOD512 0x06000000
+#define DMA_RQ_C1_DEST_MOD1024 0x07000000
+#define DMA_RQ_C1_DEST_ON_HOST 0x08000000
+#define DMA_RQ_C1_SOURCE_SIZE_MASK 0x70000000
+#define DMA_RQ_C1_SOURCE_LINEAR 0x00000000
+#define DMA_RQ_C1_SOURCE_MOD16 0x10000000
+#define DMA_RQ_C1_SOURCE_MOD32 0x20000000
+#define DMA_RQ_C1_SOURCE_MOD64 0x30000000
+#define DMA_RQ_C1_SOURCE_MOD128 0x40000000
+#define DMA_RQ_C1_SOURCE_MOD256 0x50000000
+#define DMA_RQ_C1_SOURCE_MOD512 0x60000000
+#define DMA_RQ_C1_SOURCE_MOD1024 0x70000000
+#define DMA_RQ_C1_SOURCE_ON_HOST 0x80000000
+#define DMA_RQ_C1_COUNT_SHIFT 0
+
+/*
+ * The following defines are for the flags in the second control word of the
+ * on-chip generic DMA requestor.
+ */
+#define DMA_RQ_C2_VIRTUAL_CHANNEL_MASK 0x0000003F
+#define DMA_RQ_C2_VIRTUAL_SIGNAL_MASK 0x00000300
+#define DMA_RQ_C2_NO_VIRTUAL_SIGNAL 0x00000000
+#define DMA_RQ_C2_SIGNAL_EVERY_DMA 0x00000100
+#define DMA_RQ_C2_SIGNAL_SOURCE_PINGPONG 0x00000200
+#define DMA_RQ_C2_SIGNAL_DEST_PINGPONG 0x00000300
+#define DMA_RQ_C2_AUDIO_CONVERT_MASK 0x0000F000
+#define DMA_RQ_C2_AC_NONE 0x00000000
+#define DMA_RQ_C2_AC_8_TO_16_BIT 0x00001000
+#define DMA_RQ_C2_AC_MONO_TO_STEREO 0x00002000
+#define DMA_RQ_C2_AC_ENDIAN_CONVERT 0x00004000
+#define DMA_RQ_C2_AC_SIGNED_CONVERT 0x00008000
+#define DMA_RQ_C2_LOOP_END_MASK 0x0FFF0000
+#define DMA_RQ_C2_LOOP_MASK 0x30000000
+#define DMA_RQ_C2_NO_LOOP 0x00000000
+#define DMA_RQ_C2_ONE_PAGE_LOOP 0x10000000
+#define DMA_RQ_C2_TWO_PAGE_LOOP 0x20000000
+#define DMA_RQ_C2_MULTI_PAGE_LOOP 0x30000000
+#define DMA_RQ_C2_SIGNAL_LOOP_BACK 0x40000000
+#define DMA_RQ_C2_SIGNAL_POST_BEGIN_PAGE 0x80000000
+#define DMA_RQ_C2_VIRTUAL_CHANNEL_SHIFT 0
+#define DMA_RQ_C2_LOOP_END_SHIFT 16
+
+/*
+ * The following defines are for the flags in the source and destination words
+ * of the on-chip generic DMA requestor.
+ */
+#define DMA_RQ_SD_ADDRESS_MASK 0x0000FFFF
+#define DMA_RQ_SD_MEMORY_ID_MASK 0x000F0000
+#define DMA_RQ_SD_SP_PARAM_ADDR 0x00000000
+#define DMA_RQ_SD_SP_SAMPLE_ADDR 0x00010000
+#define DMA_RQ_SD_SP_PROGRAM_ADDR 0x00020000
+#define DMA_RQ_SD_SP_DEBUG_ADDR 0x00030000
+#define DMA_RQ_SD_OMNIMEM_ADDR 0x000E0000
+#define DMA_RQ_SD_END_FLAG 0x40000000
+#define DMA_RQ_SD_ERROR_FLAG 0x80000000
+#define DMA_RQ_SD_ADDRESS_SHIFT 0
+
+/*
+ * The following defines are for the flags in the page map address word of the
+ * on-chip generic DMA requestor.
+ */
+#define DMA_RQ_PMA_LOOP_THIRD_PAGE_ENTRY_MASK 0x00000FF8
+#define DMA_RQ_PMA_PAGE_TABLE_MASK 0xFFFFF000
+#define DMA_RQ_PMA_LOOP_THIRD_PAGE_ENTRY_SHIFT 3
+#define DMA_RQ_PMA_PAGE_TABLE_SHIFT 12
+
+#define BA1_VARIDEC_BUF_1 0x000
+
+#define BA1_PDTC 0x0c0 /* BA1_PLAY_DMA_TRANSACTION_COUNT_REG */
+#define BA1_PFIE 0x0c4 /* BA1_PLAY_FORMAT_&_INTERRUPT_ENABLE_REG */
+#define BA1_PBA 0x0c8 /* BA1_PLAY_BUFFER_ADDRESS */
+#define BA1_PVOL 0x0f8 /* BA1_PLAY_VOLUME_REG */
+#define BA1_PSRC 0x288 /* BA1_PLAY_SAMPLE_RATE_CORRECTION_REG */
+#define BA1_PCTL 0x2a4 /* BA1_PLAY_CONTROL_REG */
+#define BA1_PPI 0x2b4 /* BA1_PLAY_PHASE_INCREMENT_REG */
+
+#define BA1_CCTL 0x064 /* BA1_CAPTURE_CONTROL_REG */
+#define BA1_CIE 0x104 /* BA1_CAPTURE_INTERRUPT_ENABLE_REG */
+#define BA1_CBA 0x10c /* BA1_CAPTURE_BUFFER_ADDRESS */
+#define BA1_CSRC 0x2c8 /* BA1_CAPTURE_SAMPLE_RATE_CORRECTION_REG */
+#define BA1_CCI 0x2d8 /* BA1_CAPTURE_COEFFICIENT_INCREMENT_REG */
+#define BA1_CD 0x2e0 /* BA1_CAPTURE_DELAY_REG */
+#define BA1_CPI 0x2f4 /* BA1_CAPTURE_PHASE_INCREMENT_REG */
+#define BA1_CVOL 0x2f8 /* BA1_CAPTURE_VOLUME_REG */
+
+#define BA1_CFG1 0x134 /* BA1_CAPTURE_FRAME_GROUP_1_REG */
+#define BA1_CFG2 0x138 /* BA1_CAPTURE_FRAME_GROUP_2_REG */
+#define BA1_CCST 0x13c /* BA1_CAPTURE_CONSTANT_REG */
+#define BA1_CSPB 0x340 /* BA1_CAPTURE_SPB_ADDRESS */
+
+/*
+ *
+ */
+
+#define CS46XX_MODE_OUTPUT (1<<0) /* MIDI UART - output */
+#define CS46XX_MODE_INPUT (1<<1) /* MIDI UART - input */
+
+/*
+ *
+ */
+
+#define SAVE_REG_MAX 0x10
+#define POWER_DOWN_ALL 0x7f0f
+
+/* maxinum number of AC97 codecs connected, AC97 2.0 defined 4 */
+#define MAX_NR_AC97 4
+#define CS46XX_PRIMARY_CODEC_INDEX 0
+#define CS46XX_SECONDARY_CODEC_INDEX 1
+#define CS46XX_SECONDARY_CODEC_OFFSET 0x80
+#define CS46XX_DSP_CAPTURE_CHANNEL 1
+
+/* capture */
+#define CS46XX_DSP_CAPTURE_CHANNEL 1
+
+/* mixer */
+#define CS46XX_MIXER_SPDIF_INPUT_ELEMENT 1
+#define CS46XX_MIXER_SPDIF_OUTPUT_ELEMENT 2
+
+
+struct snd_cs46xx_pcm {
+ struct snd_dma_buffer hw_buf;
+
+ unsigned int ctl;
+ unsigned int shift; /* Shift count to trasform frames in bytes */
+ struct snd_pcm_indirect pcm_rec;
+ struct snd_pcm_substream *substream;
+
+ struct dsp_pcm_channel_descriptor * pcm_channel;
+
+ int pcm_channel_id; /* Fron Rear, Center Lfe ... */
+};
+
+struct snd_cs46xx_region {
+ char name[24];
+ unsigned long base;
+ void __iomem *remap_addr;
+ unsigned long size;
+ struct resource *resource;
+};
+
+struct snd_cs46xx {
+ int irq;
+ unsigned long ba0_addr;
+ unsigned long ba1_addr;
+ union {
+ struct {
+ struct snd_cs46xx_region ba0;
+ struct snd_cs46xx_region data0;
+ struct snd_cs46xx_region data1;
+ struct snd_cs46xx_region pmem;
+ struct snd_cs46xx_region reg;
+ } name;
+ struct snd_cs46xx_region idx[5];
+ } region;
+
+ unsigned int mode;
+
+ struct {
+ struct snd_dma_buffer hw_buf;
+
+ unsigned int ctl;
+ unsigned int shift; /* Shift count to trasform frames in bytes */
+ struct snd_pcm_indirect pcm_rec;
+ struct snd_pcm_substream *substream;
+ } capt;
+
+
+ int nr_ac97_codecs;
+ struct snd_ac97_bus *ac97_bus;
+ struct snd_ac97 *ac97[MAX_NR_AC97];
+
+ struct pci_dev *pci;
+ struct snd_card *card;
+ struct snd_pcm *pcm;
+
+ struct snd_rawmidi *rmidi;
+ struct snd_rawmidi_substream *midi_input;
+ struct snd_rawmidi_substream *midi_output;
+
+ spinlock_t reg_lock;
+ unsigned int midcr;
+ unsigned int uartm;
+
+ int amplifier;
+ void (*amplifier_ctrl)(struct snd_cs46xx *, int);
+ void (*active_ctrl)(struct snd_cs46xx *, int);
+ void (*mixer_init)(struct snd_cs46xx *);
+
+ int acpi_port;
+ struct snd_kcontrol *eapd_switch; /* for amplifier hack */
+ int accept_valid; /* accept mmap valid (for OSS) */
+ int in_suspend;
+
+ struct gameport *gameport;
+
+#ifdef CONFIG_SND_CS46XX_NEW_DSP
+ struct mutex spos_mutex;
+
+ struct dsp_spos_instance * dsp_spos_instance;
+
+ struct snd_pcm *pcm_rear;
+ struct snd_pcm *pcm_center_lfe;
+ struct snd_pcm *pcm_iec958;
+#else /* for compatibility */
+ struct snd_cs46xx_pcm *playback_pcm;
+ unsigned int play_ctl;
+#endif
+
+#ifdef CONFIG_PM
+ u32 *saved_regs;
+#endif
+};
+
+int snd_cs46xx_create(struct snd_card *card,
+ struct pci_dev *pci,
+ int external_amp, int thinkpad,
+ struct snd_cs46xx **rcodec);
+extern const struct dev_pm_ops snd_cs46xx_pm;
+
+int snd_cs46xx_pcm(struct snd_cs46xx *chip, int device, struct snd_pcm **rpcm);
+int snd_cs46xx_pcm_rear(struct snd_cs46xx *chip, int device, struct snd_pcm **rpcm);
+int snd_cs46xx_pcm_iec958(struct snd_cs46xx *chip, int device, struct snd_pcm **rpcm);
+int snd_cs46xx_pcm_center_lfe(struct snd_cs46xx *chip, int device, struct snd_pcm **rpcm);
+int snd_cs46xx_mixer(struct snd_cs46xx *chip, int spdif_device);
+int snd_cs46xx_midi(struct snd_cs46xx *chip, int device, struct snd_rawmidi **rmidi);
+int snd_cs46xx_start_dsp(struct snd_cs46xx *chip);
+int snd_cs46xx_gameport(struct snd_cs46xx *chip);
+
+#endif /* __SOUND_CS46XX_H */
diff --git a/sound/pci/cs46xx/cs46xx_dsp_scb_types.h b/sound/pci/cs46xx/cs46xx_dsp_scb_types.h
new file mode 100644
index 000000000000..080857ad0ca2
--- /dev/null
+++ b/sound/pci/cs46xx/cs46xx_dsp_scb_types.h
@@ -0,0 +1,1213 @@
+/*
+ * The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * NOTE: comments are copy/paste from cwcemb80.lst
+ * provided by Tom Woller at Cirrus (my only
+ * documentation about the SP OS running inside
+ * the DSP)
+ */
+
+#ifndef __CS46XX_DSP_SCB_TYPES_H__
+#define __CS46XX_DSP_SCB_TYPES_H__
+
+#include <asm/byteorder.h>
+
+#ifndef ___DSP_DUAL_16BIT_ALLOC
+#if defined(__LITTLE_ENDIAN)
+#define ___DSP_DUAL_16BIT_ALLOC(a,b) u16 a; u16 b;
+#elif defined(__BIG_ENDIAN)
+#define ___DSP_DUAL_16BIT_ALLOC(a,b) u16 b; u16 a;
+#else
+#error Not __LITTLE_ENDIAN and not __BIG_ENDIAN, then what ???
+#endif
+#endif
+
+/* This structs are used internally by the SP */
+
+struct dsp_basic_dma_req {
+ /* DMA Requestor Word 0 (DCW) fields:
+
+ 31 [30-28]27 [26:24] 23 22 21 20 [19:18] [17:16] 15 14 13 12 11 10 9 8 7 6 [5:0]
+ _______________________________________________________________________________________
+ |S| SBT |D| DBT |wb|wb| | | LS | SS |Opt|Do|SSG|DSG| | | | | | | Dword |
+ |H|_____ |H|_________|S_|D |__|__|______|_______|___|ne|__ |__ |__|__|_|_|_|_|_Count -1|
+ */
+ u32 dcw; /* DMA Control Word */
+ u32 dmw; /* DMA Mode Word */
+ u32 saw; /* Source Address Word */
+ u32 daw; /* Destination Address Word */
+};
+
+struct dsp_scatter_gather_ext {
+ u32 npaw; /* Next-Page Address Word */
+
+ /* DMA Requestor Word 5 (NPCW) fields:
+
+ 31-30 29 28 [27:16] [15:12] [11:3] [2:0]
+ _________________________________________________________________________________________
+ |SV |LE|SE| Sample-end byte offset | | Page-map entry offset for next | |
+ |page|__|__| ___________________________|_________|__page, if !sample-end___________|____|
+ */
+ u32 npcw; /* Next-Page Control Word */
+ u32 lbaw; /* Loop-Begin Address Word */
+ u32 nplbaw; /* Next-Page after Loop-Begin Address Word */
+ u32 sgaw; /* Scatter/Gather Address Word */
+};
+
+struct dsp_volume_control {
+ ___DSP_DUAL_16BIT_ALLOC(
+ rightTarg, /* Target volume for left & right channels */
+ leftTarg
+ )
+ ___DSP_DUAL_16BIT_ALLOC(
+ rightVol, /* Current left & right channel volumes */
+ leftVol
+ )
+};
+
+/* Generic stream control block (SCB) structure definition */
+struct dsp_generic_scb {
+ /* For streaming I/O, the DSP should never alter any words in the DMA
+ requestor or the scatter/gather extension. Only ad hoc DMA request
+ streams are free to alter the requestor (currently only occur in the
+ DOS-based MIDI controller and in debugger-inserted code).
+
+ If an SCB does not have any associated DMA requestor, these 9 ints
+ may be freed for use by other tasks, but the pointer to the SCB must
+ still be such that the insOrd:nextSCB appear at offset 9 from the
+ SCB pointer.
+
+ Basic (non scatter/gather) DMA requestor (4 ints)
+ */
+
+ /* Initialized by the host, only modified by DMA
+ R/O for the DSP task */
+ struct dsp_basic_dma_req basic_req; /* Optional */
+
+ /* Scatter/gather DMA requestor extension (5 ints)
+ Initialized by the host, only modified by DMA
+ DSP task never needs to even read these.
+ */
+ struct dsp_scatter_gather_ext sg_ext; /* Optional */
+
+ /* Sublist pointer & next stream control block (SCB) link.
+ Initialized & modified by the host R/O for the DSP task
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ next_scb, /* REQUIRED */
+ sub_list_ptr /* REQUIRED */
+ )
+
+ /* Pointer to this tasks parameter block & stream function pointer
+ Initialized by the host R/O for the DSP task */
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point, /* REQUIRED */
+ this_spb /* REQUIRED */
+ )
+
+ /* rsConfig register for stream buffer (rsDMA reg.
+ is loaded from basicReq.daw for incoming streams, or
+ basicReq.saw, for outgoing streams)
+
+ 31 30 29 [28:24] [23:16] 15 14 13 12 11 10 9 8 7 6 5 4 [3:0]
+ ______________________________________________________________________________
+ |DMA |D|maxDMAsize| streamNum|dir|p| | | | | | |ds |shr 1|rev Cy | mod |
+ |prio |_|__________|__________|___|_|__|__|__|__|_|_|___|_____|_______|_______|
+ 31 30 29 [28:24] [23:16] 15 14 13 12 11 10 9 8 7 6 5 4 [3:0]
+
+
+ Initialized by the host R/O for the DSP task
+ */
+ u32 strm_rs_config; /* REQUIRED */
+ //
+ /* On mixer input streams: indicates mixer input stream configuration
+ On Tees, this is copied from the stream being snooped
+
+ Stream sample pointer & MAC-unit mode for this stream
+
+ Initialized by the host Updated by the DSP task
+ */
+ u32 strm_buf_ptr; /* REQUIRED */
+
+ /* On mixer input streams: points to next mixer input and is updated by the
+ mixer subroutine in the "parent" DSP task
+ (least-significant 16 bits are preserved, unused)
+
+ On Tees, the pointer is copied from the stream being snooped on
+ initialization, and, subsequently, it is copied into the
+ stream being snooped.
+
+ On wavetable/3D voices: the strmBufPtr will use all 32 bits to allow for
+ fractional phase accumulation
+
+ Fractional increment per output sample in the input sample buffer
+
+ (Not used on mixer input streams & redefined on Tees)
+ On wavetable/3D voices: this 32-bit word specifies the integer.fractional
+ increment per output sample.
+ */
+ u32 strmPhiIncr;
+
+
+ /* Standard stereo volume control
+ Initialized by the host (host updates target volumes)
+
+ Current volumes update by the DSP task
+ On mixer input streams: required & updated by the mixer subroutine in the
+ "parent" DSP task
+
+ On Tees, both current & target volumes are copied up on initialization,
+ and, subsequently, the target volume is copied up while the current
+ volume is copied down.
+
+ These two 32-bit words are redefined for wavetable & 3-D voices.
+ */
+ struct dsp_volume_control vol_ctrl_t; /* Optional */
+};
+
+
+struct dsp_spos_control_block {
+ /* WARNING: Certain items in this structure are modified by the host
+ Any dword that can be modified by the host, must not be
+ modified by the SP as the host can only do atomic dword
+ writes, and to do otherwise, even a read modify write,
+ may lead to corrupted data on the SP.
+
+ This rule does not apply to one off boot time initialisation prior to starting the SP
+ */
+
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ /* First element on the Hyper forground task tree */
+ hfg_tree_root_ptr, /* HOST */
+ /* First 3 dwords are written by the host and read-only on the DSP */
+ hfg_stack_base /* HOST */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ /* Point to this data structure to enable easy access */
+ spos_cb_ptr, /* SP */
+ prev_task_tree_ptr /* SP && HOST */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ /* Currently Unused */
+ xxinterval_timer_period,
+ /* Enable extension of SPOS data structure */
+ HFGSPB_ptr
+ )
+
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ xxnum_HFG_ticks_thisInterval,
+ /* Modified by the DSP */
+ xxnum_tntervals
+ )
+
+
+ /* Set by DSP upon encountering a trap (breakpoint) or a spurious
+ interrupt. The host must clear this dword after reading it
+ upon receiving spInt1. */
+ ___DSP_DUAL_16BIT_ALLOC(
+ spurious_int_flag, /* (Host & SP) Nature of the spurious interrupt */
+ trap_flag /* (Host & SP) Nature of detected Trap */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ unused2,
+ invalid_IP_flag /* (Host & SP ) Indicate detection of invalid instruction pointer */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ /* pointer to forground task tree header for use in next task search */
+ fg_task_tree_hdr_ptr, /* HOST */
+ /* Data structure for controlling synchronous link update */
+ hfg_sync_update_ptr /* HOST */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ begin_foreground_FCNT, /* SP */
+ /* Place holder for holding sleep timing */
+ last_FCNT_before_sleep /* SP */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ unused7, /* SP */
+ next_task_treePtr /* SP */
+ )
+
+ u32 unused5;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ active_flags, /* SP */
+ /* State flags, used to assist control of execution of Hyper Forground */
+ HFG_flags /* SP */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ unused9,
+ unused8
+ )
+
+ /* Space for saving enough context so that we can set up enough
+ to save some more context.
+ */
+ u32 rFE_save_for_invalid_IP;
+ u32 r32_save_for_spurious_int;
+ u32 r32_save_for_trap;
+ u32 r32_save_for_HFG;
+};
+
+/* SPB for MIX_TO_OSTREAM algorithm family */
+struct dsp_mix2_ostream_spb
+{
+ /* 16b.16b integer.frac approximation to the
+ number of 3 sample triplets to output each
+ frame. (approximation must be floor, to
+ insure that the fractional error is always
+ positive)
+ */
+ u32 outTripletsPerFrame;
+
+ /* 16b.16b integer.frac accumulated number of
+ output triplets since the start of group
+ */
+ u32 accumOutTriplets;
+};
+
+/* SCB for Timing master algorithm */
+struct dsp_timing_master_scb {
+ /* First 12 dwords from generic_scb_t */
+ struct dsp_basic_dma_req basic_req; /* Optional */
+ struct dsp_scatter_gather_ext sg_ext; /* Optional */
+ ___DSP_DUAL_16BIT_ALLOC(
+ next_scb, /* REQUIRED */
+ sub_list_ptr /* REQUIRED */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point, /* REQUIRED */
+ this_spb /* REQUIRED */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ /* Initial values are 0000:xxxx */
+ reserved,
+ extra_sample_accum
+ )
+
+
+ /* Initial values are xxxx:0000
+ hi: Current CODEC output FIFO pointer
+ (0 to 0x0f)
+ lo: Flag indicating that the CODEC
+ FIFO is sync'd (host clears to
+ resynchronize the FIFO pointer
+ upon start/restart)
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ codec_FIFO_syncd,
+ codec_FIFO_ptr
+ )
+
+ /* Init. 8000:0005 for 44.1k
+ 8000:0001 for 48k
+ hi: Fractional sample accumulator 0.16b
+ lo: Number of frames remaining to be
+ processed in the current group of
+ frames
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ frac_samp_accum_qm1,
+ TM_frms_left_in_group
+ )
+
+ /* Init. 0001:0005 for 44.1k
+ 0000:0001 for 48k
+ hi: Fractional sample correction factor 0.16b
+ to be added every frameGroupLength frames
+ to correct for truncation error in
+ nsamp_per_frm_q15
+ lo: Number of frames in the group
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ frac_samp_correction_qm1,
+ TM_frm_group_length
+ )
+
+ /* Init. 44.1k*65536/8k = 0x00058333 for 44.1k
+ 48k*65536/8k = 0x00060000 for 48k
+ 16b.16b integer.frac approximation to the
+ number of samples to output each frame.
+ (approximation must be floor, to insure */
+ u32 nsamp_per_frm_q15;
+};
+
+/* SCB for CODEC output algorithm */
+struct dsp_codec_output_scb {
+ /* First 13 dwords from generic_scb_t */
+ struct dsp_basic_dma_req basic_req; /* Optional */
+ struct dsp_scatter_gather_ext sg_ext; /* Optional */
+ ___DSP_DUAL_16BIT_ALLOC(
+ next_scb, /* REQUIRED */
+ sub_list_ptr /* REQUIRED */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point, /* REQUIRED */
+ this_spb /* REQUIRED */
+ )
+
+ u32 strm_rs_config; /* REQUIRED */
+
+ u32 strm_buf_ptr; /* REQUIRED */
+
+ /* NOTE: The CODEC output task reads samples from the first task on its
+ sublist at the stream buffer pointer (init. to lag DMA destination
+ address word). After the required number of samples is transferred,
+ the CODEC output task advances sub_list_ptr->strm_buf_ptr past the samples
+ consumed.
+ */
+
+ /* Init. 0000:0010 for SDout
+ 0060:0010 for SDout2
+ 0080:0010 for SDout3
+ hi: Base IO address of FIFO to which
+ the left-channel samples are to
+ be written.
+ lo: Displacement for the base IO
+ address for left-channel to obtain
+ the base IO address for the FIFO
+ to which the right-channel samples
+ are to be written.
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ left_chan_base_IO_addr,
+ right_chan_IO_disp
+ )
+
+
+ /* Init: 0x0080:0004 for non-AC-97
+ Init: 0x0080:0000 for AC-97
+ hi: Exponential volume change rate
+ for input stream
+ lo: Positive shift count to shift the
+ 16-bit input sample to obtain the
+ 32-bit output word
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ CO_scale_shift_count,
+ CO_exp_vol_change_rate
+ )
+
+ /* Pointer to SCB at end of input chain */
+ ___DSP_DUAL_16BIT_ALLOC(
+ reserved,
+ last_sub_ptr
+ )
+};
+
+/* SCB for CODEC input algorithm */
+struct dsp_codec_input_scb {
+ /* First 13 dwords from generic_scb_t */
+ struct dsp_basic_dma_req basic_req; /* Optional */
+ struct dsp_scatter_gather_ext sg_ext; /* Optional */
+ ___DSP_DUAL_16BIT_ALLOC(
+ next_scb, /* REQUIRED */
+ sub_list_ptr /* REQUIRED */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point, /* REQUIRED */
+ this_spb /* REQUIRED */
+ )
+
+ u32 strm_rs_config; /* REQUIRED */
+ u32 strm_buf_ptr; /* REQUIRED */
+
+ /* NOTE: The CODEC input task reads samples from the hardware FIFO
+ sublist at the DMA source address word (sub_list_ptr->basic_req.saw).
+ After the required number of samples is transferred, the CODEC
+ output task advances sub_list_ptr->basic_req.saw past the samples
+ consumed. SPuD must initialize the sub_list_ptr->basic_req.saw
+ to point half-way around from the initial sub_list_ptr->strm_nuf_ptr
+ to allow for lag/lead.
+ */
+
+ /* Init. 0000:0010 for SDout
+ 0060:0010 for SDout2
+ 0080:0010 for SDout3
+ hi: Base IO address of FIFO to which
+ the left-channel samples are to
+ be written.
+ lo: Displacement for the base IO
+ address for left-channel to obtain
+ the base IO address for the FIFO
+ to which the right-channel samples
+ are to be written.
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ rightChanINdisp,
+ left_chan_base_IN_addr
+ )
+ /* Init. ?:fffc
+ lo: Negative shift count to shift the
+ 32-bit input dword to obtain the
+ 16-bit sample msb-aligned (count
+ is negative to shift left)
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ scaleShiftCount,
+ reserver1
+ )
+
+ u32 reserved2;
+};
+
+
+struct dsp_pcm_serial_input_scb {
+ /* First 13 dwords from generic_scb_t */
+ struct dsp_basic_dma_req basic_req; /* Optional */
+ struct dsp_scatter_gather_ext sg_ext; /* Optional */
+ ___DSP_DUAL_16BIT_ALLOC(
+ next_scb, /* REQUIRED */
+ sub_list_ptr /* REQUIRED */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point, /* REQUIRED */
+ this_spb /* REQUIRED */
+ )
+
+ u32 strm_buf_ptr; /* REQUIRED */
+ u32 strm_rs_config; /* REQUIRED */
+
+ /* Init. Ptr to CODEC input SCB
+ hi: Pointer to the SCB containing the
+ input buffer to which CODEC input
+ samples are written
+ lo: Flag indicating the link to the CODEC
+ input task is to be initialized
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ init_codec_input_link,
+ codec_input_buf_scb
+ )
+
+ /* Initialized by the host (host updates target volumes) */
+ struct dsp_volume_control psi_vol_ctrl;
+
+};
+
+struct dsp_src_task_scb {
+ ___DSP_DUAL_16BIT_ALLOC(
+ frames_left_in_gof,
+ gofs_left_in_sec
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ const2_thirds,
+ num_extra_tnput_samples
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ cor_per_gof,
+ correction_per_sec
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ output_buf_producer_ptr,
+ junk_DMA_MID
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ gof_length,
+ gofs_per_sec
+ )
+
+ u32 input_buf_strm_config;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ reserved_for_SRC_use,
+ input_buf_consumer_ptr
+ )
+
+ u32 accum_phi;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ exp_src_vol_change_rate,
+ input_buf_producer_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ src_next_scb,
+ src_sub_list_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ src_entry_point,
+ src_this_sbp
+ )
+
+ u32 src_strm_rs_config;
+ u32 src_strm_buf_ptr;
+
+ u32 phiIncr6int_26frac;
+
+ struct dsp_volume_control src_vol_ctrl;
+};
+
+struct dsp_decimate_by_pow2_scb {
+ /* decimationFactor = 2, 4, or 8 (larger factors waste too much memory
+ when compared to cascading decimators)
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ dec2_coef_base_ptr,
+ dec2_coef_increment
+ )
+
+ /* coefIncrement = 128 / decimationFactor (for our ROM filter)
+ coefBasePtr = 0x8000 (for our ROM filter)
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ dec2_in_samples_per_out_triplet,
+ dec2_extra_in_samples
+ )
+ /* extraInSamples: # of accumulated, unused input samples (init. to 0)
+ inSamplesPerOutTriplet = 3 * decimationFactor
+ */
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ dec2_const2_thirds,
+ dec2_half_num_taps_mp5
+ )
+ /* halfNumTapsM5: (1/2 number of taps in decimation filter) minus 5
+ const2thirds: constant 2/3 in 16Q0 format (sign.15)
+ */
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ dec2_output_buf_producer_ptr,
+ dec2_junkdma_mid
+ )
+
+ u32 dec2_reserved2;
+
+ u32 dec2_input_nuf_strm_config;
+ /* inputBufStrmConfig: rsConfig for the input buffer to the decimator
+ (buffer size = decimationFactor * 32 dwords)
+ */
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ dec2_phi_incr,
+ dec2_input_buf_consumer_ptr
+ )
+ /* inputBufConsumerPtr: Input buffer read pointer (into SRC filter)
+ phiIncr = decimationFactor * 4
+ */
+
+ u32 dec2_reserved3;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ dec2_exp_vol_change_rate,
+ dec2_input_buf_producer_ptr
+ )
+ /* inputBufProducerPtr: Input buffer write pointer
+ expVolChangeRate: Exponential volume change rate for possible
+ future mixer on input streams
+ */
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ dec2_next_scb,
+ dec2_sub_list_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ dec2_entry_point,
+ dec2_this_spb
+ )
+
+ u32 dec2_strm_rs_config;
+ u32 dec2_strm_buf_ptr;
+
+ u32 dec2_reserved4;
+
+ struct dsp_volume_control dec2_vol_ctrl; /* Not used! */
+};
+
+struct dsp_vari_decimate_scb {
+ ___DSP_DUAL_16BIT_ALLOC(
+ vdec_frames_left_in_gof,
+ vdec_gofs_left_in_sec
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ vdec_const2_thirds,
+ vdec_extra_in_samples
+ )
+ /* extraInSamples: # of accumulated, unused input samples (init. to 0)
+ const2thirds: constant 2/3 in 16Q0 format (sign.15) */
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ vdec_cor_per_gof,
+ vdec_correction_per_sec
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ vdec_output_buf_producer_ptr,
+ vdec_input_buf_consumer_ptr
+ )
+ /* inputBufConsumerPtr: Input buffer read pointer (into SRC filter) */
+ ___DSP_DUAL_16BIT_ALLOC(
+ vdec_gof_length,
+ vdec_gofs_per_sec
+ )
+
+ u32 vdec_input_buf_strm_config;
+ /* inputBufStrmConfig: rsConfig for the input buffer to the decimator
+ (buffer size = 64 dwords) */
+ u32 vdec_coef_increment;
+ /* coefIncrement = - 128.0 / decimationFactor (as a 32Q15 number) */
+
+ u32 vdec_accumphi;
+ /* accumPhi: accumulated fractional phase increment (6.26) */
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ vdec_exp_vol_change_rate,
+ vdec_input_buf_producer_ptr
+ )
+ /* inputBufProducerPtr: Input buffer write pointer
+ expVolChangeRate: Exponential volume change rate for possible
+ future mixer on input streams */
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ vdec_next_scb,
+ vdec_sub_list_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ vdec_entry_point,
+ vdec_this_spb
+ )
+
+ u32 vdec_strm_rs_config;
+ u32 vdec_strm_buf_ptr;
+
+ u32 vdec_phi_incr_6int_26frac;
+
+ struct dsp_volume_control vdec_vol_ctrl;
+};
+
+
+/* SCB for MIX_TO_OSTREAM algorithm family */
+struct dsp_mix2_ostream_scb {
+ /* First 13 dwords from generic_scb_t */
+ struct dsp_basic_dma_req basic_req; /* Optional */
+ struct dsp_scatter_gather_ext sg_ext; /* Optional */
+ ___DSP_DUAL_16BIT_ALLOC(
+ next_scb, /* REQUIRED */
+ sub_list_ptr /* REQUIRED */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point, /* REQUIRED */
+ this_spb /* REQUIRED */
+ )
+
+ u32 strm_rs_config; /* REQUIRED */
+ u32 strm_buf_ptr; /* REQUIRED */
+
+
+ /* hi: Number of mixed-down input triplets
+ computed since start of group
+ lo: Number of frames remaining to be
+ processed in the current group of
+ frames
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ frames_left_in_group,
+ accum_input_triplets
+ )
+
+ /* hi: Exponential volume change rate
+ for mixer on input streams
+ lo: Number of frames in the group
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ frame_group_length,
+ exp_vol_change_rate
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ const_FFFF,
+ const_zero
+ )
+};
+
+
+/* SCB for S16_MIX algorithm */
+struct dsp_mix_only_scb {
+ /* First 13 dwords from generic_scb_t */
+ struct dsp_basic_dma_req basic_req; /* Optional */
+ struct dsp_scatter_gather_ext sg_ext; /* Optional */
+ ___DSP_DUAL_16BIT_ALLOC(
+ next_scb, /* REQUIRED */
+ sub_list_ptr /* REQUIRED */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point, /* REQUIRED */
+ this_spb /* REQUIRED */
+ )
+
+ u32 strm_rs_config; /* REQUIRED */
+ u32 strm_buf_ptr; /* REQUIRED */
+
+ u32 reserved;
+ struct dsp_volume_control vol_ctrl;
+};
+
+/* SCB for the async. CODEC input algorithm */
+struct dsp_async_codec_input_scb {
+ u32 io_free2;
+
+ u32 io_current_total;
+ u32 io_previous_total;
+
+ u16 io_count;
+ u16 io_count_limit;
+
+ u16 o_fifo_base_addr;
+ u16 ost_mo_format;
+ /* 1 = stereo; 0 = mono
+ xxx for ASER 1 (not allowed); 118 for ASER2 */
+
+ u32 ostrm_rs_config;
+ u32 ostrm_buf_ptr;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ io_sclks_per_lr_clk,
+ io_io_enable
+ )
+
+ u32 io_free4;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ io_next_scb,
+ io_sub_list_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ io_entry_point,
+ io_this_spb
+ )
+
+ u32 istrm_rs_config;
+ u32 istrm_buf_ptr;
+
+ /* Init. 0000:8042: for ASER1
+ 0000:8044: for ASER2 */
+ ___DSP_DUAL_16BIT_ALLOC(
+ io_stat_reg_addr,
+ iofifo_pointer
+ )
+
+ /* Init 1 stero:100 ASER1
+ Init 0 mono:110 ASER2
+ */
+ ___DSP_DUAL_16BIT_ALLOC(
+ ififo_base_addr,
+ ist_mo_format
+ )
+
+ u32 i_free;
+};
+
+
+/* SCB for the SP/DIF CODEC input and output */
+struct dsp_spdifiscb {
+ ___DSP_DUAL_16BIT_ALLOC(
+ status_ptr,
+ status_start_ptr
+ )
+
+ u32 current_total;
+ u32 previous_total;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ count,
+ count_limit
+ )
+
+ u32 status_data;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ status,
+ free4
+ )
+
+ u32 free3;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ free2,
+ bit_count
+ )
+
+ u32 temp_status;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ next_SCB,
+ sub_list_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point,
+ this_spb
+ )
+
+ u32 strm_rs_config;
+ u32 strm_buf_ptr;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ stat_reg_addr,
+ fifo_pointer
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ fifo_base_addr,
+ st_mo_format
+ )
+
+ u32 free1;
+};
+
+
+/* SCB for the SP/DIF CODEC input and output */
+struct dsp_spdifoscb {
+
+ u32 free2;
+
+ u32 free3[4];
+
+ /* Need to be here for compatibility with AsynchFGTxCode */
+ u32 strm_rs_config;
+
+ u32 strm_buf_ptr;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ status,
+ free5
+ )
+
+ u32 free4;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ next_scb,
+ sub_list_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point,
+ this_spb
+ )
+
+ u32 free6[2];
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ stat_reg_addr,
+ fifo_pointer
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ fifo_base_addr,
+ st_mo_format
+ )
+
+ u32 free1;
+};
+
+
+struct dsp_asynch_fg_rx_scb {
+ ___DSP_DUAL_16BIT_ALLOC(
+ bot_buf_mask,
+ buf_Mask
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ max,
+ min
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ old_producer_pointer,
+ hfg_scb_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ delta,
+ adjust_count
+ )
+
+ u32 unused2[5];
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ sibling_ptr,
+ child_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ code_ptr,
+ this_ptr
+ )
+
+ u32 strm_rs_config;
+
+ u32 strm_buf_ptr;
+
+ u32 unused_phi_incr;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ right_targ,
+ left_targ
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ right_vol,
+ left_vol
+ )
+};
+
+
+struct dsp_asynch_fg_tx_scb {
+ ___DSP_DUAL_16BIT_ALLOC(
+ not_buf_mask,
+ buf_mask
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ max,
+ min
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ unused1,
+ hfg_scb_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ delta,
+ adjust_count
+ )
+
+ u32 accum_phi;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ unused2,
+ const_one_third
+ )
+
+ u32 unused3[3];
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ sibling_ptr,
+ child_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ codePtr,
+ this_ptr
+ )
+
+ u32 strm_rs_config;
+
+ u32 strm_buf_ptr;
+
+ u32 phi_incr;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ unused_right_targ,
+ unused_left_targ
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ unused_right_vol,
+ unused_left_vol
+ )
+};
+
+
+struct dsp_output_snoop_scb {
+ /* First 13 dwords from generic_scb_t */
+ struct dsp_basic_dma_req basic_req; /* Optional */
+ struct dsp_scatter_gather_ext sg_ext; /* Optional */
+ ___DSP_DUAL_16BIT_ALLOC(
+ next_scb, /* REQUIRED */
+ sub_list_ptr /* REQUIRED */
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point, /* REQUIRED */
+ this_spb /* REQUIRED */
+ )
+
+ u32 strm_rs_config; /* REQUIRED */
+ u32 strm_buf_ptr; /* REQUIRED */
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ init_snoop_input_link,
+ snoop_child_input_scb
+ )
+
+ u32 snoop_input_buf_ptr;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ reserved,
+ input_scb
+ )
+};
+
+struct dsp_spio_write_scb {
+ ___DSP_DUAL_16BIT_ALLOC(
+ address1,
+ address2
+ )
+
+ u32 data1;
+
+ u32 data2;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ address3,
+ address4
+ )
+
+ u32 data3;
+
+ u32 data4;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ unused1,
+ data_ptr
+ )
+
+ u32 unused2[2];
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ sibling_ptr,
+ child_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point,
+ this_ptr
+ )
+
+ u32 unused3[5];
+};
+
+struct dsp_magic_snoop_task {
+ u32 i0;
+ u32 i1;
+
+ u32 strm_buf_ptr1;
+
+ u16 i2;
+ u16 snoop_scb;
+
+ u32 i3;
+ u32 i4;
+ u32 i5;
+ u32 i6;
+
+ u32 i7;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ next_scb,
+ sub_list_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point,
+ this_ptr
+ )
+
+ u32 strm_buf_config;
+ u32 strm_buf_ptr2;
+
+ u32 i8;
+
+ struct dsp_volume_control vdec_vol_ctrl;
+};
+
+
+struct dsp_filter_scb {
+ ___DSP_DUAL_16BIT_ALLOC(
+ a0_right, /* 0x00 */
+ a0_left
+ )
+ ___DSP_DUAL_16BIT_ALLOC(
+ a1_right, /* 0x01 */
+ a1_left
+ )
+ ___DSP_DUAL_16BIT_ALLOC(
+ a2_right, /* 0x02 */
+ a2_left
+ )
+ ___DSP_DUAL_16BIT_ALLOC(
+ output_buf_ptr, /* 0x03 */
+ init
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ filter_unused3, /* 0x04 */
+ filter_unused2
+ )
+
+ u32 prev_sample_output1; /* 0x05 */
+ u32 prev_sample_output2; /* 0x06 */
+ u32 prev_sample_input1; /* 0x07 */
+ u32 prev_sample_input2; /* 0x08 */
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ next_scb_ptr, /* 0x09 */
+ sub_list_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ entry_point, /* 0x0A */
+ spb_ptr
+ )
+
+ u32 strm_rs_config; /* 0x0B */
+ u32 strm_buf_ptr; /* 0x0C */
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ b0_right, /* 0x0D */
+ b0_left
+ )
+ ___DSP_DUAL_16BIT_ALLOC(
+ b1_right, /* 0x0E */
+ b1_left
+ )
+ ___DSP_DUAL_16BIT_ALLOC(
+ b2_right, /* 0x0F */
+ b2_left
+ )
+};
+#endif /* __DSP_SCB_TYPES_H__ */
diff --git a/sound/pci/cs46xx/cs46xx_dsp_spos.h b/sound/pci/cs46xx/cs46xx_dsp_spos.h
new file mode 100644
index 000000000000..8008c59288a6
--- /dev/null
+++ b/sound/pci/cs46xx/cs46xx_dsp_spos.h
@@ -0,0 +1,234 @@
+/*
+ * The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __CS46XX_DSP_SPOS_H__
+#define __CS46XX_DSP_SPOS_H__
+
+#include "cs46xx_dsp_scb_types.h"
+#include "cs46xx_dsp_task_types.h"
+
+#define SYMBOL_CONSTANT 0x0
+#define SYMBOL_SAMPLE 0x1
+#define SYMBOL_PARAMETER 0x2
+#define SYMBOL_CODE 0x3
+
+#define SEGTYPE_SP_PROGRAM 0x00000001
+#define SEGTYPE_SP_PARAMETER 0x00000002
+#define SEGTYPE_SP_SAMPLE 0x00000003
+#define SEGTYPE_SP_COEFFICIENT 0x00000004
+
+#define DSP_SPOS_UU 0x0deadul /* unused */
+#define DSP_SPOS_DC 0x0badul /* don't care */
+#define DSP_SPOS_DC_DC 0x0bad0badul /* don't care */
+#define DSP_SPOS_UUUU 0xdeadc0edul /* unused */
+#define DSP_SPOS_UUHI 0xdeadul
+#define DSP_SPOS_UULO 0xc0edul
+#define DSP_SPOS_DCDC 0x0badf1d0ul /* don't care */
+#define DSP_SPOS_DCDCHI 0x0badul
+#define DSP_SPOS_DCDCLO 0xf1d0ul
+
+#define DSP_MAX_TASK_NAME 60
+#define DSP_MAX_SYMBOL_NAME 100
+#define DSP_MAX_SCB_NAME 60
+#define DSP_MAX_SCB_DESC 200
+#define DSP_MAX_TASK_DESC 50
+
+#define DSP_MAX_PCM_CHANNELS 32
+#define DSP_MAX_SRC_NR 14
+
+#define DSP_PCM_MAIN_CHANNEL 1
+#define DSP_PCM_REAR_CHANNEL 2
+#define DSP_PCM_CENTER_LFE_CHANNEL 3
+#define DSP_PCM_S71_CHANNEL 4 /* surround 7.1 */
+#define DSP_IEC958_CHANNEL 5
+
+#define DSP_SPDIF_STATUS_OUTPUT_ENABLED 1
+#define DSP_SPDIF_STATUS_PLAYBACK_OPEN 2
+#define DSP_SPDIF_STATUS_HW_ENABLED 4
+#define DSP_SPDIF_STATUS_INPUT_CTRL_ENABLED 8
+
+struct dsp_symbol_entry {
+ u32 address;
+ char symbol_name[DSP_MAX_SYMBOL_NAME];
+ int symbol_type;
+
+ /* initialized by driver */
+ struct dsp_module_desc * module;
+ int deleted;
+};
+
+struct dsp_symbol_desc {
+ int nsymbols;
+
+ struct dsp_symbol_entry *symbols;
+
+ /* initialized by driver */
+ int highest_frag_index;
+};
+
+struct dsp_segment_desc {
+ int segment_type;
+ u32 offset;
+ u32 size;
+ u32 * data;
+};
+
+struct dsp_module_desc {
+ char * module_name;
+ struct dsp_symbol_desc symbol_table;
+ int nsegments;
+ struct dsp_segment_desc * segments;
+
+ /* initialized by driver */
+ u32 overlay_begin_address;
+ u32 load_address;
+ int nfixups;
+};
+
+struct dsp_scb_descriptor {
+ char scb_name[DSP_MAX_SCB_NAME];
+ u32 address;
+ int index;
+ u32 *data;
+
+ struct dsp_scb_descriptor * sub_list_ptr;
+ struct dsp_scb_descriptor * next_scb_ptr;
+ struct dsp_scb_descriptor * parent_scb_ptr;
+
+ struct dsp_symbol_entry * task_entry;
+ struct dsp_symbol_entry * scb_symbol;
+
+ struct snd_info_entry *proc_info;
+ int ref_count;
+
+ u16 volume[2];
+ unsigned int deleted :1;
+ unsigned int updated :1;
+ unsigned int volume_set :1;
+};
+
+struct dsp_task_descriptor {
+ char task_name[DSP_MAX_TASK_NAME];
+ int size;
+ u32 address;
+ int index;
+ u32 *data;
+};
+
+struct dsp_pcm_channel_descriptor {
+ int active;
+ int src_slot;
+ int pcm_slot;
+ u32 sample_rate;
+ u32 unlinked;
+ struct dsp_scb_descriptor * pcm_reader_scb;
+ struct dsp_scb_descriptor * src_scb;
+ struct dsp_scb_descriptor * mixer_scb;
+
+ void * private_data;
+};
+
+struct dsp_spos_instance {
+ struct dsp_symbol_desc symbol_table; /* currently available loaded symbols in SP */
+
+ int nmodules;
+ struct dsp_module_desc * modules; /* modules loaded into SP */
+
+ struct dsp_segment_desc code;
+
+ /* Main PCM playback mixer */
+ struct dsp_scb_descriptor * master_mix_scb;
+ u16 dac_volume_right;
+ u16 dac_volume_left;
+
+ /* Rear/surround PCM playback mixer */
+ struct dsp_scb_descriptor * rear_mix_scb;
+
+ /* Center/LFE mixer */
+ struct dsp_scb_descriptor * center_lfe_mix_scb;
+
+ int npcm_channels;
+ int nsrc_scb;
+ struct dsp_pcm_channel_descriptor pcm_channels[DSP_MAX_PCM_CHANNELS];
+ int src_scb_slots[DSP_MAX_SRC_NR];
+
+ /* cache this symbols */
+ struct dsp_symbol_entry * null_algorithm; /* used by PCMreaderSCB's */
+ struct dsp_symbol_entry * s16_up; /* used by SRCtaskSCB's */
+
+ /* proc fs */
+ struct snd_card *snd_card;
+ struct snd_info_entry * proc_dsp_dir;
+ struct snd_info_entry * proc_sym_info_entry;
+ struct snd_info_entry * proc_modules_info_entry;
+ struct snd_info_entry * proc_parameter_dump_info_entry;
+ struct snd_info_entry * proc_sample_dump_info_entry;
+
+ /* SCB's descriptors */
+ int nscb;
+ int scb_highest_frag_index;
+ struct dsp_scb_descriptor scbs[DSP_MAX_SCB_DESC];
+ struct snd_info_entry * proc_scb_info_entry;
+ struct dsp_scb_descriptor * the_null_scb;
+
+ /* Task's descriptors */
+ int ntask;
+ struct dsp_task_descriptor tasks[DSP_MAX_TASK_DESC];
+ struct snd_info_entry * proc_task_info_entry;
+
+ /* SPDIF status */
+ int spdif_status_out;
+ int spdif_status_in;
+ u16 spdif_input_volume_right;
+ u16 spdif_input_volume_left;
+ /* spdif channel status,
+ left right and user validity bits */
+ unsigned int spdif_csuv_default;
+ unsigned int spdif_csuv_stream;
+
+ /* SPDIF input sample rate converter */
+ struct dsp_scb_descriptor * spdif_in_src;
+ /* SPDIF input asynch. receiver */
+ struct dsp_scb_descriptor * asynch_rx_scb;
+
+ /* Capture record mixer SCB */
+ struct dsp_scb_descriptor * record_mixer_scb;
+
+ /* CODEC input SCB */
+ struct dsp_scb_descriptor * codec_in_scb;
+
+ /* reference snooper */
+ struct dsp_scb_descriptor * ref_snoop_scb;
+
+ /* SPDIF output PCM reference */
+ struct dsp_scb_descriptor * spdif_pcm_input_scb;
+
+ /* asynch TX task */
+ struct dsp_scb_descriptor * asynch_tx_scb;
+
+ /* record sources */
+ struct dsp_scb_descriptor * pcm_input;
+ struct dsp_scb_descriptor * adc_input;
+
+ int spdif_in_sample_rate;
+};
+
+#endif /* __DSP_SPOS_H__ */
diff --git a/sound/pci/cs46xx/cs46xx_dsp_task_types.h b/sound/pci/cs46xx/cs46xx_dsp_task_types.h
new file mode 100644
index 000000000000..5cf920bfda27
--- /dev/null
+++ b/sound/pci/cs46xx/cs46xx_dsp_task_types.h
@@ -0,0 +1,252 @@
+/*
+ * The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * NOTE: comments are copy/paste from cwcemb80.lst
+ * provided by Tom Woller at Cirrus (my only
+ * documentation about the SP OS running inside
+ * the DSP)
+ */
+
+#ifndef __CS46XX_DSP_TASK_TYPES_H__
+#define __CS46XX_DSP_TASK_TYPES_H__
+
+#include "cs46xx_dsp_scb_types.h"
+
+/*********************************************************************************************
+Example hierarchy of stream control blocks in the SP
+
+hfgTree
+Ptr____Call (c)
+ \
+ -------+------ ------------- ------------- ------------- -----
+| SBlaster IF |______\| Foreground |___\| Middlegr'nd |___\| Background |___\| Nul |
+| |Goto /| tree header |g /| tree header |g /| tree header |g /| SCB |r
+ -------------- (g) ------------- ------------- ------------- -----
+ |c |c |c |c
+ | | | |
+ \/ ------------- ------------- -------------
+ | Foreground |_\ | Middlegr'nd |_\ | Background |_\
+ | tree |g/ | tree |g/ | tree |g/
+ ------------- ------------- -------------
+ |c |c |c
+ | | |
+ \/ \/ \/
+
+*********************************************************************************************/
+
+#define HFG_FIRST_EXECUTE_MODE 0x0001
+#define HFG_FIRST_EXECUTE_MODE_BIT 0
+#define HFG_CONTEXT_SWITCH_MODE 0x0002
+#define HFG_CONTEXT_SWITCH_MODE_BIT 1
+
+#define MAX_FG_STACK_SIZE 32 /* THESE NEED TO BE COMPUTED PROPERLY */
+#define MAX_MG_STACK_SIZE 16
+#define MAX_BG_STACK_SIZE 9
+#define MAX_HFG_STACK_SIZE 4
+
+#define SLEEP_ACTIVE_INCREMENT 0 /* Enable task tree thread to go to sleep
+ This should only ever be used on the Background thread */
+#define STANDARD_ACTIVE_INCREMENT 1 /* Task tree thread normal operation */
+#define SUSPEND_ACTIVE_INCREMENT 2 /* Cause execution to suspend in the task tree thread
+ This should only ever be used on the Background thread */
+
+#define HOSTFLAGS_DISABLE_BG_SLEEP 0 /* Host-controlled flag that determines whether we go to sleep
+ at the end of BG */
+
+/* Minimal context save area for Hyper Forground */
+struct dsp_hf_save_area {
+ u32 r10_save;
+ u32 r54_save;
+ u32 r98_save;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ status_save,
+ ind_save
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ rci1_save,
+ rci0_save
+ )
+
+ u32 r32_save;
+ u32 r76_save;
+ u32 rsd2_save;
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ rsi2_save, /* See TaskTreeParameterBlock for
+ remainder of registers */
+ rsa2Save
+ )
+ /* saved as part of HFG context */
+};
+
+
+/* Task link data structure */
+struct dsp_tree_link {
+ ___DSP_DUAL_16BIT_ALLOC(
+ /* Pointer to sibling task control block */
+ next_scb,
+ /* Pointer to child task control block */
+ sub_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ /* Pointer to code entry point */
+ entry_point,
+ /* Pointer to local data */
+ this_spb
+ )
+};
+
+
+struct dsp_task_tree_data {
+ ___DSP_DUAL_16BIT_ALLOC(
+ /* Initial tock count; controls task tree execution rate */
+ tock_count_limit,
+ /* Tock down counter */
+ tock_count
+ )
+
+ /* Add to ActiveCount when TockCountLimit reached:
+ Subtract on task tree termination */
+ ___DSP_DUAL_16BIT_ALLOC(
+ active_tncrement,
+ /* Number of pending activations for task tree */
+ active_count
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ /* BitNumber to enable modification of correct bit in ActiveTaskFlags */
+ active_bit,
+ /* Pointer to OS location for indicating current activity on task level */
+ active_task_flags_ptr
+ )
+
+ /* Data structure for controlling movement of memory blocks:-
+ currently unused */
+ ___DSP_DUAL_16BIT_ALLOC(
+ mem_upd_ptr,
+ /* Data structure for controlling synchronous link update */
+ link_upd_ptr
+ )
+
+ ___DSP_DUAL_16BIT_ALLOC(
+ /* Save area for remainder of full context. */
+ save_area,
+ /* Address of start of local stack for data storage */
+ data_stack_base_ptr
+ )
+
+};
+
+
+struct dsp_interval_timer_data
+{
+ /* These data items have the same relative locations to those */
+ ___DSP_DUAL_16BIT_ALLOC(
+ interval_timer_period,
+ itd_unused
+ )
+
+ /* used for this data in the SPOS control block for SPOS 1.0 */
+ ___DSP_DUAL_16BIT_ALLOC(
+ num_FG_ticks_this_interval,
+ num_intervals
+ )
+};
+
+
+/* This structure contains extra storage for the task tree
+ Currently, this additional data is related only to a full context save */
+struct dsp_task_tree_context_block {
+ /* Up to 10 values are saved onto the stack. 8 for the task tree, 1 for
+ The access to the context switch (call or interrupt), and 1 spare that
+ users should never use. This last may be required by the system */
+ ___DSP_DUAL_16BIT_ALLOC(
+ stack1,
+ stack0
+ )
+ ___DSP_DUAL_16BIT_ALLOC(
+ stack3,
+ stack2
+ )
+ ___DSP_DUAL_16BIT_ALLOC(
+ stack5,
+ stack4
+ )
+ ___DSP_DUAL_16BIT_ALLOC(
+ stack7,
+ stack6
+ )
+ ___DSP_DUAL_16BIT_ALLOC(
+ stack9,
+ stack8
+ )
+
+ u32 saverfe;
+
+ /* Value may be overwriten by stack save algorithm.
+ Retain the size of the stack data saved here if used */
+ ___DSP_DUAL_16BIT_ALLOC(
+ reserved1,
+ stack_size
+ )
+ u32 saverba; /* (HFG) */
+ u32 saverdc;
+ u32 savers_config_23; /* (HFG) */
+ u32 savers_DMA23; /* (HFG) */
+ u32 saversa0;
+ u32 saversi0;
+ u32 saversa1;
+ u32 saversi1;
+ u32 saversa3;
+ u32 saversd0;
+ u32 saversd1;
+ u32 saversd3;
+ u32 savers_config01;
+ u32 savers_DMA01;
+ u32 saveacc0hl;
+ u32 saveacc1hl;
+ u32 saveacc0xacc1x;
+ u32 saveacc2hl;
+ u32 saveacc3hl;
+ u32 saveacc2xacc3x;
+ u32 saveaux0hl;
+ u32 saveaux1hl;
+ u32 saveaux0xaux1x;
+ u32 saveaux2hl;
+ u32 saveaux3hl;
+ u32 saveaux2xaux3x;
+ u32 savershouthl;
+ u32 savershoutxmacmode;
+};
+
+
+struct dsp_task_tree_control_block {
+ struct dsp_hf_save_area context;
+ struct dsp_tree_link links;
+ struct dsp_task_tree_data data;
+ struct dsp_task_tree_context_block context_blk;
+ struct dsp_interval_timer_data int_timer;
+};
+
+
+#endif /* __DSP_TASK_TYPES_H__ */
diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c
index 4fa53161b094..f75f5ffdfdfb 100644
--- a/sound/pci/cs46xx/cs46xx_lib.c
+++ b/sound/pci/cs46xx/cs46xx_lib.c
@@ -61,7 +61,7 @@
#include <sound/info.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
-#include <sound/cs46xx.h>
+#include "cs46xx.h"
#include <asm/io.h>
@@ -3599,9 +3599,10 @@ static unsigned int saved_regs[] = {
BA1_CVOL,
};
-int snd_cs46xx_suspend(struct pci_dev *pci, pm_message_t state)
+static int snd_cs46xx_suspend(struct device *dev)
{
- struct snd_card *card = pci_get_drvdata(pci);
+ struct pci_dev *pci = to_pci_dev(dev);
+ struct snd_card *card = dev_get_drvdata(dev);
struct snd_cs46xx *chip = card->private_data;
int i, amp_saved;
@@ -3628,13 +3629,14 @@ int snd_cs46xx_suspend(struct pci_dev *pci, pm_message_t state)
pci_disable_device(pci);
pci_save_state(pci);
- pci_set_power_state(pci, pci_choose_state(pci, state));
+ pci_set_power_state(pci, PCI_D3hot);
return 0;
}
-int snd_cs46xx_resume(struct pci_dev *pci)
+static int snd_cs46xx_resume(struct device *dev)
{
- struct snd_card *card = pci_get_drvdata(pci);
+ struct pci_dev *pci = to_pci_dev(dev);
+ struct snd_card *card = dev_get_drvdata(dev);
struct snd_cs46xx *chip = card->private_data;
int amp_saved;
#ifdef CONFIG_SND_CS46XX_NEW_DSP
@@ -3707,6 +3709,8 @@ int snd_cs46xx_resume(struct pci_dev *pci)
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
}
+
+SIMPLE_DEV_PM_OPS(snd_cs46xx_pm, snd_cs46xx_suspend, snd_cs46xx_resume);
#endif /* CONFIG_PM */
diff --git a/sound/pci/cs46xx/dsp_spos.c b/sound/pci/cs46xx/dsp_spos.c
index e377287192aa..56fec0bc0efb 100644
--- a/sound/pci/cs46xx/dsp_spos.c
+++ b/sound/pci/cs46xx/dsp_spos.c
@@ -32,7 +32,7 @@
#include <sound/control.h>
#include <sound/info.h>
#include <sound/asoundef.h>
-#include <sound/cs46xx.h>
+#include "cs46xx.h"
#include "cs46xx_lib.h"
#include "dsp_spos.h"
diff --git a/sound/pci/cs46xx/dsp_spos_scb_lib.c b/sound/pci/cs46xx/dsp_spos_scb_lib.c
index 00b148a10239..c2c695b07f8c 100644
--- a/sound/pci/cs46xx/dsp_spos_scb_lib.c
+++ b/sound/pci/cs46xx/dsp_spos_scb_lib.c
@@ -31,7 +31,7 @@
#include <sound/core.h>
#include <sound/control.h>
#include <sound/info.h>
-#include <sound/cs46xx.h>
+#include "cs46xx.h"
#include "cs46xx_lib.h"
#include "dsp_spos.h"
OpenPOWER on IntegriCloud